How to connect deskjet 3050 a network without a computer, just an ipad

Similar Questions

• How to connect on windows and stay without the computer back to connection

  When I login to windows 7 everything working, I can stop to read the reference books or leave my desk momentarily, period during which the screen will return to the login page of windows so I have to get my password again.  How can I stop this happen by changing a few settings?

  Hello:

  Go to your appearance and personalization in the control panel section.

  In the first section of personalization, click change screen saver.

  Uncheck the box that says "On Resume, logon screen."

  Paul

• How to connect my phone I have with my computer

  How to connect my phone I have with my computer?

  Hello

  Try the Apple discussion groups

  https://discussions.Apple.com/community/iPhone/iphone_hardware?view=discussions&tagSet=1181

• How to connect the printer wireless hp with the computer?

  * - Original title - the printer printing

  How to connect the printer wireless hp with the computer?

  HP all what you need to be able to complete the task... See here...

  http://h71036.WWW7.HP.com/HHO/us/en/EP/articles/Wireless-Setup-Wizard.html

• 2 PC XP and a new Windows 7 pc + 1 Hub Intena - how to connect to a wireless network?

  I have 2 PC with Windows XP and a new one running Windows 7, but unable to connect them so that they run all on a home network. Connection Internet is via a hub Intena broadband.

  One of the XP PC can not even connect to the internet.

  What should do? Any help is appreciated...

  PDW

  Hello

  To check the PC that cannot access the Internet read this page, http://www.ezlan.net/wireless.html

  ------------------------
  Sharing.

  Maybe this can help.

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Homegroup = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Network of home or work = fundamentally similar (and better) to the previous Working Group sharing methods which allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  To get best results connect to each computer system screen and set all the computers to be on a bearing the same name of Working Group , while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall, AV, or other security components allow free local traffic on all network computers. If you use the 3rd group of security, firewall native Vista/XP must be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please Note that some 3rd party software firewall/AV/security costumes continue to block aspects of the Local traffic even it they are off (off). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic.

  If you end up with the 3rd party software uninstalled or disabled, make sure that Windows native firewall is active .

  ------------------------------

  Network Win 7 with another version of Windows as a work network (works very well if all computers are Win 7 also).

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040

  In Win XP Pro with simple sharing Off, you can visually see the Permission/security level and set them up at your convenience.

  http://www.Microsoft.com/windowsxp/using/security/learnmore/AccessControl.mspx#securityTab

  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have permission and security issues with Vista/Win7, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . All the users who are allowed to share need to have an account onall computers that they are allowed to connect to.

  Everyone is an account, that means a group of all users who already have an account now as users. It is available to avoid the need to configure permission for each on its own, it does not mean all those who feel that they would like to connect.

• How to connect to a hidden network

  I am trying to connect to my wireless internet home, but it is hidden.

  How do you find a hidden network to connect to?

  Hello Virginia,.

  Thanks for posting on the Microsoft answers Community Forum.

  Access points (APs) or hidden non-broadcast wireless network wireless do not broadcast their Service Set Identifier (SSID). Because non-broadcast networks wireless access points do not broadcast their SSID, they do not appear in the list of wireless networks that are available by default on clients based on Windows wireless. As a result, users need know the SSID and create a preferred wireless network with the SSID of the other network broadcasting. After that the preferred wireless network has been created with the identifier SSID is correct, the ease of wireless in Windows Automatic Configuration will be able to connect.

  
  You must contact the administrator of the hidden network and find the SSID before connect you.
  http://TechNet.Microsoft.com/en-us/library/bb726942.aspx

  I hope that answers your question. If please reply back and let us know if your problem is resolved or if you have any other questions.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• All the networks, when connected, display an unknown network without internet access.

  I have a laptop windows 7, and all recently internet my laptop has stopped working. Each network I want to connect to always says that he is an unknown network and that it is connected but has no internet connection. Anyone know what could be causing this? I can't update my drivers, as I do not have to download it from internet. One of my friends recently tried to configure something to its WiFi network via my computer, something in this direction, pourrait it screwed my computer somehow?

  Hello

  Thank you for contacting Microsoft Community.
  Perform the following steps in order:
  1. click on start.
  2. type network and sharing Center , and then press ENTER.
  3. in the left pane, click on change the parameters of the map.
  4. Select the network adapter appropriate (wireless or wired).
  5. right-click on it and click on Properties.
  6. in the Properties dialog box opening, networking, tab scroll down until you see Internet Protocol Version 4 (TCP/IPv4).
  7. select it, and then click Properties.
  8. in the dialog box, select IP address get automatically and DNS server automatically get an address.
  9. go to the next (alternate Configuration) tab.
  10. Select automatic private IP address.
  11. click on Ok.
  12. click on Ok.
  13. repeat the steps for WLAN and wired connections.
  14. now, try to connect to a network and check.
  If the problem persists, click Start-> type cmd-> press ENTER. Type ipconfig/all, press ENTER, and then provide the information displayed there.

• HP deskjet 3050 a series: during the analysis of my printer HP Deskjet 3050 a I get the COMPUTER NOT FPUND message on my printer

  When I scan from my HP deskjet 3050 printer has series, I get a message on my computer printer not found. If I connect the printer on my computer I can scan from the printer. Scan doctor tells me that there is nothing wrong with my printer.

  Hi @eightysecond,

  Welcome to the HP Forums!

  I understand that you cannot scan to the computer of your HP Deskjet 3050 a on Windows 7. I'm happy to discuss this issue scan for you!

  Please take a look through this guide, a "computer not found," "No computer detected," or "connection error" message for HP Deskjet 3050 has e-all-in-One Printer Series.

  Hope this guide to solve your problem and have a nice day!

• How to connect the digital camera Canon PowerShot A200 computer

  How to connect canon powershota200 to the computer (windows 7 32 bit)?

  Your options include the use of the USB cable provided with the camera or you can remove the SD card from the camera and insert it into an SD card reader if we're a part of your computer.

  If you are using the USB cable, the device should appear in devices and printers (Start menu), and browse the camera and copy videos or images from the camera. This can also be done via Windows Explorer.

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-get-pictures-from-my-camera-to-my-computer

• How to connect a scanner of network including the Windows 7 firewall is blocking and adding an exception for the associated program to access the scanned files has no effect?

  Hello

  I have recently upgraded to Windows 7 and the process for adding some of my old material has been an interesting question. Who made me stuck is to be able to access my network scanners "mailboxes shared" in order to recover my scans.

  The product in question is a large format Xerox 6204 printer/scanner. The installation process for the basic print server run the 6204 as a network printer went relatively smoothly and seems to work as expected. However, the problem arises when I want to use the functionality of scan of the 6204. Scans are stored in mailbox store ' ' on the 6204 and must be retrieved by a piece of software Xerox called "wide Format Scan Service. This program essentially connects to mailboxes mailbox via the IP address of the 6204 on the network and from there should allow me to download the scans on my Windows 7 computer. Unfortunately, in order to connect to the mailbox store I am currently disable the firewall of Windows 7 altogether.

  I tried to add the Service to Scan large Format to the list of allowed programs, which gives an "impossible to connect to 6204' error. I tried to add the program to inbound and outbound rules manually, even though my experience with this is limited, with the same error. So leave the default settings in the wizard, I also tried to use the technical netstat to find out what are the ports, the software used and adding them to specific ports in the properties of the rules - all without success.

  For now, I'm stuck the point of having to run my installation of Windows 7 without a firewall to use my scanner large format, which is obviously an undesirable situation. If anyone can offer help or advice on how I can solve this problem it would be greatly appreciated.

  Try this... This solves the problem

  netsh advfirewall set global disable StatefulFTP

• How can I get my USB to the printer wirelessly to a network without a computer?

  If you have a USB port to the wireless printer and no computer to use software to do this and do not want to use the WPS option (or it is not available), then the following method can help.

  That doesn't get a key USB Wi - Fi, as the printer Deskjet 3512, on the wireless network when there is no computer available.  However, this can work from a computer as well if you prefer not to install the software.

  For these steps, I'll use an iPad.

  1. the printer will broadcast a wireless network of its own.  This has usually HP Setup and model of the printer in the name of the network.  Connect a wireless device to the network.

  2. Once connected, open the browser.  In my case, it's Safari.

  3. Enter the 192.168.223.1 address in the address and press go to access the status of the printer page.

  4. once there, there will be several tabs at the top.  Select network.

  5. Select the wireless configuration wizard.

  6 Select next at the bottom.

  7. it looks for available networks.  Select your network from the list and click Next.  The network should be highlighted, select it again if it's not.

  8. you will be asked the password.  Enter the password and click Next at the bottom.

  9. the printer should now be connected to the network.  It may take a few minutes to share.  Reconnect the computer or mobile device to your regular network and it should be good to go.

  I know that there are some users who have only a Tablet and a USB port to the printer wireless with no other way to get it on a network.

  I hope this information is useful to someone.

• Unable to connect to the wireless network without help

  2 month old laptop dv7-3162 and it has now stopped working in terms of connection to the Internet wireless. The other computers in the House connect correctly (wireless). So I know for a fact that this isn't a thing of router (my router AND the motem is an all in one device). Now, IV ' e updated my drivers for the latest drivers (only the atheros adapter wireless if it matters) and nothing to fixxed the question. He sees wireless networks, that he just does not connect to them. IV ' e reset and power cycled motem/router several times without success. A ran a windows update and several reboots.

  Thanks in advance

  He worked, all you have to do is go in the device management and wireless network card driver, disable, restart, let it reinstall, and it should work. It did in my case.

• How to connect two systems using network flow

  Hello

  I am trying to send data to a connected to another system on the same subnet. I do this by using network stream, but the connection is not established, I don't know if there is a configuration that I need to do. Can someone please look at this.

  Thank you

  You get an error?... Are you able to ping between two PCs?

  Have you checked your firewall settings?

  [Edit]: did you give the ip of the target in view vi?

• can I connect my hp cp1518ni network without using a ethernet cable?

  Can I connect wireless, or I have to use an ethernet cable?

  Hello

  Based on this, your printer is not ready to network, it uses the USB port so adding component (wired or wireless) network may cost more to buy a new printer. A cheaper option is to purchase a wireless as one of theseprint server.

  Kind regards.

• How to connect to the account administrator without password reset disk?

  Original title: How can I reset the password without iso disc?

  I am the administrator on my PC, with a second windows profile that is not password protected. I used to write down of my password every time I have to change, but this time I don't have. I went through dozens of passwords I would use and still not recalled it. My PC came with 7 is already installed and I have no backup disc 7. How can I get my account? I already tried to command prompt and it was unnecessary.

  I already tried to command prompt and it was unnecessary.

  What is the value of a password if you could get around it with a simple command console?

  Since you are obviously the owner of the PC, you can reset the password to its previous value as follows:
  1. Set your BIOS so that it uses the DVD drive as its primary boot device.
  2. Start the computer with your Windows 7 repair CD.
  3. Press a key when prompted to boot from the DVD.
  4. Select 'PC Repair' in the menu.
  5. Select 'Repair' when prompted.
  6. When you are prompted, select System Restore.
  7. Configure Windows to a point before you changed the password.
  8. Plan ahead a little and create, test and document an alternative admin account, same as you have a spare emergency House key. This will save you a lot of trouble.