How to clean my Satellite A300 1BL

I would like to clean my computer really good.
I search the Internet and someone uses a vacuum cleaner in the grid, but I'd like to know your opinion, I have to open inside safely to clean the ventilation system of the soul and all that things.

Can you help me please?
Thank you all.

Hello!

To clean my laptop, I use the jet of compressed air and could blow the dust from the cooling fans.
It s not necessary to disassemble anything.

If you have no experience, how to disassemble a laptop, you should not do this. It s a little more delicate and you need to remove a large number of screws and it s your risk and peril.

Good bye

Tags: Toshiba

Similar Questions

  • How can I put Satellite A300 - 29U back to factory settings?

    I don't know how to put my Toshiba Satellite A300 29U back to factory settings. I tried everything, but I have no idea how to do that? I have no CD or whatever.

    Thank you.

    If your laptop has the factory settings you can do it as described on http://aps2.toshiba-tro.de/kb0/HTD1303440001R02.htm

    Please note: this drive HARD recovery option works with the factory only settings.

  • How to restore a Satellite A300 PSAGOE?

    Sorry if this is in the wrong place or has responded, but one of my friends want me to restore its Satellite A300, the only info that she can give me is that it works on Vista and it's a 03uo1yen of psagoe.

    She has no records for this laptop. She bought a buffer memory so that I can make a backup of your laptop before you start anything on this subject.
    My question is, will she lose Vista and/or all pilots with a system restore? I was hoping to give it "out of the box", but that is not possible.

    I thank before any information, you can provide or advice you may have.
    Carla

    Hello Carla, and welcome to the forum of Toshiba

    At first, I must say that, out of the box, State can be done with the original recovery disk and if you don t have what may be a problem.
    If this phone works with Vista preinstalled original there may be able to do this, use the disk HARD recovery option.

    It works as described in this Toshiba document - http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm
    Please check this option.

    In the end, I must say that I was not able to identify this model of laptop and therefore give you more information please be so kind and post here exactly the model number (PAxxx-xxxxx) and the name of the model (A300-xxx).
    The two numbers that you will find at the bottom of the thumbnail of Toshiba.

    If you have any other questions let us know.

  • How to connect my Satellite A300-1J1 to HD TV

    Hello

    I have a laptop model Toshiba Satellite A300-1J1 (who doesn't have a HDMI) & just Toshiba XV551D 40 '' HD tv. You want to be able to connect the laptop to the tv with the best possible picture quality, a DVI to HDMI cable would be better than the monitor standard 15pin cable external monitor/TV?

    My laptop has an IEEE1394 Jack, I presume it's the same as a DVI plug? (I could be wrong tho!) Also read the manual of the TV, he said unless I connect HDMI to HDMI, I would need a separate audio cable?

    Looking to buy all the necessary cables rather than go shopping online so please advise as soon as possible, I want to make sure I get correct leads of the judgment.

    And my apologies if I seem thick lol.

    Thank you

    Hey Buddy

    First, please note that the VGA port provides the analog signal.

    It s is NOT possible to convert the analog signal into digital signal! You can convert a digital signal to analog but the analog to digital is not possible and will not work with HD TV.

  • How can I configure Satellite A300-148 boot from the recovery partition?

    Hello

    I had some problems when trying to install MAC - OSX, for her, where the partition table is deleted, then I retrieve the entire score as it is, but I can not start in any case.
    Then I decide temproraly install another copy of vista drive Vista (not the partition), then set up my laptop to boot from the recovery partition and reinstall the good copy.
    My problem is, it's all here, the only problem is, I need to configure the system to boot from the recovery partition.

    My device is:
    Satellite A300-148

    Thanks to the device.
    Ahmed.

    Hello

    If you have already changed the partitions of HARD drive and deleted files from the HARD disk, then your HARD drive recovery is too bad!

    But to make sure that the HARD drive recovery is not possible please press F8 immediately after the power of the laptop. Usually a start menu should appear and you should be able to choose the option called fix my computer. Then you should be able to choose recovery option.

    But like I said that this is only possible if your HARD drive was not formatted!

    If you have formatted the HARD drive and changed partitions then you will need a Toshiba DVD recovery that you have not because you didn t he create at the beginning. Is this good? Well, then you must order the recovery DVDs if you want to retrieve the laptop to factory settings.

    Welcome them

  • How to clean the Satellite L modules cooling?

    Hello

    my laptop is having a few problems "breathe."
    The fan is constantly strong even when I use it practically not more it turns off after about an hour when I really started to work seriously with modelling 3d or play challenging games...

    I was wondering if I could lose the warranty if I clean myself and if there is somewhere on this site or the statement of web on how to do it?

    Help please!

    Hello

    You will not lose warranty if you would not disassemble the laptop.
    You can clean the cooling fans with a jet of compressed air.
    This allows to remove dust from the fans.

    Also, here is a useful document of Toshiba I found here in the forum:
    http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=40

    Welcome them

  • Re: How to get '@' key - Satellite A300-1EC

    Hi all

    How to use '@' key on the keyboard?
    When I use shift + 2 key, @ is not displayed.

    Which are the keys to use to get @.

    Best regards

    Mathew

    Hello

    I think you the problem is related to a bad keyboard language setting.
    It seems that your keyboard type does not match the language setting in Control Panel-> regional & language Options control

    Maybe you use an English * UK * available instead of English * U.S. *.

    Try to change that and check if it helps.

  • Options recovery system and satellite A300-1J1

    Hello

    I was wondering if anyone knows how to recover the Satellite A300-1J1. My laptop has Windows Vista family premium, I'm not too sure about the number of 'bits' because the sticker at the bottom of my laptop is faded. My serial number is 8811896Q.

    I closed my laptop and when I tried to leave, he places the next morning it said 'unable to start Windows. A recent hardware or software change might be the cause. Then it goes to the screen that says ' System Recovery Options: could not start the installed program. " Click OK to turn off the computer.

    Does anyone know how to recover my laptop without having to waste (wipe) all data currently on it, such as the documents windows etc. ?
    Thank you

    > Does anyone know how to recover my laptop without having to waste (wipe) all data currently on it, such as the documents windows etc. ?
    In the past, we discussed very often on this theme. In any case, it works this way:
    -When you use recovery DVD for the installation of the OS all disk is deleted including data on all partitions
    -If you use HARD drive recovery option only C partition is deleted and all data saved on the second partition will always be there
    So please try installation of recovery of HARD drive following the instructions of the Toshiba document.

  • Satellite A300 - how to clean?

    Hi dear Toshiba owners;

    I would like to clean my laptop after 9 months of good use. Well,.

    I'm not talking about cleaning the keyboard or LCD, of course, I'm no fan talking inside. I've noticed recently that this laptop is producing heat wrong lately (especially on the left side of the touch pad - location of HARD drive I guess?). So, while I'm shopping, I found a pill that can spray some kind of liquid. I read the instructions on the label, it could be used almost anywhere to clean and remove dust (LCD, keyboard, DVD and many tips) seems fine.

    I've always heard those for cleaning of ventilation of the laptop and its fan, so it is wrong to use it, I bought? If not, what is my alternative and how to clean the fan and vents for better management of traffic and the air heat?

    BTW, where can I find the service manual for my Toshiba? (in an educational purpose and cleaning... Please)

    THX!

    Hello

    On cleaning the laptop, I recommend searching forum where you can find hundreds of threads I and this interesting article from Toshiba:
    [How to clean a Toshiba laptop cooling system? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=40]

    Service manuals cannot be downloaded. I think that they are only available for Toshiba and the FSA. You can download the manual that normally comes with the laptop.

    Welcome them

  • Satellite A300 - how to get Windows 7 recovery disk?

    Hello!

    I have Satellite A300 with windows vista restore disk and I want to upgrade to windows 7! How can I get a?
    How much it cost?

    You get Win7 to older models of laptops. Everything you can possibly do is to order Upgrade DVD but hey Win7 Toshiba DVD facilities can not be ordered.

    Of course, you can get Microsoft Win7 DVD facilities and clean OS install. Download page for all the drivers, tools and utilities that you can find on Toshiba.

  • Satellite A300 - how to start HARD drive recovery after own OS insatallation

    Hi guys.

    I have a question.
    I have a Toshiba Satellite A300, which came with Windows Vista.
    Normally I have the recovery with the normally pre-installed utility partition.
    After that I formatted the system partition, I installed a clean and fresh Windows 7 copy.

    My question is this.
    Since the recovery partition does not get soiled with, is there not a way to install the disk recovery utility hard back in recovery of Windows of F8 before the boot options?

    Please don't tell me that I need to have the recovery disk.
    I already did, I just want to find a solution because it is not that hard for someone who accidentally formatted the system partition and had not created the disks, but the recovery partition. My guess is to do some modifications in the files of the Windows recovery environment that are launched when you use the option to repair my computer at startup, because normally, HARD drive recovery utility appears as one of its tools-options.

    The problem is that I don't have to where these files are, maybe (C:\boot?)
    Currently, I am trying to see if a facility upgrade of windows 7 on windows vista will keep options for hard drive recovery then maybe I will find what it takes.

    All suggestions are welcome!
    Thank you for your time.

    OK, just a hint more, I found what is happening with the recovery environment, and which must be replaced to include more tools...
    This article was really helpful:
    http://www.techplat.com/2010/02/12/how-to-replace-default-Windows-7-recovery-environment-in-diagnostic-and-recovery-toolset/

    Also, I found a few guides microsoft on changing windows 7 recovery environment.
    http://TechNet.Microsoft.com/en-us/library/dd744576%28WS.10%29.aspx
    http://TechNet.Microsoft.com/en-us/library/dd744525%28WS.10%29.aspx

    So I continue and I think I'm close...

  • Satellite A300-17N - t - it have port series and how to get there?

    Hello

    To help my studies in microcontrollers, I need serial port, but I did not on the Panel of my laptop. I know that some laptop models have one on their motherboards, but is not on the Panel. If satellite A300-17N is one of them I enjoy any help and instructions how to get manually.

    Thanks in advance.

    Hello

    Satellite A300-17N doesn t have serial port and AFAIK no Satellite A300 was equipped with this port.

    But I saw a few online shops, they listed an Express card that offers the serial port (RS232). I found one on Amazon:
    http://www.Amazon.co.UK/STARTech-com-16C950-ExpressCard-serial-adapter/DP/B000PE6G04/ref=sr_1_8?ie=UTF8&QID=1300736594&SR=8-8

    I think it would be easier and less expensive way for serial port. :)

  • Satellite A300-Y00 - how to use a joystick for games?

    How can I connect my Satellite A300/y00 with joystick so I can play without a keyboard because its very difficult to use?

    What one should I get, like joystick ps2 or gamepad xbox since the microsoft xbox and im using microsoft software such vista...?
    But my laptop has what we call the game controller in the Control Panel, it means that I always install the software to use the joystick?

    Thanx

    It s your choice what joystick you want to buy. Go to a computer store and take a look at all the joysticks and buy one of them.

    Normally you need a driver for the joystick, but the joystick should be bundled with an installation disk that contains the drivers.

    Good luck!

  • Re: How to use the second hard drive in Satellite A300?

    I got a second hand Satellite A300 which was to be thrown out due to a defective DVD.
    I fixed the DVD and have a perfect system.

    On opening the box, I discovered that there 2 x 250 GB hard drives. I checked CMOS and show the 2 drives. However, Vista displays only the a drive.

    Excuse my ignorance, but how do I access to the second drive?

    I have Satellite A300 with two hard drives and each HARD drive has another operating system. Both hard drives are recognized correctly.
    I put t know what the problem is here, but the two hard disks should be recognized automatically.
    Try to set the BIOS to default settings and check again.
    Try to start the check and install Microsoft bootable disk if the two hard disks are displayed in Setup.

    I just hope that there is not a hardware problem.

  • How to unzip the driver for XP on Satellite A300 SATA?

    Hello.

    I want to downgrade my Satellite A300 from Vista to XP.
    For this I want to integrate the SATA XP driver in a new CD of Windows.

    My question: How can I decompress the *.exe file in the specific files that I need to install the driver?
    Or is it possible to integrate the *.exe file in the CD without unpacking?

    Hello

    Launch the .exe with the settings file a p

    For example (the files will be unpacked in the storagemanager folder):

    c:\downloads\iata_cd.exe - a c:\storagemanager Pei

    An accurate description, you will find in the Readme!
    Read it!

    Good luck

Maybe you are looking for