How to configure vCenter Server with an external smtp server?

Similar Questions

• How to configure a VM with multiple network cards to see Agent?

  How to configure a VM with multiple network cards to see Agent?

  We can archive this requirement by configuring the subnet used view Agent.

  The subnet determines which view address of Network Agent provides the server instance to connect to view for the client protocol connections. The view on VM officer has more than one NIC

  Follow the procedure below:

  on a display Agent installed VM,

  * Recording of VM session.

  * RUN--> type regedit or type regedit.exe at the command prompt

  * Create a registry entry to configure the subnet.

  For example: is HKLM\Software\VMware, Inc. \VMware VDM\Node Manager\subnet = n.n.n.n/m type - REG_SZ.

  In this example, n.n.n.n is the TCP/IP subnet, and m is the number of bits in the subnet mask.

• How does VMware vCenter Server Heartbeat communicate?

  How does VMware vCenter Server Heartbeat communicate?

  VMware vCenter Server Heartbeat supports configurations of single NIC or multi.

  Public IP address: this IP address is used by a client to connect to an Active Server, and move between the secondary and primary servers in the case of a failover or a passage.

  IP address of the channel: this is for communication between active and passive servers. This is used for the transfer of control and an asset to the passive server data and monitoring the State of an Active Server.

  In a LARGE network, static routes are used on switches to maintain ongoing communication.

  Management IP address: this address is used to access servers in a passive role. In a multi NETWORK card configuration, a NIC will have IP addresses public and management, and an another aura NIC IP address of channel. In a single NETWORK adapter configuration, all IP addresses are on the same network adapter.

• How to upgrade vCenter Server Appliance 5.5 to 5.5 Update 1

  Hi, just wanted to know how to upgrade vCenter Server Appliance 5.5 to 5.5 Update 1. Is it with Crossover?

  Hello

  Connect to your device from vCenter:

  https:// : 5480

  Click on the update tab,

  Check the updates and then install updates.

  Takes a long time. Restart when it's over.

  And you're done

  Tim

• How to configure isa server 2006

  How to configure isa server 2006

  How to configure ISA Server 2006

  Carey Frisch

• How to configure the bluetooth with Kyocera android phone connection to share photos, music & video files

  Original title: Windows 8 Configuration bluetooth with Kyocera android phone?

  Configuration of bluetooth of Windows 8 with Kyocera android phone?  I got a laptop with bluetooth Tech. How can I set up a connection and share photos, music & video files?

  Hey GQ - Jon'Jon,.

  Make sure that Bluetooth is enabled on the computer as well as your Kyocera android phone.

  Make sure that the phone is paired with your computer.

  For information about how to configure the Bluetooth with Kyocera android phone connection to share photos, music & video files, it would be better if get you in touch with Kyocera phone support for assistance. Please see the support link:

  http://www.Kyocera-Wireless.com/support/phone/

  Please feel free to respond if you face problems with Windows in the future.

• How to configure vCenter to manage an ESXi 4

  Please help me?

  I want to know how to configure vCenter to manage an ESXi 4.

  You need the licensed version of ESXi.

  The free ESXi can be managed by vCenter.

  André

• How start/use vCenter Server?

  Hi guys, first I want to apologize to post an easy question to most of you, but it seems that could not answer this question with most of our staff here. For starters, I installed a vCenter Server 4.0 on a Windows XP Pro 32 Bit. The installation goes smoothly using the default SQL database that provides VMware. However after you have installed the server vCenter, we could not find anywhere! We tried to find it in all programs & gt; & gt; VMware & gt; & gt; & lt; And nothing! & gt;! If I'm not mistaken there must be an executable file as the vSphere Client shortcut located in the same directory?

  So far, we have concluded that the vCenter Server is installed in the computer as we gazed at the Add/Remove program list and found the vCenter Server installed! We also enabled vCenter Server Services but still nothing. We find the vCenter Server in the wrong direction or we should access the vCenter Server via a web browser? Any solutions would be appreciated.

  VMthinker wrote:

  UH thanks for your reply but I'm abit still confuse as I just want to know how to start the vCenter Server?

  The method is similar to the start of the vSphere client whereby you just double click the shortcut icon?

  vCenter runs like a bouquet of services. The installation created these services, to 'autostart' and began to their. Because they are defined in the autostart, they become active whenever the system is booted.

  I have already installed the server vCenter Server if the host of the vCenter server would be the same IP as the server ESXi?

  No, of course not. vCenter runs on a separate host Windows. The vCenter server IP address must be unique within the subnet IP used as each host must have a unique IP address.

  Even once, the vClient dowhnload, beginning as you start Word (or Openoffice), enter hostr of the vCenter server's NetBIOS name or its IP address as the destination to connect to and a combination of DOMAIN\username of a user who belongs to the vCenter server's local administrator group.

  AWo

  VCP 3 & 4

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =

• How to configure the listener with SSL

  Hi Experts,

  I use 11g R2 EE. I want to configure my database listener so that it can be connected using SSL.

  Can someone provide me guide step by step to configure the listener with SSL (including the portfolio so that comes in the image).

  The command line configurations will be well appreciated.

  Thanks in advance

  Alexander gelin

  The client configuration is the same as the server:

  1. create the portfolio.

  2 creating CSR and copy it in CA.

  3. the CSR signal with your certificate root.

  4 copy signed CRT file and root of public certificate to the client.

  5 configure the sqlnet.ora clients.

  Heavy customers already contains the necessary files. For thin clients, it is necessary to install the full or instant client.

  In SQLDeveloper, connection string should be like:

  jdbc:oracle:oci:@(DESCRIPTION= (ADDRESS_LIST= (ADDRESS= (PROTOCOL=TCPS)(HOST=)(PORT=))) (CONNECT_DATA= (SERVICE_NAME=)) (SECURITY= (MY_WALLET_DIRECTORY=D:\Oracle\client.test.p12)))

• How to configure Oracle Discoverer with EBS R12?

  Dear
  
  I hope that, by default, only oracle Discoverer is not configured with EBS R 12. How to configure?
  Any help, much appreciated.

  Naya,

  Please refer to the next note, it should be useful:

  Note: 373634.1 - using discoverer 10.1.2 with Oracle E-Business Suite Release 12
  https://MetaLink.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=373634.1

• How to download vcenter server 5.1

  Hello

  I would like to know how to download vcenter server5.1. Whenever I tried it gives me error like you are allowed to download. I need for the objective test.

  Please suggest me how to do this.

  If your company has purchased a vSphere vCenter license, your companies MyVMware admin can give you permissions to download the product, your company has obtained a license.

  That's what talking about the thing super user/administrator. So you won't get randomly download VMware rights.

  Tim

• How to configure jdeveloper 11 with the .dbc files?

  Hi all
  
  I am a new bie here. 4 jdeveloper 10, I can configure files .dbc to the setting of the project, while 4 jdeveloper 11, it's totally different. I can't find any place to set it up. How to configure the .dbc in jdeveloper 11?
  
  Kind regards
  Chelsea

  You cannot use jdev 11g for the development of the OFA...
  You must download the patch of jdeveloper on metalink to develop objects of the OFA.

  See this metalink note to find the correct version of jdeveloper, you need to download https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=416708.1

  Prasanna-

• How to configure Windows server 2008 r2

  Dear Sir.
  I installed windows server 2008r2, now I have to configure it.how to install and configure active directory, dhcp, dns.so please help me.

  Sumeet Subhedar Hello,

  The Microsoft Answers community focuses on issues and problems related to the consumer environment. Please join the public IT pro TechNet forums below:
  TechNet - Windows Server
   
  Thank you

• How to configure a button with alignment fixed points on a logorithmic scale?

  My question is quite simple, but after rooting in the button/gauge proteries, I can't find a way to do what I would like to:

  I would like a simple button with 4 possible values control: 0.0125,0.125,1.25,12.5

  I would like that they also spaced and I want the button to engage only in one of these four values

  I can get it at least to the point of having four values there by placing arbitrary markers (scale-> add the marker), but I can't figure out how to align them, or even if it is the way of Paris to follow on that.

  Thank you!

  See example LV86 attached. Open the Properties dialog box for the button for more information on its configuration.

• How to configure ACS 4 with 802. 1 X

  Hay

  How to set up my ACS server to support 802. 1 X with PEAP.in to authenticate the me (PC).

  Thank you initially

  You can skip the part of the certificate.