How the mirror system and boot partition (RAID1) in Windows Server 2008 and SATA disks

Similar Questions

• How to configure the mode of kiosh for thin clients on windows server 2008

  I have an eight Thin Clients who will use RDP to access (Terminal Server Services) Remote Desktop Services on a Microsoft Windows Server 2008 R2 Standard. I would like to set up a group of users for these Thin Clients to be in a mode Kiosh so that they have very limited capabilities, can not download and run anything, unable to save anything in the computer except on the desktop and when they log off and back on everything, they had disappeared because the mandatory profile is loaded again.

  I'll have another group that more access is needed.

  Kiosk.

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Able to access the folders but no shared drives on a Windows Server 2008 (C$, D$ etc.)

  I can access shared folders from a Windows Server 2008, but I am not able to access the shared drives (C$, D$). After entering my credentials, the system guard invites me for my credentials again and again. Any idea what can cause this?

  Appreciate the help

  Thanks.l

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the Windows Server Forums on TechNet. Please post your question in the Windows Server Forums.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Unable to see the Favorites menu when opening my computer in Windows server 2008 R2

  Original title: Favorites Menu

  Hello

  I'm not able to see the Favorites menu when I open my computer in Windows server 2008 R2.

  In Windows server 2003, I used to see the Favorites, I saved in Internet Explorer.

  Help, please.

  Hi Rochdi_carlos,

  Because the question you posted is related to the Favorites menu in Windows server 2008 R2, it would be better suited in the Technet forum. Please post your question in the following TechNet forum to get help:

  http://social.technet.Microsoft.com/forums/en/category/InternetExplorer

• How can I configure a static IP address in Windows Server 2008?

  original title: set static IP of Server 2008

  I have a Server 2008 R2 from a CD of demo loaded on a Dell computer.
  When I start my Poweredge 1950 server, I get these messages:
  ' F/W initialization devices 0% '.
  info on the RAID drivers
  "(HA-0 9Bus 2 Dev 14) PERC 5 / i integrated 5.0.1 - 0030"
  "The battery material is missing...". »
  "Source 1 or logical drives on the adapter to the host.
  Logic of 1 drive (s) handled by BIOS
  some information about the remote access configuration utility
  and then he told me that the IP subnet, gateway, are all 0.0.0.0

  I have to hit F1 to continue the boot or F2 to run the Setup utility.

  In the configuration under embedded devices utility, two network cards have TOE activated ability
  I don't seem to be able to assign the NETWORK adapter a static address, and he poses problem when I try to put in place AD DS services
  Server 2003, I read that the TOE function on the NETWORK card is loaded.  I can't disable in the BIOS screen.  I see solutions for
  This manipulation for Server 2003, but nothing for 2008.

  When I try to use installation of AD DS services in advanced mode and get to the screen to select additional options for this domain controller, and I check the DNS of the server, a warning is displayed saying that one or more physical network adapters don't have a static IP address.

  Any suggestions on how to set the static NIC card?

  Thank you

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• How to install the ssl certificate in windows server 2008?

  Hello

  Can someone give me the steps to install the SSL certificate on my application hosted on windows server 2008 R2?

  Hello

  Although technet.microsoft.com should be the best forum for the problems of server below is a guide on how to install an SSL certificate.

  It will be useful.

  To install your newly acquired in IIS 7 SSL certificate, first copy the file somewhere on the server and then follow these instructions:

  1. Click on the start menu, go to administrativetools and click on Manager of Services Internet (IIS).
  2. Click the server name in the links on the left column. Double-click server certificates.

     

  3. In the Actions column to the right, click Complète Certificate Request...

     

  4. Click on the button with the three points, and then select the server certificate that you received from the certificate authority. If the certificate does not have a .cer file extension, select this option to display all types. Enter a friendly name that you can keep track of certificate on this server. Click OK.

     

  5. If successful, you will see your newly installed in the list certificate. If you receive an error indicating that the request or the private key is not found, make sure that you use the correct certificate and you install it on the same server that you generated the CSR on. If you are sure these two things, you just create a new certificate and reissue or replace the certificate. If you have problems with this, contact your certification authority.

     

  Bind the certificate to a Web site

  1. In the column of links on the left, expand the sites folder, and click the Web site that you want to bind the certificate to click links... in the right column.

     

  2. Click the Add... button.

     

  3. Change the Type to https , and then select the SSL certificate that you just installed. Click OK.

     

  4. You will now see the listed link for port 443. Click close.

     

  Install all the intermediate certificates

  Most of the SSL providers issue certificates of server out of an intermediate certificate so you will need to install the intermediate certificate on the server as well or your visitors will receive a certificate error not approved. You can install each intermediate certificate (sometimes there are more than one) by following these instructions:

  1. Download the intermediate certificate in a folder on the server.
  2. Double-click the certificate to open the certificate information.
  3. At the bottom of the general tab, click the install Certificate button to start the Certificate Import Wizard. Click Next.

     

  4. Select place all certificates in the following store , and then click Browse.

     

  5. Select the Show physical stores checkbox, then expand the Intermediate certificate authorities folder, select the below folder on the Local computer . Click OK. Click Next, and then click Finish to complete the installation of the intermediate certificate.

     

  You may need to restart IIS so that it starts the new certificate to give. You can verify that the certificate is installed correctly by visiting the site in your web browser using https rather than http.

  Links

  • Move or copy an SSL certificate on a Windows Server to another Windows Server
  • How to disable SSL 2.0 in IIS 7
  • How to configure the SSL in IIS 7.0
  • Video tutorials to install an SSL certificate in IIS 7 to NetoMeter

  Kind regards

  Joel

• I am trying to install Windows Server 2008. When I get to the part where I should choose where the operating system is to be installed, it is blank.

  I am trying to install Windows Server 2008. When I get to the part where I should choose where the operating system is to be installed, it is blank. He told me 'No device found drivers. We see the SATA HDD in BIOS, and if I browse for the drivers, the driver is displayed. I used the command line packaged with the installer to format the drive, just to be sure. It is formatted in NTFS.

  original title: can not select the HARD drive to install on

  Thank you for visiting the Microsoft Answers site. The question you have posted is related to Windows Server 2008 and would be better suited to the Windows Server TechCenter community. Please visit the link below to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

• WIndows Server 2008 R2 the number of activations?

  I was wondering how many times he can be reinstalled and that active?
  I got it on the DreamSpark site.

  I hear her 5 times for Win 7 and 10 for the servers, but I don't know if it of true or not.

  2nd question:

  If I miss how should I do?

  I see that you can phone to activate?

  So plug in a microphone and talk to the operator or I do type or what?

  See what I mean (of another Member of the forum):

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Hello Dan_825

  Thank you for visiting the Microsoft Answers site. The question you have posted is related to Windows Server 2008 and would be better suited to the Windows Server TechCenter community. Please visit the link below to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

• How to apply opatch in oracle 11 g 2 in windows server 2008

  Give an idea and give the procedure that how apply opatch in oracle 11 g 2 in windows server 2008

  We get patches and patch puts My Oracle Support, which is the Oracle Support Web site at

  https://support.Oracle.com opens a new window

  one) to locate the patches on the My Oracle Support Web site:

  (b) sign in to your account on My Oracle Support and at the top of the page, on the left side, select patches & updates.

  Patching of the required packages, close some services not in database

  Set ORACLE_HOME and environmental variables, to check the version of opatch and apply and follow the

• Dual boot ESX 3.5 possible in Windows Server 2008?

  Hi all

  I was wondering if it was possible to dual boot ESX 3.5with Windows Server 2008 with Hyper-V.  The reason why I asked, is that we have a partner who likes to play with these two products, but has only 2 servers, and since you need 2 + cluster servers to use the capabilities of the company in both products if we dualboot for him he would save him money that he wouldn't buy more than two servers.

  Now, I know you can dualboot ESX with LILO but it is possible with Windows Server 2008? and chaning CPU virtulizing settings in the BIOS to make it compatible with Hyper-V change anything nor prevent whatever it is on the side of ESX?

  These settings should be fine; I have a PowerEdge 2950 set like that I flip back and forth between ESX 3.5 and W2K8 + Hyper-V often enough by simply exchanging the discs, and I can run 32 and 64 bit guests on both environments...

• Activation of Windows Server 2008 by using the button R2

  I can't activate Windows Server 2008 using the originally shipped with the X 3650 M3 server activation key. The media are labbled than Windows Server 2008 R2. Is that the key to R2 cannot be used for windows Server 2008 32-bit. I appreciate your response. Thank you

  You will need to contact your business partner where the system was purchased to to solve this problem.

• What is the hardware configuration recommended for 11 G R2 on Windows Server 2008 R2 64 bit

  We are about to move from 10 G to 11 G R2 R2. The platform provider supported for our application is Windows server 2008 R2 64-bit. I have to write a specification document to support my request for new material and I would like some guidance as to the recommended configuration. Environment development database server will have to host dev, test, and preliminary databases for a database of 10 GB. The production server will host only the production database.

  Any guidance appreciated.

  concerning

  Madre

  Hello

  It's all sorted out.

  concerning

  Madre

• I can't do the web pages of my drive to display in Internet Explorer in Windows Server 2008 32-bit

  I saved web pages on my local drive, but I can't seem to display in Internet Explorer in Windows Server 2008 32-bit by entering the URL in the address bar, even if they appear when I click on the file in Windows Explorer. The IIS7 start page, even if the document by default, I made the file you want.

  Hello

  The issue you have posted is related to Windows Server 2008, I recommend you post this question in the Windows Server forum.
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• I've upgraded to the new operating system and now my MacBook Pro is in trouble.  Should I uninstall the new system and if so how?

  I have upgraded to the new operating system, El Capitan 10.11.4, and now my MacBook Pro is in trouble.  Should I uninstall the new system and if so how?

  Restore the backup that you did when you replaced the old system

• change an active partition in windows server 2008 r2 makes me can't open a windows session and be invited to the compaq recovery system

  Dear all,

  I struggled with this problem for 3 days. I can't connect to windows server 2008 R2 because I accidentally change the active partition of the system partition to another partition whose size is very small (only about 1 GB). When I try to watch through the back, the sequence is all wrong. The previous system partition was becode D c. The other partition which is becoming C f.

  I tried to use startrep to fix this, but the problem remains the same.

  I also try to use bcdedit /? bootsequence, but because I don't know how to see the partition guid, I can't change the bootsequence.

  Can anyone help to open a windows session? Your help is appreciated production. I need it as soon as possible...

  Concerning

  Henry

  Dear all,

  I struggled with this problem for 3 days. I can't connect to windows server 2008 R2 because I accidentally change the active partition of the system partition to another partition whose size is very small (only about 1 GB). When I try to watch through the back, the sequence is all wrong. The previous system partition was becode D c. The other partition which is becoming C f.

  I tried to use startrep to fix this, but the problem remains the same.

  I also try to use bcdedit /? bootsequence, but because I don't know how to see the partition guid, I can't change the bootsequence.

  Can anyone help to open a windows session? Your help is appreciated production. I need it as soon as possible...

  Concerning

  Henry

  Hey henry cs

  These forums are for help on problems with vista

  I suggest that, for the best help repost you in the forums windows server 2008 below

  http://www.Microsoft.com/windowsserver2008/en/us/forums-blogs.aspx

  Walter, the time zone traveller