How to connect to my OracleXe with SqlDeveloper?

Similar Questions

• How to connect a Toshiba TL838 with facebook profile?

  How to connect a Toshiba TL838 with facebook profile?
  When I try to connect toshiba generate email with info and links for connect facebook with toshiba accounts places but when I click on the links I see only errors.

  _ * EDIT * _

  * Ok I flashed the QR code with my phone and now is connect :) *.

  Moderators please close thead

  Post edited by: junioreks

  > Ok I have flashed the QR code with my phone and connect now :)

  Thanks for sharing!

• Qosmio X 770-how to connect a video camera with firewire interface

  Hello

  I want to buy the new QOSMIO X 770.
  I have not found information on firewire.

  The documentation talking about video editing.
  How to connect a camera with firewire?

  No connector, no card expresscard...

  Hello

  You can also use an adapter USB to Firewire which allows you to connect device firewire to USB port of the laptop.
  USB 2.0 is 480 Mbps interface and FireWire is 400 Mbps but interface so, theoretically, USB 2.0 should be faster, but that's not true. Firewire is faster according to some tests. However, there aren't big differences, so I think that the use of this card must function.
  There are various one USB to Firewire adapter on the market. Simple Google.

• How to connect my Samsung wave with my laptop via wifi?

  original title: wifi connection

  HOW TO CONNECT MY SAMSUNG WAVE 525 WITH MY DELL INSPIRON 1525 BY WIFI

  Hello

  I suggest you follow the links below and the Coachman

  Add a device or computer to a network

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-a-device-or-computer-to-a-network

  Set up a Bluetooth compatible device

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  You try to connect the phone directly on the system or through a router?

  You will not be able to connect the cellphone to the PC directly,

  See the explanation: http://www.samsungwaveforum.com/samsung-wave-troubleshooting/connecting-wave-to-pc-through-wifi/

• How to connect a mouse arc with transceiver bluetooth built-in internal instead of the packed original microsoft usb one?

  I looked all over the web, has not found an article about it? How to connect mouse arc ms via a built-in instead of the original ms one usb bluetooth transmitter/receiver? It is important to make it work without a usb transceiver, thank you. Help, please...

  --------------------------------------
  PC: Intel Centrino Wireless Bluetooth (r) 3.0 + high speed adapter with emulator bt ms can be seen in the Device Manager. (and OD)
  material: ms arc mouse.
  --------------------------------------
  PS: mouse already works with transceiver dual ms in my computer and installed the intellipoint software.

  I think that most 'Arc' mouse are not the Bluetooth mouse.  BlueTrack is the mouse "signals" used to move the mouse cursor.  It is not Bluetooth

• How to connect weblogic 9.2 with LDAP Port 636 (SSL Enabled)

  Hello
  
  We are currently connecting the weblogic administration console to LDAP using the port 989. Can someone tell us the details on how to connect Weblogic to Port 636 (SSL enabled).
  Requires you to install certificates of security for the same thing?
  
  Thank you

  Yes, the certificate will be provided by the LDAP Service provider.

  Check the SSL Configuration of the Weblogic Server.

  If using demo identity and demo trust, import the following

  keytool - v-import - alias ldapcert - keystore DemoTrust.jks - cert.cer - storepass DemoTrustKeyStorePassPhrase of the file

  If its custom identity and trust personalized, use the command below

  keytool - v-import - alias ldapcert - keystore cert.cer .jks-file - storepass

  Hope this helps,
  Faisal

• How to connect a MacBook Pro with a wire to a Canon Pixma MG7752?

  I just bought a new printer with wifi. Because my mom and Dad's cell phone is so old now, wifi is not compatible with the operating system they have, although it works on my MacBook Air. We are now trying to connect a wired, but it does not work. Someone knows how to fix this?

  I suggest that you first read the documentation supplied with the printer. Then go to the Canon support site and ask for assistance from their technical support.

  You download and install the latest printer driver for use with their version of the OS? It must be installed on their computer. You need to check on the Canon site for a compatible driver to use on their computer and the version of Mac OS X. If this computer has a Wi - Fi connection, then they should be able to connect to the printer. You can also try your computer printer sharing to theirs.

• Satellite M40-237: how to connect the mobile phone with Bluetooth

  I have a new Noki 62333 and I have a Toshiba Satellite M40 - 237. I have a big problem with the connection between them. I put t know how to turn on bluetooth on my pc. Can you help me???

  Hello Iva

  A friend of mine has Satellite M40 and I know that this unit is shipped without BT module. If the unit has BT module, you will find labels of BT on the underside of your laptop.

  To establish a BT connection with his mobile phone that he uses the key USB BT.

  By the way: fact Iva comes from Zagreb, Croatia?

  Good bye

• How to connect two ESXi hosts with a connection to 1Gbps via ADJUSTABLE and the transfer of files between them?

  Dear community,

  Like many of you, I am facing the problem of executing an effective backup of VMs. unfortunately I can't use standard methods: my servers are rented from the root servers and therefore haver some limits. Their main NIC is connected to the Internet on the speed of 100 MB. It's very slow, if I try to VM backup via this connection images. In addition, backup sessions running through the shared management interface are affecting the production of virtual machine performance.

  To resolve this problem, I ordered an additional network card to each server and asked the data center to connect my themwith a physical link (crossover cable). OK, between my servers 1Gbit link is established, but how do you use now?

  -I can not move the management interface of these cards, because they have no connection to the internet.

  -I can't use among the guest computers because the guest computer is unable to access the files on disk on the host computer.

  So, I've exhausted all my ideas. Maybe someone knows the trick that will let me use 1 GB link between two machines of ESXi to mutually backup disks of virtual machines from one host to another.

  Thanks in advance for your ideas.

  Who is King

  Anton

  Create a vSwitch on each host and set the NETWORK adapter that you will use with the x-over cable.

  Create a portgroup Console of service on each vSwitch and assign it an IP address on the same subnet for each server (router/gateway address does not necessary) for example 192.168.0.1 and 192.168.0.2 on each host.

  Connect the cables between the server network cards.

  You should have a link between two service consoles. I now download and deploy the device of the vMA, on the two hosts for the fault tolerance. Write a script on the VMAs on each host to a-i vmkfstools from one host to another and vice versa.

  If you have virtual machines registered pointing these VMDK on both hosts, then have your scripts remove the VMDK and re - the clone using vmfkstools whenever you back up, you should have a backup solution of rudimentary virtual machine (full copy) in place.

  Now you do not miss the service console?

  Good luck

  Alex

  www.phdvirtual.com

• How to connect to the internet with no phone service

  I cancelled the phone service to my iphone 4 and now try to erase all content and settings but it rises as unable to join the network.  My network is fine as I use it on my new phone.  How can I get this phone to connect to the wi - fi so it will erase my information.  I already removed my icloud account phone but it still shows my i.d. apple on the phone and my phone number.  How can I get this information out there.

  Use

  Settings > general > reset > erase content and settings

• How to connect the video cable with Qosmio G50

  Hello

  I bought the Qosmio G50-11s and received a video cable with it. (Jack mini jack RCA Red/white/yellow) But I find no way to connect it to my laptop, not the manual or all online resources talks about it. The problem is that I need to capture video from my VCR to my laptop and normal TV antenna comes with a lot of noise, so I have to use video in the cable. Any ideas?

  Thank you
  M

  Hello

  In the past I made some experiences with it. I wanted to create DVD copy old VHS VCR equipment. Using the recorder even? I did this on Qosmio G30 but the principle is the same.

  The fact is that you need to send the signal to the laptop and to do this you must use the video port.
  I do not see that your Qosmio has several of them, so I think that the only way to send the signal to your laptop is to use the antenna port. What video output port you want to use on your recorder?

• Satellite A205: Dynadock - how to connect to LCD TV with HDMI Cable DVI

  I recently bought this product and had a problem when connecting it to my LCD TV.
  I used an HDMI cable to DVI to connect to the TV. Only a small part of the display shows on the TV.

  I did all the settings on the laptop (Satellite A205) but it adjusts only the laptop screen, not TV.
  I also used VGA adapter, connected to the entrance of the computer to the TV, same effect. Can I use VGA output on the side of the laptop to TV ok.

  Any ideas on how to adjust output dynadock parameters?

  First of all, it would be interesting to know what dynadock you exactly; a DVI or a VGA port?

  > I did all the settings on the laptop (Satellite A205) but it adjusts only the laptop screen, not TV.

  You should know that the dynadock has an own integrated graphics controller and video drivers to control the video stream.
  Therefore, you should change the settings directly in the settings dynadock and not on the laptop!

  Greetigns

• How to connect my Satellite A200 with LCS Philips TV?

  Hi, I have problems to connect my Satellite A200 1E1 with a PF9967D 32 Philips TV LCD HD ready.
  Manuals recommend an HDMI extension that is unfortunately not available with my laptop.

  However, is possible to use an S-Video connection instead? I could accept a lower quality. When I connect the laptop with the TV, I feel that the Satellite doesn't send out any signal. The combination "FN + F5" does not have the ability to switch between screens. Once, I connected a projector and had no problem at all with switching between the video-projector, computer screen or both.

  Any comments would be much appreciated, thank you in advance.

  Hello

  In the user manuals, it is written in almost each of the chapters on ports or machines slot a short comment: depending on the configuration. This means that this s manuals can be used for different laptop A200 models.

  Each laptop comes with optical disc drive HD-DVD also has an HDMI port. According to the specifications of the laptop, your laptop has no ODD of HD - DVD, and because of this, there is also no HDMI port.

  There sonly a S-video to TV-out port. Using this port you can send the video signal to your TV. I have too many LCD TV and I have used it several times with my laptop A200. It's very simple, but make sure you use the right channel (S-Video) on your TV. Using the FN + F5 key combination, you can switch to the TV.

  If this does not work you are doing something wrong.

• How to connect SQL company database with BES Server

  Hello

  I am new to this concept, how to access SQL database via BlackBerry App. Can I access data using BES, please explain. What are futures contracts, I can use when I install BES on Enterprise Server.

  You can find more information on this topic by using the search function.

  BB does not provide a jdbc driver, this means that you will need to use a server as middleware between SQL and BB component.

  How communicate with this server, it is to you, send commands sql as strings, use a Web service, or something else.

• How to connect the HP laptop with Sharp TV

  Original title: network network adapter Ethernet NIC wireless networking device

  I can't get my laptop to show on my TV?  I have access via wireless remote control (cable company modem) connected to my deskuttop computer I ever use.  I use the laptop, but for some reason, no matter what I tried I can't display laptop computer or other computers on TV?  I got it when I first connected my new Blue Ray DVD player but have not been able to get this new since?  I am Windows 7 64 bit and use the Blue Ray device to navigate.  I am able to get Internet via internet connection via Blue Ray device but cannot pull up cell phone, even if it is listed, and connects to the server.  I have to go every time manually in a WPS connection hook that seems to stop working a few moments after, I hook up each time.  Cable operator said no problem since I can get internet connection modem is good, but shouldn't the button WPS Stay connected all the time once that I activate it?  Doesn't seem like it should stay close.  Cable said they think it is a problem between my Sharp TV and my new HP laptop?  This seems realistic?

  I apologize for the confusion, I know that I have not made this very clear situation and you will gladly explain all I can better detail, I didn't have what it took.  The simple problem is this, I want to just view and use my laptop by my big screen because I'm disabled and it would be much more convienent for me.

  Thanks for any help or suggestions you may have.

  You can not normally connect a laptop to a TV via most of the networks.  It is simply not available unless the laptop can use the Intel WiDi system:

  http://www.Intel.com/content/www/us/en/architecture-and-technology/Intel-wireless-display-video.html

  You might be able to set up a media player on your laptop that might be able to be picked up by the Blu - Ray / TV media features.

  In general, you normally connect a computer to a TV with a VGA on TELEVISION port or a HDMI / DVI cable type.