How to configure rdm to use iscsi lun in a virtual machine using ms iscsi initiator?

Similar Questions

• How to configure HA when vCenter is running as a virtual machine in one of the army?

  To install HA with VMware EVC, guests must be first maintenance mode before moving into the HA cluster. The problem is, vCenter runs as a virtual machine inside one of these hosts. If I stop vCenter downwards so that the host in maintenance mode, how do I setup with VMware EVC HA without using vCenter?

  If you do not feature vMotion, right down your vCenter VM and you unsubscribe eg. ESX1 can record for example. ESX2 then turn back on. ESX1 maintenance mode and then back ESX1 on your cluster file and exit once done maintenance mode. It goes the same for ESX2 and the rest of the ESX host.

• connect several LUN to a virtual machine

  Hi all

  I was wondering is it possible to connect multiple LUNS to a Linux VM? We want to store data from different departments in separate LUN. Any suggestions are appreciated.

  Thank you

  Ke

  Hello.

  Yes, you can present several as RDM LUN to a virtual machine.  I have a Windows file server built exactly as you described, using the same approach.

  Good luck!

• How to enable 3D Graphics and HD audio on a virtual machine?

  How to enable 3D Graphics and HD audio on a virtual machine?

  The 3D support is supposed to allow the possibility for the graphical interface of Windows Aero, in order to test with a Windows 7 if possible.

• How to configure webgate to use the form on different server login page?

  Hi all, I would really appreciate help with this please.
  
  OAM performs the authentication of the forms on IIS 6. Connection work well on my primary host.
  
  I now need to protect another IIS instance on a different server and have installed a web portal on this topic.
  
  How can I configure it to use the same login for this webgate form? Form: parameter must be relative not sure if this is possible.
  
  So, I copied the original form of the connection in the same relative position on the new server and tried, but concluded that the MESSAGE to the target/access/dummy is now is more caught by the webgate and so I get a 404, rather than a redirect to my page.
  
  Thank you very much
  
  Bernie

  Hi Bernie,

  The challenge parameter redirect in the authentication scheme is used for this. Put the server in this area (for example https://myauthserver.domain.com) and have the form: parameter against that server (for example, /public/loginform.html).

  Either way, on IIS you would put the action of the form to the webgate, for example /access/oblix/apps/webgate/bin/webgate.dll

  Kind regards
  Colin

• LUNS shared between virtual machines? How?

  Hello..

  I shared LUN for ESXi host and now I want to have a shared LUN for my VMs too how can I do?

  Logic unit number that I want to do shared is already shared between my esx hos, can now do the same LUNS shared between my VMs? Is this possible?

  Tring to use RDMS, but when I assign shared my LUN shared for ESX host so not able to assign the same to another virtual computer that is located on another host ESX ESX LUN to my VM, its goingfrom

  Any idea?

  Thank you

  Once you have assigned to a virtual machine the RDM will be disppear. However as a virtual mode, there is a hard pointer created in the data store. then go on host2 make sure he has access to the LUN, and then add the pointer hard on the virtual computer via the existing disk option.

  iDLE-jAM | SC 2, SC 3 & VCP 4

  If you have found this device or any other answer useful please consider useful or correct buttons using attribute points

• Where and how to get the downgraded version iSCSI initiator?

  Is there a place for older versions of the microsoft iSCSI initiator?

  We are trying to install a piece of legacy equipment and the last confirmed the version that has been tested is V1.05a

  Kind regards

  Drew

  Hi Brainojack

   

  Please refer to the below provided links and check if the provided versions help you. -

  http://www.Microsoft.com/windowsserver2003/technologies/storage/iSCSI/default.mspx

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=12cb3c1a-15d6-4585-b385-befd1319f825&displaylang=en

   

  But it does not seem you can get versions older than those set forth above. So I suggest you use your favorite search engine search for third party links that can provide you the version you need.

  
  NOTE- Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

   

  I hope this helps.

• How to set up the console for VROPS on a virtual machine?

  Hello

  In short, I have a configured 5.5 on a Windows 2008 Server vCenter. I installed vROPS 6.0 using the EGG file (connected to a host ESXi 5.5). However, when I try to open the vROPS console, I can't ping the IP address on the console (something like 192.168.0.10). How can I configure the console vROPS? I checked if I could install the file of EGG vROPS on a vCenter installed on a virtual machine, and it seems that it is possible. Is that correct, or am I missing something?

  Kind regards

  Timmy.

  Take a look at this post if you are missing some configurations: vRealize Operations Manager 6 & ndash; Installation & laquo; All virtual

• How to reset the administrator password in my Windows XP Virtual Machine

  I just created a Windows XP virtual machine and have been using it without any problem.  Today, I started the machine and he asked an administrator password.  I believe that I have not set up one that I've never been asked before.

  How can I reset my password or I have to rebuild a new machine?

  Can I use a password reset utility?

  Thanks in advance for any help.

  Kind regards

  Doug U - M

  If an empty password does not work then you probably have to rebuild the virtual machine. This time, I recommend adopt you the practice of setting up a second admin account immediately and make a note of the password. It's the same when you buy a new car: you get at least two sets of keys.

• How im can extract the value of the persistence of virtual machine disk?

  Dear friends

  How im can extract the value of the value of the persistence of disks of virtual machines?

  IM using the bellows of the order, I have a if to check if the disks are independent or not

  but im only want values of the persistence of the column to use in my script

  Get-disk hard - vm machine01

  CapacityGB persistence Filename

  ----------      -----------                                                    --------

  10 000 persistent [LUN2] RJ7469SR039/RJ7469SR039.vmdk

  8 000 persistent [rate2] RJ7469SR039/RJ7469SR039_1.vmdk

  Thank you

  Almir

  In your example, you just use Select-Object

  Get-disk hard - vm machine01 | Select the Parent, persistence

  The parent is the name of the virtual machine

• Hello. I need help developing a PowerCli script that will show me the current configuration of the video Ram of each individual virtual machine on a host\cluster or a vcenter. Can you help me?

  I have a script that will allow me to change the configurations of VRAM, but I need a script that retrieves the configuration of all virtual machines VRAM in my infrastructure.
  I need to get out information to a csv file and run this report on a monthly basis... can you help me?

  Right now my environment is mixed. I have Windows XP virtual machines set to 4 MB, Windows 7 virtual computers set to 8 MB and a subset of sall of virtual machines set to automatic detection of settings.

  I need to be able to recover these settings in a CSV file in order to use this information for comparisons of trdouble-shot performance issues...

  Thank you.

  

  Try something like this

  Get - VM |

  Select Name,

  @{N = "OS"; E={$_. ExtensionData.Config.GuestFullName}},

  @{N = "VideoRamMB"; E = {}

  [math]: Round (($_.)) ExtensionData.Config.Hardware.Device |

  where {$_-is [VMware.Vim.VirtualMachineVideoCard]} |

  (Select VideoRamSizeInKB - ExpandProperty) / 1 Ko, 1).

  }} |

  Export-Csv vm - videoram.csv - NoTypeInformation - UseCulture

• How to set up the generic dashboard for the specified virtual machines

  I have two question about "generic dashboard":

  1. I use the tag to classify certain virtual machines by role QA, DEV or PRD. If I select "Kind of resources", and then select all VM under a label, window "metrics selector" will be watch only "vCenter generated Operation Manager", it does not show metric VM. How can I see it?

  2. If I select the 'Resources' mode, then I'll be able to see the VM metrics on the window "metrics selector", but I must key in each VM name "Label to the area", it takes a lot of time if I have a lot of VM, is there no matter what symbol I can use to match this field with name column "resource"?

  Mode 'Resources like' or 'Resource', both ok for me, I want to just install a widget to display using the specified CPU VM real fast.

  Any information is appreciated!

  You will see that vC generated Ops metric because you are looking at the tag, which is a resourcekind. This switch of resources is "not" a filter label, these are the actual resources. If you want to see all the virtual machines, select the resourcekind 'virtual machine '.

  Generic dashboard is rarely used to show - all - kinds of resources, it is generally used for static selection for specific purposes. If you want to display all types of a resource type and apply a tag filter, you can select a different widget to display this information.

  There is no symbols that can act as wildcards, as you suggest. When you are 'kind of resources' mode, you need not fill out a label for the box.

• vCD API - how to call updateDisks to resize the disks of a virtual machine?

  Had to think about where to post this question; vCD forums or here. I chose here because it's the API specific vCO for vCD and not versions of Java/.NET working team of vCD.

  I'm going to build a workflow to allow my team to change the size of a disk. This disk is part of a virtual machine that vCloud Director 'property '. I heard several times to not only change the size of the disk in vCenter as then vCD runs a risk of being confused. I have reviewed the vCO API for the vCD and found that the VclVM object contains the set of disks (VclVM.disks) as a property. This returns an array of VclVirtualDisk. There is a method VclVM.updateDisks (VclVirtualDisk []), which seems to do exactly what I want. Update disk sizes (could be used to add new facilities). I have a bit of a problem to find how to call it from my point of departure.

  // selectedDisk: a string selected by the user
  // selectedDiskSize: a number input by the user
  
  var disks = virtualMachine.disks;
  
  for (var i = 0; i < disks.length; i++)
  {
  
       if (selectedDisk == disks[i].itemResource.elementName.value)
       {
            if (selectedDiskSize <= disks[i].hardDiskSize)
            {
                 throw "New disk size (" + selectedDiskSize + ") must be larger than original disk size (" +
                      disks[i].hardDiskSize + ")";
            }
   
            disks[i].hardDiskSize = selectedDiskSize;
       }
  }
   
  virtualMachine.updateDisks(disks);
  

  
  

  'HardDiskSize' the call throws an error. It is a property read-only and is not a method. The API documentation don't do a good job to define all the methods where I can build a new VclVirtualDisk object. or clone an existing one.

  My thought was to update the existing structures of the disc and then pass them to the updateDisks (...) method. Yes, change an internal structure of an object from the outside is not something I should be doing.

  Any suggestions on how to "clone" this VclVirtualDisk object to change?

  If someone of the vCD of the vCO API team is looking, even updateDisks (...) method will do what I want? Or I have to watch fall down to Java to achieve?

  
  Thank you!

  If I remember correctly the ability to change the size of an existing drive is not available in API vCD 1.01.

  Christophe.

• How can I access all of my local readers of Virtual Machine

  Hello... IAM a newbie here and just installed VMware Server 2.0.1 on my windows xp (laptop). Guest operating system is Windows Server 2003. I have 3 partitions in my host. That is, C, D, E drives.

  I installed VMware server on C:\.  What is the problem how can access all my local drives on the host of the virtual machine operating system.   (I can only access the Virtual Machine's hard drive).

  Could you please help me in this issue...

  Thank you and best regards,

  Indianmale...

  use of the network / sharing on your file systems

  Please reward points - we must know if we helped.

• How can I make a copy/clone of an existing virtual machine?

  I have VM Fusion 2.0.2 running on my MacBook.  I have several virtual machines running, and I would like to copy them and use it as a starting point for a new virtual machine.  I know how to take a control point, but what I want to do is to create a single independent computer separate from an existing machine.  is this possible?

  I have VM workstation 6 running on a PC and I know I can do it by cloning the virtual machine, I just want to make something similar.

  Licensing issues aside...

  With Virtual Machine to stop target, not suspended...

  CTRL-click on the entry of the Virtual Machine in the Virtual Library Target Machine and select Show in Finder and closing of the merger.

  CTRL-click on the target Virtual Machine in the Finder package and select duplicate and it will create a copy of the virtual computer target package in the naming convention of "copy" and you can rename the Package by selecting and pressing ENTER.

  Open Fusion and drag and drop the Virtual Machine copied/renamed on the Virtual Machine library package to how you can change the display name of the Virtual Machine library.

  The first time you start the virtual machine copied/renamed be sure to select "I copied it".

  Note: If you are using Windows then you will need to run NewSid to change the name of the computers and the security identifier.  Also if Windows and not a VLK version, you need to activate Windows again.