How to configure bandwidth allowed on the VPN IPSec ASA tunnels?
ASA 5505 8.2.1
ASA 5520 8.4
We currently have a tunnel set up between 2 ASAs
is 1 - possible to assign 1.5 Mbps of Bandwidth (BW) to this tunnel? Then if Tunnel number 2 is set up I could assign 2 Mbit to this one for example?
I'm not talking to prioritize certain type of traffic on the IPsec tunnel, I'm talking about Tunnel 1 to 1.5 Mbps of BW guaranteed for all traffic that passes through it. Same for tunnel 2
Then
2-How do to control the quantity of biological weapons in an IPsec tunnel?
Please provide documentation possible
Thank you
Johnny
Hello! Please consult this document:
https://supportforums.Cisco.com/docs/doc-1230
___
HTH. Please rate this post if this has been helpful. If it solves your problem, please mark this message as "right answer".
Tags: Cisco Security
Similar Questions
-
How to configure Outlook to display the date, they come in too?
Original title:
Dating of incoming emails
My incoming emails list the time they came. How to configure Outlook to display the date, they come in too?
Hello
Thanks for posting that ask about the Microsoft Community.
I understand that emails do not show the date on which they were received.
Are you referring to Outlook.com or Microsoft Office Outlook?
As Zigzag3143 mentioned previously, you should be able to see the dates of your emails received after 24 hours of arrival. If this function does not work for you, I suggest you check the following settings:
- View - this is located in the upper left corner of the Inbox pane, the parameters must be defined on all the.
- Reorganize by -this is found in the upper right of the Inbox pane, make sure that your emails are filed by Date.
This should fix your emails in the order of their arrival and should provide the date next to the subject line, if the enamel is older than 24 hours.
I hope this helps. Answer please if you need more help or have any other question about Windows and/or Outlook.com, we are here for you help.
-
How to configure Adobe Reader to the default program to read PDF files after you install Adobe Acrobat? I have a few other programs that need to use Adobe Reader showing 'photo' that are PDF files, and after the installation of Acrobat, it is Acrobat that opens automatically, with a message whenever Acrobat cannot be used for this and will be closed, and then the Player opens. I don't like having to see this message every time... Thank you! :-)
Hi anne-grethea26777033,.
You can do CD player as your default application by browsing in Edition > Preferences > under categories, select the "Général" and at the bottom of the window, you must select an option which reads "set as default PDF Manager" under the label of startup application and click OK.
Let us know if that helps.
Concerning
Sarojini
-
Interpret what is allowed on the VPN tunnel
Hello
I work with Cisco PIX equipment for the first time and I'm trying to understand what is allowed on one of the VPN tunnels which are established on the PIX.
I interpret this PIX did by reading the running configuration. I was able to understand most of it (with the help of the cisco site), so I'm starting to get comfortable with it. I'm looking for more help in the interpretation of what is allowed by a good VPN tunnel. Here are some details:
map Cyril 2 ipsec-isakmp crypto
Cyril 2 crypto card matches the acl-vpntalk address
access list acl-vpntalk allowed ip object-group my_inside_network 172.17.144.0 255.255.255.0
So, if I interpret it correctly, then the traffic matching ACL acl-vpntalk will go on the VPN tunnel.
As far as the lists others access dedicated, my inner interface I have:
Access-group acl-Interior interface inside
With ACL-Interior:
access list acl-Interior ip allow a whole
So nothing complicated there.
Now, just because of all this I conclude I encouraged all remote network traffic in my site. If all traffic 172.17.144.0/24 is allowed to join my network.
However, I don't know if this conclusion is correct.
This ACL is also applied:
Access-group acl-outside in external interface
And it looks like:
deny access list acl-outside ip a
I'm not sure if this ACL applies to vehicles coming from the IPSEC peer. It's for sure inbound on the external interface, but if it is valid for the IPSEC traffic I don't know.
If it is valid, then am I had reason to conclude that only connections initiated from my inside network to the remote control can come back?
Thanks in advance for your ideas.
With sincere friendships.
Kevin
Hey Kevin,
Here are my comments, hope you find them useful:
1. the ACL called "acl-vpntalk" sets traffic who will visit the IPSec tunnel, so you got that right. All traffic from the group called "my_inside_network" will 172.17.144.0/24 will pass through the tunnel, and there should be a similar to the other VPN end opposite ACL.
2. the 'acl-inside' applied to the inside interface allows any ip traffic coming out of the isnide to any destination.
3. the 'acl-outside' rejects all traffic from entering your home network, but the IPSec traffic is free and will cross because you will find a "sysopt connection permit-ipsec' configured on your PIX command that tells the operating system to allow all traffic destined for VPN tunnels without explicitly enabling it through the inbound ACL. If you have stopped the "sysopt" should stop your traffic and you will have more control on your tunnel traffic.
Personally, I usually disable the "sysopt" and control the VPN traffic in my incoming ACL.
Just a quick note, if you look more deeply into the ACL on the PIX functionality, you will find that no traffic moves inside, if she is not allowed on the external interface. For example, you can allow traffic between "inside" and "dmz" interfaces by adding an entry 'allow' on one of the ACLS applied to one of these interfaces. But when you want to allow traffic from the external interface (security level 0), you will need to allow in the inbound ACL applied on the external interface.
I could have written something vague, but I hope you get my point.
Thank you.
Salem.
-
How to configure "allowremovablemedia" parameter in the recovery console?
Hello
I recently traded a 2.5 "portable laptop HD to a new computer in order to retrieve some files. When I got to the Windows logon screen, he said I would need activate windows, before I could access the files. It now not even longer shows up this message so it connects me automatically power off when you I connection. Seeing as how I don't have another computer to place the HD, I decided to just copy the files from the HD to another location in the recovery console.
Unfortunately, the default recovery console not allow copying the files to removable media and I read that there is a parameter of the recovery console to enable the copy on removable media 'set allowremovablemedia = true' but I also heard that is not accessible without first log on as an administrator and change some settings for security policy.
Because the way I can't log in as administrator (or anyone else), I was wondering if there are other options to be able to copy files to removable media in the recovery console.
The answers would be greatly appreciated.
Create free Linux Livecd such as Knoppix and boot your computer from this CD. AprΦs the dΘmarrage, you will have full access to your hard drive and removable USB drives or network storage. The CD is also easy to create that downloading a ".iso" file then the function 'Burn Image' of any burning program allows you to burn a bootable CD. You may need to use another computer to download/burn this CD.
Knoppix: <> http://www.knopper.net/knoppix/index-en.html >
HTH,
JW -
Separated from this thread.
Have another QUESTION of community, please can someone help me on how to configure the SMTP 'STEP by STEP' settings to "SCAN to Email" function on the XEROX WorkCentre 3615 multifunction printer? Where should I start? On the computer or the printer? I have gmail emails to serve 'FROM' and for people, I'll send scanned docs, what is better to use email, gmail, at & t, yahoo or so? Thank you in advance.
Hello
Please contact Microsoft Community.
Please confirm which email client do you use?
I suggest you refer to the article mentioned to implement a multifunction device or an application to send emails with Office 365 for reference:
I hope this helps. Do not hesitate to contact again us for any technical assistance,
-
BlackBerry Z10 how to configure gmail so all the messages in the mailbox appears in the BB?
I'm having a problem with my gmail sync on BB Z10. For some reason, only two or three last messages as shown in the hub-> Email.
Is anyone know where should I look for to fix and to see all my gmail messages volume?
Thanks in advance
Strange indeed. So now, I would say that you remove then re-add, but remember to use the advanced configuration screen. During the process of account add, where it offers 'Add account' with 2 (maybe it can vary depending on the carrier) selections, the first being "Email, calendar and Contacts", instead of what to choose, tap the screen of the low 'Advanced' button and then click on the button to GMail. Be sure to use "m.google.com" for the "server address", '443' to the 'Port', ON SSL, VPN OFF and PUSH next. "Synchronize the calendar", you can choose (30 days maximum).
-
How to configure my PC for the first and after
Hello:
I have some problems with the Adobe software (especially with the first, after and Photoshop), when working with HD images (1920 x 1080 p, any format and with images of high resolution PH); the software will really slow sometimes when I use effects, such as the effects of correction of color or movement backward, or several cameras on first; the programs sometimes hang, or the empty screen to lose what I was doing...
Here is the configuration of my PC:
-Motherboard: Asus P9X79 PRO
-Processor: Intel Core i7 - 4820 K 3.7 Ghz
-Graphics card: GigaByte GeForce GTX 770 OC 4 GB GDDR5
-RAM: G.Skill Trident X DDR3 2400 32GB PC3 - 19200 CL10 (32GB) 4x8Go
-OS: Windows 7 Ultimate
-Main hard disk: SSD SanDisk 256 GB SATA3
I think with this PC, things must be faster, I tried to configure the RAM settings to give the software the max that I can, I've updated everything and I know that if I had an another SSD just for images, it would be better, but I've worked in other PC with a similar setup and they where faster... What should I do? How to check that everything is well configured?
Thank you very much!
PC hardware is not bad... as it goes.
What you really need, is the other drives... usually a disk configuration 4-5 place the OS/programs on the C drive and many others, the following "bits": project files; cache/database files; preview files; media files.
This would be a system 5 units, each option on a separate disk. And there are combos for running with 2, 3 or 4 drives total.
The other option was an array of RAID - 0 4-6 disc scratched with your system drive.
However ... Bill Gehrke, The expert on these things, reports rather incredible success using m.2 readers than a Samsung external T1, the latter able to run through a port USB3 (not nearly as high speed with external drives need more) and very usable read/write time with everything the program file being on the Samsung Q1 cross.
Here is a link to Newegg to the referenced reader...
Now, at $184 / USD, it's a bit spendy gig for the "disk space", BUT... it is big enough for most small to moderate users to have a few projects on at any given time. You just need to move things on and outside it as needed. But you compare the total cost of connection that versus purchase say disks 5 3/4-to & so that they know, it's significantly less expensive. And you can use external references USB3 large and cheaper for backend storage of work not in progress.
So... maybe that would 'fix' your questions...
Neil
-
How to configure webgate to use the form on different server login page?
Hi all, I would really appreciate help with this please.
OAM performs the authentication of the forms on IIS 6. Connection work well on my primary host.
I now need to protect another IIS instance on a different server and have installed a web portal on this topic.
How can I configure it to use the same login for this webgate form? Form: parameter must be relative not sure if this is possible.
So, I copied the original form of the connection in the same relative position on the new server and tried, but concluded that the MESSAGE to the target/access/dummy is now is more caught by the webgate and so I get a 404, rather than a redirect to my page.
Thank you very much
BernieHi Bernie,
The challenge parameter redirect in the authentication scheme is used for this. Put the server in this area (for example https://myauthserver.domain.com) and have the form: parameter against that server (for example, /public/loginform.html).
Either way, on IIS you would put the action of the form to the webgate, for example /access/oblix/apps/webgate/bin/webgate.dll
Kind regards
Colin -
How to configure jdeveloper 11 with the .dbc files?
Hi all
I am a new bie here. 4 jdeveloper 10, I can configure files .dbc to the setting of the project, while 4 jdeveloper 11, it's totally different. I can't find any place to set it up. How to configure the .dbc in jdeveloper 11?
Kind regards
ChelseaYou cannot use jdev 11g for the development of the OFA...
You must download the patch of jdeveloper on metalink to develop objects of the OFA.See this metalink note to find the correct version of jdeveloper, you need to download https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=416708.1
Prasanna-
-
How to send all traffic through the VPN, RV082 material v3
Hello
I found this guide to send all traffic to RV042 branch to the RV082 of central office:
But this guide is for the material of v2. I tried and did not work, so I wonder if there are new modules for hardware v3 (firmware v4.2)
I have a RV042 brach office connected through the VPN Tunnel work to a central office RV082. I want to route all traffic
Office of brach in the RV082 from the central office.
Thank you very much
Oliver
Hi Oliver, this is called esp wildcard forwarding (full tunnel).
Here are a few useful topics
https://supportforums.Cisco.com/message/3766661
https://supportforums.Cisco.com/message/3816181
-Tom
Please mark replied messages useful -
How to configure a port as the port of the server
I'm new to UCSM,
What are the steps for configuring a port in the ports of the server.
Step 1 in the Navigation pane, click the Hardware tab.
Step 2 tab in the equipment, develop interconnections > Fabric_Interconnect_Name > Module fixed >
Unconfigured ports.
Step 3, click on one or more ports under the Unconfigured Ports node.
Step 4 slide the selected ports and drop them in the Ports of the server node.
The ports are configured as server ports, removed from the list of ports configured and added to
the Ports of the server node. -
How to configure multiple clusters on the same machine.
I'm trying to configure multiple clusters on the same set of machines. I put the name of the cluster and multiple cases IP addresses different for each cluster. However I am still in train and error stating:
"This indicates that there are multiple clusters on this network, try to use network configurations that overlap.
Isn't this possible? If it is possible, is it still possible that I need to tell the virtual machines that they belong to different groups?
Thank you
JacobI put these lines in my script for starting a prod. For dev I REM out as below.
REM set java_opts = % java_opts %-Dtangosol.coherence.clusteraddress=224.0.0.1
REM set java_opts = % java_opts %-Dtangosol.coherence.clusterport=65432Andrew
-
How to force validation after lost the VPN connection
Hello
I did a lot of loading via a VPN connection. That lasted a few hours. Unfortunately the VPN connection has been lost. When you reconnect the VPN connection and connect in the scheme, I don't see all the data. Perhaps the transaction pending and was waiting to be engaged.
Is it possible to tell the schema, "commit all pending transactions?
Thanks in advance for any help.If your connection to the database has been lost, your session would have been rolled once the database realized he didn't have the client process. There was therefore no transaction on hold to commit at this stage.
I don't think that there is a parameter that would indicate Oracle to automatically post transactions when the client process is dead - if there were, it would be extremely dangerous, since there is no guarantee that the data is in a consistent state to the point that the customer fails.
Why are you doing a batch load via a VPN connection, probably from your desktop? Would be unwise to copy the data that you are trying to load a server in the same local network as the database and run the load it? In addition to being much more efficient, it is much easier to leave a job for some time on a server that it should keep a connection from your laptop computer for several hours.
Justin
-
Modification of the VPN on ASA version 7.1
Hi all
I have two problems to solve
- I've added 5 new network lines to an existing tunnel of B2B. Three 3 of the new route network are able to establish sessions on the tunnel but two 2 are unable. I've done a tracert to computer and track stops within the ASA. There is no newspaper showing on the SAA to suggest traffic reaches the ASA. I cloned the existing NAT and ACLs and rules static, but without success.
3 July 11, 2013 15:22:42 713902 Group = 82.199.93.3, IP = 82.199.93.3, error QM WSF (P2 struct & 0xb07054c0, mess id 0x5eafb9bb). 3 July 11, 2013 15:22:42 713902 Group = 82.199.93.3, IP = 82.199.93.3, Removing counterpart of table Correlator has failed, no match! 4 July 11, 2013 15:22:42 752012 IKEv1 has failed to set up a tunnel. Card Tag = outside_map. Map of sequence number = 1. 3 July 11, 2013 15:22:42 752015 The tunnel manager does not have a document SA L2L. All configured IKE versions did not establish the tunnel. Card Tag = outside_map. Map of sequence number = 1.
Thankx
The error message "Approved Removing from table Correlator has failed, no football match!" shows the most often only remote tht doesn't have the mirror image configuration to allow traffic between the VPN and so some of the IKE SAs did not form.
Maybe you are looking for
-
HP Deskjet 2132: Printing borderless photos
How to print pictures without borders? My printer is capable of printing photos bordless?
-
Multiple reporting of test problems in TestStand 4.1.1
We lack TestStand 4.1.1 and LabVIEW 8.6.1. We have a vast repository of production and test fixtures, with lots of code-sharing and others. We build installers for all of our tests and deployments every night with a build server automated. We have
-
hpdeskjetf300: control of the ink levels
I used to be able to check properties-tools-and printer, my levels.i of ink no longer have this option.i also have more hp solutions
-
Replacement for MS flight Simulator 2004 disc
(Original title: due to two separate 4th Ms Flight Simulator 2004 disc failures, I need a replacement drive and jut bypass the run another site Ms.) Over the past twenty years, I bought two new editions of the MS Flight Simulator 2004. In both sets t
-
How can I reactivate it CS6 on my computer? -activate option does not appear in the Help menu
How can I reactivate it CS6 on my computer? -J' disabled it when I took the computer home and now I can't turn it back on... the enable option does not appear in the Help menu.