How to check if the remote VPN failover is configured

Similar Questions

• How to check if the address pool is used by the vpn client

  Hello world

  I need config anyconnect VPN on ASA existing who also owns the remote VPN client running.

  Under the ASDM when I click the address pools

  I see two address pools

  Pooldefault that I can see is used by vpn distance courses.

  PoolX - this subnet is not assigned to the user now.

  Is there a way I can check if PoolX subnet is configured to assign the IP address to the remote VPN?

  Concerning

  MAhesh

  Hello

  On the CLI, you could check the output of

  See establishing group policy enforcement

  and

  See the tunnel-group race

  to see if the PoolX is used nowhere in the VPN configurations.

  Of course, you can also just simply look for the configuration and see if there is anything else than the current configuration of the PoolX on the SAA.

  See the race | PoolX Inc.

  This should probably display only the command "ip local pool ' if the address pool has just been created but is not used anywhere.

  -Jouni

• QuickVPN - could not do a ping the remote VPN router!

  Hello

  I have a RV042 (VPN router) and I have some problems to run properly using the QuickVPN client.

  Here is the Log of the QuickVPN client.

  2008-10-15 20:14:38 [STATUS] a network interface detected with 192.168.0.104 IP address
  2008-10-15 20:14:38 [STATUS] connection...
  2008-10-15 20:14:38 [STATUS] connection to a remote gateway with IP address: 96.20.174.84
  2008-10-15 20:14:38 [WARNING] server certificate does not exist on your local computer.
  2008-10-15 20:14:44 remote gateway [STATE] has been reached with https...
  2008-10-15 20:14:44 [STATUS] commissioning...
  2008-10-15 20:14:51 [STATUS] Tunnel is connected successfully.
  2008-10-15 20:14:51 [STATUS] verification of network...
  2008-10-15 20:14:55 [WARNING] failed to do a ping the remote VPN router!
  2008-10-15 20:14:58 [WARNING] failed to do a ping the remote VPN router!
  2008-10-15 20:15:01 [WARNING] failed to do a ping the remote VPN router!
  2008-10-15 20:15:05 [WARNING] failed to do a ping the remote VPN router!
  2008-10-15 20:15:08 [WARNING] failed to do a ping the remote VPN router!
  2008-10-15 20:15:11 [WARNING] Ping has been blocked, which can be caused by an unexpected disconnection.
  2008-10-15 20:15:19 [STATUS] disconnection...
  2008-10-15 20:15:25 [STATUS] Tunnel is disconnected successfully.

  I don't know how it is implemented, but if WuickVPN wait a form ping my router, it will not happen. I was never able to ping my router ouside of my ISP network.

  There is a way to disable the Ping process and continue with the VPN connection?

  QuickVPN try ping on the router via the VPN tunnel to check the connection. It should work without worrying about whether your ISP filters ICMP messages or not. The tunnel is encrypted your ISP won't know what you're doing.

  Please post the corresponding on the RV042 VPN log. That is expected to see how far you get.

  You have a firewall running on the computer? I think that some firewalls have difficulty with the traffic of ESP.

  What is the router that is connected to the computer? How is it that is configured?

• My MacBook Pro suddenly becomes very slow, accepting orders very slow how to check if the ram is working properly

  My MacBook Pro suddenly becomes very slow, accepting orders very slow how to check if the ram is working properly

  You can try this download.   Etrecheck.   https://etrecheck.com/#about

  Then publish the report as a reply in this thread.

  It will allow us to review your system without disclosing a private matter.

• What ever the data that we are loading in HFM, how to check if the data are correct or not?

  Hello!

  This is SANDEEP, I loaded data using FDM in HFM. How to check if the data is correct or not, what ever the data I was responsible in HFM.

  Please tell me how to recover the data and what format, clearly can you me the data verification process step by step.

  It would be useful for me...

  Thanks in advance...

  Kind regards

  SANDEEP

  Hi Sandeep,

  I think the best way is to extract data from HFM for the same POV that you have loaded FDM and check if it is the same.

  If you then use HFM 11.1.2.x version

  1. login to the application and go to the menu Administration / extract / data.

  2. set the POV that you have loaded the data, then unzip it. You can open the file unzipped in a notebook

  3. you can compare the file with the data file generated by FDMEE under Outbox folder.

  But what would you give all the data corresponding to the POV that you set. So please ensure that you have the correct POV, defined according to the export FDMEE.

  Thank you

  Chandra

• How knowledge/check if the RMAN backup was performed using a current control file or database catalog?

  Hello

  How knowledge/check if the RMAN backup was performed using a current control file or database catalog? I mean RMAN prompt or sqlplus is it possible to know.

  Thank you

  You're welcome my friend

  You can see them using two methods.

  as I mentioned above, you can see them connect to the catalog database and you can query using the view that I sent

  http://docs.Oracle.com/CD/E11882_01/backup.112/e10642/rcmreprt.htm#BRADV89601

  the other method is the list command, you must use the list command after connecting using rman "rman target / catalog cat_user/cat_pass@catdbtns" command

  http://docs.Oracle.com/CD/E11882_01/backup.112/e10642/rcmreprt.htm#BRADV8136

  Check the value of the control_file_record_keep_time parameter. The default value is 7 days. in the output of the list command, if you can see the old backups to the value, you must be sure that the backup information comes from the catalogue database

  SELECT * FROM parameter $ v where name = 'control_file_record_keep_time '.

  an example of command list

  the list of completed database before backup ' sysdate-10'.

  Concerning

• How to check if the acrobat adobe pro xi is enabled

  How to check if the acrobat adobe pro xi is enabled

  Hi Shubham,

  If the product is activated it will give the option to disable under the Help menu. Also whenever you launch Acrobat it will bring activation window if it requires one.

  Thank you

  Abhishek

• How to check on the website of Adobe Creative Suite 6 Design & Web Premium (student version)?

  How to check on the website of Adobe Creative Suite 6 Design & Web Premium (student version)? I don't find the sea site.

  Check what... your serial number?

  Your serial number appears on your account page?

  https://www.adobe.com/account.html for numbers on your page from Adobe

  Or do you want to download? Other downloads

• How to check if the database for DRDA gateway is installed and configured.

  Hi all
  
  How can we check if the database for DRDA gateway is installed and configured.
  
  Our operating system is AIX 5 L 64 bit OS.
  RDBMS: 11.2.0.3
  
  Kind regards

  Duplicated
  How to check if the database for DRDA gateway is installed and configured.

  + - locked thread-+.

  Nicolas.

• How to check if the selection is any text tho:

  Ok.. Another question:

  How to check if the selection is any text tho:

      if (app.documents.length != 0 && app.selection.length != 0 && 
       (app.selection[0].constructor.name=="Text"||app.selection[0].constructor.name=="Paragraph")) 

  but sometimes the selection is 'textStyleRange', sometimes 'character' etc. is there a shortcut to check both?

  I usually do something like this:

  if ( app.documents.length && app.selection.length && app.selection [ 0 ].hasOwnProperty ( 'baseline' ) )
       alert ( "It's a text!" );
  

  Hope that helps.

  --

  Marijan (tomaxxi)

  http://tomaxxi.com

• How to check if the support is rtmp or hds or progressive download?

  How to check if the support is rtmp or hds or progressive download?

  There is no direct way to do it.

  I remember that there is a similar code in the code of StobeMediaPlayer, in PlaybackOtpimization*.as

  Can I ask what you use it for? You should know what you're playing.

• How to check for the two first digits?

  Can someone please... There is demand to have a hidden field on the form that will be filled with data. It's going to be 6 digits long and could start with 02 or 04. I need to check on the DocReady event, for the first two digits. If the first two digits are 02, the presentation of the form will remain as it is. If the first two numbers are 04, I'll have to show two hidden subforms. Can someone please provide an explanation on how to check for the first two digits of field 6 digits and do some actions.

  Thank you very much

  No, only in the event: Exchange.

• How to check if the directory is created using create or replace directory

  Hello
  
  I create a directory like below:
  
  Create or replace directory TEST_DIR AS 'C:\ABCD '.
  
  How to check if the directory is created or not? Is there any request for it?
  
  Thanks in advance.
  
  PK

  SELECT * FROM ALL_DIRECTORIES WHERE DIRECTORY_NAME LIKE '% TEST_DIR %. "

  Published by: user3522507 on 2010.06.16. 07:19

• R12.1.1 staging is complete! How to check if the scene is good

  Hi Gurusl,
  
  I finished the staging R12.1.1 for Hp unix B.11.31. I want to know how to check if the scene is good for installation or if it is corrupt. Is there a metalink note or the script from where we can check it out. your help will be very appreciated. Thanks in advance
  
  Kind regards

  Hello

  Please refer to (Note: 802195,1 - checksums MD5 for R12.1.1 Quick Install Media).

  Kind regards
  Hussein

• How to check if the persistence Unit objects are persistent or not?

  How to check if the persistence Unit objects are persistent or not?
  
  I have correctly set up and deploy the object used as a persistence in Oracle coherence unit according to the guide Chapter 6 of tutorial for Oracle coherence 3.5
  Using the RunEmployeeExample script, I had good results. I see that once the cache object is updated, the database table (employees) is also updated accordingly. Here is the result:

  2009-11-05 11:09:55.043/53.467 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): Member(Id=2, Timestamp=2009-11-05 11:09:54.867, Add
  ress=192.168.8.80:8089, MachineId=24656, Location=process:1684, Role=OracleRunEmployeeExample) joined Cluster with senior member 1
  2009-11-05 11:09:55.604/54.028 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): Member 2 joined Service Management with senior memb
  er 1
  2009-11-05 11:09:56.885/55.309 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): TcpRing: connecting to member 2 using TcpSocket{Sta
  te=STATE_OPEN, Socket=Socket[addr=/192.168.8.80,port=8089,localport=4084]}
  2009-11-05 11:09:57.847/56.281 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): Member 2 joined Service JpaDistributedCache with se
  nior member 1
  2009-11-05 11:09:57.917/56.341 Oracle Coherence GE 3.5.2/463 <D5> (thread=DistributedCache:JpaDistributedCache, member=1): Service JpaDistributed
  Cache: sending ServiceConfigSync containing 258 entries to Member 2
  2009-11-05 11:10:04.086/62.510 Oracle Coherence GE 3.5.2/463 <D5> (thread=DistributedCache:JpaDistributedCache, member=1): Deferring the distribu
  tion due to 1 pending configuration updates
  [EL Info]: 2009-11-05 11:10:14.36--ServerSession(2883071)--EclipseLink, version: Eclipse Persistence Services - 1.1.1.v20090430-r4097
  [EL Info]: 2009-11-05 11:10:22.312--ServerSession(2883071)--file:/C:/JDeveloper/mywork/AppJPA/JPA/classes/-JPA login successful
  2009-11-05 11:10:24.305/82.729 Oracle Coherence GE 3.5.2/463 <D5> (thread=DistributedCache:JpaDistributedCache, member=1): 3> Transferring 128 ou
  t of 257 primary partitions to member 2 requesting 128
  2009-11-05 11:10:25.697/84.121 Oracle Coherence GE 3.5.2/463 <D4> (thread=DistributedCache:JpaDistributedCache, member=1): 1> Transferring 129 ou
  t of 129 partitions to a node-safe backup 1 at member 2 (under 129)
  2009-11-05 11:10:25.857/84.281 Oracle Coherence GE 3.5.2/463 <D5> (thread=DistributedCache:JpaDistributedCache, member=1): Transferring 0KB of ba
  ckup[1] for PartitionSet{128, 129, 130, 131, 132, 133, 134, 135, 136, 137, 138, 139, 140, 141, 142, 143, 144, 145, 146, 147, 148, 149, 150, 151,
  152, 153, 154, 155, 156, 157, 158, 159, 160, 161, 162, 163, 164, 165, 166, 167, 168, 169, 170, 171, 172, 173, 174, 175, 176, 177, 178, 179, 180,
  181, 182, 183, 184, 185, 186, 187, 188, 189, 190, 191, 192, 193, 194, 195, 196, 197, 198, 199, 200, 201, 202, 203, 204, 205, 206, 207, 208, 209,
  210, 211, 212, 213, 214, 215, 216, 217, 218, 219, 220, 221, 222, 223, 224, 225, 226, 227, 228, 229, 230, 231, 232, 233, 234, 235, 236, 237, 238,
  239, 240, 241, 242, 243, 244, 245, 246, 247, 248, 249, 250, 251, 252, 253, 254, 255, 256} to member 2
  2009-11-05 11:10:40.678/99.102 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): TcpRing: disconnected from member 2 due to a kill r
  equest
  2009-11-05 11:10:40.678/99.102 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): Member 2 left service Management with senior member
   1
  2009-11-05 11:10:40.678/99.102 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): Member 2 left service JpaDistributedCache with seni
  or member 1
  2009-11-05 11:10:40.708/99.132 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): Member(Id=2, Timestamp=2009-11-05 11:10:40.708, Add
  ress=192.168.8.80:8089, MachineId=24656, Location=process:1684, Role=OracleRunEmployeeExample) left Cluster with senior member 1
  2009-11-05 11:10:40.879/99.303 Oracle Coherence GE 3.5.2/463 <Info> (thread=DistributedCache:JpaDistributedCache, member=1): Restored from backup
   128 partitions
  2009-11-05 11:10:40.879/99.303 Oracle Coherence GE 3.5.2/463 <D4> (thread=DistributedCache:JpaDistributedCache, member=1): 0, 1, 2, 3, 4, 5, 6, 7
  , 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 4
  4, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80
  , 81, 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, 100, 101, 102, 103, 104, 105, 106, 107, 108, 109, 110, 111, 112, 11
  3, 114, 115, 116, 117, 118, 119, 120, 121, 122, 123, 124, 125, 126, 127,
  2009-11-05 11:28:39.800/1178.224 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): Member(Id=2, Timestamp=2009-11-05 11:28:39.635, A
  ddress=192.168.8.80:8089, MachineId=24656, Location=site:metsys.metex.com,machine:mw12,process:1752, Role=CoherenceConsole) joined Cluster with s
  enior member 1
  2009-11-05 11:28:40.231/1178.655 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): Member 2 joined Service Management with senior me
  mber 1
  2009-11-05 11:28:41.633/1180.057 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): TcpRing: connecting to member 2 using TcpSocket{S
  tate=STATE_OPEN, Socket=Socket[addr=/192.168.8.80,port=8089,localport=4143]}
  2009-11-05 11:30:01.658/1260.082 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): Member 2 joined Service DistributedCache with sen
  ior member 2

  But I can't check whether the persistence unit is still persistent.
  
  Published by: jetq on November 5, 2009 11:49

  Re:

      Does the above result shows that the persistence work is finished successfully?
     
  

  Yes, it's nice. What is persistence. These are the characteristics of persistence.

  Junez