Similar Questions

• How to check the webnode load balancing?

  Hi I know where my corrections are load-balanced in all nodes in my web.
  
  
  For example, I have 3 nodes of web (web1.example.com, web2.example.com, web3.example.com)
  
  
  How will I know if my new connections are routed to all nodes in the web.
  
  
  AND how do I know the number of connections from different nodes.
  
  
  Thank you
  Prasad

  Hi I know where my corrections are load-balanced in all nodes in my web.

  For example, I have 3 nodes of web (web1.example.com, web2.example.com, web3.example.com)

  How will I know if my new connections are routed to all nodes in the web.

  AND how do I know the number of connections from different nodes.

  Check Apache log files on each of the nodes (error_log * and access_log *) and you will find the entries you want.

  You can also get more details the software load balancing.

  Thank you
  Hussein

• I'm looking for the "VDM Load Balancing Guide"

  Hello!

  I'm looking for the VDM Load Balancing Guide, who was in "https://www.vmware.com/files/pdf/vdm20-load-balancing-guide.pdf" a few years ago?

  Someone does have this document and can give me?

  
  

  Best regards

  
  

  André
  

  First success on the googles:

  https://www.google.se/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&uact=8&ved=0CDEQFjAA&url=https%3A%2F%2Fdocs.google.com%2Fleaf%3Fid%3D0BxcOSOsB0UCQMzIxNWYwZjMtMmQ2NC00Njk4LThiM2UtMTE0NGZhYWNmYTRi%26sort%3Dmoddate%26layout%3Dlist%26pid%3D0BxcOSOsB0UCQOGVlNDBiN2UtNGNiMy00ZGU1LThkNGItNjZjZTg0YzgwYzI2%26cindex%3D12&ei=sgctVOXdGMLGygPpjIGYAw&usg=AFQjCNHgwY3UMSM2NaQCy7pbeUF6mUq3Rg&sig2=VLy1QMDMaAbCNHzWGKRgfQ&bvm=bv.76477589,d.bGQ

• How to configure a FTP server and the web and integrate with 5.2 DMM

  Hi all...

  I need to set up an external server only for publishing content to reduce the overhead of the DMM server.

  can someone guide me on how to configure the external server and it intergrate with the DMM 5.2

  Thank you

  semuthu,

  
  

  Notes from the Release Notes:

  
  

  Limitations of compatibility with Microsoft Internet Information Server (IIS)

  DMP who use firmware version 5.2 is compatible with a single version of Microsoft Internet Information Server.

  This supported version is IIS 6.0 for Windows 2003 Enterprise Edition. If you do not have the support for IIS version but

  want your DMP to recover the assets of a Web server, we recommend that you use Apache instead of IIS.

  
  

  
  

  I suggest to use Apache instead of IIS for the Web Server service. IIS can be used as FTP if necessary.

  There are a lot of Documents on the Internet concerning the implementation of Apache and FTP servers.

  
  

  Using Apache with Microsoft Windows

  http://httpd.Apache.org/docs/2.0/platform/Windows.html

  
  

  Quick HOWTO: Ch20: Apache Web Server

  _ http://www.linuxhomenetworking.com/wiki/index.php/Quick_HOWTO: _Ch20_:_The_Apache_Web_Server

  
  

  Once the Web server is configured and operational. You simply record your multimedia content on the Web server

  and then have your DMS assets in the library using an external URL address for its location.

  
  

  If you want to use the external server for other features in the DMM, you can see how to set up

  here:

  
  

  http://www.Cisco.com/en/us/partner/docs/video/digital_media_systems/5_x/5_1/DMM/user/guide/DSM+ETV.html#wp1073210

  Goto the section just below the CNSC & WAAS...

  
  

  If this answers your question, take the time to mark this

  discussion answered & rate the answer.

  
  

  Thank you!

  
  

  T.

  
  

• How to configure Task Scheduler to run the program when the connection is established

  Windows 7 64 bit
  Dial-up Internet access

  I want to use the Windows 7 Task Scheduler to run a program IMMEDIATELY AFTER a dial-up connection is made to the internet.

  How can I configure the Task Scheduler in Windows 7 to do this, please?

  I am familiar with the Scheduler of tasks with the command line parameters.  Any help is appreciated.

  Thank you

  FYI: If an example is needed, Microsoft Security Essentials can be configured to update virus through this path with the argument definitions:

  C:\Program Files\Microsoft Security Essentials/MpCmdRun.exe SignatureUpdate

  Maybe someone can use it to show how to configure the Windows 7 Task Scheduler to update MSE virus definitions, once the connection dial-up was made?

  Otherwise, for example, another program to run once established a dial-up connection would be OK, thanks

  Hello

  Scheduler of tasks is time driven.

  For order-driven event, you need a script.

  Question like that is much better treated in the TechNet IT Pro Forums.

  My moderator tools cannot transfer messages on Windows forums, please re - ask you question there.

  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/threads

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• How to configure WebLogic Admin Server and the managed server

  Hello
  
  I work to configure a Weblogic admin and the managed server, but fail.
  Can I know the correct steps for the installation system?
  
  
  TX.

  Good. It might be a good idea to mark this question as answered, then.

• Console Proxy doesn't work is not behind the edge load balancer

  I have a strange problem. I set up a load balancer with vShield Edge. Behind the load balancer, I have two cells vCloud. The Web interface works very well for users, but trying to connect a VMRC to view remote screen it displays 'connection' and then the session is disconnected.

  Then I stop the first cell and users can establish a VMRC connection again. When I activate the first cell once again, the web interface continues to work, but not the proxy of the console. Then I stop the second cell and now elements of the console working again.

  Any tips?

  Gabrié

  Have a similar setup and had the same problem.  Two things to check.  Go to c:\users\\appdata\local\temp\vmware- and open the last file vmware-vmrc - xxxx.log.  Towards the end, it should tell you why it's a failure.  For me, it was a conflict of thumbprint SSL, dating back to the different SSL certificates on the cells.  Also, be sure to vCloud Director Administration-Public address you have the right audiences VCD console address specified. To resolve the inconsistency of my mark, I just created a file certificates.ks a cell and then copied on the other cell and reran the script configures.  Good luck with VMware to help.  I opened a folder for this issue 6 days ago and have yet to get any help!

  -Craig

• The side load balancing test server

  Hello
  Can anyone tell me about any test cases for server side in a 11.1.0.7 RAC load balancing?
  
  I have a 2 RAC nodes with either local_listener and remote_listener correctly (for load balancing server-side). For the test, I create a TNS to my side client that points to a single node of the PAP (a single ADDRESS entry pointing to node 1 of my CARS). So, this customer, whenever I log in, it always connects me node 1 I mentioned in the LMO. This means that server-side load balancing works jointly with the client side only load balancing and I would also add the address entered my TNS for the second node? If Yes, then how can I create a test case to check server load balancing?
  
  Thank you
  
  Salman

  Dear Salman Qureshi,

  There is a small video about load balancing server (http://www.dsvolk.ru/oracle/racdd4d/demos/video/loadbalance/server/serverloadbalance_viewlet_swf.html)

• The storage load balancing process

  We have a group of 4 members, total approximately 30 TB of space. In the past, we had a lot of volumes of 500 GB for ESX, after the installation of the ESXi5.1, we use higher volumes, about 1.5 TB. So there are a lot of changes in the storage pool. We find that the EQ is balancing of storage compared to 4 members as expected. We thought it was over two or three days agoo, but now he's balancing... then again for a couple of day all volumes are spread over 3 members, also, as expected, but he decides to charge storage it swings again... and again...  It is coming to an end sometimes?

  We have another group with 4 members and also the same amount of space, but it we do not use the 1.5 TB volumes again... here, we see that EQ is continuous storage load balancing pool.

  Im not worried yet :)), but whenever volumes are redestributing compared to members, it does not follow on some reconnects for ESX as the part of a volume can and will reside on another Member where on that time esx is not a connection to that session at that time.

  Hello René,.

  It will not be stuck in a loop.  Part of the balance to the maintenance of free space between the members.  So when several pages are written to a specific member, space balancing will create plans to move the blocks to the other members to free up space on this member.  It's an ongoing balancing act.  In addition, extended periods of heavy i/o load balancer Advanced Performance will swap pages in order to compensate for the latency between members.

  Kind regards

• See the connection to the server, load balancer & physical workstations

  We deploy a VMWare view environment and we use a combination of physical and virtual desktops.

  When install us the Agent to view physical workstations with the /V "VDM_VC_MANAGED_Agent = 0" settings. " This allows to specify the Server Manager to view to record the workstation during installation.

  So far we've just been specifying a connection view servers and everything was fine. But now we are getting our deployment and we want to ensure that we have the appropriate redundancy built in.

  If the server connection view that physical workstation is registered during installation fails, is grave view agent automatically knows to start watching one of the replica servers?

  If it isn't... We are keen to implement a load balancer between the workstations phyiscal on connection view servers. Are there problems with it?

  I found many articles balancer redundancy and load for VMWare View, but none don't talk specifically a load balancer between physical work stations with the agent of the view and connection servers.

  Take a look in the registry on the physical Machine, he must list all available connection brokers it.

  Linjo

• How to configure Firefox tabs are on the lower line of the toolbar.

  I use Firefox 16.0.1. The tabs for Firefox Windows are on the line on the right toolbar underneath the toolbar 'File/Edit/.../Tools/Help '. How can the function using customize, I set up Firefox so that the tabs for Firefox Windows are on the lower line toolbars?

  From Firefox 16 (or 15, perhaps), the previous method of right click in one area of the toolbar and unchecking "Tabs on Top" has been deleted by developers. Now, this option appears only when the tabs are not on top. Then soon a you select the element "Tabs" at the top to move the tabs to the top, the item disappears from the context menu. I don't know the reasoning of the developer to change the way works this option. In my view, an easier way for users would be a checkbox in the Options > tabs for "tabs at the top.

  Starting from Firefox 16 (or 15, perhaps), to move the tabs at the bottom of the toolbar (not ' On Top') area, you must change a preference using the topic: config.

  • Info on: configuration and usage - http://kb.mozillazine.org/About:config
  • To change the option so that the tabs are not on the top, find the preference browser.tabs.onTop using about: config, and then double-click the preference, or do a right-click then choose turn on/off, change the falsevalue. (true = tabs on top, false = not on the top tabs)

• How to configure PXI-8464 to use the channel API

  I have a PXI-8464, but I don't know how to set up so that I can access block API of ways.

  Normally, I can choose the NPC channel by selecting "CAN0". For example, I can do it to the MAX:

  

  Then I can, just select "CAN0" in VI:

  

  However, on my remote system, it looks like this to the MAX:

  

  Notice how there is no "CAN1" or anything like that. Therefore, in the VI, it has a long list of channels CAN, but none of them can be used to connect to my channel PXI-8464.

  

  How do I get my CAN map to work? Thank you.

  Hi Bladhart,

  You have configured the NPC card via MAX for the RT system?

  Here is a link that might help!

  Configuration of a real-time Application of NI-CAN to the MAX

  http://digital.NI.com/public.nsf/allkb/D2D8B947369F453986256F89006F40B0

  Thank you!

• How to configure Outlook express account with the Gmail account?

  Original title: I want to configure my outlook express to receive and send to my gmail account.  I'm not familiar with the POP SMF accounts.  Help, please

  HOW CAN I SET UP MY OUTLOOK

  1: enable POP in your Gmail account:
  http://mail.Google.com/support/bin/answer.py?answer=13273
   
  2: configuration of your e-mail to Gmail client: Outlook Express and Outlook 2002:
  http://mail.Google.com/support/bin/answer.py?answer=13276&topic=1556 
   
  Configure your Outlook Express client to work with Gmail:
  http://mail.Google.com/support/bin/answer.py?answer=76147

• How to configure proxy services to use the file transport?

  Hello
  
  I configured a proxy service to query for files in the specified folder. And it is configured to use the file transport.
  
  While running, I get the exception - follwing
  
  
  < 27 April 2012 4:08:28 PM GMT + 05:30 > < error > < WliSbTransports > < BEA-381602 > < error has occurred during the elections of the ProxyService service endpoint resource $ ServiceTypes_SB$ BinaryService: javax.naming.NameNotFoundException: while trying to search for "wlsb.internal.transport.task.queue.file" did not find subcontext "wlsb. Solved "; other name "wlsb/internal/transport/task/queue / '.
  javax.naming.NameNotFoundException: while trying to search for "wlsb.internal.transport.task.queue.file" did not find subcontext "wlsb. Solved "; other name "wlsb/internal/transport/task/queue / '.
  at weblogic.jndi.internal.BasicNamingNode.newNameNotFoundException(BasicNamingNode.java:1139)
  at weblogic.jndi.internal.BasicNamingNode.lookupHere(BasicNamingNode.java:247)
  at weblogic.jndi.internal.ServerNamingNode.lookupHere(ServerNamingNode.java:182)
  at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:206)
  at weblogic.jndi.internal.WLEventContextImpl.lookup(WLEventContextImpl.java:254)
  Truncated. check the log file full stacktrace
  
  Ask for help to solve this problem.
  
  Thanks in advance.
  
  Concerning
  Shyam.V

  Internal JMS queues depends on OSB are not there for some reason any.

  Are all correctly target JMS servers?

  How did you create the domain and all the managed servers are started?

• How to configure Firefox to get always the newest updates of content.

  Site updated. Open Firefox, went to the site and displays the older version. Made of the research. Found this problem is known and clear cache allows the update of content to display. But this is not a permanent solution and should even do whenever I want to see content recently updated. You want to configure the settings of the browser to always retrieve updates.
  Thank you!!

  You can reload webpages and ignore the cache to refresh potentially stale or corrupt.

  • Hold down the SHIFT key and click the Reload button
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Command + shift + R' (Mac)