How to color or opacity when the code using the mouse?

Similar Questions

• How to make text disappear when the mouse is over a button?

  Hello, I'm completely new to Flash, and well I need help. I created a page that contains static text in the Center.

  Page has buttons on the side and when I rollover a button text is displayed, but the problem is that when I rollover a button, static text in the Center is here and I want to hide as I can't read anything either because the texts are overlapping.

  How can I make the text in the centre disappear / hide when I rollover a button and how do I make it reappear when the mouse is the off button?

  I hope what I said makes sense.

  You can assign the code onRollOver and onRollOut buttons to the dispappear of text, but you will need make the text a movieclip with instance name that you can use to target to make it invisible.  In the example below, the button has an instance name of "btn" and the movieclip of text has an instance name of "text_mc".

  btn.onRollOver = function() {}

  text_mc._visible = false;

  }

  btn.onRollOut = function() {}

  text_mc._visible = true;

  }

• How do I change position when the mouse is clicked?

  So, I'm doing a firearm are intended to the cross, so that it follows the mouse all the time. I want that it back down, then the mouse pointer goes up and the gun keeps track.

  I tried something like mouseY - 10; but with no luck, it did nothing. Thank you.

  You can't control the mouse of the users.  You can "hide" the users mouse and use a clip shaped cross to indicate where the mouse is and that movieclip, you can control.

• Re: How make a Word appear when the mouse click on an object I created.

  I am a beginner again, the software I have is fl Adobe CS4.  I succussfully has created a scene with all the correct layers including a start button action script.  No error does not work very well. Now, my next challenge is, how to cause a Word to apear?  I created a few items that I would like to select and cause a Word to appear and color to change, once I have fly over the object.  It's like the same method when you create a "Start button".  Can I create another sub scene in the action script command?

  You should not ignore the error (and also you can not). However, the code that you pasted contains no problematic piece of code that generates the error.

  To locate the error line, select allow debugging in publication settings.

• How to add multiple lines when the button is clicked

  How to add multiple lines when the click on button now is just add a row .plz give me idea how... waiting for answer

  / public final class screen extends MyScreen
  {
  /**
  * Creates a new object of MyScreen
  */
  ObjectChoiceField obj1 obj2, obj3, obj4.
  Table of String() = {'101 ', ' 102'};
  String of shadow [] = {"Shade1", "Shade2"};
  Rolls of string [] = {'101 ', ' 102'};
  String cutting [] = {"100-150", "150-200"};
  Chain of selectedindex1, selectedindex2, selectedindex3, selectedindex4;
  LabelField lbl1 lbl2, lbl3, lbl4;
      
  GFM LinedGridFieldManager;
  HFM HorizontalFieldManager, hfm1, hfm2 hfm3;
  VerticalFieldManager vfmMain;
      
  public MyScreen()
  {
      
  Set the displayed title of the screen
  hfm1 = new HorizontalFieldManager (HorizontalFieldManager.NO_VERTICAL_SCROLL |) HorizontalFieldManager.NO_VERTICAL_SCROLLBAR);
  hfm2 = new HorizontalFieldManager (HorizontalFieldManager.NO_VERTICAL_SCROLL |) HorizontalFieldManager.NO_VERTICAL_SCROLLBAR);
  hfm3 = new HorizontalFieldManager (HorizontalFieldManager.NO_VERTICAL_SCROLL |) HorizontalFieldManager.NO_VERTICAL_SCROLLBAR);
  HFM = new HorizontalFieldManager (HorizontalFieldManager.FIELD_RIGHT);
  vfmMain = new VerticalFieldManager (Manager.NO_VERTICAL_SCROLL |) Manager.NO_HORIZONTAL_SCROLLBAR);
          
  obj1 = new ObjectChoiceField ("", graph, 0, FIELD_LEFT);
  obj2 = new ObjectChoiceField ("", blind, 0, FIELD_LEFT);
  Obj3 = new ObjectChoiceField ("", rolls, 0, FIELD_LEFT);
  Obj4 = new ObjectChoiceField ("", cuts, 0, FIELD_LEFT);
          
  LBL1 = new LabelField("");
  LBL2 = new LabelField("");
  lbl3 = new LabelField("");
  lbl4 = new LabelField("");
          
  ButtonField btnAdd = new ButtonField ("ADD", FIELD_RIGHT);
          
  GFM = new LinedGridFieldManager (4, LinedGridFieldManager.VERTICAL_SCROLL);
          
  hfm1.setMargin (20, 0, 10, 0);
  hfm1. Add (new LabelField ("Chart"));
  hfm1. Add (obj1);
  hfm1. Add (new LabelField ("Shade"));
  hfm1. Add (obj2);
          
  hfm2. Add (new LabelField ("Rolls"));
  hfm2. Add (Obj3);
  hfm2. Add (new LabelField ("Cuts"));
  hfm2. Add (Obj4);
  HFM. Add (btnAdd);
          
  GFM. Add (new LabelField ("Chart"));
  GFM. Add (new LabelField ("Shade"));
  GFM. Add (new LabelField ("Rolls"));
  GFM. Add (new LabelField ("Cuts"));
          
  vfmMain.add (hfm1);
  vfmMain.add (hfm2);
  vfmMain.add (hfm3);
  vfmMain.add (hfm);
  vfmMain.add (new SeparatorField());
  vfmMain.add (gfm);
  Add (vfmMain);
          
  btnAdd.setChangeListener (new FieldChangeListener()
  {
  ' Public Sub fieldChanged (field field, int context) {}
  TODO self-generating method stub
  selectedindex1 = chart [obj1.getSelectedIndex ()];
  selectedindex2 = shade [obj2.getSelectedIndex ()];
  selectedindex3 = rolls [obj3.getSelectedIndex ()];
  selectedindex4 = cuts [obj4.getSelectedIndex ()];
                  
  While (LBL1. GetText(). Equals("") | LBL2. GetText(). Equals("") | lbl3. GetText(). Equals("") | lbl4. GetText(). Equals(""))
  {
  LBL1. SetText (selectedindex1);
  LBL2. SetText (selectedindex2);
  lbl3. SetText (selectedindex3);
  lbl4. SetText (selectedindex4);
                  
  GFM. Add (LBL1);
  GFM. Add (LBL2);
  GFM. Add (lbl3);
  GFM. Add (lbl4);
                  
  }
  }
  });
  }
  }

  Hi Piya,

  I run your code, and according to your logic that it works correctly.

  It's adding that line only once because according to your logic that one line can be added to MDT, if you do not want to add line on each click on the button, follow these steps:

  selectedindex1 = chart [obj1.getSelectedIndex ()];
  selectedindex2 = shade [obj2.getSelectedIndex ()];
  selectedindex3 = rolls [obj3.getSelectedIndex ()];
  selectedindex4 = cuts [obj4.getSelectedIndex ()];

  Lbl1 LabelField = new LabelField("");
  Lbl2 LabelField = new LabelField("");
  LabelField lbl3 = new LabelField("");
  LabelField lbl4 = new LabelField("");
  If (LBL1. GetText(). Equals("") | LBL2. GetText(). Equals("") | lbl3. GetText(). Equals("") | lbl4. GetText(). Equals(""))
  {
  LBL1. SetText (selectedindex1);
  LBL2. SetText (selectedindex2);
  lbl3. SetText (selectedindex3);
  lbl4. SetText (selectedindex4);
                  
  GFM. Add (LBL1);
  GFM. Add (LBL2);
  GFM. Add (lbl3);
  GFM. Add (lbl4);
                  
  }

• How to add two lines when the second row is not visible, but also gets the first data line too?

  Mr President

  Jdev worm is 12.2.1

  How to add two lines when the second row is not visible, but also gets the first data line too?

  I want to add two lines like below picture, but want the second to remain invisible.

  

  I asked this question but my way of asking was wrong, that's why for me once again.

  Concerning

  Try to follow these steps:

  1. in the database table to add the new column "JOIN_COLUMN" and add the new sequence "JOIN_SEQ".

  2. Add this new column in the entity object. (You can add this in entity object by right clicking on the entity object and then select "Synchronize with database" then the new column and press on sync)

  3. in your bookmark create button to create only one line NOT 2 rows.

  4 - Open the object entity--> java--> java class--> on the entity object class generate and Tick tick on the accessors and methods of data manipulation

  5 - Open the generated class to EntityImpl and go to the doDML method and write this code

    protected void doDML(int operation, TransactionEvent e)
    {
      if(operation == DML_INSERT)
      {
        SequenceImpl seq = new SequenceImpl("JOIN_SEQ", getDBTransaction());
        oracle.jbo.domain.Number seqValue = seq.getSequenceNumber();
        setJoinColumn(seqValue);
        insertSecondRowInDatabase(getAttribute1(), getAttribute2(), getAttribute3(), getJoinColumn());
      }
  
      if(operation == DML_UPDATE)
      {
        updateSecondRowInDatabase(getAttribute1(), getAttribute2(), getAttribute3(), getJoinColumn());
      }
  
      super.doDML(operation, e);
    }
  

    private void insertSecondRowInDatabase(Object value1, Object value2, Object value3, Object joinColumn)
    {
      PreparedStatement stat = null;
      try
      {
        String sql = "Insert into table_name (COLUMN_1,COLUMN_2,COLUMN_3,JOIN_COLUMN, HIDDEN_COLUMN) values ('" + value1 + "','" + value2 + "','" + value3 + "','" + joinColumn + "', 1)";
        stat = getDBTransaction().createPreparedStatement(sql, 1);
        stat.executeUpdate();
      }
      catch (Exception e)
      {
        e.printStackTrace();
      }
      finally
      {
        try
        {
          stat.close();
        }
        catch (Exception e)
        {
          e.printStackTrace();
        }
      }
    }
  
    private void updateSecondRowInDatabase(Object value1, Object value2, Object value3, Object joinColumn)
    {
      PreparedStatement stat = null;
      try
      {
        String sql = "update table_name set column_1='" + value1 + "', column_2='" + value2 + "', column_3='" + value3 + "' where JOIN_COLUMN='" + joinColumn + "'";
        stat = getDBTransaction().createPreparedStatement(sql, 1);
        stat.executeUpdate();
      }
      catch (Exception e)
      {
        e.printStackTrace();
      }
      finally
      {
        try
        {
          stat.close();
        }
        catch (Exception e)
        {
          e.printStackTrace();
        }
      }
    }
  

• If time machine is incremental how it removes previous versions when the disk is full, without breaking the chain, so do not be able to restore all changes since the first full file

  If time machine is incremental how it removes previous versions when the disk is full, without breaking the chain, so do not be able to restore the file with any changes made since the full backup first file...

  If the TM drive storage is full TM automatically deletes the version the oldest files for the new incremental backups can be made. Thus, in this case you cannot restore the versions that TM deleted because it takes more storage.

• How to solve a problem when the windows setup program does not open a program, says I need to install it. and an error message 1706

  How to solve a problem when the windows setup program does not open a program, says I need installation cd and a 1706 error message happens.

  Hi PAtwoodwu,

  1. what program are you trying to install?

  2. did you of recent changes on the computer?

  3 does happen with all programs?

  Check and make sure that the Windows service install is running on the computer.

  (a) click on start to reduce this includes this image, click run , type services.msc , and then press enter to open Services.

  (b) right click on the Windows Installer service and then click Properties.

  (c) if the box Startup type is set to Disabled, change it to Manual.

  (d) click on OK to close the Properties window.

  (e) right click on the Windows Installer service and then click Start. The service should start without errors.

  (f) click on the file menu, and then click exit.

• How to validate an entry when the focus leaves the intensity absorbed in

  How to validate an entry when the focus leaves the intensity absorbed in a form?

  "Ansury" wrote in message
  News:garo90$L71$1@forums. Macromedia.com...
  > Not AFAIK. Event.Target has a reference to the object that sent the
  > event. In livedocs:
  >
  > "Every event object has a goal and a currentTarget property that help."
  > you
  > Hold where it is being spread. The target
  > property
  "> return to the sender of the event."
  >
  > BUT...
  > Your if statement will never evaluate true because you compare one
  > UITextField to a TextInput. A UITextField (stored internally in a
  (> TextInput, it makes the text) actually dispatches the event.

  currentTarget gives you the object on which the event actually listener
  attached to...

• How can I stop auto scroll when the mouse pointer is placed on the scroll bar

  When the mouse pointer is placed on the scroll bar, it goes into an auto mode, scroll upward or down very fast scrolling. Happens on file selection windowswith any application, it must be Windows.

  Too bad. It was a matter of Firefox.

• Carousel stops when the mouse on the image?

  HI - USING DREAMWEAVER CC, INSERT CAROUSEL "BOOTSTRAP" AND 12 IMAGES ADDED - I HAVE a PROBLEM THAT THE SLIDESHOW IS SUSPENDED WHEN THE MOUSE POINTER IS ON THE CAROUSEL IMAGES - IT STARTS MOVING as SOON AS I MOVE THE POINTER above OR below THE CAROUSEL?  HOW CAN I MODIFY THE CODE TO SOLVE THIS PROBLEM SO THAT THE CAROUSEL IS NOT SUSPENDED ON MOUSE OVER IMAGE?  THE WEB PAGE IS www.vertical-stairway.com - thanks in advance - Glenn

  ADDITION of data-break = "false" fixes this problem - thanks to all - Glenn You can add this to the .carousel div too instead of using javascript. Add the delay time: data-interval="3000" Add if it stops at the overview or not, the options are true andfalse data-pause="false" Example would be: It worked for me.

• loop running only when the mouse or keyboard are active

  Hello

  I started a few weeks ago a pretty big VI. Most of the program is included in a large loop. But I feel it's to slow down unnecessarily. So to optimize it, I would like that the VI only works when the mouse or keyboard is acting on it. It would free up the CPU when I do not use it without having to shut it down. I found on the internet how to use the "wait for" to slow down the loop, but in doing so, some parts of the VI that must run in real time also slow down. I think that my idea should be more effective as well for applications in real-time and to free the memory.

  Accordingly, how can I ask the while loop to skip to the next iteration only when you press the mouse button or when a field is filled by the keyboard? Or is there an alternative for the while loop?

  Thank you

  Isaac

  Hello

  You can check this by using the structure of the event and monitor the activities of the mouse and the keyboard.

  I have change a simple VI to show this, please see the attachment.

  

  In the meantime, you can consult this example available on ni.com

  http://zone.NI.com/DevZone/CDA/EPD/p/ID/3924

  Kind regards

  Lou KwokHow

  AE OR Singapore

• How can I swap buttons of the mouse on a--no Microsoft Mouse with Microsoft Mouse and keyboard Center? (I have a Microsoft keyboard).

  I did a new install of Windows 8 on my Dell desktop computer that has a keyboard, Microsoft Natural 4000 and Dell's USB mouse.  Windows 8 Microsoft keyboard recognized and automatically downloaded and installed Microsoft Mouse and keyboard Center version 2.0.162.0.  However, I'm a lefty mouser and installation of the MS mouse & keyboard Center back on my right handed mouse buttons.  (I went to control panel |) Mouse and swapped buttons immediately after installation.)  When I went into the control panel. Applet of the mouse and the keyboard and mouse Center had resumed the first tab of the control panel mouse properties, stating "click here to change the settings for the Microsoft mouse.  This is the tab where the "Swap mouse buttons" is usually.  When the mouse and keyboard Center is launched, it offers only options for the keyboard.  Do I have to abandon my Microsoft keyboard or purchase functions go a Microsoft mouse to get exchanged my mouse buttons?

  How to swap the mouse buttons on my non-Microsoft with Microsoft Mouse and keyboard Manager installed mouse?

  Thank you

  C.C.

  To get all the benefits of Mrs Maes & Bishop, you can buy a MS mouse is compatilble with the Manager, MS software is for devices of Ms and it is unlikely that MS will change their software to accommodate mice made by other sources.

  If you want to keep the Dell mouse, you will need to disable MS M & K Bishop.

• object visible only when the mouse over it

  Hi guys

  I'll try to find a way to perform this action

  How to make an object invisible but when the mouse is in this area, it appears

  I mean it's white page and there is an object

  Thank you..

  You can either set its visible to false, but don't forget the rectangle, then keep checking to see if the mouse is inside this rectangle. Or an easier way would be to set its alpha to 0 and a normal mouse event to set the alpha to 1 when the user points in this area.

• across the circle when the mouse is idle?

  When the mouse is idle, dynamically create a circle and a scale. the scale must depend on the duration of inactivity mouse... so here I could not put the circle wide, but all others are made. put the code here. Please check and give me the solution to fix this problem. Thanks fo the help...

  CODE.................

  import flash.display.MovieClip;

  Import fl.transitions.Tween;

  Import fl.motion.Tweenables;

  Import fl.transitions.easing.Strong;

  Import fl.transitions.easing.None;

  import flash.display.Sprite;

  import flash.events.MouseEvent;

  import flash.events. *;

  import flash.utils. *;

  var tweenScaleX: Tween;

  var tweenScaleY: Tween;

  var scalecir;

  var i = 1;

  var for_knw:Boolean = false;

  var inactiveTime:int;

  var t:Timer;

  switcher var: int = 0;

  var posXa:Number = stage.mouseX;

  var posYa:Number = stage.mouseY;

  var posXb:Number = stage.mouseX;

  var posYb:Number = stage.mouseY;

  inactiveTime = 1000;

  t = new Timer (inactiveTime);

  stage.addEventListener (MouseEvent.MOUSE_MOVE, stall);

  t.addEventListener (TimerEvent.TIMER, onTimer);

  t.Start ();

  function startt(e:MouseEvent):void {}

  t.Reset ();

  t.Start ();

  }

  function onTimer(e:TimerEvent):void {}

  trace ("Secnds inactive mice:" + i ++);

  }

  this.addEventListener (Event.ENTER_FRAME, checkMovement);

  function checkMovement(e:Event):void

  {

  If (switcher == 0)

  {

  posXa = stage.mouseX;

  posYa = stage.mouseY;

  Switch = 1;

  }

  on the other

  {

  posXb = stage.mouseX;

  posYb = stage.mouseY;

  Switch = 0;

  }

  var cir:Sprite = new Sprite();

  cir.graphics.beginFill (0x0066CC);

  cir.graphics.drawCircle(mouseX,mouseY,2);

  cir.graphics.endFill ();

  If (posXa == posXb & & posYa == posYb)

  {

  addChild (cir);

  tweenScaleX = new Tween (cir, Tweenables.SCALE_X, None.easeNone, cir.scaleX, i, 1, true);

  tweenScaleY = new Tween (cir, Tweenables.SCALE_Y, None.easeNone, cir.scaleY, i, 1, true);

  }

  on the other

  {

  stage.addEventListener (MouseEvent.MOUSE_MOVE, startDraw);

  function startDraw(e:MouseEvent):void

  {

  i = 1;

  graphics.lineTo (mouseX, mouseY);

  graphics.lineStyle (1, 0 x 000000);

  graphics.moveTo (mouseX, mouseY);

  }

  }

  }

  I don't see the need for the i value, but if you want to keep it, you can and you can use instead the end point for the value of the scale of the tween, as in...

  tweenScaleX = new Tween (cir, "scaleX", None.easeNone, cir.scaleX, i, 1, true);

  To have the circle grow over time, you have to shoot the declaration circle out of the loop so that it is accessible to the Timer event handler function.  You can use the timer event handl. er function to take care of the scaling of the circle and settle the interpolation of...

  import flash.display.MovieClip;
  Import fl.transitions.Tween;
  Import fl.transitions.easing.Strong;
  Import fl.transitions.easing.None;
  import flash.display.Sprite;
  import flash.events.MouseEvent;
  import flash.events. *;
  import flash.utils. *;

  var tweenScaleX: Tween;
  var tweenScaleY: Tween;
  var scalecir;
  var i = 1;
  var for_knw:Boolean = false;
  var inactiveTime:int;
  var t:Timer;

  switcher var: int = 0;
  var posXlast:Number = mouseX;
  var posYlast:Number = mouseY;

  var allowDrawingCircle:Boolean = true;

  inactiveTime = 1000;
  t = new Timer (inactiveTime);
  t.addEventListener (TimerEvent.TIMER, onTimer);
  t.Start ();

  function onTimer(e:TimerEvent):void {}
  i ++ ;
     tweenScaleX = new Tween (cir, "scaleX", None.easeNone, cir.scaleX, cir.scaleX + 1, 1, true);
  tweenScaleY = new Tween (cir, "scaleY", None.easeNone, cir.scaleY, cir.scaleY + 1, 1, true);

  }

  this.addEventListener (Event.ENTER_FRAME, checkMovement);

  var cir:Sprite;

  function checkMovement(e:Event):void
  {
  If (posXlast == mouseX & posYlast == mouseY)
  {
  {if (allowDrawingCircle)}
  allowDrawingCircle = false;
     
      CIR = new Sprite();
  CIR.x = mouseX;
  CIR.y = mouseY;
  cir.graphics.beginFill (0x0066CC);
  cir.graphics.drawCircle (0,0,2);
  cir.graphics.endFill ();
     
  addChild (cir);
  }
  } else {}
  allowDrawingCircle = true;
  }
           
  posXlast = mouseX;
  posYlast = mouseY;

  }

  stage.addEventListener (MouseEvent.MOUSE_MOVE, startDraw);
  function startDraw(e:MouseEvent):void
  {
  t.Reset ();
  t.Start ();
  i = 1;
  graphics.lineTo (mouseX, mouseY);
  graphics.lineStyle (1, 0 x 000000);
  graphics.moveTo (mouseX, mouseY);
  }