How to configure a SSID without output interface

Similar Questions

• How to configure a printer without wire of Canon (MG4150) to the Airport Express

  In my living room, I have a cable modem that is configured in Bridge mode. On the first floor in a room, I installed an Airport Express station. Everything works well except my printer Canon (MG4150) does not work. What is the solution for my problem?

  This Canon printer supports wireless connectivity, should just be configured to connect to the wireless network provided by the AirPort Express. Is not the way you currently put in place?

• Configure the ASM without ORACLEASM drives

  
  Guys,

  I found that right for your perticular kernel asmlib is a PAIN. (I also came to know Oracle dsnt predict asmlib rhel 6)

  Finally, we can find those, but can any 1 share knowledge how to configure the asm without Asmlib drives?

  I mean I dnt want to use/usr/sbin/oracleasm createdisk/dev/sdb5 (like this)

  Now if you ask me what operating system, my OS is RHEL 6.3, but I would like to know for all versions of configuration asmlib.

  DB: 11.2.0

  Which records exactly? Local? NAS? SAN? Single path of I/O? Multiple I/O paths?

  The Linux kernel will automatically enumerate all devices h/w - and udev to create entries of device for these devices. Then all devices scsi for devices SAN/NAS/local lands in tree in/dev automatically.

  However, the device names are not static (not even local devices as a new drive added to the server may have an impact of the names of existing devices). So in general, the names of devices directly deprecated. Same fstab/etc/fstab of the kernel utilisΘ string of identifier.

  If you have multiple path i/o devices, the multipath driver should be used.

  If you have devices path of single e/s (e.g. NAS/iscsi), then you can do the following.

  1. Identify devices using lsscsi
  2. Use fdisk to create one (for example partition 4) partition on the disk, and then assign him da (Non-FSdata) partition type. This allows you to identify via the number of partition storage devices (i.e. all 4 partition are storage). The partition type is a safeguard against accidental to mount the partition as a file system.
  3. Create a udev rule to call for partition devices 4:
     file #: /etc/udev/rules.d/99-oracle-asmdevices.rules
     KERNEL == "sd * 4", BUS == "scsi"PROGRAM="/etc/udev/scripts/localdev.sh %b", SYMBOLIC link += "asm / $result", OWNER = "grid", GROUP = "oinstall", MODE = "0660" "
  4. Create a udev script that will create a special link to device ASM to ASM to use, for example

  #!/bin/sh
  # file:         /etc/udev/scripts/localdev.sh
  # descr:        outputs logical device name for a local asm scsi target
  
  TAG="[scsi]"
  BUS=${1}
  DRIVE=`echo "$BUS" |  sed 's/://g'`
  
  targetname=disk-${DRIVE}
  
  logger -t $TAG -- "/etc/udev/scripts/localdev.sh bus=$* target=$targetname"
  
  echo "${targetname}"
  #eof
  

  So when a partition device 4 is detected, a device entry is created for in/dev/asm. I used a very simplistic device (drive-busid) naming scheme. You can get the WWID of the device and assign more readable names.

  You now discovery point ASM string drive in /dev/asm / *.

  Once you enter the basics above (it is not that the resort), you can get very creative with how you want to identify the devices for ASM usage - and how you create and name (symbolic link) of the names of devices for ASM.

• How to configure NTP between Virtual Machines without using Vsphere Client

  I have a group of 8 virtual servers of 5.5 ESXi without an Internet connection. There are virtual machines on each of these 8 virtual servers.

  I did one of these 5.5 virtual ESXi host a NTP server by editing the file /etc/ntp.conf with below configuration and

  started the ntpd daemon. He began to take the time to its local clock, here's the output of ntpq Pei

  IP server 10.108.190.14

  ip address of the client 10.108.190.15

  Server /etc/ntp.conf

  > > driftfile/var/lib/ntp/drift

  > > server 127.127.1.0 maxpoll 4

  > > fondant 127.127.1.0 stratum 10

  | ntpq Pei

  |   refid distance st t when poll reach delay offset jitter

  | ==============================================================
  | * LOCAL (0). LIUX. 10 l 2 64 377 0.000 0.000 0.001

  Then I edited the file /etc/ntp.conf on customers with below configuration but the customer would not synchronize with the server. He

  wouldn t get response from the server. Here is the output of ntpq Pei

  Customer /etc/ntp.conf

  > > driftfile/var/lib/ntp/drift

  > > server 10.108.190.14 iburst

  | ntpq Pei

  |      refid distance st t when poll reach delay offset jitter

  | ==================================================================
  | 10.108.190.14 INIT. 16 u

  Now, when I configure NPT Client/Server on virtual machines through the Configuration Option under Option Configuration time

  in Vsphere Client everything works fine and the client and the server to synchronize with each other. I checked the file /etc/ntp.conf on both the client

  and the server and it has a couple of restrict 127.0.0.1 and restrict the lines added by default kod nomodify etc.

  So why NPT Server featured when enabled via Vsphere Client works very well, but it does not work when it is configured manually

  in the virtual servers directly.

  I was connected to a vCenter Server Appliance through the VSphere Client and enabled the synchronization of time of the NPT.

  I really need to know how to configure the NTP server without using the Vsphere Client so that I can automate the

  task by writing a python script that would connect to each virtual server and NTP Client/Server configuration.

  Any help in this issue deeply appreciated!

  Thank you!

  You can configure the ntp server without using viclient.

  Take a look @ http://kb.vmware.com/selfservice/documentLinkInt.do?micrositeID=&popup=true&languageId=&externalID=1003063

  Hope this helps

  -Assane

• I do not know how to configure closingFirefox to have all tabs open next time when I open it, without calling to RESTORE PREVIOUS SESSION

  Question
  I do not know how to configure closingFirefox to have all tabs open next time when I open it, without calling to RESTORE PREVIOUS SESSION

  Tools > Options > general

  Top when Firefox starts: show my windows and tabs from last time

  You always bring up your homepage later.

• BlackBerry smartphone how to configure and use e-mail without BES

  Hello

  I'm trying to figure How to configure and use e-mail without using a BES.

  I checked with the local telephone company. And the number is not ascociated with any service of BES.

  The entry of services show no indication in this sense.

  In addition, the configuration of SIM card show that everything is disabled. This means that the phone is unlocked. At least that is my understanding.

  However, even after a wipe, the BB device does not set up an e-mail account, as described in the manual. He keeps asking for a BES activation first.

  What will do that disappears?

  And to allow the configuration of the "spam"?

  Just develop the right answer given by JSanders, you can always access your email accounts and social networks (facebook, twitter, google +, etc) on your phone, you will just have no notifications PUSHED to your phone.  You can access the internet on your phone in order to access these accounts, but it should go to them.  With BlackBerry Internet Service activated on your phone account, RIM will push these notifications of new emails, facebook messages, new tweets etc. for your phone.  That's what you'll be missing out on without active BIS.

  I wanted to just make sure that there is no likelihood of confusion.

• Unable to locate the output interface...

  Hello

  I configured a VPN of Lan Lan 2 and it works fine.

  VPN use IKEv2 authentication and certificate.

  

  Computer 1 can reach 2 computer without problem.

  Computer 1, I tried to access the intellectual property inside 2 (ping, AMPS...) but I get this error: unable to locate the output interface

  I do not understand why I can access computer IP 2 but not intellectual property inside 2 people 2 IPs are on the same network and packets go through the same features...

  How can I solve this problem?

  Thanks for your help,

  Patrick

  Hello

  I imagine that the two devices we're talking about are firewalls Cisco? I mean the VPN devices.

  Firewalls Cisco do not allow ICMP behind an interface to another interface on the same device. The only exception is when traffic is coming through VPN and enter a configuration command specific to the device that you're trying to ICMP behind a VPN connection.

  So if 1 computer needs ICMP inside 2 then the firewall with 2 inside interface must be configured with the command

  access to the administration

  Same configuration is required on the other firewall if 2 computer needs ICMP inside 1

  It can also be NAT associated configurations that may require changes, but it depends on the level of your firewall software which we don't know.

  -Jouni

• How to configure DiffServ on PC6200

  Hello

  I need to configure DiffServ on a switch of PC6248 and PC5548. Can you provide an example config coomands creating 2 classes. 1 video and 1 data and assign it at the end of the ports of the device.

  Also how to configure ports trunk with classes? It is even necessary?

  Thank you

  To use DiffServ QoS, we must first define their criteria and categories:

  1. class: create classes and define criteria of class

  2. political: create strategies, associate political classes and define policy statements

  3. service: Add a policy to an incoming interface

  Packets are classified and treatment on the basis of criteria defined. The classification criteria is defined by a

  class. The treatment is defined by the attributes of a font. Policy attributes can be defined on a per class

  each instance and it is these attributes that are applied when a match occurs. A policy can contain

  multiple classes. When the policy is active, the measures taken dependent on the class that matches the package.

  Package treatment begins by checking the class for a packet matching criteria. A policy is applied to a package

  When a class is within this policy is found.

  The Differentiated Services menu page contains

  If you had a video on VLAN 22 and wanted to assign a specific preference and assign it to port 1. Orders should look like this.

  class-map correspondence test22 ipv4

  game of vlan 22

  output

  Policy-map test23 in

  class test22

  Assign-queue 4

  output

  interface ethernet 1/g1

  service-policy in test23

  There are several different match criteria that can be used. The user and CLI guides describe the available options.

  http://www.Dell.com/support/manuals/us/en/19/product/PowerConnect-6224

  Hope this helps

• How to configure a task scheduler in apex?

  How to configure a task scheduler in the apex without code

  2740883 wrote:

  Sorry to be is not clear.

  I need to create a task that runs every 15 minutes. This work updates a certain painting of my DB. I need to do this in the Apex, so that users of my application can configure the frequency of employment

  Oracle database includes Oracle's Scheduler, which is a sophisticated job scheduler. You can set up a job scheduler to update your table and create an interface user of APEX, allowing users to change the work using the methods in the DBMS_SCHEDULER package.

  Other issues related to the creation of the APEX user interface can be requested here, but there is a forum of Planner where you refer questions about aspects of the Scheduler.

• How to configure iPhone to get an exit "braille display" correct in Chinese, traditional way?

  We realize that somebody helps us to clarify the question of using iPhone (iOS9.3)

  When you use "braille display" under the English mode, the output is correct. However, using "braille display" in Chinese, traditional mode, the result is false. How to configure iPhone to get an exit "braille display" correct in Chinese, traditional way?

  did you ask the developer of the accessory to display braille at the end of the day, they are the only ones who can provide a 100% response

• I dropped my phone from a height accidentally and now its completely broken and destroyed I can't access anything and all my photos are on it and the battery decreases very quickly please how to unlock my password without touching my screen its broken

  I dropped my iPhone 4S height accidentally and now its completely broken and destroyed I can't access anything and all my photos are on it and the battery decreases very quickly please how to unlock my password without touching my screen its broken and I can't touch I have all my studies on this subject two years ago and I still need the documents please someone help Please I need my pictures and documents

  Hello

  You must make an appointment at apple store in for breach of warranty replacement.

  You pay part of the cost of using iCloud upward when you configure new iphone.

  Even apple ID.

  See you soon

  Brian

• How to make connections on the outputs of the letter of wsn 3202?

  GOOG morning engineers,

  How to make connections on the outputs of the letter of wsn 3202?

  Sorry, I'm very confused by your response.

  You must not something on the power set by program, just connect a power supply to DIO power and mass of DIO.  Then your DIO lines should be able to output values.

  In addition, I think that you may need to configure the output line.  This would be by the project.  I don't remember what it is, but it should be in some menu properties (probably for the specific line of DIO).

• How to configure outlook express for hotmail = Icannot sending spare part.

  I had to have a laptop but have a problem with it. Hope someone can help.

  I can send emails via hotmail, no problem. But when I try to send attachments the recipient receives an error message saying: could not read.

  When I tried to configure hotmail/outlook, asked me for some program codes | don't have no or understand.

  I'm a newbie to computer jargon. Please help if you can - many thanks.

  Hi Malcolm,

  1. What is the file format of the attachments that you send?

  2. What is the exact error message when you try to configure Outlook Express with your Hotmail account?

  3. are you having the same problem with other accounts?

  4 program are. which codes you referring?

  To open the attachments, the recipient must have the software file installed in the computer. Without the software, recipient may not be able to open the files.

  To set up Outlook Express, I suggest you go through the following articles of the KB.

  How to configure Outlook Express to use a Hotmail account

  http://support.Microsoft.com/kb/220852

  How to configure Outlook Express 6.0 for Internet mail

  http://support.Microsoft.com/kb/171163

  If the problem is only with Hotmail, then I suggest you to ask your question in the Forums of Hotmail.

  http://answers.Microsoft.com/en-us/windowslive/Forum/Hotmail

• How to configure the different VLANs (using the E3200)?

  Hello.

  I want to implement different VLANs (using the E3200) so that I can have two different networks that cannot access each other.

  The E3200 is connected to a modem for internet access.

  I would like that the two networks to access the internet.

  The only E3200 does support the creation of VLANs?

  If not, is there another way I can satisfy the requirement by using the single E3200 (using something else than VLANs)?

  At the end of the day, I think that I would need at least another router.

  Thus, for example,.

  Router a (E3200) is connected to the configuration / modem to DHCP with a rank 192.168.1.1/24 LAN IP address.

  Router B is connected to the router and Setup for DHCP by using a LAN IP range 192.168.2.1/24.

  This peripheral way connected to the router A should not have access to devices connected to router B and vice versa, correct?  For example, X device connected to the router cannot ping or browse files on the device is connected to router B and vice versa, correct?

  Do I need to configure anything else on router B?  For example, do I need the DNS configuration settings so that devices connected to router B can connect to the internet without problem?  Do I need to specify that these VLANs are not bridged and which router, or both?

  I already know how to configure a static IP address, DHCP, beaches LAN IP and static DNS settings on a router, etc.

  With respect to wireless devices, I think that they would follow the same model; for devices connected to the router wireless (E3200) have access to other devices Wi-wired and connected to the router, but not to devices with or without wire, connected to router B and vice versa.  However, if the wireless devices have currently access to wired devices was also connected to the router, so it's good for now.

  Thank you very much!

  -Rami

  The E3200 has no support VLAN according to the manual. There is no way to configure two separate networks with this single router.

  You need to add network electronics.

  Ex:

  Managed with VLAN switch

  Another wireless router with VLAN

  If your modem provides several public or private IP addresses, then you could put a switch after the modem and two wireless routers that are attached to the switch.

• How to configure security center than antivirus program is installed when installed in 32-bit vista sp 1.

  could someone tell me how to configure Security Center that I install the basics of security of microsoft and anti virus program installed sercurity interface of Green Center but in section proformance and monitor system health report in the warnings section, it says not installed or antivirus detected please someone help like it _ me off thx.soz.

  It comes with Vista, upgrade install and activate Forum.

  Microsoft Security Essentials questions should be directed to the MSE Forums:

  http://social.answers.Microsoft.com/forums/en-us/msestart/threads

  Installing and upgrading Microsoft Security Essentials program.

  http://social.answers.Microsoft.com/forums/en-us/msescan/threads

  Analysis, detection and removal of threats

  http://social.answers.Microsoft.com/forums/en-us/mseupdate/threads

  Update the definitions of spyware and viruses

  See you soon.

  Mick Murphy - Microsoft partner