All the networks, when connected, display an unknown network without internet access.

Similar Questions

• How to create network without internet access

  I have three devices: air mac, mini ipad and iphone OS. but I can't access the internet.

  How can I create a network without internet access?

  Maybe I just need another router, but sometimes, I just take my mac and iphone. It is impossible to get the router with me everywhere.

• problems connecting to the wireless network - the network (no internet access) proxy setting

  Former title: yellow triangle wireless

  My computer can connect to the wireless router but cannot connect to the internet. I try to connect with the ethernet with cable modem connection & it still does not work. The other laptop works fine but my does not.

  1. I have uninstalled & installed the network card.

  2 restart the apater modem & network cable

  3. I get 'Windows could not detect a network proxy setting.

  4. when I "Network & Sharing Center" and under "show your network activity" I get "identification."

  5. "identiyfing netgear" below said 'no Internet' when you are connected to netgear

  Windows IP configuration

  The host... name: Jeffrey -.
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.

  Wireless Network Connection 2 wireless LAN adapter:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft Virtual WiFi Miniport adapt
  Physical address.... : 1C-65-9D-BF-E2-BF
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. :
  Description...: Realtek RTL8188CE WLAN 802.11n PCI-E NIC
  Physical address.... : 1C-65-9D-BF-E2-BF
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::cc8f:f2cd:dd7c:ccd1% 17 (Preferred)
  Autoconfiguration IPv4 address. . : 169.254.204.209 (Preferred)
  ... Subnet mask: 255.255.0.0.
  ... Default gateway. :
  DNS servers: fec0:0:0:ffff:1 1%
  FEC0:0:0:FFFF:2 1%
  FEC0:0:0:FFFF:3 1%
  NetBIOS over TCP/IP...: disabled

  Ethernet connection to the Local network card:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  Description...: Realtek PCIe FE Family Controller
  Physical address.... : 1C-75-08-73-8F-F1
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Tunnel adapter isatap. {342574F9-0D0B-4337-B59D-E7373E959066}:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft ISATAP adapter
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Tunnel adapter isatap. {25F2C90C-9E95-491A-BDFC-4F4CDA2FE33D}:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Adapter Microsoft ISATAP #2
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 12:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft 6to4 card
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Teredo Tunneling Pseudo-Interface:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Hi istraight1,
  a few steps, I recommend you to see exactly what this question:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  and
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/Windows-could-not-automatically-detect-this/d243dea1-d1c8-4C4A-ba96-2b49bc9bab1a?TM=1338167520088

  and finally:
  http://social.technet.Microsoft.com/forums/en-us/itprovistaprinting/thread/548ca07e-F04E-4973-8719-8c09959f1ca6hope this helps.
  B Eddie

• I keep getting the "this connection is not approved" in all the sites when I use Firefox on windows laptop 36.0.1 8. How can I overcome this.

  I keep getting the "this connection is not approved" in all the sites when I use Firefox on windows laptop 36.0.1 8. How can I overcome this.

  Hi vijaysampath, please make sure first that the date, time, and time zone are set correctly on your system. If this does not solve the problem (or it is already set correctly), a possible solution depends on different factors:

  • What is the error code indicated under Technical Details on the error page?

  in case the error code is equal to sec_error_unknown_issuer, please try to add an exception on the bottom of the error page to verify the certificate, as shown on the attached screenshot:

  • What information about the issuer of the certificate contain?

  Please take these two pieces of information. Thank you!

• I want to have the screen all the time when I load

  When I use the iPhone 6 (latest OS) I want to have the screen all the time when I use it in the car with the card program.
  I know that it can be programmed to "Always on", but I want the screen to be closed after 2 minutes if you use the battery.

  What I need to change those settings whenever I use it in the car?

  janbso wrote:

  When I use the iPhone 6 (latest OS) I want to have the screen all the time when I use it in the car with the card program.
  I know that it can be programmed to "Always on", but I want the screen to be closed after 2 minutes if you use the battery.

  What I need to change those settings whenever I use it in the car?

  Yes.

• When I click on all the files I get an error message says "without this user supported interface.

  When I click on all the files I get an error message says "without this user interface supported 'n I can't open any files or folders.

  A moderator is spent it to search in the Forum, the folders and files Windows of Feedback Forum.

  HI, Luvnmidlife,

  Windows operating system?

  It is the unique user on the system account?

  Create a new account to use for testing purposes.  See if the problem persists using the new account

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

• Is it possible to speak with a technician if I am using Dial-up Internet? It seems that I waited more than an hour while trying all the time to connect.

  Is it possible to speak with a technician if I am using Dial-up Internet? It seems that I waited more than an hour while trying all the time to connect.

  original title: Online Tech Support

  Hi Cindy,.

  No, unless you have a second phone line, using a cell phone, or try something like Skype on your computer.

  Try to connect to what?  Technical support for what?  Of course, you could connect here, so it works.  What is the problem that you are looking to get help?

  I hope this helps.  If we can help, let us know.

  Good luck!

• Video OK but sound does not go to the TV when connected HDMI on HP Mini 311 with XP.

  Video OK, but the sound does not go to the TV when connected HDMI on HP Mini 311 with XP. Has anyone experienced and resloved this issue and can share with me.  The solutiuon provided in the manual does not seem to apply to the Mini 311 model that we use. Help, please.

  James,

  Visit this link,

  How to get his TV using HDMI cables?

• Im running ADOBE CC 2015 on an iMac and Illustrator plant all the time when I try to use the save for web. I need to use this feature, all day and am frustrated of all accidents. Help, please.

  Im running ADOBE CC 2015 on an iMac and Illustrator plant all the time when I try to use the save for web. I need to use this feature, all day and am frustrated of all accidents. Help, please.

  Hello

  We have published a 19.0.1 hotfix that resolves this problem in discussion on this topic. Please apply the patch to your creative cloud application. The creative cloud application checks the update once a day, so you may see the update immediately.  If you want to force the check for an update at the beginning please logout and log back into the creative Cloud application.

  Link to 19.0.1 release notes: https://helpx.adobe.com/illustrator/kb/illustrator-cc-2015-crash-bug-fixes-19-0-1.html

  If you continue to see any questions send us an e-mail to [email protected]

  Kind regards

  Ashutosh

  The name of the Illustrator team engineering

• C# examples fail with "Failed to recognize the type of server or the version when connecting to the host"

  I am currently submitting work for P2V conversion from a c# application. I tried to run the application remotely and on-site, but I get this error message (here is the full error):

  "< detail > < InvalidArgumentFault xmlns =" urn: Converter ' xsi: type = "vim25:InvalidArgument" xmlns:vim25 = "urn: vim25" xmlns: xsi = "http://www.w3.org/2001/XMLSchema-instance" > < vim25:faultCause > < vim25:fault xsi: type = "ConverterNotSupportedConnection" > < hostName > RSMITH < / hostName > < / vim25:fault > < vim25:localizedMessage > impossible to recognize the type of server or the version when connecting to the host "RSMITH". " < / vim25: localizedMessage > < / vim25:faultCause > < / InvalidArgumentFault > < / details >

  RSMITH is the name of the machine with the VCenter Converter Standalone (5.0) and where I wan the VM to go. It's a Windows 7 SP1. I'm under .net 4.0 winform.

  Any suggestions? I'm pretty much run the sample out of the box, except for wrapping a winform around it instead of an application console.

  Cannot you telnet from your Converter machine on the source IDE oucederomsurlesecondport 9089 machine?

• How do you know all the username of connection system/system

  Hi all
  
  I want to know all the usernames of connection of the system that are existing as user
  
  
  concerning
  
  Srinivas

  Hello

  With the help of DBA_USERS will give more details

  select * from dba_users;
  

  Concerning

• Laptop connected to 2 ISP networks (Ethernet + wireless) - Wireless Connection shows a "yellow Triangle" - no Internet access

  I am facing a network unusual problem with the following network configuration

  1. laptop connected to isps1 via Ethernet - 192.168.0.x (serves as router NAT and DHCP)
  2. same laptop connected to ISP2 network Wi - Fi - 10.1.1.x (router does NAT and DHCP)
  3 WiFi connection shows a "yellow Triangle" - no Internet access

  Note:

  1. neither the connections require Sign-In to access the Internet
  2 Ethernet is defined on top to control configuration\reseau and Internet\Network Connections\Advanced Settings\Adapters and links
  3 operating system: Windows 7 64-bit SP1
  4. the Wi - Fi network has access to the Internet as other wireless clients can connect to the Internet using the same.
  5. here is the weird part - if I disable the Ethernet adapter on this laptop, the "yellow Triangle" - no Internet access on the wireless connection disappears and he now reports "Internet access".

  6. If I now activate the Ethernet back, connection Wi - Fi card always displays "Internet access"
  7. If I reboot, the problem returns - new shows a "yellow Triangle" wireless connection - no Internet access

  6. the question is not specific to this machine that the same issue is reproducible on another computer with 64-bit Windows 8 installed.

  This is expected behavior that has an explanation?
  I can provide more information if necessary.

  Your comments and suggestions are welcome.

  Hello Mohit,

  In this case, you may need to update your network card. Please visit the website of the manufacturer of your system and get the updated driver.

  Let us know if you need additional assistance.

• How to disconnect a network unidentified without internet access?

  My laptop running Windows 7 says I'm connected to a network not identified without internet access and allow me to connect to my wireless home connection, but there is no internet connection is.  The only way that I can use internet on my PC is if I connect my phone and use the internet tethering from there, (which sometimes is not recognized).

  Please help on how to disconnect a network not identified!

  Hello

  You can't disconnect from it.

  It's good because of the inability of the computer to connect to your network.

  It detects that there is something there, but it can connect to it.

  Assuming that it is wireless and the wireless router signal is strong, and it broadcasts its SSID (wireless network name).

  -------------------------

  These steps and tell us where is the breaking point.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  ------------------

  The wireless card drivers much also install utility wireless of the seller.

  Make sure that if there are teas from Wireless Utility of seller does not work with the native Windows wireless utility (Service WLAN).

  ----------------

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  party like Hello and NetMagic 3rd network managers can block local traffic too.

  ---------------------------

  Stack TCP/IP work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ---------------------------------------------------

  A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.

  Above everything is OK, you must be able to connect to the router.

  Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.

  If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• Unidentified network No internet access

  I had my Pavilion dv6-6c35dx (Windows 7 64-bit Edition running Home Premium) for about a month and I was the wireless Internet without any problem. About two days, whenever I start my laptop the icon network said "Unidentified network - no Internet access." But I can temporarily fix it by disconnecting it from my router and reconnect (or wiring) and I can access the Internet after that. But I find it very annoying to do this whenever I start my laptop. Before the problems started, I've changed my router with this laptop's settings. The reason why I've changed the settings of the router because I wanted my games devices to be taken in charge by the router.

  

  Hello:

  Here is the link to the latest driver for your wireless card.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-105197-1&cc=us&DLC=en&LC=en

  If, after installing this driver, you still have the same problem, I think that you can solve it by the fix below, but you will not like you only have a 54 Mbps connection.

  It is not a big problem if you transfer a large number of files to and from your PC to or from this laptop or your internet download speeds are more than 54 Mbps.

  Mine are 30 Mbit/s, and it's pretty fast.

  Difficulty:

  In Device Manager/network adapters > click your RTL 8188 > / properties/Advanced/and change mode wireless b/g/n and b/g

  Paul

• I need the Java Player for firefox on a stand-alone computer without internet access. I have internet access on another computer. How can I do this?

  I have a stand-alone computer (no internet access) with firefox to run the Java Player. I have internet access on another computer in order to download files and hover over things to the stand-alone computer to install. That do and where can I download and how I install on the stand-alone computer.

  Thank you

  Leroy

  Hi, to get the Offline Installer that you can use on the computer without internet access, please visit https://java.com/en/download/help/windows_offline_download.xml