no configuration administrator when configuring the computer

Similar Questions

• our administrator user on the computer just connect.

  our administrator user on the computer just connect.
  whenever I click on it (it does not require a password) it tells me I can't log on because the user didn't load, I know not what to do or how to fix it...
  Please help me :(

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not solve it read more

  read the tutorial below

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• Cursor freezes and the keyboard does not not when starting the computer.

  Original title: I can not move the cursor. Why

  After I log on the computer, the cursor is frozen and the keyboard is idle.

  Hi Ron,

  -Were there any changes made to the computer before the show?

  I would suggest trying the following steps and check.

  Method 1:

  Step 1: Start the computer in safe mode and check.

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  If the problem does not still in safe mode, then put the computer in a clean boot state and check.

  Step 2: Configure the computer clean boot.

  To help resolve the error message, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Please note: After troubleshooting, be sure to start your computer in normal mode by following step 7.

  Method 2: Run a virus scan to ensure that your computer is virus-free.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Security Scanner warning: there will be data loss through an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Let us know the results.

• What happens when "Still waiting for network when starting the computer and logon" is enabled and that the computer is not connected to the network?

  In MMC, I created the group policy and found through web search that computers with mapped network drives can connect better if "always wait for network when starting the computer and logon" is enabled...  So far, it has been very nice to have allowed.  Is no longer mapped network drives see the place as disconnected.  But what happens if the computer is not connected to a network?  Say the wireless router will turn off and your computer always 'wait... '. "turned on, should the user could still log the computer timely?

  Check these:
  Troubleshooting intermittent slow connection or slow start of http://blogs.technet.com/b/instan/archive/2008/04/17/troubleshooting-the-intermittent-slow-logon-or-slow-startup.aspx
  Priority and group policy processing
  http://TechNet.Microsoft.com/en-us/library/cc785665%28WS.10%29.aspx

• When start the computer can be turned on but nothing happens

  Original title: computer does not start

  Hi all

  Have a dual processor Intel running Vista with 2 GB of memory.

  When start the computer can be turned on but nothing happens. That is the screen is not lighting, brief flashes KB on and nothing. I hae take the drive HARD case and implemented it is powered, but there is no sign that it is accessed at all when the machine is running. It seems that ot could be the HARD drive, but I think that there is a rom on the motherboard, which is accessible in the boot process and I wonder if this could fail. I don't have a spare drive to test what happens then is anyway I can be sure if I need new hard drive or m/Board?

  While on the question - if I need a HARD drive, Vista is the one that crashed and I do not have a Cd with the machine when I bought it. Nor has created a cover of one! I have an old XP Pro upgrade disc and an original copy of Windows 2000 (so I can switch to XP). This is my best option? I can't afford £ 140 for Windows 7.

  Hi Eddie,.

  Since this is a hardware problem, you should contact your computer manufacturer or a hardware technician to understand the defective material.

  And also, since Windows Vista was preinstalled on the computer you must consult the manufacturer of the computer for resettlement or a recovery DVD.  Also survey about data recovery on hard drive crashed.

• How to configure the COMPUTER strategies on Simulator

  Storm of BB JDE 4.7.0

  I try to load a .cod from SD card file, save it as a code module and get the descriptors to the application.

  I can read the file into a buffer, create the code module and get a handle invalid NULL (what seems). But when I call saveNewModule, I get a returned value of 4, I think it's CMM_MODULE_EXCLUDED.

  As a result, my next call to getApplicationDescriptors Gets an exception indicating that the argument is not valid (the handle).

  First, the call to saveNewModule returns a 4. The CMM_ state values are defined by a name, but not of value. Where are defined the values?

  Second, I suspect that it is because of the policy IT. What should be put in place in the Simulator to work. There are about 100 different things in your name authorization code download. I have no idea what those who must define and this than to ignore. I tried a few different configurations by going right to the bottom of the list, and it did not work. It should be a kind of it political to emulate a fully equipped device up and running.

  2 questions here...

  1. where are the values of State CMM_ defined by number for debugging purposes.

  2. how we set up the it policy in the Simulator to do what I'm trying to do.

  Thank you

  -Donald

  Never mind. It was because I had the wrong County when reading the code file... I was out of one.

  I can close this...

  D

• MS Visual C ++ Runtime Library Runtime C/Program files/real/Real Player / Real Play.exe R6035 - cell function pure virtual error when starting the computer

  Original title:

  When the computer starts, this message to MS Visual C ++ Runtime Library C/program files/real/Real Player / Real pure R6035 - virtual function cell Play.exe

  Hello

  1 how long have you been faced with this problem?
  2 have you made changes on the computer before this problem?

  I suggest you perform the clean boot on the computer.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  1. click on Startand then click run.
  2. type msconfigand click OK.

  The System Configuration Utility dialog box appears.

  3. click on the general tab, click Normal startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

• Bluescreen when starting the computer

  The blue screen recently pop up on my computer trying to put in safe mode, but the blue screen always appears with the same erro message that says a problem has been detected and windows has shut down to prevent damage...

  Hi Ashleyy99,

  1. did you of recent changes on the computer?

  2. When you get the blue screen of death on the computer?

  3. What is the full error message and the error code you receive on the blue screen of death?

  Method 1

  I suggest that you try to start in last good known Configuration and check if it helps.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Method 2

  If the previous step fails, you will need to perform the installation of repair of Windows XP.

  Perform a repair Installation

  http://www.Microsoft.com/windowsxp/using/helpandsupport/learnmore/tips/doug92.mspx

• Get message BSIZE_CDB_Software is deleted from my computer when starting the computer

  Tuitel original: BSIZE_CDB

  When I restart my computer, I get the message that bsize_cdb_software is deleted from my computer.

  Hello

  1. did you do changes on the computer before the show?

  2 is the exact error message?

  3 are you using an HP computer or is any HP device attached to the computer?

  Method 1: Clean boot

  I suggest that you put the computer in a clean boot and check the cause.

  When the computer starts to boot, programs non-Microsoft will not be started and would avoid any interruption of their share.

  Check out the link:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.microsoft.com/kb/929135.

  Note: once you are done with the boot, follow step 7 article to set your computer to normal startup.

  Note: If in case you are connected through a wireless connection and then when you start the System Configuration utility to perform the clean boot, click Startup and Services tab one time and check see topic wireless are turned on (Enabled).

  Method 2:

  Uninstalling and reinstalling all HP drivers\software and check if the problem persists.

  To uninstall the drivers:

  a. Click Start, type devmgmt.msc and press enter

  b. now right click on the device and select uninstall.

  To uninstall all HP software, please visit this link. Reinstall the same website here.

• Get the Blue error screen when starting the computer XP, stop: 0X0000007B % 20(0XF789E524,0XC0000034,0X00000000,0X00000000)

  I get the same code at startup until you mean?    Stop: 0x0000007B % 20(0XF789E524,0XC0000034,0X00000000,0X00000000)

  0x7B bug check code
  http://msdn.Microsoft.com/en-us/library/ff559218 (v = VS. 85) .aspx

  The boots are sometimes successful and sometimes not?

  If you you do not want to lose any data, make sure you take a backup on removable media before trying to solve the problem.

  Select Start, run, type cmd and press ENTER. Type "chkdsk c: /f /r" without the quotes and press ENTER. Make sure you include the spaces indicated. Enter Y when asked if you want to run chkdsk on restart the computer. Quit and then restart the computer.

  Marking bad sectors on a hard disk takes time so be patient. Delimiting does not repair a defective sector. He places pointers to the reader by saying the system not to read or write to these areas that have been damaged.

  If the number of defective sectors continued to increase after using the procedure above several times, then you should replace the disk. If an important system file is written to a bad sector, you can corrupt the registry hives and lose the entire contents of the disc.

  However if have run chkdsk you not see more new bad sectors, then the reader can work for you for years.

  What is your computer brand and model? You have a Windows XP CD? It's a detail. Generic OEM or OEM brand copy. Suppliers of computers brand often give users a copy of Windows to a recovery partition. That applies to you?

  Take a look in the system log in the errors and warnings event viewer and post here the copies. Do not post on more than 48 hours ago.

  You can access event viewer by selecting Start, Control Panel, administrative tools, and Event Viewer. When searching for the meaning of the error, information about the event ID, Source and Description are important.

  A tip for posting copies of error reports! Run Event Viewer and double-click the error you want to copy. You will see a button resembling two pages. Click on the button and close Event Viewer. This places a copy of the report to your Clipboard. Paste it into the body of your message. Make sure that it is the first dough right out of the event viewer.

• I deleted my administrator account on the computer by accident, what should I do? Help

  I changed my account settings and recently my brother made an account and it slowed our computer so I deleted it but I didn't know what a computer administrator account. I recently downloaded a file that I realized that I is no longer necessary when I tried to remove it, it says that I must be an administrator on the computer I have almost tried everything and now I can't change no matter what program or delete and programs because I'm a limited account HELP! WHAT I DO PS I'm not a tech geek so I need simple instructions please D:

  boot in safe mode and run a system restore point, using a prior restore point the problem occurred.

• Error message when starting the computer in normal mode: btdna.exe

  I get this error during start-up:

  WSA startup failed or if you have the wrong version of the installed Winsock.

  I tried the command prompt, run as an administrator and reset but it not taken care of the problem.  Help, please!

  Hi Amy Shane,.

  Welcome to the Windows Vista answers Forum!

  You can check the following link and analysis online on your computer to verify if your computer is infected with a virus.

  http://OneCare.live.com/site/en-us/default.html

  Step 2: Manually remove BitTorrent from the PC

  1 open the Task Manager by pressing the Ctrl + Alt + Del or Ctrl + Shift + Esc key combination.

  2. go to the processtab.

  3. search btdna.exe and right-click on it.

  4. Select end process.

  5. click Yes when the warning sign is displayed.

  6. close Task Manager.

  7 Click Start then start search

  8. enter C:\Program Files\DNA\btdna.exe / UNINSTALL.

  9. use the search function for all other instances of btdna and also remove them.

  If you are prompted to restart the computer, then restart and reinstall the btdna.exe.

  Hope this information is useful.

  Jeremy K

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• How to deepen the administrator rights on the computer?

  Original title: a little URGENT please - Windows 8 lost administrator rights

  Here's the question.

  I have an Asus all in one type of windows desktop PC 8. I improved this standard to professional.
  There is a local user account, who somehow lost administration rights. This is obviously a problem, because I can not access several functions of the computer, including a critical application of the work.
  There is no other user accounts on the pc to connect to the standard administrator account that I suppose is disable by default? As I don't see it.
  After some googling, I tried a few methods to solve this, nothing helps. It seems im in a catch 22, as to solve the problem of having admin rights, I need to have administrator rights to perform the majority of bugs!
  Tried to start the safe mode, to re - activate administrator privileges by pressing F8 or SHIFT F8
  -no effect - pc just started normally
  Tried to activate the account administrator "cmd".
  -This must be done by run cmd as administrator, which I'm not currently!
  Tried to add mode without fail to the startup list
  -Need to be administrator to do!
  I don't see any method to restore or recover to previous point
  Impossible to reinstall windows as it came pre-installed with windows. I was about to add the computer to a domain so that I could make a clean image before this problem occurred
  Uh, I forgot what I tried now. pulling my hair out over this. Seems nothing more I need to do, I have access to an administrator account to run needs. If I could get in safe mode somehow that seems like it would allow me to solve this problem, but I can't get into that any means.
  Help, please! It is a working pc and the only app that gets used, requires administrator privileges to run. If his critics I solve this problem
  Thank you!
  Hi, I know I'm a little late to the party, but I found this post faced a similar problem and thought that post my findings.
  I found a work around for this problem, which does not require a reinstall of Windows, but you may lose your user account.
  Summary:
  The problem is that in Windows 8, the administrator is inactive by default, you will have to find a way to activate it. You can activate the admin as an admin account, however. Fortunately, (on my machine anyway) it seems that you can access your hidden from the Safemode administrator account. If your first set of objectives will be as follows:
  -starting in safe mode
  -Log in as an administrator
  -l' administrator, enable the account administrator similarly.
  -Restart your machine and you as an administrator outside of safe mode (normal mode).
  From here, you should be free to do what you want. Now that the admin account is active, you are allowed to type a password when prompted (by default that the password is empty). For me, however, when I tried to promote my previous user administrator account (among other things) I noticed symptoms that seem to indicate that the account ceased to exist. I went through measures to set up a new account and get it synced with my microsoft email account.
  -Create a new user account
  -give administrator rights
  -remove my old (for some reason, hidden) account
  -Sync to the top of my new user account with microsoft e-mail account.
  Directions for use:
  How to get admin access:
  (1.) start in safe mode. You can make it easier by opening a command prompt (Start menu-> type "cmd"). And type "shutdown/r/o".
  2.), your computer begins to restart, but give you a set of troubleshooting options. Choose troubleshooting->-> start of the Advanced Options settings.
  3.) after reboot and enter safe mode, users of contactor by going to the start menu-> click on your user name-> and choose administrator.
  4.) Windows will begin the first initialization for this account.
  5.) once connected, open the command prompt, this time as a Director. (Make a right click-> Run as administrator).
  6.) type "net user administrator / Active: Yes" to set the admin account as 'active'. It will now be shown outside of safe mode.
  7.) restart your computer and log in as administrator again. You can now add users and to play with the permissions etc. (metro options are not available in safe mode, where the reset).
  How to remove your old account of 'lost' and synchronize your new account with the microsoft account.
  1.) create a new account via the control panel users. Don't forget to give you administrator rights.
  (2.) to remove your lost old account by typing "net use /del" in an administrator command prompt. You need to know your old account name, good luck with this one.
  3.) go into the settings of your pc: open the context menu on the right-> settings-> "change PC settings."
  (4.) to go to the users-> Select 'switch to a Microsoft account» tab
  I hope this helps!

• When do the computer it says Windows no disk, Exception processing message and then gives the number.

  When I connect to my computer, I get this box and it says ' windows no disk, exception processing message c0000013 parameters 75b6bf7c 4 75b6bf7c 75b6bf7c "downstairs if said"try to cancel still continue"I have cancel us or X out of the box, but you have to do 10 to 20 times to go down.  So when you go on the internet, it did the same thing.  I want to know what it means and how to get rid of.  Help, please.

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Start the computer in safe mode and check if the same problem occurs:
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Method 2:
  Try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/310353

  NOTE: When you are finished troubleshooting, make sure that put you the computer in start mode normal as suggested article above.

  It will be useful.

• Having problems with administrative privileges on the computer

  I have that a single user account on my pc and the system will not allow me to delete progs b/c I'm not the admin. ????? Help! What's wrong?

  Hello

  1. you are the administrator of the computer?

  2. you access standard account or administrator?

  I suggest to you that you cannot use the standard user account to change or remove programs that you need administrator rights to run.