How to connect the Nintendo Wii to my STR-DN1030?
Hello
I recently bought a STR-DN1030 and I have a question now to get the Wii audio. I use a RCA cable with video connector 3 (red/green/blue) and 2 audio connectors (red/white). What I want is for the audio and video get the amp with RCA and out to the TV via the HDMI TV OUT cable.
So I plugged the video connector 3 RCA to "Component video - SAT/CATV (2)" and tried to connect the 2 RCA audio connector to "Audio in" (sat/catv) but I have no sound, even if I get the picture.
On the allocation of entry for the video source (I choose video 1) I put the video on computer. and audio analogue.
Can you tell me how can I connect the Wii RCA component cable so I can get the video on TV via HDMI and the sound of the amp?
Thanks for your help.
Try to use the sockets labelled AUDIO IN TV to the AV STR-DN1030 receiver. If the same problem persists. Please provide the following information:
- What is the brand name of your television? If it's a Sony, which is the full model number? If it is other than Sony, is able in your TV Audio Return Channel (ARC)? (pages 26 and 27 of the Manual)
- If your TV isn't capable ARC , so you can connect an optical cable from the receiver to the TV.
- If your're TV's able ARC , does not sound problem occurs on all video games Wii that you tried? Do you get sound when the Wii is connected directly to the TV using the same red and white strings?
- Do you get sound when playing another source like bluray player, decoder, etc. ?
- Are all stakeholders affected or just some of them?
Please follow the steps in troubleshooting here.
If my post answered your question, please mark it as "accept as a Solution.
Tags: Sony Products
Similar Questions
-
Cannot connect to the nintendo wii wireless router
Original title: WiFi
IM problems to connect my nintendo wii to my wireless router, my laptop seems to connect very well, but I can't connect to the wii, for some reason I can't find the router or connection Wireless on my pc to try and solve the problems there. im not all that computer savvy so any help will be greatly appreciated thanks.
HelloYou try to connect the nintendo Wii to router or laptop?
Try this:1. click on the "Wii" in the lower left corner of the main screen of the Wii console.
2. go into 'Wii settings' and 'Internet '.
3. click 'Connection settings', and then select a connection that marked 'None '.
4. Select "Wireless connection" and "Access Point search."
5. choose what access point to connect to, then click on 'OK '.
Manual installation
1. click on the "Wii" in the lower left corner of the main screen of the Wii console.
2. go into 'Wii settings' and 'Internet '. Click on "Connection settings" and choose an open connection that marked 'None '.
3. choose "Wireless connection" and "Manual Configuration".
4. Enter the SSID of your router. Click on the blue arrow to the right of the box to move to the next screen.
5. Enter the security information. If you don't use WEP or WPA security, go directly to the next screen.
6 choose whether or not to auto-obtenir address IP and DNS information. If you choose auto-obtenir, go to "Advanced settings" and enter your information of intellectual property.
7. the MTU value. Most users leave this field empty, but it can be set to 1500 if you have connection problems.
8. choose 'Save' and 'OK '. Select 'OK' to test the connection.
If this does not work, contact nintendo for best support.
Online connection support
http://www.Nintendo.com/consumer/systems/Wii/en_na/online.jsp
Troubleshooting wireless router
http://www.Nintendo.com/consumer/systems/Wii/en_na/onlineWirelessRouterTroubleshooting.jsp
Aziz Nadeem - Microsoft Support
[If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]
-
connection for nintendo wii / error code 51330
Hello
I can't connect my nintendo wii to the internet from my TV, however much I try... I'm trying each password and code I know, raising all the Wi - Fi help topics. I tried my password key etc code administrater, still no joy. I wonder if he wants the original keycode that I issued my pile of passwords, I know. How bypass this, or find the right key or password required? It gives my point of access, which is my protected account name and then wants a WPA - PSK (TKIP) key/password. Yes, I looked it up, knowing what it is now, still cannot find everything it will be except... frustraiting. :/
I hope you can help
I currently have a portable years under windows vista and through Virgin Media wireless router
Thank you
LianneThe recommended site was useful, because it was a wireless connection problem. At the back of my wireless router is the http:// address and default password. When I typed the address in my bar http:// above my computer, he directed me to my Web page personal wireless rooter. Here, I typed the password by default and it came with the details of the technology, who had the key password I was looking for. This password key was in *, so I thought, I still don't know it! I have deleated the * and typed a password for new, fresh, then clicked on enter. He told me that she was applying new settings so I tried on the nintendo wii. It worked!
Hope this can help someone else.
Thanks again
Blessings
Lianne :) -
I have a HP Pavilion p6-2360eo with the video card Radeon 7450 connected to a monitor of 23xi Pavilion.
Now, I want to add a monitor of 23xi more, but I do not understand how to connect the cables to the video card to get two logical screen (different views on each monitor)
Supposedly this monitor can connect to the video card, you have the HDMI connection. Assuming that the first monitor is connected via DVI, then try a HDMI cable to the second. I got this from the description of the video card on THIS page.
Support up to two displays at the same time in these configurations: DVI, HDMI and VGA + HDMI (using the included adapter cable)
-
How to connect the keyboard for apple tv wireless?
How to connect the keyboard for apple tv wireless?
If you mean the 4th generation new Apple Tv, you cannot currently. It does not support keyboards at this time.
If you mean the 3rd generation Apple Tv:
Use a keyboard Apple Wireless with your Apple TV (2nd or 3rd generation) - Apple supported
-
How to connect the iMac 27 inches 5 K (end of 2014) as PC monitor
Hello
How to connect the iMac 27 inches 5 K (end of 2014) as PC monitor?
Are there any adapter or cable that can help?
Concerning
M
PCs have no support for the target Display Mode.
-
How to connect the value of the input string to numeric values
Hello
I'm trying to figure out how to connect the value of unique user input string to numeric values. Basically I want the user to enter the name of a gas that I have a list for (I think I put the list of gases in a table >). Then I want to match numeric values 2 'a' and 'b', according to which gas, name of the user has set. These 'a' and 'b' values will be automatically matched with the name of the gas in a list that I put. For example, hydrogen gas has the value 3 for "a" and 4 for "b. when the user puts the ' hydrogen' name in a string constant, automatically 'a' and 'b' must be issued.» I have connect a and b to a formula
Thanks for any help
Hello
It is perhaps not exactly what you are looking for, but perhaps you could use the enumerated data type and the array of clusters of points (a, b).
Look at the VI I enclose.
-
How to connect the Officejet Pro 8100 printer to wireless network
Bought a "nine" Officejet Pro 8100 and want to use via my wireless network. The CD supplied with the printer is obsolete. Updated Apple software but can't see how to connect the printer to the network. Getting Started Guide is no help on this issue. Searched for support without result pages. Utility HP does not provide a method to set up a wireless feature. Find all the instructions, I say first of all make sure that the printer is connected to the wireless network, and that's what I can't find out how. What I forget?
Finally, I called HP hotline for help and was rescued. It turns out that Apple's software update software includes all the required components. The software from the HP Web site is no longer available. It's frustrating to see the Getting Started Guide refer frequently to the HP installation wizard and be unable to locate it. Once the wizard tech took control of my computer and installed the necessary software, it was a breeze!
I also note that compose the support number to talk with a guy was rather brief: between 1 and 2 minutes, I recall. Although there was a menu of the phone, it was not a large (unlike the attempt labyrinthine and often circular to locate the online help).
Insofar as HP knows the necessary software in not available via software update or directly from HP, wouldn't make sense to inform buyers, as well as how to access? At least do not place meaningless, useless on the Web site links that lead into oblivion and frustration!
Although I did appreciate the journey, I finally arrive at my destination. Thanks to Aris, HP technician. You are exceptional!
-
How to connect the printer wireless hp with the computer?
* - Original title - the printer printing
How to connect the printer wireless hp with the computer?
HP all what you need to be able to complete the task... See here...
http://h71036.WWW7.HP.com/HHO/us/en/EP/articles/Wireless-Setup-Wizard.html
-
How to connect the slot button Cascades
I am new to waterfalls and QML and yesterday I tried to port native QtWidget app to waterfalls, but it does not. The problem is, I add some buttons to the container in QML main file and coded my custom slot function which should be executed when the user click some button. But I don't know how to connect the clicked() signal to my function from the custom location.
When using
Connect (CloseButton, signal(Button::clicked()),this,slot(on_closeButton_clicked()));) or connect (exitButton, SIGNAL (clicked ()), this, SLOT (on_exitButton_clicked ())); I get error "unable to connect SIGNAL (null) to SLOT (on_closeButton_clicked ()) ' on all the buttons.
Here is my code in app.cpp
App::App() { QmlDocument *qml = QmlDocument::create("main.qml"); qml->setContextProperty("cs", this); AbstractPane *root = qml->createRootNode
(); Application::setScene(root); textHolder = root->findChild And qml
import bb.cascades 1.0 Page { id: mainPage content: Container { id: main Container { id: buttonHolder scrollMode: ScrollMode.None layout: StackLayout { layoutDirection: LayoutDirection.LeftToRight leftPadding: 5.0 rightPadding: 5.0 topPadding: 5.0 bottomPadding: 5.0 } touchPropagationMode: TouchPropagationMode.None objectName: "buttonHolder" Button { id: openButton text: "Open" } Button { id: closeButton text: "Close" onClicked: { } } Button { id: saveButton text: "Save" onClicked: { } } Button { id: saveAsButton text: "Save As" onClicked: { } } Button { id: exitButton text: "Exit" } } //******************************** Container { id: textHolderArea layout: AbsoluteLayout { } topMargin: 5.0 leftMargin: 1.0 rightMargin: 1.0 bottomMargin: 2.0 TextArea { id: textHolder textStyle.fontStyleHint: FontStyleHint.Default layoutProperties: AbsoluteLayoutProperties { } leftMargin: 5.0 rightMargin: 5.0 preferredHeight: 645.0 textStyle.justification: TextJustification.Enabled objectName: "textHolder" text: "" } } //******************************** } }
And I have no idea how call my app.cpp C++ slot in my main QML file
Your buttons should an objectName set to be visible to C++, the id is only visible inside the QML.
-
How to connect the bluetooth iball-groovy head game
How to connect the bluetooth iball-groovy head game
Hi Gurushankar,
You can consult the following articles and check.
Connect to Bluetooth and other wireless or network devices
Add a Bluetooth device or other wireless or network device: frequently asked questions
Hope this information helps.
-
How to connect the akai ATT01U
How to connect the Akai ATT01U with my PC? (Windows 7)
Johan Burgman
With the supplied USB cable, I guess. You probably have to install the software provided with the unit first. Check job mode, manual quick start or any documentation that came with the device.
-
Is there anyone know how to connect the "HP PSC 2355 all in one for iPhone 4S?
Is there anyone know how to connect the "HP PSC 2355 all in one for iPhone 4S?
Hello
First of all, please check if your printer in the list:
http://support.Apple.com/kb/ht4356
If so, you can use this hotfix/install:
iPhone: http://www.Apple.com/support/iPhone/Assistant/AirPrint/
If NOT you must print using other applications (if applicable) such as
http://iTunes.Apple.com/au/app/HP-eprint/id299531647?Mt=8
Kind regards.
-
How to connect the URL of Web site companies existing on the new site I've built?
How to connect the URL of Web site companies existing on the new site I've built?
Hello
If you want to use the current domain with your new business catalyst site, please follow this link
Let me know if you have any question.
-
How to connect the Ombudsman with several bpel process
Hi Please someone tell me how to connect the Ombudsman with several processes bpel in soa 11gAnd here
http://eoracleapps.blogspot.com/2009/11/how-to-call-synchronous-BPEL-process.html
Maybe you are looking for
-
Bootcamp partitions not bootable with iMac 2015
Hi guys,. I tried to install boot camp on my iMac (late 2015, Fusion drive) without success. Download a picture ISO of Windows 10. Point the wizard Boot camp on the image. Create a partition for Windows. Click install and wait until the end. Restarti
-
I can't find driver for tecra M7 - 132 on vista x 64. Where can I get it?
-
Satellite Pro U400-130 - "Please wait" is displayed during startup
I brought a new laptop Satellite Pro U400-130.While the l' interrupteur switch on the laptop, each time between the initial screen (vista logo) & the Welcome screen, please wait for t0 60 63 seconds continuous screen is this normal.
-
Voice navigation to Smartphones blackBerry for BB Maps
Hhave BB maps voice navigatiion? If so, how do I configure it? Or should I download it? If it is not available for cards of BB - what application I can?
-
Creation of VPN Tunnel / no connection is established
Hello It's my first post on the Forums of Cisco, I hope you can help me with my problem. I'm trying to connecto to the network using a VPN from Site to Site connection using a router Cisco 1841 and Cisco PIX 515E. But for some reason, I couldn't conn