How to configure the COMPUTER strategies on Simulator

Storm of BB JDE 4.7.0

I try to load a .cod from SD card file, save it as a code module and get the descriptors to the application.

I can read the file into a buffer, create the code module and get a handle invalid NULL (what seems). But when I call saveNewModule, I get a returned value of 4, I think it's CMM_MODULE_EXCLUDED.

As a result, my next call to getApplicationDescriptors Gets an exception indicating that the argument is not valid (the handle).

First, the call to saveNewModule returns a 4. The CMM_ state values are defined by a name, but not of value. Where are defined the values?

Second, I suspect that it is because of the policy IT. What should be put in place in the Simulator to work. There are about 100 different things in your name authorization code download. I have no idea what those who must define and this than to ignore. I tried a few different configurations by going right to the bottom of the list, and it did not work. It should be a kind of it political to emulate a fully equipped device up and running.

2 questions here...

1. where are the values of State CMM_ defined by number for debugging purposes.

2. how we set up the it policy in the Simulator to do what I'm trying to do.

Thank you

-Donald

Never mind. It was because I had the wrong County when reading the code file... I was out of one.

I can close this...

D

Tags: BlackBerry Developers

Similar Questions

  • How to configure the computer to place and receive phone calls?

    I get a modem to the PC and would like to know about Computer Configuration to place and receive phone calls.

    Does anyone have any suggestions?

    Thanks in advance for your suggestions :>

    Hello

    You can make and receive calls using Windows 7, since it is compatible with the hardware and software used by most Internet calls services calling.

    You can use Skype or any other third-party application to make and receive calls on the network. You can also consult the help link and check if it helps.

    Make a phone call over the Internet (VoIP)

    http://Windows.Microsoft.com/en-CA/Windows-Vista/make-a-phone-call-over-the-Internet-VoIP

    (This article also applies to Windows 7)

    Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

    Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

  • How to configure the computer to connect to a specific pool in sight

    I'm trying to find out how to get some machines to automatically connect to a specific pool, I created. What would be the best way to do this?

    Thanks for any help!

    There are settings of command line for the client to display which allows you to specify the pool and desktop computers, you should connect to.

    Use of VMware View Client command-line build-233023 4.0.1:

    desktopName - Office of XXX for autostart

    domain name - domain XXX for server connection

    -folder XXX file with the additional command line parameters

    (If available) XXX - languageId to use language ID

    -non-interactive message boxes of repress to start fully scripted error

    -password XXX for server connection

    desktopProtocol - XXX try using the specified protocol desktop display

    desktopLayout - Office XXX screen size specify (for example, fullscreen, multimonit

    or, windowLarge or windowSmall)

    -XXX URL serverURL to the view connection server

    logInAsCurrentUser - XXX connect you as an existing user

    user name - XXX user name for the server connection

    -rollback cancels a check out (required - desktopName)

    -Check box on the desktop for use in offline mode (required - desktopName)

    )

    -checkin Check in the office (need - desktopName, must be verified

    out)

    staycheckedout - stay checked after check-in (required - desktopName)

    offlineDirectory - path Local to check Office (required - desktopName)

    -?                      Display this help

    Option names are case sensitive.

    If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

  • How to get the computer out of safe mode of power

    How to get the computer out of safe mode of power

    Hello jeffg56,

    I understand that you want to leave safe mode, follow the steps below:

    Exit Safe Mode:

    1. Click Start, type msconfig in the search field and press ENTER to open the System Configuration window.

    2. On the general tab of the System Configuration window, select Normal startup, and then click OK.

    I hope this has been helpful, please let me know if you need more help.

    Thank you

  • no configuration administrator when configuring the computer

    laptop HP envy using windows8

    I do not set up the administrator when configuring the computer. How can I configure an administrator now?

    By default, the first account created during the setup of the PC is the "Administrator" account  Windows, to the best of my knowledge, will allow not a standard user account must be created before an administrator account.  Press the Windows key + X and select Control Panel.  Select user accounts and verify that it is an admin account or not.  If this is not the case, click on change the type of account and it should give the opportunity.  There must be at least one administrator in Windows 8, so this should be an admin account, provided that it is the only one.

    You receive a prompt in a program he needs administrator privileges?  What made enter you the account isn't an admin account?  Some older programs may not recognize it as an administrator account.

  • How to configure the settings of mail on HP Laserjet Enterprise 500 color MFP M575 printer/scanner?

    How to configure the settings of mail on HP Laserjet Enterprise 500 color MFP M575 printer/scanner?  The Office has 5 staff members each with ending with [email protected] for example e-mail addresses.  We have also created an email for option analysis as [email protected] (not sure if creating an e-mail address for the scan option is required).  We are not part of any domain, and there is no server in the office.  When you try to configure the email on the printer/scanner control panel it asks the host name.

    What host name that I can use?

    If you try to configure the browser by using the IP address of the printer, he asks as the SMTP server. The MS Outlook 2010 all our emails use mail.junior - albania.org incoming mail server and outgoing.  Other settings in MS Outlook 2010 are box My outgoing server (SMTP) requires authentication checked and use the same settings as my mail server entering selected.  On the Advanced tab: incoming server (Pop3): 110 (SSL encryption is not checked) and outgoing (SMTP) server: 465 use the type of encrypted connection (SSL) following.

    What server SMTP should I use in this case?

    I would appreciate your help in the configuration of the HP printer/Scanner for scanning and sending by electronic mail to the members of the office staff email addresses.

    Thank you...

    I'll link you to the product page with several documents which I hope will help you to configure your e-mail settings. Please look through them and see which ones fit your needs:

    Scan and send (e-mail, send to folder, digital sending, etc..)

    Here is another site that has some videos that will guide you through the entire upward (here I would try everything first )

    Simulations of MFP - digital send

    If these don't work, please let me know and I will continue to search it for you.

  • How to configure the bluetooth with Kyocera android phone connection to share photos, music & video files

    Original title: Windows 8 Configuration bluetooth with Kyocera android phone?

    Configuration of bluetooth of Windows 8 with Kyocera android phone?  I got a laptop with bluetooth Tech. How can I set up a connection and share photos, music & video files?

    Hey GQ - Jon'Jon,.

    Make sure that Bluetooth is enabled on the computer as well as your Kyocera android phone.

    Make sure that the phone is paired with your computer.

    For information about how to configure the Bluetooth with Kyocera android phone connection to share photos, music & video files, it would be better if get you in touch with Kyocera phone support for assistance. Please see the support link:

    http://www.Kyocera-Wireless.com/support/phone/

    Please feel free to respond if you face problems with Windows in the future.

  • How to configure the CD driver on the host for a virtual machine?

    After you create a virture machine and put the CD of driver on host, when powered on the vertual machine, may not start the drive form the CD only from NIC.

    How to configure the CD driver on the host for a virtual machine?

    Right-click on the virtual computer and go to edit settings. Click the Options tab and under the tip list, there should be Boot Options. Enter an amount of milliseconds to wait before your boot, so you can activate the CD-ROM. You can also activate the CD even if it boots to the NETWORK card option, and then reset the virtual machine. Get the focus of this virtual machine on the console session, and then press ctrl-alt-insert. Your CD-ROM will stay connected if you do not want to delay the startup process.

  • How and when the computer turns off automatically?

    Listen to internet radio, Sys Pref > saving energy on the default setting, wake up and radio program cut.

    This is great... .buth how and when the computer turns off?  When I reopen it wifi comes back, I'm correct when she stops she also turns off wifi?

    Hello allan299,

    Thank you for using communities of Apple Support.

    According to your post, I see that you have any questions on how and when your computer shuts down, and how the WiFi on your Mac is affected. I know it's nice to be able to properly manage what happens when your computer stops and starts in mode 'sleep'. I'm happy to help you find the best resolution.

    You're right, when your computer stops completely it will turn the Wi - Fi. If you enable the wake for network access, Wi - Fi remains lit, and you can access shared resources on your computer, such as printers or iTunes shared playlists even when your computer is in "sleep". Definition of a calendar closing and start on your Mac can also be useful.

    Check out the following resources that will help the set options that control the energy use of your computer, sleep, and wake-up times for your Mac and the calendar from your Mac to turn on or turn off or go to sleep:

    OS X Yosemite: energy saver Preferences

    OS X Yosemite: set sleep and wake up on time for your Mac

    OS X Yosemite: A schedule for your Mac to turn on or turn off or go to sleep

    Best regards.

  • How to configure the LDAP connector in windows server 2012 R2 Active Directory?

    How to configure the LDAP connector in windows server 2012 R2 Active Directory?

    Hello

    Please post your question in Server TechNet Forums.

    http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

    See you soon.

  • I want to know how to restore the computer to its factory settings, when I bought from a private party and have an administrators access code

    I want to know how to restore the computer to its factory settings, when I bought from a private party and have an administrators access code

    Hello

    What is the brand and model of the computer?

    The best method is to contact the computer manufacturer for help on how to set the computer to its factory settings.

    Hope this information helps.

  • Can someone give an example of how to configure the subnet mask associated with the network and host of an IP address part?

    Can someone give an example of how to configure the subnet mask associated with the network and host of an IP address part?

    Hi stuckfree,

    The question you posted would be more appropriate on the TechNet Forums. I would recommend posting your request here.

    http://social.technet.Microsoft.com/forums/en/itproxpsp/threads

  • How to configure the router Linksys DD - WRT for WVC54GCA E4200

    I don't know how to configure the router Linksys DD - WRT for WVC54GCA E4200. DD - WRT is very complcated. Help, please! Also, I used the TZO.com to the DDNS. Can I set up the DDNS for DD - WRT router? I used the DDNS to my old model router before. Thank you.

    I followed the TZO supporter last night. I can watch my WVC54GCA outside. All solution links:

    http://tzodns.com/support/tutorials/188

    http://tzodns.com/support/tutorials/190

    Hi Majekho,

    Your domain name has decided to 99.245.xx.x. If you go to www.test.tzo.com from the location of the host, you must see this IP address. If these numbers are the same, then all with TZO works correctly. I guess that it is a simple problem with ports (80, 1024) is not open in the router and forwarded to the right internal IP address of the device (for example. 192.168.1.xxx).

    In addition, if you have a DSL, you will need to call your ISP and ask them to show you how to put your modem in "bridge mode". This will disable the firewall in the modem that blocks incoming connections even if you open ports in your router.
    In addition, during the test, it is best to test on your device remotely, this is due to a common problem called loopback with most routers. For more information about looping, take a look at:

    http://helpdesk.TZO.com/cgi-bin/KB.cgi?view=140

  • my windows pc very experience 1, I am embarressed to admit that I can not understand how to configure the windows/outlook e-mail system. This pop and smtp or what ever Q was, I still can't understand.

    I'm unable to set up Outlook, or now called windows mail, I think. but for the life of me I do not understand how to configure the e-mail program that comes with now it windows Vista 64 that came on my new pc.  can someone please?  Thank you

    Windows Mail is/was not Outlook.

    Windows XP e-mail program called Outlook Express.

    Outlook is a part of the office.

    Windows Mail in Vista is the replacement of e-mail for Outlook Express (XP) program.

    Read this section on how to set up Windows Mail in Vista:

    http://www.SimpleHelp.NET/2007/02/07/a-beginners-guide-to-setting-up-Windows-Mail/

    Link above has an easy to follow Guide to set up Windows Mail.

    Contact your ISP (Internet Service Provider).

    They offer your broad band/Dial-up connection.

    Ask them to:

    username
    password for your service account to wide band/Dial-Up with them

    Server of incoming POP3 mail
    outgoing mail SMTP server

    The above information is required to set up Windows Mail.

    ISPS are usually happy to help you set up your email account.

    See you soon.

    Mick Murphy - Microsoft partner

  • My IP security camera is different my network ip address, how to configure the camera to match the ip address with the router cable time Wörner

    Please someone help me configure my camera IPsecurity model m12 mobotix ag. It allows to work in the corporate network, but they close down and I didn't bring the camera House but there different IP address of my network and I don't know how to configure the camera to have the same IP address with my home router to TWC, thanks

    Router connections by opening network, in the Panel control, search for the router / properties, enter its configuration

    data in the boxes provided, you will get on the router, a sticker shows data. If lost or deleted, go to its Web

    for the data. Also, perhaps the home page of IP camera offers software/drivers.

Maybe you are looking for

  • How to clear all the tiles in a new tab?

    I don't check the thumbanils in a new tab for a long time, and now there are a lot of these in my history, my question how I clear without clicking on the X mark yet another on all the world?

  • How can I go directly to a website previously displayed.

    Windows IE has a drop-down arrow next to the button front and back allows you to directly access a site previously displayed. I don't see this feature on firefox. How can I go directly to a familiar site? I don't know the history. I want to talk abou

  • The Web site will not play its asf

    By visiting the web site, sognoromance.com/ladyinred.htm, pages do not play sound in ASF or WMA format.They do it with IE.I installed the plugin, tested and turned off everything to nothing does not. Is there a way to be able to hear the sound? Thank

  • ModusLink free upgrade Vista - order confirmed - we have hope

    I hope that my free upgrade to Vista can be delivered. After having crossed the Moduslink procedure and received the "error unrecoverablt" and then "we cannot validate your COA number", I, like many others, been at a loss what to do then (in the abse

  • UPD PCL 5 ver5.0.3.37

    I have the universal driver UPD PCL 5 ver5.0.3.37 installed on a laptop with windows XP SP3. I did not have the administrator rights on this computer so I can't install a new driver. Can you tell me printer color witch model will work with my driver