How to clean boot

Similar Questions

• How do I restart the computer after the clean boot

  Hi, I need to know how to reset my computer to start as usual after a clean boot troubleshooting, to reset the computer as usual, thank you very much.

  Hi Eric,.

  To help you with your concern on how to reset after you perform a clean boot, please specify below:

  • You try to turn on and off your computer?
  • What version of Windows are you using?

  Kind regards.

• How to download Guided Help for the clean boot

  I would like to learn more about how to perform a boot clean and when you go to:

  http://support.Microsoft.com/default.aspx?scid=kb%3ben-us%3B310353

  Here, there is a hyperlink to:

  Download Guided Help

  When I click on it using Firefox there is a download for 310353.exe which is a binary file of opening http://download.microsoft.com

  the file is then saved and it appears in the download

  clicking on it opens an executable file.  Are you sure that you want to run 310353.exe?

  Do you want to run this file?

  Yes and then choosing this computer produces Guided Help can not be downloaded right now, please try again later...

  After many attempts, it does not download.

  When I click on it using IE it opens a file download 310353.exe application 134KB

  He then opened editor packages GSA ACW Micrsosot Corporation

  When executed, it opens

  Guided Help

  You want to run Guided Help on this computer or on another computer?

  Choose this computer and clicking next product

  Guided Help can be downloaded right now

  Please try again later or visit the help and support web site for more information.

  I went to this menu during about a week and it never download Guided Help.

  How to solve this failure to download so that I can learn about the clean boot and received interactive help?

  The information (not the ms response) that I had on http://support.microsoft.com/default.aspx?scid=kb%3Ben-us%3B310353

  is there any information to download.  The link still works, but the information for the download/installation has been removed.  And a return at a later date to check will therefore end in place with guided help can be downloaded right now.  It only works if the information has been restored.

• How can I perform a clean boot in Windows XP?

  I have a program (ATGinaHook.dll) that I can 't find to uninstall; It aims to prevent the upcoming welcome at startup screen and it is new and I don't put it here (knowingly). I asked and got an answer that by starting the system in a State of clean boot, it might be useful.

  Do not click on answer if your question is not answered. I remember that a long time ago, I installed a driver for a wireless adapter. It looks almost like a flash drive, but it allows you to connect to a wireless connection on desktop computers that have no wireless devices. When I installed using configuration, it disabled my home screen. The computer should start up and go to a classic windows screen asking me to login with my password which was totally empty, because I have not set a password. I thought that maybe you used an identical to landmines wireless adapter in the past. If that were the case then I would have been able to solve your problem. I think it might be something you might have installed. He is not very smart to simply get the .dll file and remove it because the .dll files are generally large system. So basically deleting it could probably make the situation even worse than it is already. By chance, there is a lenovo with a fingerprint reader to your computer? All the posts I've seen on the talks from the internet to a kind of fingerprint reader. Look at these forums, I do not know if they will help you.

  How to get XP Welcome screen ?
  How to restore the XP Welcome screen?
  What is ATGinaHook.dll ...?
  How to restore the XP Welcome screen
  Windows Welcome screen replaced by finger print...

• How to do a clean boot

  Trying to follow these steps to install the download 1.11 frame that I got erroe code 80073AA2 and I don't know how to do a clean boot. If anyone can help.

  Step 1:
  Download the stand-alone package of the update from the Microsoft Download center, put the computer in a State of startup boot, then try to install.
  Put the update number in the link below to find:
  http://www.Microsoft.com/downloads/en/default.aspx

  Step 2:
  Put the computer in a clean boot state, then check the issue.
  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to solve a problem by performing a clean boot in Windows Vista or in Windows 7?
  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Trying to follow these steps to install the download 1.11 frame that I got erroe code 80073AA2 and I don't know how to do a clean boot. If anyone can help.

  Step 1:
  Download the stand-alone package of the update from the Microsoft Download center, put the computer in a State of startup boot, then try to install.
  Put the update number in the link below to find:
  http://www.Microsoft.com/downloads/en/default.aspx

  Step 2:
  Put the computer in a clean boot state, then check the issue.
  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to solve a problem by performing a clean boot in Windows Vista or in Windows 7?
  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Maybe you should read what you posted...

  In step 2, the writer has already noted article for instructions on how to clean the boot in Vista.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to solve a problem by performing a clean boot in Windows Vista or in Windows 7?
  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  In the case of a doubt watch the video in the article above.

• Windows Exployer will not respond in 'Normal Mode', in 'Safe Mode' or in 'clean boot '. "Fix it" even does not work. How can I fix this problem?

  Windows Explorer does not work in 'normal', in "Safe Mode" Mode or in "clean boot".  Same 'Fix it' does not.  How can I fix this problem?  I have Win 7, 64 bit.  Thank you.

  Hello

  1. do you receive any error messages?
  2 has there been any changes made on the computer before the show?

  Method 1:
  If this solves the problem, you can run check and the (SFC) System File Checker tool. SFC scan would be a system file corrupt on the computer search and replace.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Method 2:
  If the problem persists, you can create a new user account and check if the problem still persists.

  Create a user account
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  If the problem is resolved in the new user account, you may have corrupted profile.

  Here is the link for troubleshooting a corrupted profile, you can follow the steps mentioned in the link.

  Difficulty of a corrupted user profile
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Method 3:

  If the problem persists you can scan your computer anti-virus using the Microsoft Safety Scanner.

  Microsoft safety scanner will help us to get rid of software viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Warning: If you run the antivirus program that is infected by the virus scan will get deleted. Therefore, reinstall the program. Also, if files and folders are affected by the virus, while they might even get deleted.
   
  I hope this information helps!

• How to set up a clean boot in order to update

  I want to update Internet Explorer from IE6 to IE8 and there are a few other updates I want.  All the required updates were made automatically.

  Troubleshooting of IE8 suggests a clean boot. I got an error message of my logon 'power', so I logged in 'administrator '. I followed the article 310353. http://support.Microsoft.com/kb/310353

  In the service tab of msconfig, the article says "Click to select the hide all Microsoft Services check box." and "click disable all, then OK." Like I said that I am logged on as administrator. I get the message "You may need to log on using an administrator account to make the specified changes."

  I am looking for a way to install IE8.  I clicked back to the settings default to IE6 and rebooted.  I hope to do the update within a clean boot will operate.

  Yes, right or it could just be a matter of system settings.

  I had my Matshita drive to a DVD ram drive.  ImgBurn can now read that an iso and Windows Media Player can read my choice of a collection of avi.

  The problem of google + has proved to be no more than AdBlock blocked the text don't box that opens to let a message on his screen.

  Logged in as 'Administrator', I'm not allowed to make necessary adjustments in msconfig to boot and I am not allowed to change group policy to create Microsoft Active Setup.

  The most obvious problem is a protected folder stored in Shared Documents, which is invisible. Show encrypted or compressed NTFS in color is enabled in folder options, so I should be able to see the file, right?

• How to perform a clean boot on Dell Inspiron 531 32 bit

  Impossible to get into Windows, menu missing also start

  Hello

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  reinstall using dell dvd

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

  using the dell recovery partition

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

• After doing a "clean boot" and then begins a reset, how do I activate the starting aps in the Configuration of the system when the "Activate" button is low?

  I just ran a "clean boot" on Windows 8.  Now, I'm trying to reset my computer but when I enter msconfig - System Configuration - Services - the "Hide all Microsoft Services" checkbox is more verified and the "Disabled" button is available, the button "Activate" is low.  According to the instructions on support.microsoft.com/kb/929135 should show the opposite, and I have to uncheck 'Hide' and 'Activate' all access points.  What can I do to activate the aps and finish reset correctly.

  Hello

  Are you trying to reset the computer to start normally after a boot minimum troubleshooting?

  If Yes, then I would like to inform you that once you select Normal startup under Startup selection all services and startup items will be automatically activated. You just need to restart the computer to start the computer normally.

  Please answer us on the State of the question to help you further.

• How to clean install Windows 7 on Windows 10

  My old laptop packed recently so I had to buy a new one and it came with Windows preinstalled 10.  I'm not a fan of this os, so I want to get rid of 10 windows and install Windows 7.  With work, I found a new drive to install windows 7 to a computer store and now I want to change but I don't want to mess up so I thought I could post it here and see if there's something I should do first, or be aware of.  I have already moved all the files I want to keep it out of the computer to an external hard drive.  The unit is an Asus x552wa.

  I've never done anything like this before so the tips (or step-by-step procedure) would be greatly appreciated!

  Andrew

  Follow these same steps to do a clean reinstall Windows 7 which was used by 2 million consumers without a single complaint.

  Remember to follow the steps on the drivers that are important, they are printed in red.  Windows is quickly updated via Windows Update and driver-complete in Setup.  One or two still missing after installation are easy on the PC or a specific Web downloads of the device Support page.  No modern device would not have pilots who work for Windows 7, which is the operating system that is more prevalent in the world today.

  At any time you can reuse your Windows 10 license and get a facility much better that the bloated factory install make a clean install Windows 10   No one had any complaints from thousands of people who have so far one.

  If you want to give another chance to the installation, you have now, try optimizations available in the Wiki - in particular establishing a clean boot to turn off the bloatware factory starting with Windows that strangles the BONES and is never necessary to all.  Also uninstall all antivirus inflated by default for integrated defender who offers better performance.  If you try these and other steps you decide you like Windows 10 better just like I did even if I was (literally) it is more supporter who helped tens of thousands of consumers seven Forums before install Windows 10 and find faster and more modern even while retaining what I liked the most in Windows 7.

  Do not hesitate to ask questions in return and let us know how it goes.

• How to clean my disk overloaded space in C drive? Almost complete. Says "low disk space". Thank you in advance.

  How to clean my disk overloaded space in C drive?  Almost complete.  Says "low disk space".  Thank you in advance.

  I'd be interested to see a report of Disk Defragmenter. Open Disk Defragmenter and click analysis. Select view report, and then click Save as and save. Now find VolumeC.txt in your My Documents folder. Open the file, and place the cursor anywhere in the file, select Edition, select all to select all the text and copy and paste into the body of your message. To do this, before you run Disk Defragmenter because it is more informative.

  Follow a few basic maintenance note.

  1.5 the tool provided in Windows to remove unwanted temporary files is disk cleanup. To access this tool select Start, all programs, accessories, System Tools, cleaning disk to emptying your trash, delete temporary Internet files and other selected options. I recommend also you click Other Options, System Restore and delete all but the last system restore point. You must then run Disk Defragmenter.

  1.6 using the system restore option is most appropriate when your system is slow and you need to increase the free disk space on your C partition. If you have errors that could be solved by using the system restore to your system settings back to before that the error occurred initially, do not use this option.

  1.7. If more than one person uses the computer and they have their own user log you need to run Disk Cleanup in each user profile that you want to delete all the unwanted files.

  1.8. a better alternative program to disk cleanup is cCleaner. The freeware version works well for a home user and must be downloaded from Piriform program provider:
  http://www.CCleaner.com/download

  1.9. When you open cCleaner you will see four large icons to the left of the window. Here's cleaner them, registry, tools, and Options. For routine maintenance, you normally acceding Cleaner (this is not the mentioned registry cleaner later). When using for the first time only, you can accept the default settings.

  1.10. some observations on the parameters. On my computer, I do not have the boxes before the passwords saved selected. In a less secure environment, you could check this option and set cCleaner to run automatically when the computer starts. You also cannot check the boxes in front of shortcuts from the Start Menu, desktop shortcuts and historical form. You must check the boxes according to your needs. Bad first time options causes irritating no disasters.

  1.11. the second icon that you see when you open cCleaner's registry. A reserve many experienced users have about cCleaner, it's that it comes with a registry cleaner. This tool should not be used. By using a registry cleaner, but it is the case, provides significant benefits and there is always the risk of creating insoluble system errors, which cannot be resolved by reinstalling the operating system and all that that implies. You will avoid any possible problem of not not by clicking on the Save icon.

  1.12 the third icon that you see when you open cCleaner is tools. If you click this icon, it gives you access a routine plus service options. The first two tools are uninstalled and commissioning. I do not use these tools, preferring to use other software options. The third tool is the restoration of the system, which is covered in the next paragraph. The fourth tool is Wiper Drive and you will find reviews about this tool later

  1.13 removing the system restore points can be important if you have little free disk space. The ability to delete them is one of the tools options. You can selectively remove those created in less important moments. This makes it easier to hold the restore points for long periods without keeping large unwanted files, whose inflexible approach to disk cleanup fails to offer.

  1.14. you can't remove the last restore point using the cleaning disc or cCleaner. If the last restore point contains malicious software, you can turn off and then turn on system restore. This has the disadvantage that restore all points are removed when you want to keep more restore points that are not infected. How to get round this problem is to create a new restore point when you are satisfied with your computer is free of malware and then remove the infected restore point.

  1.15. in normal circumstances, you probably rarely need to use Driver wiper. However, there are situations like if you gave the computer to someone else, then the tool may be useful. Please note that the wiper Drive, opening, generates a warning message, which should not be dismissed lightly. Using wiper Drive for the wrong reason could have serious consequences.

  1.16 the fourth icon is labeled Options. Many configuration options are available here. You can configure cCleaner to run when start you but remember that this will slow down the boot. Another setting allows you to include or exclude cookies. Yet another allows files named to exclude.

• to start windows in clean boot and tried to launch interactive help - but says he can't

  system becomes all kinds of errors, the system disk error 7004 - 51b 9 - almost every day - don't wake up stand-by - extremely slow performance - advised to start in the State of clean boot and when I try to do with the interactive help - it says it can't run it - what can I do?

  You must get other advice.  I said nothing about "clean boot".  If you want to try a clean boot, see:
  "How to configure Windows XP to start in a"clean boot"State
    <>http://support.Microsoft.com/kb/310353 >
  If she does disk check every time you start and this was compounded, I doubt this will help.

  If it's sleep mode, then you wake up usually mode standby by pressing the power button momentarily.  If you want to wake you up by moving the mouse, you may be able to choose a screen saver that turns off your monitor but not your computer.  "Night light" is a semi stop and controlled by the power settings in the control panel.

  Good luck
  JW

• Can I transfer my old regsitry to a new installation of clean boot of windows 7

  Can I transfer my old register to a new installation of clean boot of windows 7?  If so, how this is done?  Without a transfer, it is necessary to reinstall all my software and it is very time consuming.

  You will not be able to transfer all the registry settings. Unfortunately, you will need to reinstall everything.

• How to clean the system

  original title: update

  I HAVE PROBLEMS ON MY COMPUTER... SOMEONE SUGGESTED THAT I TAKE GET ADJUSTED UPWARD.  IS THERE SUCH A THING AS A PC TUNE - UP TO?  IF SO, CAN I DO IT MYSELF OR SHOULD I TAKE IT TO A SPECIALIST?  SOMEONE CAN ME SAY STEPS SHOULD I TAKE?  I WAS TOLD THAT MY OPERATING SYSTEM DOES NOT RIGHT AND THAT IT IS ORIGINALLY MY MCAFEE NOT WORKING PROPERLY.  I'M LOOKING TO REMOVE ANY VIRUSES, TROJANS, MALWARE, ETC FROM MY COMPUTER AND GET MY COMPUTER RUNNING SMOOTHLY.  Thank you.

  Hello

  PC TUNER is 3rd party software and it is not recommended by Microsoft.

  WARNING: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  I suggest you to follow the methods and check.

  Method 1:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I suggest to download and install the Microsoft safety scanner and run the scan and check.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3:

  How to troubleshoot performance issues in Windows Vista

  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista

  http://support.Microsoft.com/kb/959062

  Difficulty of Windows system performance slow computer problems

  http://support.Microsoft.com/mats/slow_windows_performance/en-us

• I tried the clean boot and now the hard drive works simply and screen went black. The mouse still moves around the screen without any outher work keys? That is what it is?

  I tried the clean boot and now the hard drive works simply and screen went black. The mouse still moves around the screen without any outher work keys? That is what it is?

  Hello

  You will need to reverse the clean boot, as it is either incidental compared to
  the real cause of the problem. What, where you try to fix initially using the cleanboot?

  You can access Mode safe? Repeatedly press F8 as you start? If so you can try the configuration - control panel
  The Device Manager - graphics card - Double click on - driver tab - click the driver UPDATE - then
  Right click on the device and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure) is
  CTRL + ALT + DEL and the processes tab find EXPLORER.exe and COMPLETE the PROCESS on this subject - and then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
  by tapping F8 as you start several times.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you don't have the disks your
  system manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (making the system restore it)
  must be bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
  (if all goes well, the data records and need to reinstall programs). Don't forget to make a good backup or
  3.

  You can use another DVD that aren't copy protected but you you need to own
  Product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can do a repair installation that needs to save the data, but you will
  to reinstall the programs. This also requires correct Vista disks especially for OEM versions. You
  will need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (type in a single line or copy / paste a line at a time and then press enter - enter a bracket )
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)
  
  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.