How to configure WPA on Aironet 1300 without using RADIUS
I'm trying to put in place a couple of Aironet 1300 s. I want to use WPA, but I do not have a radius server. Is it possible to configure then 1300 s to use WPA with a password and not a RADIUS server? Thank you.
Yes it is possible. According to the Radio, you call the encryption method to use:
algorithms for encryption tkip encryption mode
then under the ssid:
SSID dot11 Test
open authentication of the
authentication for wpa key management
WPA - psk ascii 0 cisco1234
Both encryption and keys match on both sides and a root bridge and the other nonroot they should meet perfectly
Tags: Cisco Wireless
Similar Questions
-
How to configure NTP between Virtual Machines without using Vsphere Client
I have a group of 8 virtual servers of 5.5 ESXi without an Internet connection. There are virtual machines on each of these 8 virtual servers.
I did one of these 5.5 virtual ESXi host a NTP server by editing the file /etc/ntp.conf with below configuration and
started the ntpd daemon. He began to take the time to its local clock, here's the output of ntpq Pei
IP server 10.108.190.14
ip address of the client 10.108.190.15
Server /etc/ntp.conf
> > driftfile/var/lib/ntp/drift
> > server 127.127.1.0 maxpoll 4
> > fondant 127.127.1.0 stratum 10
| ntpq Pei
| refid distance st t when poll reach delay offset jitter
| ==============================================================
| * LOCAL (0). LIUX. 10 l 2 64 377 0.000 0.000 0.001Then I edited the file /etc/ntp.conf on customers with below configuration but the customer would not synchronize with the server. He
wouldn t get response from the server. Here is the output of ntpq Pei
Customer /etc/ntp.conf
> > driftfile/var/lib/ntp/drift
> > server 10.108.190.14 iburst
| ntpq Pei
| refid distance st t when poll reach delay offset jitter
| ==================================================================
| 10.108.190.14 INIT. 16 uNow, when I configure NPT Client/Server on virtual machines through the Configuration Option under Option Configuration time
in Vsphere Client everything works fine and the client and the server to synchronize with each other. I checked the file /etc/ntp.conf on both the client
and the server and it has a couple of restrict 127.0.0.1 and restrict the lines added by default kod nomodify etc.
So why NPT Server featured when enabled via Vsphere Client works very well, but it does not work when it is configured manually
in the virtual servers directly.
I was connected to a vCenter Server Appliance through the VSphere Client and enabled the synchronization of time of the NPT.
I really need to know how to configure the NTP server without using the Vsphere Client so that I can automate the
task by writing a python script that would connect to each virtual server and NTP Client/Server configuration.
Any help in this issue deeply appreciated!
Thank you!
You can configure the ntp server without using viclient.
Take a look @ http://kb.vmware.com/selfservice/documentLinkInt.do?micrositeID=&popup=true&languageId=&externalID=1003063
Hope this helps
-Assane
-
I can't find out how to configure my joy (attack3) stick to play Flight Simulator. I don't want to use the keyboard on my computer to steal the game... Where can I find the instructions on how to configure and use the joystick?
Hello
1. what happens when you connect the joy stick?
2. do you get an error message?
3. what version of Windows are you using?
Perform the steps mentioned below and check if that helps:
Step 1:
Flight Simulator x: using a gamepad
http://www.Microsoft.com/en-US/Download/details.aspx?ID=16624
Step 2:
Usually, vista Windows 7 will find and automatically install the necessary drivers when you plug your game controller into your computer.(a) connect the joystick to the USB port via the adapter.
(b) see if it is detected.
(c) Windows should recognize the new hardware and set in place to work properly.
If this isn't the case, install the relevant drivers for gamepad for the manufacturers Web site.
Step 3:
I suggest the following steps and check for the device.
1. in Control Panel, open game controllers. To do this, use one of the following methods:
a. click Start, typejoy.cpl in the Search box and press ENTER.
2. click on your game controller, and then click Properties.
3. on the Test tab, test the game controller to verify functionality.
Here is the link:
http://support.Microsoft.com/kb/831361
I hope this helps.
-
How to create new worksheet in excel without using report generation tools
Hello
Im trying to create a file with 8 spreadsheet excel. I am currently using scripture to the worksheet of the vi for that file. But how to create multiple worksheets in an excel file without using the report generation toolkit module of the OR?
Concerning
Jay
Hello
You can use the nodes property with the class selected as Activex Excel and create all the tools to Excel. See the attached example.
Kind regards
Constant(Bravo to give good answers, mark it as a Solution If your problem is resolved)
-
How to retrieve the values of character without using single quotes
Hi all
How to retrieve the values of character without the use of single quotes. Its Possible in Oracle SQL
Please answer me...
For example
Is actual query-> Select * from employees where name like in("SCOTT", "JAMES", "ALBERT",...);
I want to--> Select * from employees where name like(SCOTT, JAMES, ALBERT...); -without the use of single quotes.
Why I need this application, I need to retrieve the records more than 200 employees in a select statement by using name in where clause.
shagarmahabubjan wrote:
Hi all
How to retrieve the values of character without the use of single quotes. Its Possible in Oracle SQL
Please answer me...
For example
Actual query is---> Select * from employees where name like in("SCOTT", "JAMES", "ALBERT",...);
I want to---> Select * from employees where name like(SCOTT, JAMES, ALBERT...); -without the use of single quotes.
Why I need this application, I need to retrieve the records more than 200 employees in a select statement by using name in where clause.
In short... you can't. The channels are channels, and SQL and PL languages dictate that the string literals are provided within single quotes.
I don't see how trying to retrieve more than 200 records of employees in the select statement means that you must get rid of the quotes.
Be clear in what you ask: Re: 2. How can I ask a question on the forums?
and take note of the FAQ link davidp provided the solution "variable IN the list.
-
How to view the line of columns without using the pivot keyword
Hello
could someone help me how to display lines in columns without using the keyword pivot and actuall is my scenario, iam having two tables with names and examples of data is shown below
MIDDLE MINAME TASKID TASKNAME IDENTIFICATION PROJECT
1 PROJ1 1 AA 100 PR1_TASK1
1 PROJ1 3 CC PR1_TASK3 102
1 PROJ1 DD 4 103 PR1_TASK4
1 PROJ1 EE 5 104 PR1_TASK5
1 PROJ1 6 105 FF PR1_TASK6
2 PROJ2 EE 5 114 PR2_TASK1
2 PROJ2 6 115 FF PR2_TASK2
2 PROJ2 GG 7 116 PR2_TASK3
2 PROJ2 HH 8 117 PR2_TASK4
2 PROJ2 9 118 PR2_TASK5 JJ
2 PROJ2 KK 10 119 PR2_TASK6
2 PROJ2 1 AA PR2_TASK7 120
The output should show the project and County of tasks at a given stage as shown below
project AA BB CC DD EE FF GG HH JJ KK
1 2 0 1 5 3 2 0 2 1 0
2 1 2 0 2 1 0 2 4 3 1
Thanks in advance,
VVRCREATE TABLE pivot_test ( ID NUMBER, PROJECT VARCHAR2(10), MID NUMBER, MINAME VARCHAR2(5), TASKID NUMBER, TASKNAME VARCHAR2(10) ); INSERT INTO pivot_test VALUES (1, 'PROJ1', 1, 'AA', 100, 'PR1_TASK1'); INSERT INTO pivot_test VALUES (1, 'PROJ1', 3, 'CC', 102, 'PR1_TASK3'); INSERT INTO pivot_test VALUES (1, 'PROJ1', 4, 'DD', 103, 'PR1_TASK4'); INSERT INTO pivot_test VALUES (1, 'PROJ1', 5, 'EE', 104, 'PR1_TASK5'); INSERT INTO pivot_test VALUES (1, 'PROJ1', 6, 'FF', 105, 'PR1_TASK6'); INSERT INTO pivot_test VALUES (2, 'PROJ2', 5, 'EE', 114, 'PR2_TASK1'); INSERT INTO pivot_test VALUES (2, 'PROJ2', 6, 'FF', 115, 'PR2_TASK2'); INSERT INTO pivot_test VALUES (2, 'PROJ2', 7, 'GG', 116, 'PR2_TASK3'); INSERT INTO pivot_test VALUES (2, 'PROJ2', 8, 'HH', 117, 'PR2_TASK4'); INSERT INTO pivot_test VALUES (2, 'PROJ2', 9, 'JJ', 118, 'PR2_TASK5'); INSERT INTO pivot_test VALUES (2, 'PROJ2', 10, 'KK', 119, 'PR2_TASK6'); INSERT INTO pivot_test VALUES (2, 'PROJ2', 1, 'AA', 120, 'PR2_TASK7'); SELECT ID as PROJECT, SUM(DECODE(miname, 'AA', 1, 0)) AS AA, SUM(DECODE(miname, 'BB', 1, 0)) AS BB, SUM(DECODE(miname, 'CC', 1, 0)) AS CC, SUM(DECODE(miname, 'DD', 1, 0)) AS DD, SUM(DECODE(miname, 'EE', 1, 0)) AS EE, SUM(DECODE(miname, 'FF', 1, 0)) AS FF, SUM(DECODE(miname, 'GG', 1, 0)) AS GG, SUM(DECODE(miname, 'HH', 1, 0)) AS HH, SUM(DECODE(miname, 'JJ', 1, 0)) AS JJ, SUM(DECODE(miname, 'KK', 1, 0)) AS KK FROM pivot_test GROUP BY ID; PROJECT AA BB CC DD EE FF GG HH JJ KK ------- -- -- -- -- -- -- -- -- -- -- 1 1 0 1 1 1 1 0 0 0 0 2 1 0 0 0 1 1 1 1 1 1
-
Manually configure the client 11 essbase (without using the Installer)
Hi all
is it possible to install the Essbase 11 client without using the installation program?
I tried to copy the 'bin' and 'regional settings' directory of an existing facility and put in place the variable of environment ARBORPATH - without success.
I missed something? Maybe some registry entries? Or is it not possible to manually configure the essbase client?
Any response would be appreciated.
See you soon,.
MartinIn 11.1.2.x, you can get a separate installer for essbase spread spreadsheet add-in.
Simply, you can run that as we do in version 9. -
How to configure the screensaver with password without needing the password to connect?
Under 'control userpasswords2', I didn't put no password required to connect, and I'd like to set password for the screen saver if computer 30 minutes of inactivity.
Anyone have any suggestions on how to do it?
Thanks in advance for your suggestionsIf you want a CV of login password for your screen saver, you must create a user account that is password protected.
That's what you have asked us how to do here?
See you soon.
-
Hello!
I have big screen of laptop if limited space on the vertical axis. Then
(1) I want to get rid of the tab bar when I don't have a single open window.
(2) I want to get rid of the title bar, which does not include any necessary information.
(3) I want to move the address bar in the menu bar.Before Australis, it was easy to do. After that I did the update that I searched a long time solutions. I found only Classic theme restaurateur. It's good, but it often causes my computer to high power consumption which makes the laptop very hot.
If ho can I get vertical space (see 1-3)?
Best wishes, Dimi
The problem is finally solved. To overcome the limitations of its latest versions of Firefox, I disabled all addons and enabled them one by one by checking if they are causing problems.
For example, I used Classic theme restaurateur for vertical space. But it causes problems if used with SettingSanity I used to get the button javascript back (bug Firefox not fixed since version 23!). So I went to another tool (toolbar buttons). And so on.
Best wishes, Dimi
PS: If I knew how many hours it takes to get the functionality of the previous versions of Firefox back I had never made this udate. But I learned my lesson (no change of Firefox more)
-
How to restart the Satellite 5200 801 without using the recovery disk?
Hello
I haven't used my Satellite 5200 801 for awhile and now it does not start. That's what I have on the black screen:Intel® Boot Agent Version 4.1.04
Copyright © 1997-2002, Intel Corporation
PXE - E61: Media test failure, check cable of
PXE - M0F: Exit Intel Boot Agent.
Insert system disk in drive.
Press a key when tready.I have the product recovery disc, but which will erase all existing data and rebuild. Is there a way to boot my PC without the use of the recovery disk?
Thanks for any help.
> PXE - E61: Media test failure, check cable of
This message means that laptop tried to boot from LAN.
Given that this was not possible the PXE - E61: Media test failure, check cable appearedI guess that the HARD drive is defect and therefore, the laptop won't boot from the internal HARD drive.
In this case also your internal data on the HARD disk are lost.But to be100% sure that you can remove the laptop HARD drive, could use a drive enclosure HARD 2.5 to connect the HARD drive to another computer just to check if you would be able to access data on the HARD drive
-
I want to understand, how can I go back and forth between songs in iPod nano 7th generation. I thought that all iPods have this easy navigation through buttons system, but I don't think it's available in iPod Nano. After I search the Internet, I found that I can go directly through a double pressure on the middle part of the volume button band. But, is it possible to skip to the previous song?
On the 7th gen iPod nano, there are three buttons on the side. Increase volume / Play/Pause : turn down the Volume. Next song press Play/Pausetwice. Previous song is triple - Play/Pause-press.
NOTE: If you have headphones with control buttons on the cord, same three buttons are there, and they work the same way for the read command.
-
How to configure the Windows speech recognition and use gtalk and gmail?
Original title: Windows Vista speech recognition program the
Trying to learn how to use the program of recognition of the window so that I can help a friend who has very high served as his hands. I'm getting the hang of it, but I need to know how to use Windows RV with gmail, because that's where we have been typing his e-mails for him, and is where he'd like to read his mail. On my own page of gmail, I am able to use the "numbers" for everything except actually typing in the main field, where he would actually type emails. Anyone able to help? Max of TIA
Hello- What happens when you click on the text box and dictate?
- Also, try to use the HTML version of gmail and check.
1. in Windows vista speech recognition.I've collected some articles from the Microsoft Knowledge Base that will help you in until the speech recognition settings.Windows speech recognition
http://www.Microsoft.com/enable/products/windowsvista/speech.aspxSet up speech recognition
http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-speech-recognitionSetting speech options
http://Windows.Microsoft.com/en-us/Windows-Vista/setting-speech-optionsWhat can I do with speech recognition?
http://Windows.Microsoft.com/en-us/Windows-Vista/what-can-I-do-with-speech-recognition2 on the use of speech recognition on gtalk you can ask your question on the forums of gtak. Here is the link.Voice and video Chat
http://www.Google.com/support/forum/p/chat/label?lid=18819d87e4369fa5&hl=enI hope this helps.Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. -
How can I make printer go online without using usb
OK... the icon of the printer with the printer mx860. how he do it online? cause right now, he says and goes offline when I unplug the usb cable...
Hi Linda,.
Usually, when you use a printer connected via USB, it must be connected with the USB cable to view offline.
When you unplug the USB cable, it will display offline.
If the printer is able to take over a wireless or Bluetooth connection, and then you try using wireless or Bluetooth connection to see online it.
If you use a Canon printer, you can also consult the Canon support website to check the specifications of the printer and get help.
Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.
-
Help, please
Hello
Local and remote syslog feature can be configured for a cluster of similar hosts using the host profiles.
For more information, see guide installation and Set Up Syslog of the section of the Interface of host profiles in vSphere Installation.
Connect the Server vCenter by using the vSphere Client.
Click home.
Under the administration section, click host profiles.
Create a new profile or modify an existing profile.
In the Edit Profile dialog box, set one or more of the five configuration options.
If you configured using esxcli or advanced syslog configuration options and this has captured a host of reference, 5 configuration options are already visible in the Advanced Configuration option section.
If syslog has not been previously configured, right-click the section of Advanced Configuration options and add a profile for each of the five configuration options.
Save the profile and assign it to the hosts.
For more information please see the documentation Center: (Documentation Centre of vSphere 5.5 )
-
How we configure ESXi 5.1 and FreeBSD use VMXNET 3?
I installed the tools, but how do you get FreeBSD to work with the new 3 VMXNET? When I do the drop down in the settings, the last being shown that there are 2 VMXNET. What I found was to change the ifconfig_em0 of ifconfig_vmx3f0 to use 3 VMXNET.
Thank you!
What version of FreeBSD? Compatibility matrix to ensure that it is fully supported by 5.1, including VMXNET3 ESXi:
http://www.VMware.com/resources/compatibility/VCL/result.php?search=FreeBSD&searchCategory=guest+OS
For example, FreeBSD 7.4 does not support VMXNET3 under ESXi 5.1:
On the other hand, FreeBSDE 9.0 supports VMXNET3 under ESXi 5.1:
Also, what version of virtual hardware running this VM? Vmxnet3 is available in v7 and later versions:
Maybe you are looking for
-
iPod nano detected but not recognized, why?
My wife has an ipod Nano 7 G. We have 10 Windows and iTunes 12.3.3.17. It worked fine for months. But today it has plugged his ipod, and he wiped all the music on the ipod, suffice it to say that she is not happy. She then unplugged, plugged in, and
-
Two problems with my laptop Satellite Pro
Hello First of all, my DVD drive refuses to read DVD - he spits just them out after a while. Second, my internet connection is de-energized regularly - only goes 'local'. I have to unplug the connection and then reconnect to make it work.
-
Airport utility requires "device password"?
While trying to install on my iPad airport utility I wonder the "peripheral" password (' which may be different from the network password"). I tried the network password, but it wasn't the right one? What is the password for the device?
-
This error occurs when my headset will automatically connect to the system. My hands free kit tells me that the computer is connected, and then this message appears. Signature of the problem:* The problem event name: BEX* Application name: TosBtHsp.e
-
HP 15-f004wm My laptop allows a 8 GB RAM SODIMM DDR3L-1600 1.35v? Because essentially says it's compatible, but I can't make it work. Every time I put in and turn on my laptop nothing happens another that the sound of the hard drive not turn the scre