How to connect an old Fatar SL880 Mid-keyboard directly on a mac?

Similar Questions

• Want to 750-209: how to connect an old sound system to a new computer

  I wanted a new 750-209 and a former speaker of Cambridge Soundworks PCWorks 19th Point Surround 4 + under low voltage. There are 2 connector; Left and right who are article 3 (each take manages 3 drivers). The envy has 1 output. It seems that I need a derivation ending in female connectors.

  My question? How to connect the two? Is it still possible? I'd hate to have a decent sound system of junk. My needs are basic - just to be able to listen on AOL or YouTube.

  Any ideas on how to accomplsh my goal.

  Just to close this debate; unfortunaely the quick response has not responded to the problem. BestBuy has suggested that I try a composed of derivation of a shot and 2 containers. Finally, I got the system works 'after' discovery that the enormous power brick disliked the new arrangement of power when I replaced the old computer with the desire. I had to replace an adapter 3 - wat and consolidate the brick. A lot of noise to get her old system to work but now I have the choice of speakers or headphones driven by a hold on a HDMI monitor. All's well that ends well. Thanks for the interest.

• How to connect my old HP printer on my new laptop

  I have a HP LaserJet 1100 printer, and I want to connect it on my laptop satellite. I can´t find witch cable to use, if any?

  Hello

  I guess your printer takes only supported a parallel port and uses the parallel cable, but you do not find these ports on the Satellite. Am I wrong?

  Well, my old printer DeskJet 840C uses the same cable that your and I had the same problem with my newest Satellite phone. My old laptop supports the parallel port.

  However, I just bought a USB-> parallel port adapter and it works. But I recommend to test the adapter first because not all working correctly.

• How to connect an old 23 "Cinema Display to a MacBook Pro 15 inch with Retina display

  I have an old 23 "Cinema HD Display, part number M9178LL/A and want to connect it to a recent MacBook Pro 15 inch with Retina display 2104.

  The Cinema Display has a power adapter and 3 USB, Firewire connectors and a DVI (think that's what it's called).

  The MacBook Pro has USB, Thunderbolt, and HDMI ports.  I have a crush on Firewire adapter, but I don't know what I need to plug the DVI or if it will work.

  I also remember that years ago Apple sold "docks", so that you can use your laptop with a keyboard and a standard monitor.  Is this always the case?

  If anyone can help?

  Thank you very much.

  Adapt you the Thunderbolt computer monitor DVI connection (use a Mini DisplayPort adapter) or HDMI port. USB and FireWire connections are only needed if you plan to use the screen as a hub.

  (138898)

• got a new router how to connect my old again router Extender?

  My ISP has given me a new router. How can I connect my EX2700 existing to the new router extender? I tried just acting as if there had been no previous router, but it did not work.

  Resetting the Extender.

  Then Configure the extension once more.

• How to connect a Hi-8 video composite RCA camcorder to a mac mini to 2015

  How can I connect a Hi 8 RCA composite analog video camcorder for my mac mini to 2015?

  Something like should work for the resolution of your camcorder.

  https://www.Amazon.com/Elgato-video-capture-analog-iPhone/DP/B0029U2YSA

  http://www.Quill.com/STARTech-s-video-composite-to-USB-video-capture-cable-TWAIN - mac-support-black/cbs/51295724.html?hid...

  You can get more expensive Thunderbolt capture devices

• How to install my old favorites and passwords in this new laptop Mac?

  I'm starting with a new installation of Mac OS X, 10.11.6, on a new partition and reinstall all software. I would like to transfer the files to my favorites and passwords in the new version of Firefox. Someone would tell me please what files I need to reinstall my passwords and bookmarks. We know that it is in the User/Library folder that I have access to. I'm pretty advanced. I just need to know what my old FF file transfer files in this new file FF.

  Thank you in advance for your help!

  key3db and logins.json : these are the password files. Copy the two!

  https://support.Mozilla.org/en-us/KB/recovering-important-data-from-an-old-profile

  https://support.Mozilla.org/en-us/KB/back-and-restore-information-Firefox-profiles

• Need help to connect the old Windows XP to new wireless router, please

  Hello
  I have an old desktop running Windows XP Edition family 2002 version, which has been connected to a Netgear WG311 802.11 wireless router g. I was unable to connect to other computers, so I replaced the Netgear with an E1200 Linksys wireless router. Now, all other computers find the Linksys router, but the older Windows XP desktop will not (because I don't use it to configure the router?).  How to connect your old computer to Windows XP to the new router, please? Thank you very much for your help.
  Walt

  Hello
  I have an old desktop running Windows XP Edition family 2002 version, which has been connected to a Netgear WG311 802.11 wireless router g. I was unable to connect to other computers, so I replaced the Netgear with an E1200 Linksys wireless router. Now, all other computers find the Linksys router, but the older Windows XP desktop will not (because I don't use it to configure the router?).  How to connect your old computer to Windows XP to the new router, please? Thank you very much for your help.
  Walt

  The problem is probably that the Linksys E1200 is a wireless-N Router and your former Office no doubt has a wireless adapter that is only capable of wireless-G (or perhaps Wireless G and B).

  Are adapters wireless in your other computers wireless - n?  If so, it perhaps is the reason why they could not connect to your old G of Netgear wireless router.

  You can get a new wireless-N for the office adapter or configure the E1200 wireless g available.

• M553DN: How to connect printer Laserjet M553DN to Wifi? -(Jetdirect accessory 3000w is already installed)

  Any help is appreciated.

  This printer was designed to be connected to the internet via WIFI.  The printer is not close to a LAN to be connected via a network cable.

  I bought the JetDirect 3000w accessory to allow the printer to have wireless connectivity.  The JetDirect 3000w accessorry is physically installed and I've activated 'Wireless Direct' via the control panel of the printer.  But I can't understand how to connect the printer to the WiFi.

  I looked everywhere in the network printer Panel, safety etc. but can not find the place where or how to connect the printer to the Wifi using Direct wireless.

  Any help is trully appreciated.  Thank you.

  Hello

  The Jetdirect 3000w feature:

  http://WWW8.HP.com/us/en/products/print-servers/product-detail.html?OID=8362161#! tab features =

  It will not connect your printer to your wireless network because it only deploys wireless direct printing. And it looks like you can only configure to use direct printing:

  http://support.HP.com/us-en/document/c04762612

  Kind regards.

• How to connect a MIDI instrument to Satellite L300

  Can someone tell me how to connect a MIDI instrument to a L300 laptop.

  Thank you

  First check if this connection is possible.
  Check the ports/jack in the MIDI instrument and ports/jacks on the Satellite L300.

  If the necessary ports are not available on the L300 then you need to buy external devices that provide these ports or you won't be able to connect such MIDI instrument.

• How to connect old router to router new

  I have a dvd player internet which can connect only through a wired connection but my router (verizon wi - fi modem) is in another room.
  I was wondering how I can connect my old router (e2000) wirelessly to another room? Would I have set up as an access point?

  blazex4 wrote:

  I understand. I was wondering if the universal media without wire - ca connector will work also instead of using my old router?

  In my view, a connector of ca wireless media would only connect to a router of AC. What you can do is to get a wireless bridge and put it up as a wireless adapter for your DVD player. The wireless bridge to connect wireless to your router and you can wire your DVD drive to the bridge. To do this, I recommend WES610N (Dual-Band N/entertainment deck with 4 switch ports) Linksys.

• I need to get data/files from my old hard drive that won't start no-how I connect it to my new computer?

  I have a new computer with Windows Vista.  My old computer does not start (lights turn on but just spinning noise that nothing appears on the monitor).  I need to get the data/files from my old hard drive.  Can I connect the old drive to my new computer to access the files?

  Connect the older hard drive to your computer and transfer the content:

  How do I add an additional hard drive
  http://www.WikiHow.com/add-an-extra-hard-drive

• How to remove the old key wifi Windows 7? It is automatically to connect to the old key... If I delete also the same old key is coming.

  How to remove the old key wifi Windows 7? It is automatically to connect to the old key... If I delete also the same old key is coming.

  How to remove the old key wifi Windows 7? It is automatically to connect to the old key... If I delete also the same old key is coming.

  Here you go:

  1. Control Panel
  2. Network and sharing Center
  3. Manage wireless networks.
  4. Right click on the wireless network unwanted.
  5. Delete

  Also note that since there is a network problem, a Forum that focuses on networking would be a better place to ask this question. This forum addresses issues of Windows security.

• How to connect new IMac to old IMac to transfer files?

  I need to plug my June 2010 IMac in a new IMac 2016 to transfer data.  What cable do I and what ports should I use to connect?

  Thank you.

  Gina

  You can do it with an Ethernet cable (and on two Macs Ethernet ports) and use file sharing.  You can also connect via WiFi, but the transfer speed will be slower.  If both Mac connected to the Internet via a common router, you already have a link between two Macs.  Here is information on file sharing

  How to connect with the file sharing on your Mac - Apple Support

  There is also an automated tool called Migration Wizard, if duties are not suitable for your task

  Move your content to a new Mac - Apple Support

• I didn't ask... where Firefox stores my favorites... I asked... How can I delete old bookmarks

  How can I delete old bookmarks

  See-> https://support.mozilla.org/en-US/kb/Deleting%20Bookmarks

  Other info of bookmarks and links-> https://support.mozilla.org/en-US/kb/how-do-i-use-bookmarks

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.