How to configure the private network interface between two VMS os invited using red hat linux

Similar Questions

• How to make the difference in percentage between two matrices?

  Hello everyone, I just want to ask how to make the difference in percentage between two binary matrices. This is to compare two images converted to matrices in LabView. Thank you.

  Well, in the current image interesting pixels are zero in the reference image. Here is a small example that would take all the zero 100% pixel, then look at the pixels of same in the other image to see how are always 0.

  Modify if needed.

  

• Configuring the private network or disable questions for the network discovery in network and sharing Center.

  I just got my laptop all cleaned and had everything updated. When I got it back I was mainly concerned how my network and discovery sharing would work, because we never had a home computer and a laptop computer at a time. Our PC at home has always defined for a private network. Today, they are both defined for the private sector, the laptop will probably always be at home too, but I was curious to see how the printer share everything would work on my laptop. It would not print and I checked just the settings that the guy I of any program for me usually had the top settings. On my laptop that I was first checking out and the network discovery has been to custom on both, one on my PC was on, laptop has never been verified we or off, file sharing has been enabled on both. public folder sharing off on both, printer sharing turned off the PC at home, but on laptop, so much time, I guess me to turn on the PC I don't know yet. Printer password sharing is on the PC and laptop. I try essentially whether it is what you would call a custom setting make for a firewall setting, or could someone please just kinda tell me if the sharing of network discovery should be turned on on the laptop and the PC, or was it not suppose to be turned on to the laptop, but on the PC only? Which should be lit and which should not be enabled in the configuration of the private network? I just want to be able to print my laptop if I want to. Thank you

  [Moved from the community centre of Participation]

  Hello

  What version of Windows are you using?

  This article was written for the two Windows Vista & Windows 7.  Drop-down menu (right) allows you to activate Windows Vista Instructions.

  http://Windows.Microsoft.com/en-us/Windows/install-printer-home-network#1TC=Windows-7

• How to find the difference "within weeks" between two date values?

  Hi all

  Jdev version 11.1.1.7.1

  I used two < af:inputDate > & a < af:inputText > < af:panelFormLayout > components. My requirement is, I want to display the difference of weeks between these two day values in the inputText component when the user clicks the shape.

  Any suggestion would be appreciated.

  Kind regards

  
  

  Novel

  You can use this method to get the number of days between the day and date, and then divided by 7 to get the number of weeks

  public static long getDifferenceDaysBetweenTwoDates (d1, d2 oracle.jbo.domain.Date oracle.jbo.domain.Date)

  {

  If (d1! = null & d2! = null)

  {

  return (d1.getValue () .getTime () - d2.getValue () .getTime ()) / (24 * 60 * 60 * 1000);

  }

  return 0;

  }

  Check - http://sameh-nassar.blogspot.in/2014/10/dealing-with-dates-in-java.html

  Ashish

• How to configure the host network to pass

  Hi all

  We do the VLANS on our ESXi hosts and would like to have traffic flows VLAN on our physical network as well.  In doing so, I'm curious of what should be the "correct" configuration for the connection between the physical host and the switch.  You do you enable trunking ports or leave the port with the default configuration?

  Thank you!

  -ToTheCloud

  You do you enable trunking ports or leave the port with the default configuration?

  Assuming that you are talking about Cisco switches, then set up the ports on the switch as junction ports. For other providers, it is named marked ports. In any case, the common name for this is to 802. 1 q (dot1q). Please take a look at http://kb.vmware.com/kb/1004074 for an example of configuration.

  André

  Post edited by: a.p. - corrected link

• How to configure a direct cable connection between two computers in Windows 7

  Hello

  I'm trying to set up a connection by serial cable with serial cable RS232 DB9 female-female between 2 PCs, one with Windows 7 and Windows 8.
  
  For the initial check of the cable, I used a terminal program such as HyperTerminal, PuTTY, RealTerm. But none of the PC was able to read/write data from the port. I shorted her transmit and receive pins (2 & 3) at one end with a jumper (PIN stapler) for a loop to return the data to the Terminal. Terminal exits each letter typed twice, that is to say the cable and the COM port works correctly for two computers. But with 2 PCs connected, the Hyperterminal does not output nothing written of another PC Hyperterminal.
  Possible suspects: -.
  1. in the device-> PORTS (COM and LPT) Manager - there are 3 elements in both PC
  Communication Port (COM1), Communications Port (COM2), the Printer Port (LPT1).
  while I plug / unplug the cable at the PC, nothing changes in this section.
  2. the drivers for this type of cable to not installed.
  3. different OS installed on the PC.
  4 or I have to create a new connection , and then connect directly to another computer as mentioned in http://support.microsoft.com/kb/305621/en-us . But I didn't know how to do these steps in Windows 7/8.
  Any idea about this problem is appreciated.

  The problem is your trying to use both ports 'exit' to connect two computers / never going to work.

  VGA ports are for v's t. 'If' they are able to c.p.. otherwise, you will need to use a HDMI to the TV which is also an exit from the c.p.

  If you notice your computer and your monitor using a DVI port connection not a VGA.

  And no you can not use a DVI cable either :)

• How to calculate the periods that overlap between two or more given the date range?

  Hi all

  If there are several durations then how we can calculate the period of time that overlap between these times.

  For example: for 3 time periods. 03/12/2015-16/08/2015, 05/01/2015 to 31/07/2015 and the 06/09/2015 to 30/11/2015, how the overlap period can be calculated?

  There are many potential unknowns in your question.  For example, you want to count any overlap at all?  If two dates overlap, what matters?  Overlap - each of them?

  In any case, here is a solution that counts how many periods are overlapping in any point in time...  She, of course, using temporal logic.  You can then use ValueAt(), WhenLast(), WhenNext(), etc. as appropriate.

  Assume that your model has a child entity called 'the period' with name 'all time periods' relationship and basic attributes 'start date of the period of time' and 'date of end of period of time'.

  In your example:

  an entity should have the time period start date = 03/12/2015 and the date of end of period of time = 16/08/2015

  another entity might have the time period start date = 01/05/2015 and the date of end of period of time = 31/07/2015

  another entity might have the time period start date = 06/09/2015 and the date of end of period of time = 30/11/2015

  To find the number of overlapping over time, we want to count or entities that have an active period, so the rule is perhaps the sum:

  the number of overlapping = the number of all the periods for which it is true that the time period is active

  How do we know a time is active?  This is the time logic comes in.  He is active on or after the start date or no later than the end date:

  the time period is active if

  TemporalOnOrAfter (the date of beginning of period of time) and

  TemporalOnOrBefore (date of end of period of time)

  That's all.  Now, you can perform a temporal visualization of the 'number of overlapping' and you'll see it rise and fall over time.  As a reference, he said that the number of overlapping = 3.0 from 06/09/2015 across 31/07/2015.

  I hope this helps.  You can use the same model to count periods of time functions, but you end up having to use the most logical date.  You of course can count the total number of entities and compare this number of overlap over time to see if they overlap, but I digress...

• Calculate the difference in days between two Dates

  Hello

  I'm trying to understand how to calculate the difference in days between two dates using JavaScript in LiveCycle. (Minimum = JavaScript knowledge)

  Where 'Start_Date' and 'Current_Date' are the names of the two dates in the palette of the hierarchy. (the two Date/time field)

  * Current date is using the object > value > execution property > current Date/time

  I need a text or number field showing the difference in days. (Difference_in_Days)

  I noticed the following code is pretty standard among other responses:

  var

  Start_date = new Date (Start_Date);

  var

  Current_Date = new Date (Current_Date);

  var

  nAgeMilliseconds = Current_Date.getTime) - Start_date.getTime ();

  var

  nMilliSecondsPerYear = 365 * 24 * 60 * 60 * 1000 ;

  I know there is lack of code and code above are may not be not correct.

  Please notify.

  OK, that's because of the way that javascript and works of the calculate event.  The field will be filled with whatever the script resolves at the end of execution. Technically, your script does not have a value because the last thing you do is an assignment to a variable.  Change the last line as follows:

  Math.ABS ((firstDate.getTime)

  ((- secondDate.getTime (()) / (oneDay));

  (eliminate the variable assignment) and get rid of the app.alert.  Your script will "return" (have) regardless of the value of calculation from the East and which will be stored in the field.

• Can someone give an example of how to configure the subnet mask associated with the network and host of an IP address part?

  Can someone give an example of how to configure the subnet mask associated with the network and host of an IP address part?

  Hi stuckfree,

  The question you posted would be more appropriate on the TechNet Forums. I would recommend posting your request here.

  http://social.technet.Microsoft.com/forums/en/itproxpsp/threads

• My IP security camera is different my network ip address, how to configure the camera to match the ip address with the router cable time Wörner

  Please someone help me configure my camera IPsecurity model m12 mobotix ag. It allows to work in the corporate network, but they close down and I didn't bring the camera House but there different IP address of my network and I don't know how to configure the camera to have the same IP address with my home router to TWC, thanks

  Router connections by opening network, in the Panel control, search for the router / properties, enter its configuration

  data in the boxes provided, you will get on the router, a sticker shows data. If lost or deleted, go to its Web

  for the data. Also, perhaps the home page of IP camera offers software/drivers.

• How to configure the network adapter when you run ESXi on VmWare workstation?

  How to configure the network card installing ESXi on VmWare workstation 6.0.0?

  These are the options: I tried bridged, host-only NAP.  None of them works

  

  What Miss me? driver or adapater?

  I'm running on vmware workstation on Windows 7 with Lenovo laptop.

  in the configuration of your virtual machine, the main issue is memory. you gave the 2 GB of RAM, whereas ESXi 6 cannot go forward without minimum 4 GB of RAM.

  If please have 4 GB of RAM and re-run Setup. you will get through.

  message about the network card should also not appear after that. What kind of network you choose depends on your need.

• How to configure the network device agent

  I added a network device (router) in the new platform, its not to go for all of the alerts in tool Hyperic. How to configure the network device to get information to the Hyperic server. Do we need to do any configuration of SNMP.
  
  Can someone help me please.

  Hi Cyndhya,

  Do you mean you want to see traps SNMP generated by your device network at HQ? To do this, you need to configure one of the agent HQ to receive traps and configure the network device to send the trap to the agent. Once this operation is complete, you should be able to add the device network platform (you must use the agent HQ for the monitoring network device connection).

  Here is the step by step guide:
  http://support.Hyperic.com/display/DOCSHQ30/agent+SNMP+trap+receiver

  Koffi

• How to configure the CD driver on the host for a virtual machine?

  After you create a virture machine and put the CD of driver on host, when powered on the vertual machine, may not start the drive form the CD only from NIC.

  How to configure the CD driver on the host for a virtual machine?

  Right-click on the virtual computer and go to edit settings. Click the Options tab and under the tip list, there should be Boot Options. Enter an amount of milliseconds to wait before your boot, so you can activate the CD-ROM. You can also activate the CD even if it boots to the NETWORK card option, and then reset the virtual machine. Get the focus of this virtual machine on the console session, and then press ctrl-alt-insert. Your CD-ROM will stay connected if you do not want to delay the startup process.

• Can I manage ESXi with the GUI Client from outside the private network?

  ESX Server 3i, 3.5.0 123629

  HP ProLiant ML370 G5

  1 P2V Windows 2003 SBS Server virtualized hosting

  Company has 5 static public IP addresses. One is used by SBS, another for the public wireless network. I would use a third party to be able to access the ESX and perform remote management.

  I am able to use SBS Remote Workplace hop on the server or any computer of client desktop and can run VI Client from there, but prefer to do it from my computer so I don't attach resources to the office. two vSwitches - vSwitch0 is the 'network' and vSwitch1 is the "Public network". I configured a VMkernel Port on vSwitch1 like the default (vSwitch0) "network management". vSwitch1 takes the address of the gateway on the private network and when I change it to the ISP on vSwitch1, it also changes on vSwitch0.

  Is this possible?

  Welcome to the VMware community forums.  The VMkernel can have as a gateway, so that's why on vSwitch0 changes when you change vSwitch1.   Technically, there is nothing to stop you adding another on vSwitch1 and vmkernel port giving a public IP address (which you can then connect to the VI client).   That said, it's not recommended to to do.  The management for ESXi port is best left on a private network and possibly protected by a firewall.   Put the vmkernel Internet port would be like putting IP to an IP SAN management or the management of a switch on the Internet.  Yes you can do it, but this isn't a good idea.  Instead, you might consider putting in a simple VPN server and then connect to ESXi through that.

• Printer all in one HP3520 - how to select the wireless network and enter the WEP key?

  According to print my wireless network is detected.

  How to connect the! @# % printer $ fo the wireless network and enter the WEP key?

  Instructions on the HP site tell me to selet NETWORK on the printer control panel.  Well, there's a way to select the NETWORK from the control panel.  It is not an option for him.

  I downnloaded and installed the latest drivers.

  I have restored the default settings.

  How to select the wireless network and enter the WEP key?

  All of HP's instructions seem to be for a newer printer with a touchscreen.

  I want that the printer is connected to my main computer via the USB port.  I want to be able to print wireless phones and tablets.

  My 3520 is not a 'touch Screen' and it has wifi.

  However, the following work:

  Try to open the HP Deskjet 3520 icon, open the utilities tab, click on convert USB wireless, by following the steps on the screen.

  This leads me to believe that ONLY the wireless doesn't work.  I know now that the part of the sentence "Convert USB to wireless connection" is supposed to mean "works like USB and wireless.

  Thank you for your help