How to connect headphones to bdvn790w

Similar Questions

• How to connect headphones to Toshiba 40L2400Ve TV

  I bought TV Toshiba 40L2400Ve, which has no Audio out. It has an Audio/video connector, USB, HDMI, and ANT.
  I can plug in my headphones to the Audio OUT of the digital satellite receiver, but that the TV is on mute. The receiver has a SCART (TV), a composite connector (video) and RF INSIDE and OUTSIDE. Also a camera digital Dolby S/PDIF output.
  Counsel for the best solution to get Audio for headphones and TV? Thank you!

  Although this model is not made for the market of the EU here is an Council: a headphones Jack is distinguished by an output jack Audio impedance point of view. Bad impedance means, audio signal you hear on your headphones may be too loud or too quiet. That's why outputs headphone exist, since they are intended for the coils of helmet of the reader with the necessary signal level. Audio outputs usual via SCART or Cinch operate at a level of 0, 7V - 1V and cannot be able to drive the headphones with the required current coil (depends on the type of helmet, the impedance, the more he will play, but also requires a source that can drive the most common).
  You can try with a simple cable Y-(stereo), driving both, the TV and the headphones, but suppose, this solution is not perfect. Finally, you will need some kind of an amplifier/receiver (helmet), which provides a separate headphone to this effect.

• Want to 750-209: how to connect an old sound system to a new computer

  I wanted a new 750-209 and a former speaker of Cambridge Soundworks PCWorks 19th Point Surround 4 + under low voltage. There are 2 connector; Left and right who are article 3 (each take manages 3 drivers). The envy has 1 output. It seems that I need a derivation ending in female connectors.

  My question? How to connect the two? Is it still possible? I'd hate to have a decent sound system of junk. My needs are basic - just to be able to listen on AOL or YouTube.

  Any ideas on how to accomplsh my goal.

  Just to close this debate; unfortunaely the quick response has not responded to the problem. BestBuy has suggested that I try a composed of derivation of a shot and 2 containers. Finally, I got the system works 'after' discovery that the enormous power brick disliked the new arrangement of power when I replaced the old computer with the desire. I had to replace an adapter 3 - wat and consolidate the brick. A lot of noise to get her old system to work but now I have the choice of speakers or headphones driven by a hold on a HDMI monitor. All's well that ends well. Thanks for the interest.

• How to connect his computer without HDM to Toshiba 40LV933G

  Hello

  I have a Dimension 5150 desctop computer and want to connect to my Toshiba 40LV933G TV.

  The computer has no HDMI output.
  I am able to get the help of VGA video cables.

  But I'm not able to get sound.
  I tried Mini RCA cable but still no sound. (cables are fine, I checked it on the installer of my friend).

  Mini is it to RCA installation cable supported in the 40LV933G of Toshiba?

  Any ideas?

  Thanks in advance.

  Hello

  First, he must know that VGA port (on your computer) does not transmit the audio signal. The VGA (RGB) port supports only the video signal.
  So if you wish to receive the sound on your TV, you must connect an additional audio cable Y from a port like jack SPDIF or headphones to your computer audio output to the TV audio IN (L, R) port.

  Find a TV manual where you can check how to connect an external equipment:
  http://www.Toshiba-OM.NET/LCD/PDF/English/Country_Specific/LV933-3240-English-specific.PDF

• How to connect the Satellite Pro P100 to Hifi

  I've got Satellite Pro P100. How to connect this laptop to stereo
  It's probably easy, but what I can say... Call me stupid.

  I have head that comes out of the headphone jack, it connects to my friendly hifi.
  Ill be there is a unpleasant hissing in the background. Trying to hook up my boys in head mp3 player, and that works very well.

  Any chance of some help... Thank you

  Hello

  To my knowledge, you can connect the satellite Pro P100 to HiFi only via a cable 2 RCA Audio Y adapter. To my knowledge the laptop doesn't support the S/PDIF audio output so you only to use an analog audio port.

  You can also buy a stereo adapter with 2 x cinch sockets to connect the laptop to the stereo. This card can be plugged into the headset jack

  Check this box:
  Stereo adapter

  I think you should visit the nearest dealer of portable. It can show you the right and taken in charge of cables and adapters.

• How to connect Lenovo IdeaPad Yoga 13 5.1 speakers?

  Hello

  I want to buy Lenovo IdeaPad Yoga 13 (with processor i7, 8 GB RAM and SSD 256). But the main problem is that I don't know how to connect to System 5.1 surround.

  Currently, I have Dell Studio 1555 with 3 audio ports, so it's very simple, but this little laptop is not 3 ports. Is there another solution?

  Thank you

  Hello

  I bought a SoundBox USB breakout on amazon widget. won't cost that a tenner delivered, entry and telephone support microphone, output headphones plus 5.1 output and optical output.

  You can spend a little more to get a compatible system 7.1, but I got it only for entries to be honest (recording/mixing of music).

• How to connect my i phone 6 to 10 on my computer windows

  How to connect my I Phone 6-10 Windows on my computer

  An iPhone will pair not via Bluetooth to a computer (Mac or Windows) with the exception of hotspot and then only if your cell phone plan he supports. See below for more information. https://discussions.Apple.com/docs/doc-7722

• How to connect to itunes for ipad airplay without using computer?

  HOW to CONNECT IPAD AIRPLAY to ITUNES WITHOUT the HELP of a FULL ❓l

  There is no need to shout. What you're trying to use AirPlay to stream content from your iPad to?

  Using AirPlay: How to use AirPlay on your iPhone, iPad or iPod touch - Apple Support.

  (I asked for your message to be moved to use iPad forum, where you have posted is for questions about the iTunes U app.)

• How to connect new IMac to old IMac to transfer files?

  I need to plug my June 2010 IMac in a new IMac 2016 to transfer data.  What cable do I and what ports should I use to connect?

  Thank you.

  Gina

  You can do it with an Ethernet cable (and on two Macs Ethernet ports) and use file sharing.  You can also connect via WiFi, but the transfer speed will be slower.  If both Mac connected to the Internet via a common router, you already have a link between two Macs.  Here is information on file sharing

  How to connect with the file sharing on your Mac - Apple Support

  There is also an automated tool called Migration Wizard, if duties are not suitable for your task

  Move your content to a new Mac - Apple Support

• How to connect a new MacBook in my time for the initial file transfer capsule

  How to connect a new MacBook to my existing time capsule to transfer files as part of the first implementation of my MacBook?

  You say that you have a new MacBook and that you have posted to the forum for the retina MacBook 12 "section, but your tag indicates that you have a MacBook Pro. Please specify.

• How to connect a drive to a 2015 iMac firewire external

  How to connect an external drive firewire to an iMac of 2015 for use with time machine?

  See love at first sight to FireWire adapter

  Apple Thunderbolt cables and adapters - Apple Support

• Portege Z30-A-189: microphone does not work with the connected headphones

  Hello
  I have a Portege z30-a-189 ultrabook.
  Today, I wanted to use Skype with a headset for the first time and I noticed that when the headphones are connected, the internal microphone does not work.
  When I connect headphones that have the microphone, it works, but I want to use headphones that do not have microphone.
  I chcecked all in windows 10 sound settings.

  If you come on a site back, you will find the solution. (see my last post - realtek settings)
  https://Forum.Toshiba.EU/showthread...-in-headphones

• How to connect two computers and LAN

  I can't get my toshiba to interface with my desktop computer or to connect to the internet via a CAT5.
  I tried everything I know.

  I'm not too sure about the LAN MAC? He just will not connect even if the device is functioning properly.

  Any ideas?

  Here are the instructions how can connect the two computers.

  -First of all, you will need to disable the firewall.
  -Then you need to set the same workgroup on both computers
  -in the Lan Card Properties-> Protocol TCP/IP settings, you must assign the IP address manually. That is, a computer must use the 192.186.50.1 ip address and the other computer must be set to 192.186.50.2.
  -MAC address is fixed and cannot be changed. Each LAN card uses unique mac address

  After these settings, you must restart the portable computers (computers)

  PS: I recommend Google for details and further instructions.

• Satellite A200 - how to connect to the TV?

  Hi you.

  How to connect my laptop to the tv with a S - video Cable Media or VGA - RGB cable? I tried to connect by Fn + F5, but no signal goes out. If I use the VGA - RGB cable + something is comeing out on TV but its streaming.

  Kindly help me...

  Hello

  You can use two cables to connect your laptop to the TV. It s according to the interfaces on the laptop and the TV, but in both cases, it of the same:
  Connect the cable to the laptop and TV, turn on your TV and select the right channel, then turn on your laptop. After the clean boot procedure, you can switch between monitors with FN + F5.

  If you use S-Video cable make sure you are using the coding system good TV, e.g. PAL or NTSC.

  > If I use the VGA - RGB cable something's come out to TV but its streaming.
  What settings did you use (screen resolution, screen refresh rate, etc.).

• How to connect a TOSHIBA 28W23 to the other PC?

  I posted this on a number of sites different forum but no one really knows the answer.
  Thus, its what

  If I have an old TOSHIBA 28W23 - how it connectable to an other PC gx270s?

  If someone has any advice id love it.

  It depends on the ports/plugs available.

  Don t know both devices but maybe your laptop supports a SCART.
  In this case you must use a cable SCART.
  Is the computer supports s-video port? If Yes, then you can use a cable SCART-s-video to connect the two devices.