How we configure ESXi 5.1 and FreeBSD use VMXNET 3?

Similar Questions

• How to configure a FTP server and the web and integrate with 5.2 DMM

  Hi all...

  I need to set up an external server only for publishing content to reduce the overhead of the DMM server.

  can someone guide me on how to configure the external server and it intergrate with the DMM 5.2

  Thank you

  semuthu,

  
  

  Notes from the Release Notes:

  
  

  Limitations of compatibility with Microsoft Internet Information Server (IIS)

  DMP who use firmware version 5.2 is compatible with a single version of Microsoft Internet Information Server.

  This supported version is IIS 6.0 for Windows 2003 Enterprise Edition. If you do not have the support for IIS version but

  want your DMP to recover the assets of a Web server, we recommend that you use Apache instead of IIS.

  
  

  
  

  I suggest to use Apache instead of IIS for the Web Server service. IIS can be used as FTP if necessary.

  There are a lot of Documents on the Internet concerning the implementation of Apache and FTP servers.

  
  

  Using Apache with Microsoft Windows

  http://httpd.Apache.org/docs/2.0/platform/Windows.html

  
  

  Quick HOWTO: Ch20: Apache Web Server

  _ http://www.linuxhomenetworking.com/wiki/index.php/Quick_HOWTO: _Ch20_:_The_Apache_Web_Server

  
  

  Once the Web server is configured and operational. You simply record your multimedia content on the Web server

  and then have your DMS assets in the library using an external URL address for its location.

  
  

  If you want to use the external server for other features in the DMM, you can see how to set up

  here:

  
  

  http://www.Cisco.com/en/us/partner/docs/video/digital_media_systems/5_x/5_1/DMM/user/guide/DSM+ETV.html#wp1073210

  Goto the section just below the CNSC & WAAS...

  
  

  If this answers your question, take the time to mark this

  discussion answered & rate the answer.

  
  

  Thank you!

  
  

  T.

  
  

• After installing the package of added value: how to configure the keys 1 and 2

  Hello
  After a new update of added value package, I can't use the 1st and 2nd (model 6 buttons). Anyone know how to configure this 2 buttons.
  The path that is explaind Toshiba does not.
  Thanks in advance.

  What you can try is to start Support Button from Toshiba and reconfigure two buttons. If you don't find that this tool please let me know. I'll help you.

• How and where should I go to find out how to configure my joystick so I can use the joystick to use the flight simulation game that I bought from microsoft?

  I can't find out how to configure my joy (attack3) stick to play Flight Simulator. I don't want to use the keyboard on my computer to steal the game... Where can I find the instructions on how to configure and use the joystick?

  Hello

  1. what happens when you connect the joy stick?

  2. do you get an error message?

  3. what version of Windows are you using?

  Perform the steps mentioned below and check if that helps:

  Step 1:

  Flight Simulator x: using a gamepad

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=16624

  Step 2:
  Usually, vista Windows 7 will find and automatically install the necessary drivers when you plug your game controller into your computer.

  (a) connect the joystick to the USB port via the adapter.

  (b) see if it is detected.

  (c) Windows should recognize the new hardware and set in place to work properly.

  If this isn't the case, install the relevant drivers for gamepad for the manufacturers Web site.

  Step 3:

  I suggest the following steps and check for the device.

  1. in Control Panel, open game controllers. To do this, use one of the following methods:

  a. click Start, typejoy.cpl in the Search box and press ENTER.

  2. click on your game controller, and then click Properties.

  3. on the Test tab, test the game controller to verify functionality.

  Here is the link:

  http://support.Microsoft.com/kb/831361

  I hope this helps.

• How to configure cleanmgr for research and the removal of all?

  I usually find temporary file names in the world, such as D9CD9100 without any extension and would like to know on how to set cleanmgr to find and remove it for C:, D:, E:, and F: drives?

  Setting the clearmgr, I would like to know on what kind of option must be selected to remove the D9CD9100 file under the different directory.

  c:\windows\system32\cleanmgr.exe/DC /sagerun: 1

  

  Does anyone have any suggestions?
  Thanks in advance for your suggestions

  Hello

  You cannot delete specific files one by one using cleanmgr and there is no setting to remove the file manually.

  Check out these links for more information:

  Description of the disk cleanup tool.

  How to automate the disk cleanup tool in Windows XP and Windows 7.

  Let us know if you need more assistance.

• How best configuration connect display server and composer to limit the single point of failure?

  Hi all

  
  Just had a few quick questions:

  1.) how everyone is to limit the Connectoin Server view to a single point of failure.  All the reading I did looks that everyone puts in place two servers connectoin and doing DNS round robbin on it or put two servers behind a load balancer connection

  (2.) what happens if the mode to connect to the server disconnects while users are connected and actively using desktop computers?

  3.) how to protect View Composer of single point of failure.  It seems that most people are installing this on there vCenter server and everything by leaving it with VMware HA.

  (4.) what happens if View Composer breaks down and you have Active Desktop sessions used by users who are linked clones

  (5.) what is the login used for replication partner server view?  This is a new feature in display 6 that creats a form any cluster to the login server?

  
  Let me know,

  
  Thank you

  1. Yes. Need a load balancer. Something better than a round robin DNS since those who go ping (response from the host)-based and not necessarily whether the service is in place (port 80/443 replying with 404)

  2. the user disconnects. When the reconnection that they continue where they left off.

  3. just about everything. Also ensure that regular backups are performed by the login server. Don't forget that if you need to restore, to restore a backup SQL composer both AD LDS.

  4 should be fine. The only problem is during commissioning, a linked clone or create a delete. Then could be a problem. Updating should be ok

  5. a replication partner? Do you mean the replica server? It's just an identifier during the installation as to whether, during the installation of the connection to the server, create you a new instance of the view or expand an existing one. He ends by as a peer to other servers to connect in the same instance (POD).

• How to configure WebLogic Admin Server and the managed server

  Hello
  
  I work to configure a Weblogic admin and the managed server, but fail.
  Can I know the correct steps for the installation system?
  
  
  TX.

  Good. It might be a good idea to mark this question as answered, then.

• How to configure NTP between Virtual Machines without using Vsphere Client

  I have a group of 8 virtual servers of 5.5 ESXi without an Internet connection. There are virtual machines on each of these 8 virtual servers.

  I did one of these 5.5 virtual ESXi host a NTP server by editing the file /etc/ntp.conf with below configuration and

  started the ntpd daemon. He began to take the time to its local clock, here's the output of ntpq Pei

  IP server 10.108.190.14

  ip address of the client 10.108.190.15

  Server /etc/ntp.conf

  > > driftfile/var/lib/ntp/drift

  > > server 127.127.1.0 maxpoll 4

  > > fondant 127.127.1.0 stratum 10

  | ntpq Pei

  |   refid distance st t when poll reach delay offset jitter

  | ==============================================================
  | * LOCAL (0). LIUX. 10 l 2 64 377 0.000 0.000 0.001

  Then I edited the file /etc/ntp.conf on customers with below configuration but the customer would not synchronize with the server. He

  wouldn t get response from the server. Here is the output of ntpq Pei

  Customer /etc/ntp.conf

  > > driftfile/var/lib/ntp/drift

  > > server 10.108.190.14 iburst

  | ntpq Pei

  |      refid distance st t when poll reach delay offset jitter

  | ==================================================================
  | 10.108.190.14 INIT. 16 u

  Now, when I configure NPT Client/Server on virtual machines through the Configuration Option under Option Configuration time

  in Vsphere Client everything works fine and the client and the server to synchronize with each other. I checked the file /etc/ntp.conf on both the client

  and the server and it has a couple of restrict 127.0.0.1 and restrict the lines added by default kod nomodify etc.

  So why NPT Server featured when enabled via Vsphere Client works very well, but it does not work when it is configured manually

  in the virtual servers directly.

  I was connected to a vCenter Server Appliance through the VSphere Client and enabled the synchronization of time of the NPT.

  I really need to know how to configure the NTP server without using the Vsphere Client so that I can automate the

  task by writing a python script that would connect to each virtual server and NTP Client/Server configuration.

  Any help in this issue deeply appreciated!

  Thank you!

  You can configure the ntp server without using viclient.

  Take a look @ http://kb.vmware.com/selfservice/documentLinkInt.do?micrositeID=&popup=true&languageId=&externalID=1003063

  Hope this helps

  -Assane

• How to check the CPU usage and paging using LabVIEW

  Hi guys,.

  I build an application that is used to check the CPU usage and paging using LabVIEW. How can I do?

  any help, suggestions or advice will be greatly appreciated...

  Kind regards

  Prashant

  Hello

  If you plan to build your app for Windows, you can use .NET classes. (System.PerformanceCounter), there is a simple example with LabVIEW:

  C:\Program NIUninstaller Instruments\LabVIEW 2010\examples\comm\dotnet\SimpleTaskMonitor.llb

  

  Also, you have several screws that you can use to verify information about the processor.

  

  Kind regards

• How to read the VM ProvisionedSpaceGB and UsedSpaceGB using get - view?

  Hello

  I would like to retrieve the properties of the VM ProvisionedSpaceGB and UsedSpaceGB using get - view and not get - vm.

  How do I do that?

  Thank you very much in advance!

  Kind regards

  André

  Hello, Andre-

  You can retrieve some properties of an object view VirtualMachine and then do some computed properties, such as:

  ## get the View object of this VM, with a choice few properties (faster), then select some info about the objectGet-View -ViewType VirtualMachine -Filter @{"Name" = "^myVM0$"} -Property Name,Summary.Storage |    Select Name,        @{n="ProvisionedSpaceGB"; e={($_.Summary.Storage.Committed + $_.Summary.Storage.Uncommitted) / 1GB}},        @{n="UsedSpaceGB"; e={$_.Summary.Storage.Committed / 1GB}}
  

  To just get these some properties in the call to Get-view is the smaller memory usage in the PowerShell session and much higher speed during the extraction of the View object (without specifying properties to retrieve, the cmdlet returns all properties). How does do for you?

• How to configure a network printer and network drive in Windows 7?

  * Original title: cohen * address email is removed from the privacy *.

  having trouble mapping.  naming and configuration of a network in windows 7 pro drive. I am connected via a wireless network and also try to use my jet of office of hp as a network printer I need to know how configure that as well

  Hello

  I would like you to check out the links and check if it helps the network configuration and the network printer.

  http://Windows.Microsoft.com/en-CA/Windows/create-shortcut-map-network-drive#1TC=Windows-7

  http://Windows.Microsoft.com/en-CA/Windows/install-printer-home-network#1TC=Windows-7

  http://Windows.Microsoft.com/en-CA/Windows/install-printer#install-printer=Windows-7

  http://Windows.Microsoft.com/en-in/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab3&V3H=winvistatab1&v4h=winxptab1

  Hope this information helps. If you have any questions, please let us know.

• How to configure esxi "change the time tech support"?

  Is it possible to set the time-out value to change tech support timeout in esxi?

  You can also try following command

  Get-VMHost | Game-VMHostAdvancedConfiguration - UserVars.TSMTimeOut name-value 1800

  This will put it to the negotiations 30 minuutes, above value is in seconds

  Concerning

• When I try to go to my page pintrest I get this message: {"status": "404"}. That is what this mean and how do I get to pinterest and stop using IE for the Web site

  Pintrest seems to be the only site where I get the error message: {"status": "404"}. So far all other sites developed.

  Reload Web pages and ignore the cache to refresh potentially stale or corrupt.

  • Hold SHIFT and click reload.
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Command + shift + R' (MAC)

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".
  • https://support.Mozilla.org/KB/how-clear-Firefox-cache
  • https://support.Mozilla.org/KB/deleting+cookies

• purchase of my iPhone - how to credit my account Bank and not use credit card

  Help... I would like to make purchases using my phone.  I have a balance of store that I would use to pay for my purchases and not my credit card.  How to do that?

  If your iTunes account shows a credit balance, you are connected with this Apple ID, then it must deduct that balance before the credit card.

• How to configure WPA on Aironet 1300 without using RADIUS

  I'm trying to put in place a couple of Aironet 1300 s. I want to use WPA, but I do not have a radius server. Is it possible to configure then 1300 s to use WPA with a password and not a RADIUS server? Thank you.

  Yes it is possible.  According to the Radio, you call the encryption method to use:

  algorithms for encryption tkip encryption mode

  then under the ssid:

  SSID dot11 Test

  open authentication of the

  authentication for wpa key management

  WPA - psk ascii 0 cisco1234

  Both encryption and keys match on both sides and a root bridge and the other nonroot they should meet perfectly