Vista won't let me change my user password

Similar Questions

• I sent a song to someone in a different country and it won't let me change the recipient, even if she has not been redeemed yet.

  I sent a song to one of my friends who live in Canada, while I'm in the United States and I didn't know that it wasn't going to work. She was not able to buy since she lives outside the United States, but it won't let me change the recipient. Is it possible that I can change the recipient or even recover my $1.29? Thank you.

  That's what you have tried to send it back: return gifts iTunes - Apple Support ?

  If this does not work you can try to contact iTunes Support and see if they will refund you: http://reportaproblem.apple.com or https://www.apple.com/emea/support/itunes/contact.html

• iTunes will not take my Danish credit card and does not leave my country to change since I live in Spain. So I can't enter my Spanish credit card because it won't let me change the country before giving another card... I don't know what to do?

  I recently moved to Spain, but I'm not allowed to type in my Spanish credit card because it won't let me change the country. It keeps telling me that I have to put in a card that works. But as soon as I put in my Danish credit card, it will not accept it? I have to money to iTunes, then, what is the problem?

  What happens when you try to change your country on your account, you follow these instructions: change your iTunes Store country or region - Apple Support ? While in Spain, you can only use the Spanish store, and you can use a card issued by a Spanish bank (and who is registered in the same name and address you put on your account)

• 'My card' when contact is not me, and it won't let me change it or delete the info. for the person mentioned (which is having the same first name as I do). Any ideas?

  'My card' when contact is not me, and it won't let me change it or delete the info. for the person mentioned (which is having the same first name as I do). Any ideas?

  iPhone OS 9.2 6.

  I already tried to delete information about the person identified as "my card". Because the phone think it is 'my card' delete the contact and/or modify the information. does not work.

  Create a new contact with your correct information, who like 'My card' to:

  Settings > Mail, Contacts, calendars > Contacts > my info

• I can't get my HP Officejet 4300 series printer to print. When I right click, it says 'offline', but it won't let me change it to "in line". "." Any suggestions? Thanks /.

  I can't get my HP Officejet 4300 printer to print.  When I right click, it says 'offline', but it won't let me change to "online".
  Any suggestions?  I feel I have tried everything. What happened in the past, however, if I "right click", I could change to "online".
  but now it won't.  What can I do else?

  Hello

  1. have there been recent changes to the computer before the show?

  Method 1: I suggest to follow the steps provided and check if it helps.

   http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02221706&cc=us&LC=en&DLC=en#N71

  Method 2: You can also try running the fix it from the link below.

  http://support.Microsoft.com/kb/2027593

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

  Hope this information is useful.

• Vista Welcome screen won't let me finish typing my password

  I have a hp laptop that has suddenly lost its wireless connection.  After that restarting windows vista doesn't let me finish typing my password on the Welcome screen.  What should I do?

  Thanks for responding.  On the Welcome screen, the only places to click had to shut down or restart.  I had to use a different computer at the entrance to my question here.  There is no start button, so I could do nothing at all.  I have not forgotten my password.  He simply stopped accepting my characters.  I finally just reinstalled the Vista operating system and took two days to get to all the updates that are installed and reinstall my software.  I'm not finished.  I think that the Wi - Fi connection problem has to do with the new Net Gear router that I bought.    I found that if I restart my computer, then the wireless setting is by saying that I am connected.  But if I go away and let the computer run for example overnight or a few hours and then when I come back I have to restart the computer to get the connection.  The recent change is the new Net Gear router I had when I changed border (had many failures that I couldn't tolerate) to Comcast (which has a Net Gear router that keeps cutting out).  I never know if it has something to do with the computer manufacturer, HP, Microsoft Windows, Internet, Comcast service provider or router, Net gear.  New technology is not for everyone.

  Thanks for trying to help me.

• change a user password through a database link

  Hello
  
  I need to change a user password in plsql for a remote database.
  I have a db link Setup, but cannot see how to run the command Alter user so it willl run in the remote database.
  
  I was hoping to do USER@dblink1 ALTER user IDENTIFIED BY newpasssword, but Oracle doesn't like the @dblink in the alter command.
  
  Does anyone know a way around this?
  
  Thank you

  You can try something like

  declare
   job binary_integer;
  begin
   dbms_job.submit@dblink1(job,'begin execute immediate ''alter user xy identified by ..... ''; end;');
  end;
  

• Windows Vista won't let me enter a password

  Hello

  My mother has Windows Vista, and today when she went to turn on the computer, to the Vista Welcome screen, when it prompted for a password, it would not let him anything.  If she goes into repair mode when starting, it let him then and he will accept.  She has not changed recently, or someone else.  She tried to start safe mode and also checked the keyboard keys stuck and dirt.  She is old, does not know the product # and is not a disc of recovery of any kind.  For some reason any Vista simply won't let no its nothing State in the password box.

  Can we do anything?

  While she did a restore of the system scanned for malware and nothing works.

  If she can't do those steps, or they do not solve the problem, it will have to reinstall the operating system.

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  And this is the Information from Microsoft on the problems of passwords;

  You will need to borrow a Microsoft DVD from a friend, Recovery DVD a manufacturer without these special work options available.

  • http://support.Microsoft.com/kb/940765

  If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.

  You may be unable to connect to Windows Vista or Windows 7 in the following scenarios:

  • Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
  • Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
  • Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
  • Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.

  "What to do if you forget your Windows password"

  http://Windows.Microsoft.com/is-is/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

  "If you forget the administrator password, and you do not have a password reset disk or another administrator account, you will not be able to reset the password. If there is no other user account on the computer, you will not be able to log on Windows and you need to reinstall Windows. »

  See you soon.

• Vista won't let me not rename files or file names

  When place... again... folder, I try and rename it and it does that go back to the new name of folder(2-XX). I made myself admin so that I can change. It still won't let me. Anyone know how to get it to be able to rename the file?

  Hi comp_user_800esm

   

  Method 1:
  You can perform a scan of the SFC (System File Checker). It lists all the issues and will also retrieve all files if necessary. Follow the steps below to p Ed a SFC Scan -.

  a. click Start, click programs, on Accessoriesprincipally made, right click guestand then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click Allow
  b. type the following command and press ENTER:
  sfc/scannow
  A message appears indicating that "the system scan will start. Be patient because the scan can take some time.
  c. If all files require a SFC replace will replace them. You may be asked to insert your Win7 DVD for this process to continue.
  d. If everything is correct you should, after the scan, see the following message "resource protection Windows not found any breach of integrity".
  e. once the scan is finished, close the command prompt window, restart the computer and check.

  Check the link below for further guidance on scan SFC - mentioned
  http://support.Microsoft.com/kb/929833

  Method 2:

  You can perform a clean boot and check. To perform the clean boot follow step 1 mentioned in the article below, and then try again check in the clean boot state -

  http://support.Microsoft.com/kb/929135

  If the problem is resolved check which service non-Microsoft is the source of the problem; referring to article and following the other steps.

   When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  a. Click Start, type msconfig.exe in the start search box and press ENTER.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  b. on the general tab, click the Normal startup option and then click OK.

  c. When you are prompted to restart the computer, click on restart.

  Method 3:

  If the problem persists, you can check if you are facing the same question in the user account new or different administrator account.  You can create a new user account on your computer, and then check.

  Create a new user account-
  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  If you are not faced with the same question in a new user account, you can view the link below and use the steps provided to fix a corrupted - user profile
  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

   

  I hope this helps.

• won't let me change my password/ideas: insert an error code or give a brief description of what you're trying to accomplish or difficult. __

  Don't let me change my password.  Says I have 0 characters and 0 days to change it. Many people receive emails via my email address wrong and I'm not sending them. I need to know how I can change my password.

  Hello

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to hotmail and would be better suited to the Windows Live community. Please visit the link below to find a community that will provide the support you want.
  http://windowslivehelp.com/

  Best regards

  Matthew_Ha

• Information required when changing the user password special appl

  Hello
  
  We have a requirement where we need to change the password for the following users.
  
  IBEGUEST
  IBE_ADMIN
  IRC_EMP_GUEST
  IRC_EXT_GUEST
  OP_CUST_CARE_ADMIN
  OP_SYSADMIN
  ASSISTANT
  
  Let me know whether autoconfig/application closing or not while we change the password?
  
  Version:-EBS 11.5.10.2, DB 11.2.0.2
  
  I think that neither autoconfig, nor do I need to stop all the services to change the above user passwords. But please confirm!

  Vicky1 wrote:
  Hello

  We have a requirement where we need to change the password for the following users.

  IBEGUEST
  IBE_ADMIN
  IRC_EMP_GUEST
  IRC_EXT_GUEST
  OP_CUST_CARE_ADMIN
  OP_SYSADMIN
  ASSISTANT

  Let me know whether autoconfig/application closing or not while we change the password?

  Version:-EBS 11.5.10.2, DB 11.2.0.2

  I think that neither autoconfig, nor do I need to stop all the services to change the above user passwords. But please confirm!

  It is not necessary. Please note that changing the password for all users of the application (except the GUEST user) does not require running AutoConfig or bouncing the application services.

  What is the Impact of a seeded Oracle users disabling? [418767.1 ID]
  Is it safe to Date Some Applications end users as a GUEST? [783428.1 ID]
  Configuration Guide for Oracle E-Business Suite 11i [ID 189367.1]

  Thank you
  Hussein

• Satellite Pro C660-29W: BIOS won't let me enter the supervisor password

  Computer is a satellite pro C660-29W-PSC1ME-00U00KEN

  I put a BIOS supervisor password (no user password is set). I know the password.

  If I hit F2 it penetrates into the text editor, but does not any possibility to enter the password, and while I can see there is no way to change anything.

  Any suggestions?

  If this can be useful?
  http://APS2.toshiba-tro.de/KB0/TSB0B032D0000R01.htm

• Airport Extreme doesn't let me change the wifi password

  While in the airport utility, I try to change my wifi password and I get "error when updating the configuration."

  There is also no list of what devices are connected to the wifi.

  And it lists the serial number...

  All these things were there yesterday, no downloads or updates between yesterday and today.  Full cycle restarts were made.

  The Setup is Cox as ISP, my modem (Arris Surfboard SB6183), AirPort Extreme 5th gen.

  MBP mid 2015, 10.10.5

  It seems that Cox is currently implementing a number of changes to their service having to do with IPv6 at the present time.  Cox users who have Apple routers have problems as a result of this, and... if we are using the correct information... Cox is telling users that airports are not compatible with the changes that have been made.  Here is an example of message that we saw today:

  Change default delegated prefix IPv6 in Airport Extreme with the Configuration automatic IPv6

  Cox suggests to reboot the router when a problem arises... that helps for some users, but not all.

  or

  Disable IPv6 on the router from the airport... What is not possible. Even if it were, Apple uses IPv6 settings to enable communication with other Apple devices on the network. You can disconnect IPv6 to the WAN port on the airport by changing parameters IPv6 link Local Only... that Cox makes no mention of.

  Now the possible Catch 22.  You must be able to enter the parameters of the AirPort Extreme to change the link Local only... and if you can not access the settings on the airport... things will be difficult.

  You are able to open AirPort Utility, click on the image of the AirPort Extreme and then click on change to display the settings... page with tabs for different areas... or... you get an error message until you can get the settings?

• Does not required HSS restart after changing AD user password?

  It's the ps3...

  Hello

  You change the AD Service user password? (User ID used to pull all users) If yes then restart them Services, if it is for any particular user or all user, simply select the refresh option now under

  Security tab in the section MSAD to refresh quickly or it will take 60 minutes by default to HSS for synchronization with the AD

  Hope this helps

  Kind regards

  Zohra.

• To change the user password problem

  Hello
  
  I'm with some problems when you try to change an oracle user password. After using the alter command, it gives the message "Change user", but when I try to connect with, it throws the error ORA-01017...
  The strange part is... it works fine on my XE 11 g!
  
  Anyone have an idea on this issue? :)
  
  Thank you.
  
  ================
  
  Oracle@Arc02:~ > sqlplus mybase/mypass@myinstance
  
  SQL * more: Release 10.2.0.4.0 - Production on Tue Jan 15 11:52:48 2013
  
  Copyright (c) 1982, 2007, Oracle. All rights reserved.
  
  
  Connected to:
  Oracle Database 10g Release 10.2.0.4.0 - Production 64-bit
  With the Real Application Clusters option
  
  SQL > alter user z48829 identified by Telemar $0n;
  
  Modified user.
  
  SQL > quit
  Disconnected from the database to Oracle 10 g Release 10.2.0.4.0 - Production 64-bit
  With the Real Application Clusters option
  Oracle@dtcdbarc02:~ > sqlplus z48829/Telemar$0n@myinstance
  
  SQL * more: Release 10.2.0.4.0 - Production on Tue Jan 15 11:53:14 2013
  
  Copyright (c) 1982, 2007, Oracle. All rights reserved.
  
  ERROR:
  ORA-01017: name of user and password invalid. connection refused
  
  
  Enter the user name:
  ERROR:
  ORA-01017: name of user and password invalid. connection refused

  Hello

  Use sqlplus z48829/'Telemar$0n'@myinstance

  [ora10g@pos-uat-2:/home/ora10g>]sqlplus ajay/Telemar$0n@EBPSUATN
  SQL*Plus: Release 10.2.0.3.0 - Production on Thu Feb 28 13:29:17 2013
  Copyright (c) 1982, 2006, Oracle.  All Rights Reserved.
  ERROR:
  ORA-01017: invalid username/password; logon denied
  Enter user-name: ^C
  [ora10g@pos-uat-2:/home/ora10g>]sqlplus ajay/'Telemar$0n'@EBPSUATN
  SQL*Plus: Release 10.2.0.3.0 - Production on Thu Feb 28 13:29:22 2013
  Copyright (c) 1982, 2006, Oracle.  All Rights Reserved.
  Connected to:
  Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
  With the Partitioning and Data Mining options
  13:29:22 SQL> exit
  Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
  

  Thank you
  Ajay more
  http://www.moreajays.com