How to configure the PFI0 terminal on the USB-6009 case as came event counter

Similar Questions

• What is the MTBF for the USB-6009 case

  What is the average time between failures (MTBF) for the USB-6009 case?

  Hello

  Unfortunately, there is no available for the USB-6009 case MTBF.  In order to retrieve this information, there is a cost for our R & D department.  If you need this number, please contact your local representative OR or open a service request to ni.com/ask.

  I apologize for the inconvenience.

• Output analog, the USB-6009 case - can I use DAQmxWriteAnalogScalarF64?

  I just got a NI USB-6009 and I try to use the outputs analog simple.

  I'm running on a Mac, so I'll try to use the API OR-DAQmx Base 3.2 C (downloaded from here: http://joule.ni.com/nidu/cds/view/p/id/1078/lang/en).  This is the most recent version of NOR-DAQmxBase, I could find.

  I try to do continuous analog output on the 6009, which does not have a built-in clock.   I was hoping to do the sync software and just new output values when I want to.

  I can't get an output of database to work.  Other messages and the example of Windows files, (e.g., National Instruments/NOR-DAQmx Base/examples/ao/MultVoltUpates-SWTimed.c) it seems that the best thing to do would be to use the DAQmxWriteAnalogScalarF64 function.

  However, this is not in the Mac version of the C API of NIDAQmxBase.  There is actually an entry for this in the NIDAQmxBase.h file, but it is commented out.  Anyone know why?  Is it possible to use this function for the analog output on request on Mac?

  Thank you.

  Clement

  I have NEITHER-DAQmx Base installed 3.2 on a 10.4.11 system.  One of the examples files 'genVoltage.c' calls DAQmxBaseWriteAnalogF64.  I was able to compile and run this example with a USB-6009.

  The DAQmxBaseWriteAnalogF64 function would work for you?

  My guess is that, since you can write a scalar value with DAQmxBaseWriteAnalogF64, DAQmxBaseWriteAnalogScalarF64 becomes superfluous.  The example provided with the installation shows how to write a unique value (i.e. scalar.).  I pasted the code of OR below.

  int main (int argc, char * argv [])

  {

  Task settings

  Int32 error = 0;

  TaskHandle taskHandle = 0;

  char errBuff [2048] = {'\0'};

  Channel settings

  Char [] = "Dev1/ao0" chan

  float64 min = 0.0;

  float64 max = 5.0;

  Sync settings

  uInt64 samplesPerChan = 1;

  Writing data parameters

  float64 data = 3.25;

  pointsWritten of Int32;

  float64 timeout = 10.0;

  DAQmxErrChk (DAQmxBaseCreateTask("",&taskHandle));

  DAQmxErrChk (DAQmxBaseCreateAOVoltageChan(taskHandle,chan,"",min,max,DAQmx_Val_Volts,));

  DAQmxErrChk (DAQmxBaseStartTask (taskHandle));

  DAQmxErrChk (DAQmxBaseWriteAnalogF64(taskHandle,samplesPerChan,0,timeout,DAQmx_Val_GroupByChannel,&data,&pointsWritten,));

  Error:

  If (DAQmxFailed (error))

  DAQmxBaseGetExtendedErrorInfo (errBuff, 2048);

  If (taskHandle! = 0) {}

  DAQmxBaseStopTask (taskHandle);

  DAQmxBaseClearTask (taskHandle);

  }

  If (DAQmxFailed (error))

  printf ("error in DAQmxBase: %s\n",errBuff); ")

  return 0;

  }

  Hope this helps!

• How to open and close an electronic shutter with LabView 8.5.1 using an NI USB-6009 case?

  Also, I need to set up a timer so that the shutter is open for 15 minutes and closed for 30 minutes.  It has to do 500 times.

  The USB-6009 case is a relatively new device, and LabVIEW 8.5.1 is a fairly old software. You should check to be sure that you have the corresponding to your version of LabVIEW (DAQmx) drivers that support of this material. It sounds as if you put it in place to MAX and control the output manually, which is a good sign. I don't have access to the version 8.5.1 and I do not exactly remember which functions he supported, but the attached picture shows a simple diagram in a new version of LabVIEW that would do what you want. Of course, you should test with shorter and less iterations because it takes more than 2 weeks to complete! Add any controls, indicators and the error checking you want.

  Rich

• How to configure the LDAP connector in windows server 2012 R2 Active Directory?

  How to configure the LDAP connector in windows server 2012 R2 Active Directory?

  Hello

  Please post your question in Server TechNet Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Can someone give an example of how to configure the subnet mask associated with the network and host of an IP address part?

  Can someone give an example of how to configure the subnet mask associated with the network and host of an IP address part?

  Hi stuckfree,

  The question you posted would be more appropriate on the TechNet Forums. I would recommend posting your request here.

  http://social.technet.Microsoft.com/forums/en/itproxpsp/threads

• How to configure the router Linksys DD - WRT for WVC54GCA E4200

  I don't know how to configure the router Linksys DD - WRT for WVC54GCA E4200. DD - WRT is very complcated. Help, please! Also, I used the TZO.com to the DDNS. Can I set up the DDNS for DD - WRT router? I used the DDNS to my old model router before. Thank you.

  I followed the TZO supporter last night. I can watch my WVC54GCA outside. All solution links:

  http://tzodns.com/support/tutorials/188

  http://tzodns.com/support/tutorials/190

  Hi Majekho,

  Your domain name has decided to 99.245.xx.x. If you go to www.test.tzo.com from the location of the host, you must see this IP address. If these numbers are the same, then all with TZO works correctly. I guess that it is a simple problem with ports (80, 1024) is not open in the router and forwarded to the right internal IP address of the device (for example. 192.168.1.xxx).

  In addition, if you have a DSL, you will need to call your ISP and ask them to show you how to put your modem in "bridge mode". This will disable the firewall in the modem that blocks incoming connections even if you open ports in your router.
  In addition, during the test, it is best to test on your device remotely, this is due to a common problem called loopback with most routers. For more information about looping, take a look at:

  http://helpdesk.TZO.com/cgi-bin/KB.cgi?view=140

• How to configure the settings of mail on HP Laserjet Enterprise 500 color MFP M575 printer/scanner?

  How to configure the settings of mail on HP Laserjet Enterprise 500 color MFP M575 printer/scanner?  The Office has 5 staff members each with ending with [email protected] for example e-mail addresses.  We have also created an email for option analysis as [email protected] (not sure if creating an e-mail address for the scan option is required).  We are not part of any domain, and there is no server in the office.  When you try to configure the email on the printer/scanner control panel it asks the host name.

  What host name that I can use?

  If you try to configure the browser by using the IP address of the printer, he asks as the SMTP server. The MS Outlook 2010 all our emails use mail.junior - albania.org incoming mail server and outgoing.  Other settings in MS Outlook 2010 are box My outgoing server (SMTP) requires authentication checked and use the same settings as my mail server entering selected.  On the Advanced tab: incoming server (Pop3): 110 (SSL encryption is not checked) and outgoing (SMTP) server: 465 use the type of encrypted connection (SSL) following.

  What server SMTP should I use in this case?

  I would appreciate your help in the configuration of the HP printer/Scanner for scanning and sending by electronic mail to the members of the office staff email addresses.

  Thank you...

  I'll link you to the product page with several documents which I hope will help you to configure your e-mail settings. Please look through them and see which ones fit your needs:

  Scan and send (e-mail, send to folder, digital sending, etc..)

  Here is another site that has some videos that will guide you through the entire upward (here I would try everything first )

  Simulations of MFP - digital send

  If these don't work, please let me know and I will continue to search it for you.

• my windows pc very experience 1, I am embarressed to admit that I can not understand how to configure the windows/outlook e-mail system. This pop and smtp or what ever Q was, I still can't understand.

  I'm unable to set up Outlook, or now called windows mail, I think. but for the life of me I do not understand how to configure the e-mail program that comes with now it windows Vista 64 that came on my new pc.  can someone please?  Thank you

  Windows Mail is/was not Outlook.

  Windows XP e-mail program called Outlook Express.

  Outlook is a part of the office.

  Windows Mail in Vista is the replacement of e-mail for Outlook Express (XP) program.

  Read this section on how to set up Windows Mail in Vista:

  http://www.SimpleHelp.NET/2007/02/07/a-beginners-guide-to-setting-up-Windows-Mail/

  Link above has an easy to follow Guide to set up Windows Mail.

  Contact your ISP (Internet Service Provider).

  They offer your broad band/Dial-up connection.

  Ask them to:

  username
  password for your service account to wide band/Dial-Up with them

  Server of incoming POP3 mail
  outgoing mail SMTP server

  The above information is required to set up Windows Mail.

  ISPS are usually happy to help you set up your email account.

  See you soon.

  Mick Murphy - Microsoft partner

• My IP security camera is different my network ip address, how to configure the camera to match the ip address with the router cable time Wörner

  Please someone help me configure my camera IPsecurity model m12 mobotix ag. It allows to work in the corporate network, but they close down and I didn't bring the camera House but there different IP address of my network and I don't know how to configure the camera to have the same IP address with my home router to TWC, thanks

  Router connections by opening network, in the Panel control, search for the router / properties, enter its configuration

  data in the boxes provided, you will get on the router, a sticker shows data. If lost or deleted, go to its Web

  for the data. Also, perhaps the home page of IP camera offers software/drivers.

• How to configure the logo screen of handguns to several domain user time?

  How to configure the logo screen in time to punch to several domain like domain1\administrator, domain2\administrator and My-PC1\administrator user in windows 2007?

  Hello

  It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Forums. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  For reference:

  http://social.technet.Microsoft.com/forums/en/w7itpronetworking/thread/de5fea8e-E327-4D71-a599-546dea543149

  Hope this information helps.

• How to configure the agent to monitor performance only the vcenter vmware and esx, not need to monitor virtual machines

  How to configure the agent to monitor performance only the vcenter vmware and esx, not need to monitor virtual machines

  This is not possible with the way in which we collect information.

• How to configure the bluetooth with Kyocera android phone connection to share photos, music & video files

  Original title: Windows 8 Configuration bluetooth with Kyocera android phone?

  Configuration of bluetooth of Windows 8 with Kyocera android phone?  I got a laptop with bluetooth Tech. How can I set up a connection and share photos, music & video files?

  Hey GQ - Jon'Jon,.

  Make sure that Bluetooth is enabled on the computer as well as your Kyocera android phone.

  Make sure that the phone is paired with your computer.

  For information about how to configure the Bluetooth with Kyocera android phone connection to share photos, music & video files, it would be better if get you in touch with Kyocera phone support for assistance. Please see the support link:

  http://www.Kyocera-Wireless.com/support/phone/

  Please feel free to respond if you face problems with Windows in the future.

• How to configure the network adapter when you run ESXi on VmWare workstation?

  How to configure the network card installing ESXi on VmWare workstation 6.0.0?

  These are the options: I tried bridged, host-only NAP.  None of them works

  

  What Miss me? driver or adapater?

  I'm running on vmware workstation on Windows 7 with Lenovo laptop.

  in the configuration of your virtual machine, the main issue is memory. you gave the 2 GB of RAM, whereas ESXi 6 cannot go forward without minimum 4 GB of RAM.

  If please have 4 GB of RAM and re-run Setup. you will get through.

  message about the network card should also not appear after that. What kind of network you choose depends on your need.

• How to add images to my table and how to configure the Web site? Help, please

  I do not understand how to configure the Web site and add images to a table and make hyperlinks.

  First, set the folder of your Local Site saying DW where to save the files on your local hard drive.  Go to Site > new Site.

  I think it is easier to start with a page layout predefined by using one of the appropriate templates to bootstrap that comes with DW.

  Go to file > new > (Starter models > models Bootstrap). Select one:

  • Bootstrap-Agency
  • Bootstrap-eCommerce
  • Bootstrap-Portfolio
  • Bootstrap-product
  • Bootstrap-real estate
  • Bootstrap-curriculum vitae

  Press the button create.

  For pictures, go to insert > Image. Select an image and save it in the folder of your local site.

  Nancy O.