Upgrade of Windows 8 on Portege Z930

Hallo!
Just got my Portege Z930 PT235E with Windows 7 Pro preinstelled and winds 8 DVD.
I tried to upgrade to Windows 8 but unsecessful. From startup I get a message that is not bootable dvd. Also tried to start the installer under Windows 7, but there is no setup.exe on the DVD...

What is the process to Win 8?

Hello

Visit the support page for Win8 on
http://EU.computers.Toshiba-Europe.com/innovation/generic/Windows8-message
Here you can find instructions how to make Win8 upgrade or clean installation on your Toshiba laptop Win8.

Tags: Toshiba

Similar Questions

  • Portege Z930 - upgrade Windows 7 to Windows 8 Pro

    I bought the upgrade to 7 to 8 during this promotional offer in early 2013, but so far I was expecting a better time perform the upgrade. I'm doing the upgrade having prepared a USB pen with the ISO, I downloaded in 2013.

    However, after 20 minutes of work, about 99% it is said that the upgrade has failed.

    I read somewhere that it is perhaps because of the recovery of my Portege partition.

    Someone have faced similar problems?
    Please consider that I am performing an upgrade instead of a clean install.

    Thank you

    da

    PS and probably OT: anyone know if it is possible to obtain ISO 8.1 with the 8 with an activation code?

    As I'm not mistaken the Portege Z930 was sold with a preinstalled Windows 7 but Windows 8 extra DVDs should be part of the package.

    You do not have this DVD in Windows 8 support?

    In any case, I found a useful page that provides different information you how to put the system to Windows 8.
    http://www.Toshiba.EU/innovation/Gen...dows8-message/

    Please click the link: step by step Instructions to upgrade to Windows 8

    I recommend you to run education step by step and repeat system upgrade process.

  • Upgrade Windows 8 Portege Z930 the CD comes with

    Hello

    I just got my new Toshiba Portege Z930 pre-installed with Windows 7, along with two discs Windows 8 Pro. It is a good pc, but with no cd player, how do I install Windows 8 on the disks?

    Sincerely

    Post edited by: Toshibanewbie

    > but with no cd player, how do I install Windows 8 on the disks?
    You can use an external USB CD/DVD drive to boot from disks to win 8.

    Or you try to install the 8 Win using a flash USB memory sik.
    But in order to install the memory flash USB one Win 8 Win 8 ISO (image) files is necessary.
    In addition, you will need to create a bootable USB. You can do this by using the Windows 7 USB/DVD download tool

    I recommend using google for more details

  • Portege Z930 - upgrading to Windows 8 without dvd player

    Hello

    Is it possible to upgrade to windows 8 without using an external dvd drive?

    Thanks to the image of the dvd or something?

    I tried to put the dvd files in a disk drive external hard usb, but it didn't work... is it possible to install it without the help of an external dvd drive?

    Thanks :)

    Yes, you can make a the Win8 ISO bootable USB Flash drive using a tool like WinUSB Maker.

  • Portege Z930: Loss of Fn keys after upgrade to win 8 - can't turn WiFi switch

    After several months waiting for my hour I just began my Portege Z930 - 11G for Windows 8 Pro upgrade.

    To a large extent, it went to the plan except that, after execution to display the Assistant Toshiba Upgrade I lost the Fn key and about half of the keys no longer seem to work at all.

    The only key I've ever used on a routine basis is the Fn + F8 option to activate the power switch WiFi.

    So now, I can not turn on WiFi on the computer.

    It must, surely, that there be a way to do it, but I'm not. Does anyone have a suggestion? I'm OK for now because I have a local cable system in the House, but once I get out on the road I will fight without WiFi.

    Before running the wizard upgrade of the Fn key grew up the key appear in the upper part of the screen and I want to surely I had turned on WiFi right here.

    The Fn key utility offers very little control of the Fn keys. It does not offer the possibility to do anything else than to disable five notifications screen for keyboard backlighting, power plan, touch pad and cursor overlay digital overlay.

    Any help gratefully received.

    Andrew

    > So now I can not turn on WiFi on the computer.
    First of all, you can enable and disable the WiFi using the function key, but you can also activate the WLan settings of Windows 8
    Key Win + C-> settings-> change PC settings-> wireless

    Now, you can use the cursor to wireless devices to enable or disable the WiFi network.

    But to get the FN button work you need to install the + Toshiba function key + Utility for win 8 and + Toshiba system driver + to win 8

  • Portege Z930 - Win8 Upgrade offer fails

    Hello!

    31.Oct.2012 we bought Portege Z930 - G1S (PT234R) - quite an expensive laptop with Win7 Home Premium OS.

    We have reduced by thinking, we are entitled to Win8 upgrade, but as we walked into our data on the Microsoft site - they told us we are not allowed.

    We have tried to achieve the support of Toshiba in Russia - http://ru.computers.toshiba-europe.com/innovation/contact_toshiba.jsp
    Several times a month.

    But all mails are back with the error "invalid recipient address.

    How is it possible that support Toshiba official site is an invalid address blacklisted?
    How is it possible that Toshiba laptop recent and rather expensive subject program of upgrade of Windows 8?

    Thank you.

    Hello

    Please check this page how to upgrade to Win 7 to 8 Win:
    http://EU.computers.Toshiba-Europe.com/innovation/generic/Windows8-upgrade-stepbystep

    The point is that you must order Windows 8 from Microsoft and install it.
    If it fails, contact Microsoft why the order to win 8 failed.

    Of my knowledge Toshiba provides a Win 8 drivers. You can get this driver TOSHIBA Upgrade Wizard, but you can do this after the installation of Win 8!

    I found this page Toshiba win 8 Win 8 upgrade information
    http://EU.computers.Toshiba-Europe.com/innovation/generic/Windows8-message

  • Portege M800 - Microphone does not work after upgrade to Windows 7

    Hello world

    I have a Portege PPM81E and am unable to get the microphone not working after having upgraded to Windows 7.

    I tried all the drivers I could find, but no luck.

    Is there anyone out there with the solution?

    Thanks in advance!

    Just a few questions:
    You have upgraded original Hat version of Vista you have with your laptop or you have installed the clean version of Win7?
    All hardware components are correctly installed and listed in Device Manager?
    How do you test feature mic?
    Microphone is in the sound properties > recording devices?
    MIC is set as default device?

  • Portege Z930 - Downgrade from Windows 8 for Windows 7

    Hi all

    I have serious problems with my new laptop Portege Z930-138. I wanted to downgrade from Win8 to Win7 and transferred my old iso of Win7 on a bootable USB.

    I changed the BIOSsetting CMS BIOS in order to boot from USB and it worked.
    But later, I deleted all partitions on my HARD drive in order to have a primary partition where to install my old Win7.

    However I can't do!

    Now I have 1 GB 119.1 unallocated space and there is no way to create a new partition from it.
    Also when I try to install Win7 it says the disc's style GPT.

    I also tried to convert it from the command prompt, but it does not work.

    You guys have any ideas what to do?

    Hello

    Recommend the reading of this Toshiba HowTo:

    Steps to install Windows 7 on a Windows 8 device *.
    http://APS2.toshiba-tro.de/KB0/TSB2B03EX0002R01.htm

    If you follow the steps described in this document, you should be able to install Win 7

  • Problem domain Portege Z930-13 x - error Windows 8 - network

    Hello

    I am owner of a Portege Z930-13 x with windows 8 is installed.
    My work is connected to a domain network and work very well until today.

    When I started the PC and I put my password it says: "the security on the server database has not a computer account for this trust relationship.

    On windows 7 and XP I could easily enter the admin user and correct this problem by re-connected to the domain of may server.

    In this case, I can't enter the administrator or user mode because it gives me the error of the soul.
    I can't restart the computer with a cd/dvd-rom or a usb pen with hirens boot or other kinfd of the software that I use.

    How can I fix?

    Thank you

    In my opinion that's not Toshiba related question and the answer should be offered by Microsoft.
    Perhaps someone can offer a solution. Until then check it please if someone can help on http://social.technet.microsoft.com/Forums/en-US/category/windowsserver

    I hope someone can help. If you will be able to find solution to be nice and post small report on this issue.

  • Upgrade of RAM for Portege Z930 recommended

    Hi all
    I would like to know what is recommended by Toshiba memory to upgrade the RAM to the maximum amount.
    I am owner of a Portege Z930 16 M part number PT234E-08P05SIT.

    If I undestood weel, it takes 4 GB of DDR3 memory to get the maximum of 6 GB (2 to edge + 4), right?

    What manufacturer recommends Toshiba?

    Thank you
    Enrico

    Compatible 4 GB of RAM has PA5037U-1M4G part number.
    Check it out.

  • Portege Z930 Windows 8.1 Overview - 3G no longer works

    Hello

    After you have installed the Preview of Windos 8.1, the 3G Modem is no longer in effect.
    Anyone have the same problem and know a solution?

    I did update the Firmeware (long before 8.1)
    I tried to download the latest version of the driver, but does not work!

    It will be found, but is not operational.

    Portege Z930-PT234E
    8.1 Windows 64-bit

    Kind regards
    Armin

    Hi Armin

    The RTM of Windows 8.1 version is in the month of August, so I think that Toshiba can offer some new drivers will fix all the problems. Until the official launch, I don t think that you will find whatever on Toshiba support and download page. I fear he must wait a little in the hope that Toshiba will offer necessary updates of m.

    Let's see if someone has more information on this subject.

  • Portege Z930 - new Windows 7 and installing the driver

    I have a Toshiba Portege Z930 Ultrabook.

    I don't use it for a while because he was very very slow when navigating or attempt to perform other tasks. I scanned the system with several antivirus (now I have Avast and Fixila, but I also used Kaspersky and Norton) and nothing came.

    Now, I decided to reinstall Windows.
    So, I received a kit of Windows 7 Pro (it's the license granted with the laptop) and I'm fighting for a week to make it work properly.

    Now seems as graphics card does not work, I have most of the hard disk full some old files of windows, etc, etc.

    1. How is the right way to install a new version of windows on this laptop (without the old installation files) and use the accessories available on the laptop (graphics card, fingerprints... tool)

    And YES, I tried all THE drivers available on the Toshiba support successfully section only for the wireless card.

    2. have you had problems with the speed?

    Thank you
    Victor

    Hello

    > Now looks like graphics card does not.

    Does that mean exactly? Graphics card is recognized correctly in the Device Manager?
    In case it is, the driver is installed and works of the GPU.

    What Portege Z930-xxx are you?
    The exact part number might be useful to check the specs of the laptop.

    By the way: the driver / software installation is not very difficult.
    Forget the other Toshiba software if you n t want to install it
    Pick up the pilots only...

    However, some parts of the software as a value-added Package must be installed because this package installs a range of important public services.

  • Portege 7220 upgrading to Windows XP

    What is the best way to upgrade to Windows XP? (now 98se)
    Y at - it might be those who have already upgraded, or is there a manual for this?

    THX in advance

    Gerard (Netherlands)

    Hello

    In my opinion, you can start WXP CD von Microsoft under 98SE and there are hardware compatibility Check option. After use check my system automatically. I'm sure that almost all of the drivers are by WXP. It is possible that the infrared function and a docking station may have some problems. Portege 7220 with operating system Windows XP Home edition is not supported by Toshiba.

    Good bye

  • Portege Z930 - 14 X - need key for the new installation of Windows 7

    Hello

    our company bought a Toshiba Portege Z930 - 14 X, and it is necessary to do a clean install of Windows 7.

    Unfortunately there is no key working Windows 7 can be found anywhere on the unit.
    I read the installation key, but the key is not supposed to be activated, so does not work for a clean install.

    There is usually a sticker of license at the bottom of the device, but this laptop has nothing.

    So, where can I find this Windows 7 key?

    Kind regards
    GSUs

    > Unfortunately there is no key working Windows 7 can be found anywhere on the unit.

    If you want to use a clean Windows system, you must purchase the MS Windows disk containing the serial key.
    Toshiba laptops are preinstalled with Toshiba image containing the OEM version of the Windows system and drivers. This image is already enabled. The series key isn t necessary.

  • Portege M750 - how to upgrade to Windows 7 without preinsatlled Vista?

    I have a laptop Portege M750 who had professional Vista on this subject.
    I removed vista and installed the RC of windows 7

    Now I have received the final windows 7 vista upgrade but can not install via Win7rc or independent to have vista first.
    I don't have a cd of vista for the laptop as it came only with the CD of windows xp for some reason any.

    The recovery partition has been deleted when installing win7 rc
    I'm downloading a torrent of vista that should work, but is a few hours

    I was wondering if there is another option for the upgrade of windows 7 to install

    Hello

    You cannot switch to Win 7 without Vista operating system preinstalled.
    In this case, you can do ONLY a clean installation of Windows 7.
    But for this, need you a Win 7 DVD and not an upgrade disk.

    I think that the laptop has been pre-installed with Vista and there is a possibility to create a Vista recovery disk.
    (but in addition you get a Win XP disk in order to have two operating systems).
    Looks like you do not have create this Toshiba Vista recovery disk using the Toshiba recovery disc creator (must be preinsatlled on the laptop), which means that you will not be able to reinstall Vista new

    I think that there is nothing to do but to buy a Windows 7 disc and do a clean install.

Maybe you are looking for

  • Bookmark tab font color

    Searched the web and forum to find out how to change the color of the font of my bookmark tabs. My current theme is invisible, but the legs with black text. It is difficult to read and should be of a different color and "BOLD".I've seen comments abou

  • Raspberry PI installed correctly on LabVIEW 2014 with LINX 3.0 (yellow warning)

    Hello everyone Well, I create this thread because I can't connect with my RPI with LabView2014, I'll put some different screenshots, as you can see I already install the LINX 3.0 on my computer. My computer sistem -10 64-bit Windows Products already

  • All-in-one HP Envy 5530: 5530 Evny HP all-in-one

    At the beginning when I changed my color HP got ink cartridge stuck on 'print alignment... page. "then after I reboot it printed the alignment page and is stuck on the"alignment ".  Now it is stuck on copy and shows just the turning circle.  I have t

  • Windows 2012 R2 Standard Cal

    Hi, I want to know how many licenses are included in 1 Windows Server 2012 R2 Standard license?

  • Ink has failed

    Today I bought a brand new 61 ink for my printer HP combo pack.  Everything in packing and packaging looked normal.  When I got home and opened the package, I noticed that package of sheets for the black ink has been open and cartridge had no protect