How to connect Apple TV to two different amplifiers?

Similar Questions

• How to share both calendars between two different iphones

  My wife and I keep the personal calendars on each of our iPhones. We share Contacts through our main MacBook Pro, but we keep our calendars separately as our two different iPhones. My question is, we'd like to be able to see and share our calendars to the iPhone, but still keep our own separate calendars. (I hope that's clear). Is this possible and what can someone tell me the procedure to do it please. Thank you!

  Hello ovelky,

  Thank you for using communities of Apple Support.

  Take a look at the following article. It explains how to use iCloud for sharing one calendar with others. This sounds just like what you are wanting to do.

  iCloud: share one calendar with others

  Best regards.

• connectivity between 5508 and two different 4507 switches

  Hello

  I've implemented with 5508 controller which is connected to two different chassis (Cisco 4507 switches). I have some doubt about the configuration of the interface on 5508 WLC.

  How can I configure the AP Manager interface with two physical ports on different chassis?

  If I have understood correctly, we can configure the AP manager interface with a single port

  In my introduction, we configured HSRP chassis mentioned...

  Please light up on this confused concept.

  How can I configure interfaces with two physical ports on two different chassis?

  If someone could send examples of configuration, it would be very useful for me to procees with.

  Already there are request to that effect in the cisco forum, but I did not understand correctly.

  Response would be appreciated.

  Hello

  I advise you to go through the doc:

  http://www.cisco.com/en/US/docs/wireless/controller/7.0/configuration/guide/c70mint.html.

  For Cisco 5500 series controllers, you are not required to configure an interface AP manager. The management interface is as an AP-Manager interface by default, and access points can join this interface.

  HTH,

  Tiago

  --

  If this helps you or answers to your question if it you please mark it as 'responded' or write it down, if other users can easily find it.

• How to connect to workgrup the two Windows7, 8 or Windows XP

  I have a wireless workgrup with Windows XP, but some phones are windows7 or Windows8. Windows 7 or Windows 8 are not connected to the network group work how to connect the working group the two Windows7, 8 or Windows XP?

  Hi Cathy

   

  Thanks for posting your question in the Microsoft Community.

  I understand you want to know how to connect groups of work between Windows 7, Windows 8, or Windows XP. Correct me if I'm wrong.

  I will try to help you in the matter of fixing.

   

   

  Please follow the steps described in the links below and check the issue.

  Networking of computers running different versions of Windows:

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

   

  Join or create a workgroup:

  http://Windows.Microsoft.com/en-us/Windows-8/join-or-create-a-workgroup

   

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

   

  In the future if you fall on any question relating to Windows, please do not hesitate to post your request here on Microsoft Community, we will be more than happy to help you.

   

• How to track the message to two different queue using jms proxy service

  Hi all
  In my project, I need to listen to a jms queue, then forward the messages to the queue of two different.
  Now, I already have a proxy for listening to the queue and then pass it to another queue using business service, it works.
  But how to forward messages to two different queues in the same workflow process using a proxy and bs?
  
  or in any other way?
  
  Really thanks in advance.
  
  Kind regards
  
  Kahlil

  You can use actions to publish in the pipeline to achieve this.

• I have two hard drives in My Book connected to my PC. It does not recognize the two. How can I change them to two different numbers in the car?

  I want to transfer information from one to the other

  What did you do before?

• How to send a contact to two different program step

  Hello

  I have a program where I need to send a contact to two paths different program (series of steps and conditions).

  If condition "product = A" is true then go to step 100 (101,2,3) and 200 (201,2,3)

  Otherwise, go to step 200 (201,2,3)

  Please let me how can know I do this?

  Thank you

  Rama

  A contact can only be once in a program, there are 2 options here.

  (1) you can have flow path for steps 100, 101, 102, 103, etc and then at the end of this journey, send them to step 200 and pass them around this way here.

  (2) divide these 2 channels into 2 programs. Before step 100, you can add a step to 'Add program' (check that you do not move to the program, which will remove them from the current program), and have steps 200, 201, etc in a post-secondary program. In this way they can scale down the two paths at the same time, since its 2 different programs.

• How to connect Apple TV in again internet new home?

  Responsible for Apple TV works well in the old House now in the new House and not allowing me not not in the settings to connect to the wifi only showing me landscape landscapes

  The landscape is the screen saver.

  Restore the Apple TV to factory settings. Instructions here > restore your Apple TV to its factory settings

  Then configure the Wi - Fi > help with Wi-Fi on your Apple TV networks

• How to connect Apple TV to a laptop via hdmi

  I tried to connect the Apple TV to my laptop HP Pavilion PC training and it will not be displayed on the screen. I want to know if I need to install any drivers or if it won't work at all.

  I think the HDMI is for output is not the entrance. So, you will need something else with HDMI top. Connect the AppleTV

• How to migrate the relationship between two different epm versions.11.1.1.4 - 11.1.2.3

  Hello, we intend to make an hors-place upgrade to our 11.1.1.4 to 11.1.2.3 environment. The only thing stopping us is the question of how to migrate 11.1.2.3 11.1.1.4 reports. We have already considered the following options
  
  (1) LCM, LCM is taken in charge only between the same versions are at - it another way.
  
  (2) I know there is an option to export reports in the workspace, but the disadvantage that is that each report must be exported at the same time (atlease how it is in 11.1.1.4). And we have far too many reports to make them one at a time.
  
  (3) I have also considered the possibility of replicating data in the repository Directory (HYPERION_HOME\products\Foundation\workspace\data\RM1_Servername) of 11.1.1.4 to be used as the repository directory in the new version, assuming that reports and data analysis means the reports too. However after doing this I have connected to the new environment and could not see any of the reports.
  
  What other options are there to migrate the reports. Help, please.

  Teddd wrote:

  JohnGoodwin wrote:
  No need to delete tables as databases configured on the vesion as well, if you go to the bottom of the road upgrade data replication then select "Upgrade existing to the current version of 11.1.1.4 databases" when not to configure the database.

  Thanks for the reply of John, I looked at this option. But if I select this option if it does not affect the current 11.1.1.4 environment? Because it is an output level on the spot and we will be maintaining the old environment until we get the new environment to match the old. Thanks again.

  Clone the existing 11.1.1.4 databases, point to the clone.

  Documentation that should be studied - + "You can reuse the data and the existing database, or replicate the database and data to a new machine." +

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• How to install Flash Player on two different browsers?

  Have a PC of 32-bit Windows Vista with the two browsers: IE8 and Safari. Flash Player, already installed on IE8.

  I want Flash Player to work on the browsers and fear that install Flash on Safari drive will mess up the drive Flash on IE8.

  How to proceed?

  Thank you

  Marty

  Problem solved!

  Created a Restore Point system and boldly charged before.  Using the Safari browser, I open the Flash Player download page and installed the version of Safari.

  The Flash Player Plugin for Safari installed correctly with zero negative impact on Flash Player IE8.

  I was too careful... my concerns were unfounded.

  Marty

• How can I make my logo two different colors? I know that sounds simple

  I just want the half black and half white since im doing a two shirt.

  The shape of the eyes is first a compound path. Then put a black rectangle behind it and mask it with the shape of the eyes. Direct, select the mask and make it white.

• How to connect a button in a different IPG IPG?

  I created a slide show that contains a button that must be connected with an another MSO, which appears like a window pop up and contains another element that has one overlay: pinch & zoom. Is this possible to do?
  Somehow the program I cannot choose between 2 OSM in an article (DP).

  Can you help me with a tutorial?

  Thanks in advance!

  Buttons in an MSO can not control other MSO.

• Corner of mitre of two different line thicknesses

  Can someone advise please how to clean a corner with two different line thicknesses? When I Zoom lines mitre not as you wish, they both just to finish. The lines are a 10 PT and pt 2, drawn at the intersection at 135 degrees.

  Thank you very much

  Because they are not connected and have different stroke widths you can not get an angle.

  Convert the path traced thick contours (object > path > Outline Stroke) and adjust the end.

• Reports from two different domains

  Hi all
  
  Is it possible to account for two different subjects areas, i.e., a report that contains fields from two different areas? If so, how could we select fields from two different disciplines in a single report of responses?
  
  Thank you!!

  One thing to understand is that if you're imagining having two areas (SAs) poster and then by dragging the columns of each in your application without any preparation, then no, that cannot be done. You would need to make a join in the MDB layer and expose the column of the second subject area in the presentation layer.

  But if you indeed interested in UNION (or cross) queries, then do this:

  Build your first application in the first SA in the usual way. Note the number of columns and the data types of each column.

  Now at the bottom of the workspace of criteria, there is a button called "Combined with application similar." Until it clicks.

  Select your second. You will notice that the contours of the columns in your first query appear. This is to remind you that the number of columns in this second query must be the same as in the first. It also shows the data type of each column for the same reason.

  Once you select your columns and your filters, click result. (Oh, you need to decide what kind of combination you want - click the menu drop down.) The result will be a new application that has data from two SAs in the query and combined in the way you select (union, intersection, etc.)

  This should give you a start.

  They are now, some 'useful' or 'correct' points for users on this thread...