How to configure the mode of kiosh for thin clients on windows server 2008

Similar Questions

• How the mirror system and boot partition (RAID1) in Windows Server 2008 and SATA disks

  looking to make a Windows Server 2008 to a desktop computer that meets all the requirements of Server 2008.

  I have 2 hard drives SATA 2 to identical installed. No RAID controller.

  Is this possible?

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads

• What "unmapped user access" for NFS share in Windows Server 2008 R2?

  In the beginning, I followed this Youtube video to set up an NFS share in Windows Server 2008 R2:

  https://www.YouTube.com/watch?v=BQ8Q_vsiksg

  Please note that the default option to allow to access Unix unmapped user is not changed (to about 1 min 57 sec).

  Then I found another article at http://www.vmwarearena.com/2012/07/create-nfs-datastore-for-esx-in-windows.html

  But in this article, I like to select allow anonymous access (instead of allow access Unix unmapped user).

  So who is correct?  Or both are correct (which means that this 'unmapped user access' is not serious)?

  And why should we have to allow root access (in the NFS share permissions dialog box)?  What a security risk?

  Thanks in advance.

  Have you tried to run through the steps taken from the blog of VMware?

  How to enable NFS on Windows 2008 and currently at ESX | Insider - Articles from VMware VMware support

  Also, there are 3 KB articles to know in case of potential problems

  1. http://kb.vmware.com/kb/1004490

  2. http://kb.vmware.com/kb/1003967

  3. http://technet.microsoft.com/en-us/library/cc753302 (WS.10) .aspx

  Noting in particular this section

  Share the folder of Windows for NFS

  To share the folder of Windows for NFS:

  1. Right click on the local folder you want to share via NFS.
  2. Click NFS share.
  3. Type the name for the share. For example, NFS-VMFS01.
  4. Delete to allow anonymous access.
  5. Click on permissions.
  6. Change the type of access in reading + writing and select allow root Access.

• Able to access the folders but no shared drives on a Windows Server 2008 (C$, D$ etc.)

  I can access shared folders from a Windows Server 2008, but I am not able to access the shared drives (C$, D$). After entering my credentials, the system guard invites me for my credentials again and again. Any idea what can cause this?

  Appreciate the help

  Thanks.l

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the Windows Server Forums on TechNet. Please post your question in the Windows Server Forums.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Unable to see the Favorites menu when opening my computer in Windows server 2008 R2

  Original title: Favorites Menu

  Hello

  I'm not able to see the Favorites menu when I open my computer in Windows server 2008 R2.

  In Windows server 2003, I used to see the Favorites, I saved in Internet Explorer.

  Help, please.

  Hi Rochdi_carlos,

  Because the question you posted is related to the Favorites menu in Windows server 2008 R2, it would be better suited in the Technet forum. Please post your question in the following TechNet forum to get help:

  http://social.technet.Microsoft.com/forums/en/category/InternetExplorer

• How to configure the outgoing mail SMTP for Outlook Express 2003 receive service internet ulitizing comcast email?

  My ISP is Comcast.  I use Outlook Express 2003.  Comcast has to change mail outgoing SMTP from 465 to 587, when I could no longer send emails.  I can receive emails, but when I send a mail, Outlook Express says that the email has not been sent (but there are sent) and does not record the email in my sent folder.  I now get 2 copies of every email sent to me.  Help.

  Not surprisingly, Comcast tech told you wrong.
   
   
  Configure Outlook Express for email XFINITY/Comcast
  http://customer.Comcast.com/help-and-support/Internet/configure-Outlook-Express-Xfinity-Internet/
   
   
  Don't forget to set up exactly. Some boxes to check, some do not.
   
   
   
   
   

• How to configure the keyboard shortcuts App for submenu items?

  Hi-

  I'm trying to define keyboard shortcuts for Pro Tools. I am facing a problem, however. I want to put a shortcut for the menu item

  View-> view-> Inserts A-E Edit window

  in the keyboard preferences window, so I've created a shortcut to the App to «inserts A - E» The problem is that there are other elements of submenu in Pro Tools with the same name, for example

  View-> Mix window views-> Inserts A-E

  Track-> Bypass inserts-> Inserts A - E

  and it is the latter who eventually be triggered by the shortcut. In fact the shortcut appears in the three places during the navigation in the menus; but it only triggers the item "bypass".

  In the keyboard preferences pane, is it possible to specify which menu a submenu item resides in?

  I'm on El Capitan 10.11.2, ProTools 11.3.1.

  Thanks in advance

  ~ peter in istanbul

  It is not possible that you are trying. Shortcuts can handle only a single menu command name. The command being the last point. Other menus of the parent are not considered.

• How to determine the mode of RDM for requirment

  Hello

  I have following questions about RDM physical and virtual mode.

  1 if the requirment ask the applications that support the san to be used inside the virtual machine, which means that we must set the virtual disk as physical mode, can't set as virtual, right?  If so, this means that the virtual machine can be copied or instant and covert to the model, right?

  2. If the virtual mode, which means that the virtual machine can only access the storage space, but can not use san value-related software. is that correct?

  When RDM in virtual mode, not just san applications that support but also has esx as snapshot can be used

  Binoche, VMware VCP, Cisco CCNA

• How to configure the user name & psw for VPN connection in WRT54G?

  Hi all:

  I would like to enable VPn in WRT54G.

  Cann't find where to set up the username & psw.

  Could someone help?

  Client is necessary to set up the username & psw if he did not need to put in place the username & psw to WRT54G?

  Thank you in advance

  Chen min

  It doesn't have a VPN service. It doesn't have a VPN server. You make a connection to the VPN client to the WRT54G.

• How to add the directory to classpath for WL 10.3-managed server?

  Hello
  
  For our .war, we have a handful of .properties files that are not in the war. The idea was to be able to edit a properties file, as needed and redeploy the application to pick up a few ownership changes. We do this in WebLogic by modifying the startWebLogic.sh startup script and tacking on the file system path to the classpath assignment. This works very well when we deploy the .war on the Server Admin, but we found that target on some servers managed (on the same physical host) does not pick up the properties.
  
  Is there a similar process required for managed servers, i.e. to change the classpath?
  
  We are new to WebLogic, so perhaps I missed something basic, but I have not been able to google anything. I'd be happy to hear any opinions on the best ways to do so, as well...
  
  Thank you
  Sanfo

  If you use the NodeManager to start managed servers, you can specify the path to the server startup in the 'Classpath' field in the 'Start Server' field. Note that everything you put into this value, you will need end tod the value with '$CLASSPATH', which will contain the classpath implicit WebLogic itself needs.

  Note also that you could engineer even not require redeployment when you change your properties of your application files. For example, the Log4J properties (or descriptor XML) file is loaded automatically whenever it is changed, even after the deployment. the Log4J infrastructure puts an "Observer" on it to recharge when changed.

• Regarding the "Configuration files editor" in BB Pro 5.01 on Windows Server 2008 Server

  (WARNING: Im a noob)

  Hello

  I read on the help page (http://quest.bb4.com/bb/help/help/Configuration_Files_Editor.htm) that I need to create the file etc/editcode with an authentication code to enable this feature.

  So far, I am still unable to change the configuration from the web gui files... It is supposed to be a specific file type, or do you need to give these codes?

  PS: We are running BB Server 4.60 on the server that is powered on, but Im test new features on 5.01 on a test server. This feature is available without a real license file?

  Thank you!

  I tried once more following this guide ( https://support.quest.com/SolutionDetail.aspx?id=SOL59756 ) and now it works!

• How to get the VM with or without thin disk in VC Server

  I need to get my Vm list all in my server VC who have the fine disc and one of them is not a thin disk.

  I do not understand it can be done in CLI power and I have Vmware Vsphere CLI installed power. I also find some scripts on the net, but I don't know how to use them

  Please suggest step by step how to run these scripts and where console as well?

  Thank you

  Deepak

  If you have the names of these servers in a CSV file with this provision.

  Name
  server1
  server2
  ....
  

  You can use a script like this

  $report = @()
  Import-Csv "C:\My-Csv-file.csv" | %{
       $vm = Get-VM $_.Name
       $vm | Get-HardDisk | %{
            $row = "" | Select VMname, Folder, HDname, HDformat
            $row.VMname = $vm.Name
            $row.Folder = (Get-View $vm.FolderId).Name
            $row.HDname = $_.Name
            $row.HDformat = $_.StorageFormat
            $report += $row
       }
  }
  $report | Export-Csv "C:\VM-disk.csv" -NoTypeInformation -UseCulture
  

  ____________

  Blog: LucD notes

  Twitter: lucd22

• What is the hardware configuration recommended for 11 G R2 on Windows Server 2008 R2 64 bit

  We are about to move from 10 G to 11 G R2 R2. The platform provider supported for our application is Windows server 2008 R2 64-bit. I have to write a specification document to support my request for new material and I would like some guidance as to the recommended configuration. Environment development database server will have to host dev, test, and preliminary databases for a database of 10 GB. The production server will host only the production database.

  Any guidance appreciated.

  concerning

  Madre

  Hello

  It's all sorted out.

  concerning

  Madre

• How to configure the listener with SSL

  Hi Experts,

  I use 11g R2 EE. I want to configure my database listener so that it can be connected using SSL.

  Can someone provide me guide step by step to configure the listener with SSL (including the portfolio so that comes in the image).

  The command line configurations will be well appreciated.

  Thanks in advance

  Alexander gelin

  The client configuration is the same as the server:

  1. create the portfolio.

  2 creating CSR and copy it in CA.

  3. the CSR signal with your certificate root.

  4 copy signed CRT file and root of public certificate to the client.

  5 configure the sqlnet.ora clients.

  Heavy customers already contains the necessary files. For thin clients, it is necessary to install the full or instant client.

  In SQLDeveloper, connection string should be like:

  jdbc:oracle:oci:@(DESCRIPTION= (ADDRESS_LIST= (ADDRESS= (PROTOCOL=TCPS)(HOST=)(PORT=))) (CONNECT_DATA= (SERVICE_NAME=)) (SECURITY= (MY_WALLET_DIRECTORY=D:\Oracle\client.test.p12)))

• How to install the ssl certificate in windows server 2008?

  Hello

  Can someone give me the steps to install the SSL certificate on my application hosted on windows server 2008 R2?

  Hello

  Although technet.microsoft.com should be the best forum for the problems of server below is a guide on how to install an SSL certificate.

  It will be useful.

  To install your newly acquired in IIS 7 SSL certificate, first copy the file somewhere on the server and then follow these instructions:

  1. Click on the start menu, go to administrativetools and click on Manager of Services Internet (IIS).
  2. Click the server name in the links on the left column. Double-click server certificates.

     

  3. In the Actions column to the right, click Complète Certificate Request...

     

  4. Click on the button with the three points, and then select the server certificate that you received from the certificate authority. If the certificate does not have a .cer file extension, select this option to display all types. Enter a friendly name that you can keep track of certificate on this server. Click OK.

     

  5. If successful, you will see your newly installed in the list certificate. If you receive an error indicating that the request or the private key is not found, make sure that you use the correct certificate and you install it on the same server that you generated the CSR on. If you are sure these two things, you just create a new certificate and reissue or replace the certificate. If you have problems with this, contact your certification authority.

     

  Bind the certificate to a Web site

  1. In the column of links on the left, expand the sites folder, and click the Web site that you want to bind the certificate to click links... in the right column.

     

  2. Click the Add... button.

     

  3. Change the Type to https , and then select the SSL certificate that you just installed. Click OK.

     

  4. You will now see the listed link for port 443. Click close.

     

  Install all the intermediate certificates

  Most of the SSL providers issue certificates of server out of an intermediate certificate so you will need to install the intermediate certificate on the server as well or your visitors will receive a certificate error not approved. You can install each intermediate certificate (sometimes there are more than one) by following these instructions:

  1. Download the intermediate certificate in a folder on the server.
  2. Double-click the certificate to open the certificate information.
  3. At the bottom of the general tab, click the install Certificate button to start the Certificate Import Wizard. Click Next.

     

  4. Select place all certificates in the following store , and then click Browse.

     

  5. Select the Show physical stores checkbox, then expand the Intermediate certificate authorities folder, select the below folder on the Local computer . Click OK. Click Next, and then click Finish to complete the installation of the intermediate certificate.

     

  You may need to restart IIS so that it starts the new certificate to give. You can verify that the certificate is installed correctly by visiting the site in your web browser using https rather than http.

  Links

  • Move or copy an SSL certificate on a Windows Server to another Windows Server
  • How to disable SSL 2.0 in IIS 7
  • How to configure the SSL in IIS 7.0
  • Video tutorials to install an SSL certificate in IIS 7 to NetoMeter

  Kind regards

  Joel