Equium M70 will not pick up my wireless network

Similar Questions

• Hi I have my computer will not pick up my wireless signal, but it captures others, in small residence also other devices pick up thanks for link wrong signal strong whats for your help

  Hello

  my computer will not come up to my wireless signals same signal is strong, but it picks up other signals wireless in apartments even block
  Thanks for your help

  Hello edwardmurray21,

  Thank you for the question!

  It is disheartening to know that have problems you with the wireless signal. As I understand it, you are not able to choose wireless sugnals.

  I need to ask you some questions to help you best.

  1. what operating system is installed on the computer?

  2. which browser is installed on the computer?

  3. What is the brand and model of the router?

  Answer to us if you are having problems with the signals wireless or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.

• Equium A210 will not pick up external audio

  Hello

  When I right click on the volume icon in the taskbar and goto devices on reading
  If I open the recording tab, my laptop completely freezes, don't know why.
  Should have asked months ago but has not used this has many, but needs sorting.

  Also, I noticed that my laptop will collect all outside sounds
  I mean that I normally use a lead with two ends of helmet, one in my stereo
  And the other connected to the laptop in the front, I do the conversion of old Mini MP3

  Any suggestions please?

  Thank you later!

  Hello

  What satellite you exactly and what port you used to record audio from external device?
  Have you used the microphone port?

  I doubt that your laptop supports the audio-in port so I don't think you can connect the external device in this case.

  PS: If the laptop freezes completely why you n t try to update the audio driver.
  If this will not help then you should check if a new installation of the OS would help you.
  Could the laptop freezes for two reasons; hardware or software problem.

  First, there are the software isn t interesting question and the new installation of the operating system allows you to check that would help!

• HP Officejet 6500 a: printer will not connect to the wireless network.

  I got this HP printer for a while and it worked fine.  Our old router is out and we had to get a new one.  Installed perfectly and printer continued to work properly.  The password for the router was ridiculous, that's why I changed it to something much more simple to remember.  Since then, my printer will not connect to wireless internet.  I have a ~ and reinstalled the printer but still have the same problem.  I thought maybe to try the former password would, but who does not work either.

  Anyone has any ideas that might help before chuck it and go and get a new one altogether?

  Thank you.

  Easy things first.  Turn off the router and the printer.  Turn on the router and wait 3 minutes.  Turn on the printer and see if it connects to your router.  Status?

  If no joy, temporarily disable all security in the router.  Now try to connect the printer to your SSID not guaranteed without password.  Status now?

  If OK, go back and add WPA2-AES with your simple password.  Status now?

• HP 7520: HP 7520 will not connect to the wireless network

  There is some additional information to

  http://forums.Xfinity.com/T5/home-networking-router-WiFi/HP-7520-will-not-connect-to-wireless-networ...

  on this issue.

  Have several APs for a single wireless network allows the printer foolish law.  (Not a Repeater, a second AP connected to the local network with the same configuration of network for security, etc.).

  I solved this problem.  In accordance with the discussion on the link, the problem is that the printer cannot connect to a wireless network if there is greater than 1 for a wireless network (SSID) name wireless access point.

  This thread has had several useful suggestions, but what finally solved the problem, it's the second point has access to a mode where I can create a 'virtual' access point and, above all, a SSID associated.

  Note that not all access points or routers support virtual APs, but this function seems to be more common over time.  Older models is not able to do that.  However, a new access point is sometimes cheaper than a new printer.

  If you do not understand the jargon in the procedure below, I recommend that you find someone who does, then they can do it for you.

  Solution:

  1. On one of the wireless access on the network, create an a new virtual AP with a slightly different name SSID (for example < name of the network - > _1), on the same VLAN (usually VLAN 1).  You may need to put the AP in "multiple AP mode" or something similar, and then restart the AP.  All other settings (DHCP, security, mixed mode b/g/n, etc.) must be the same for the new SSID.
  2. Run the printer Wireless Setup and connect it to this new SSID
  3. Confirm that the printer can be seen by other devices on the network

  Tips:

  • Check the security is the same as the original SSID, Alternatively you can create a vector of insecurity in your network.  Do not WEP-128 when the other SSID uses WPA2 AES, for example.
  • The AP I had had several resets to make it work because of the mode and parameter changes.
  • If you connect the SSID but cannot connect to or be seen by anything on your network, check the new SSID/AP is in the same VLAN as the original.
  • Because the printer is not roaming, and the speed is not a problem for me, I used the access point that could support this solution, which is deeper and slower than my primary AP.  I have not noticed any problems.

  The printer has been reliable on the wireless now on the new SSID, 48 hours.

  I have not upgraded any software on a client of the printer (PC, Mac, phones).

  I think that it is a positive confirmation that the problem is with the implementation of the printer of the stack of network and not with the driver or client software on remote devices.  The 802.11 protocols provide for a network name (SSID) wireless with several access points using different MAC addresses.  I suggest this HP look into this as a potential bug with their network printer for the 7520 protocols stack.

• OfficeJet 4620 3-in-1 printer will not print on the wireless network

  Have updated my Mac OSX to Yosemite (10.10), & now the 4620 Officejet will not see my WiFi network.  Have already uninstalled & reinstalled, used USB and installation CD.  Restarted the router also.  The printer went as far "Retore System Defaults".  Any suggestions?

  THX

  Hi @tomiet,

  Welcome to the HP Forums!

  I see that your HP Officejet 4620 will print on your wireless network, using Mac OS X 10.10. I'm sorry to hear that, but I'm happy to help you!

  I recommend trying an installation installation of Wireless USB. Please consult this guide, convert a wireless USB connected printer. In addition, this video can help as well, Configuration of wireless USB printers.

  I hope this will solve your problem of connection and have a nice day!

• DeskJet 3050 a will not connect to my wireless network

  I absoulutely can't get my Deskjet 3050 has to connect to my home wifi connection.  It is a Motorola modem/router (wireless) model SBG6580.

  I went through the doctor for help (don't show me the wireless information.  The button did not work.  I tried to use my home password and id, but it does not work.

  Any help would be greatly appreciated.

  To connect to the printer Deskjet 3050 to a wireless network, you will need to temporarily connect to the computer with a USB cable. I'll link the instructions detailed below. If this does not work, let me know and I'll see what I can do to help.

  Install the software of the product for a wireless network connection

• New wireless printer will not see my router wireless/network

  I have checked the other posts, but their issues are a little different from mine.  I just bought a new wireless printer.  I got Samsung remote in, and no matter what they or I did, nothing worked.  We have installed drivers & everything, and my wireless network will not be displayed in the list of available networks.  I have my router sitting 2 feet of the printer & my laptop.  I know it works because I use my wireless laptop at the same time.  We tried to enter the settings manually & automatically & my network will not be displayed.  I use Windows 7 with the Avira software with an active firewall on my home network.   I have tried for a week now and I'm ready to return the printer.  Help, please.  Here are the parameters that you can request.  The only thing I can think is that I asked to be assigned and IP address because I do not know how to get the real.  Thanks in advance

  Manual settings entered: (from my home network properties in Control Panel)

  (the exact name of my network)

  Security type: no authentication (open)

  encryption type: WEP (even if the drop-down list in the printer software makes me choose wep64 or 32

  Security: wep

  security key: (I get)

  key index: 1

  To get it back to where I needed either from me has it taken about 2 months - reinstall all the programs, implemented my toolbars desktop, special etc. It's a chore because I do transcription work and have several versions of Office & I need to do something special for the transplants I don't get this error message because I have more than one version, etc.

  If you can afford it (not very expensive), buy an external USB drive enclosure and a hard drive at least as large as your installed hard drive.  Once you get your system as you wish, create a complete image of the disk and save it to the external hard drive.  Sometimes, if you buy a player and a box together, software disk imaging and cloning is included.  Otherwise, there is some disc perfectly adequate cloning/imaging programs available.

  If you get a large enough external drive, you can use it to make an image of such system which just after getting properly put things in place and make then one or more periodic images to use as backups.

  If you clone rather than image, then you can just swap the current drive for the clone.  It is more useful as a backup in case your installation disc breaks down.  As a general rule, images can be restored from the backup disk or from the software installed on your computer or by using a CD bootable you create using the same backup software.

  I highly recommend you get one of the following options (or any other similar software you can find) and make backups.

  If you have a Western Digital hard drive, you can get a version of Acronis True Image free of WD (http://support.wdc.com/product/downloaddetail.asp?swid=119) or you can get the software of cloning separately (this is not an exhaustive list and in no particular order, some are free, some not):

  Acronis True Image Home
  EASEUS ToDo Backup
  Paragon Drive Copy or Partition Manager Personal
  Casper
  XXClone

  Macrium Reflect free

• NEW HP ENVEY Centrino advance 6230 N will not pick UP 5G WIRELESS ONLY 2 g?

  -Can you ME TELL WHY MY ALL NEW PORTABLE HP ENVEY 17 J141NA WITH Centrino advance N 6230 CARD without WIRE DO RAMASSERA not 5 G 2 G ONLY, YET MY IPHONE AND laptops more FORMER PICK IT UP WITHOUT PROBLEM?

  just had virgin on the phone and they tried to reconfigure the router that didn't work so they logged onto my laptop so even though I spent  a fortune on this laptop if you run a cmd command......... netsh wlan show drivers
  
  if it doesn't say 802.11a it means you have 5 GHz capability. If not then you don't have it.
  
  only 7 days old and paid £900 for high spec laptop and not 5g compatible!!! NOT HAPPY HP!!!!!
  

• Laptop will not connect to the wireless network

  I have a Toshiba laptop with windows Vista, and it does not connect to wireless internet at my father's House. My father and my sister have the same exact computer, and both of their computers work perfectly well. Mine will work with an ethernet cable plugged in, but when I try to connect wirelessly, it does not work. I've never had this problem in my mom's house or anywhere else. Can someone help me please?

  Hello

  This is a security feature of each wireless router I've ever seen, although I wouldn't be surprised to discover that some router didn't do it. You need to check your router admin pages to see if mac address filtering is in effect. Address filtering Mac prohibits access to the router by any unauthorized network device. All network devices have a unique mac address which you can find through opening a command prompt (click Start, then type cmd and press enter) and then typing ipconfig/all. The output refers to your device Wireless 'physical address' (mac address) and will be in the format hh-hh-hh-hh-hh-hh, where hh is a hexadecimal number (A - F and numbers 0-9), dashes are not important and may not be required when you enter your mac address in the router configuration.

  Tricky

• ENVY 4520: printer will not connect to the wireless network

  with wireless on Printer Setup Wizard, printer detects the network but when I enter the key to encryption (correctly), he comes back with a message "Unable to connect to the network".  The printed report suggests the address filtering MAC can be activated.  But I checked and it is specifically DISABLED.    The printed report indicates a FAILURE on "no filtering."

  Please notify.

  After struggling with this for two days and after the announcement of this question and all by downloading the HP doctor, I noticed that the printer had suddenly cured himself. I'm not sure what I should credit this miraculous healing. Thank you I guess?

• Photosmart 5524: Photosmart 5524 will not connect to the wireless network

  I recently moved house, and since the move does not connect the printer to the network.

  The router and the parameters are the same as before the move, and appliances are on opposite sides of the same coin.

  Initially, he sees the network, but does not connect when you press the WPS button or the password.

  After the first attempt he cannot see all networks at all until the settings are reset, even if the network name is entered manually.

  Printed on the test result to get a 'Pass' for YOU wireless and WIRE WORKS, a "failed" to FIND NAME of NETWORK and "Not run" on all other tests. The proposed solution is not useful, as it suggests using the Wireless Setup Wizard to set up the printer, which I already do.

  No other device has problems see the network or connection to it. MAC filtering is not lit. Some devices have a static IP (required to stop Ipad wife being a tyrant of intellectual property), but the router DHCP is still active for most devices.

  Temporarily remove your SSID of your router password. Now try to connect to your SSID unsecured. Are you successful? If so, go back and add WA2 - AES with a password and try again.

• Jet Office Pro 8500 will not be printed via wireless network.

  All of a sudden, my printer does not print anything from any of my devices. Just print items get saved in the queue. The printer is connected to the router, all configuration and test pages that it's good and ready. I have windows 7.

  OMG! I can't believe that the fix was something so simple.   I had installed a new router.  Windows for some reason, creates a virtual printer with a disk of Web Services and the port (which did not work or I do not know how to configure it properly) and removed my printer "hard."  I went just to network, add a printer, it finds the printer hard origin, I added it, deletes it on the virtual ports of WSD, and now everything is new to print properly!

• Windows 7 will not detect THE routers wireless, including mine.

  Windows 7 will not detect THE routers wireless, including mine. I inserted the cd of restoration of the system, and after that he picked up no internet. No, even if I connect it with the wire! Help!

  Hello

  Thank you for contacting Microsoft Community.
  Is properly installed wireless adapter driver?
  Go to start-> type devmgmt.msc-> press on enter. In the Device Manager window, expand network adapters. You should be able to see a list of network adapter as Ethernet, Bluetooth, etc. Make sure that you can find the adapter wireless from the list. If so, double-click it. Properties windows will be open. On the general tab, under device status, if it shows that the device is not functioning properly, please remove the case, locate the wireless network card and make sure the connections of antennas are coneected correctly. If even a connection is not properly connected or damaged, you cannot connect to any WiFi network.
  Response if the issue is not resolved.

• Equium L10 will not start

  Please help - my Equium L10 will not start.

  Power supply is OK. When the power is connected the orange battery light comes on. I press the power button the green power light turns on momentarily (literally a Flash), then both the Green and orange lights out with orange alone returning it on about 2 seconds later.

  Else does nothing - no fan activity, no hard disk, no activity of the screen activity, no other light - you get the picture!

  I tried the following:
  Removed battery and tried to start with AC power not only - no joy
  Removed AC power and I tried booting with battery only - no joy
  Barrette of RAM removed and reinstall - no joy

  Does anyone have ideas before considering a tech? Suggestions (with the exception where to paste!) would be welcome.

  Kind regards

  Gary C

  Hmm .He doesn't sound good. For me, it looks like a motherboard problem. It is maybe something wrong with electronic power to the Board of Directors of s. But not for sure.

  What you can do is to remove the battery and unplug the power adapter for a while.
  Wait about 20 minutes and connect the battery and adapter for the laptop. Then try turning on the laptop computer.
  If this does not help I recommend contact the ASP technician, because I don t think you will be able to know what's exactly wrong.

  So I hope that the technician can find the fault quickly and can solve this problem.

  Good luck