Satellite A205: Dynadock - how to connect to LCD TV with HDMI Cable DVI

Similar Questions

• Satellite L650-11F - how to connect to LCD via an HDMI cable?

  Hello world

  I have the Satellite L650-11F with ATI 5650 and HDMI port and I want to connect the laptop via HDMI lcd screen so that I have some office using 2 * ATI Catalyst * and * software HydraVision, but ATI sites said that Toshiba notebook is not supported (Please check with your mobile phone OEM for support of the drivers for these laptops).

  So, how can I connect my laptop to LCD screen to get 2 workstation?

  Sorry for my bad English :)

  Hi thebluewriter,

  I think you need to check only the other discussions of the forum on the connection for laptop LCD screen. You will find enough about it!

  In any case, most recent display driver you can download on the official website of Toshiba, but usually it s preinstalled on your laptop.
  If you are using a HDMI cable, use just FN + F5 key combination to switch between monitors. All that s! :)

• Satellite M40-237: how to connect the mobile phone with Bluetooth

  I have a new Noki 62333 and I have a Toshiba Satellite M40 - 237. I have a big problem with the connection between them. I put t know how to turn on bluetooth on my pc. Can you help me???

  Hello Iva

  A friend of mine has Satellite M40 and I know that this unit is shipped without BT module. If the unit has BT module, you will find labels of BT on the underside of your laptop.

  To establish a BT connection with his mobile phone that he uses the key USB BT.

  By the way: fact Iva comes from Zagreb, Croatia?

  Good bye

• How to connect a Toshiba TL838 with facebook profile?

  How to connect a Toshiba TL838 with facebook profile?
  When I try to connect toshiba generate email with info and links for connect facebook with toshiba accounts places but when I click on the links I see only errors.

  _ * EDIT * _

  * Ok I flashed the QR code with my phone and now is connect :) *.

  Moderators please close thead

  Post edited by: junioreks

  > Ok I have flashed the QR code with my phone and connect now :)

  Thanks for sharing!

• Satellite Pro L40 - how to make a dual boot with two recovery disks

  A small question;
  How to dual boot with two recovery disks ive got with my laptop (Satellite Pro L40)

  discs 1 & 2 are windows vista buisness
  discs 3 & 4 are windows xp profesional
  Disc 5 is updated the bios

  The guy where I bougt garage computer (a metal regular store named expert) says that it is posible with discs tose.
  I have
  I already have a partition, but when I boot from disks, is not has the option to select a partition

  Thanks already

  > Satellite Pro L40 - how to make a dual boot with two recovery disks?
  Short answer: you can't do that. Maybe if you have two hard disks (I tried didn't) but as much as I know your SP L40 has only one.
  Ask this smart guy, how to do this. Maybe it's a useful tip.

• connection of two monitor using hdmi cables

  hp Hello Forum

  I want to connect two monitors using two hdmi cables, hdmi to dvi cable and an external graphics card.  The problem is, I don't know where to start? (what to connect to what?) I can do if I have easy to follow instructions or illustrations would be gr8, thanks in advance :-)

  Sorry... I just noticed that we have discussed your configuration before. May I ask if the previously suggested configuration did not work? What prompted the purchase of the USB graphic card?

  Display USB adapters are designed mainly for the non-graphiquement intense... Adding screens for things like spreadsheets, documents word, daytrading, presentations, etc. The display adapter using USB can cause a lower performance than using the native chart AMD Radeon HD 7570 card. I suggest that you avoid using the USB graphic card, if possible. Depending on your selection of available cables, if suggests using one of the following configurations;

  (1) computer > HDMI cable > monitor and the computer > cable DVI > monitor (recommended)

  or

  (2) computer > HDMI cable > monitor and the computer > DVI-HDMI cable > monitor

• computer not automatically standby (formerly titled "impossible computer automatically sleep when it is connected to the internet with modem cable")

  Hi, I noticed recently that my computer (Windows XP Media Center Edition 2005) is unable to sleep automatically when it is connected to the internet with a cable modem. Change the settings for my current power mode and try a different feeding regime (diagrams of Windows XP default power and power management, I created) only solves the problem for 2 days at most. I also tried to change the settings for the other power plans mentioned, and yet once again, the problem was only set for two days at the most. I also tried turning off my computer, restarting my computer, recording Powercfg /Restore Default policies in Run, saving sfc/scannow in Run, and again, I got the same result. Reset and power cycling the modem cable is not helped either. To help you better understand the problem, for example, if I had the date set for the screensaver set to 1 minute, the time for the monitor to turn off set to 2 minutes and time for your computer set to 3 minutes, the screen saver activate after 1 minute, the monitor turns off after 2 minutes, but the computer would not sleep mode after 3 minutes , even after an hour or more. I tried to check the Task Manager, and I have not noticed any process that would be interrupting the day before. However, I noticed that when I turned on the monitor by moving the mouse, even when the computer was unable to sleep and unplugged the ethernet cable from the cable modem and waited, the computer has entered standby as it should have.  I tried to find a solution for more than a week, contributions for this issue would be greatly appreciated. Thank you for taking the time to read my post. (Update: it seems that the problem is something else then my cable modem.)

  Hello

  Thank you for the update.

  This behavior can occur because of possible conflicts of third-party software, which includes the third-party security software.

  You can also temporarily disable third-party security software and firewalls installed on the system and check the issue.

  If disabling the antivirus software solves the problem, you may need to configure the settings of the antivirus as a result program. Please contact the software vendor for assistance in this regard.

  Note: be sure to enable the security software on the computer after checking the issue.

  Note: When you perform a clean boot, you can activate services for the modem, network card and disable third-party services to check the issue.

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• Satellite M40X-189: how to connect RGB port to port RS232?

  Hello
  as you know the satellite M40X - 189 P - M 730/XP has a port monitor RGP and doesn't have a RS232 port.
  I work with device of automatic titration requiring the RS232 port for connection!
  No idea how I can connect my laptop on this unit!

  pls help
  Thank you
  Omrankl

  Hello

  AFAIK the RS-232 port is a serial port and I don t think that it of possible to connect the RGB port to the RS232 port.
  But I found the site useful:
  http://www.Ontrak.NET/USB.htm

  You will find a description how to connect the USB port to an RS-232 port.
  You need an interface ADU.
  Click on the link.

• Satellite A205-S7464: how to install for XP Pro SP2 Toshiba common Modules

  Hi all.

  I have a new laptop computer that is preinstalled with Windows Vista Home Premium because they tend to.
  Vista will not run a number of programs I need to run, I found, and I really don't like that much anyway...
  I decided to install Windows XP.

  I partitioned the HD and ran the installation program to a new partition on the disk with all the drivers that I have collected for sleepstreamed XP on my XP Professional Retail drive. There is no problem. I got everything up and going very well. My only problem now (well, except for some residual issues with the original partition to Vista), is I can't get utilities Toshiba owners going so that I can use for example the keys FN + commands, options power management, etc.

  I've experimented with a couple of different versions of the Modules around common drivers and other utilities, but have some still been unable to get things moving in the direction I want to go.

  Essentially, it's really control FN + F6 and F7 (brightness adjustment), as the monitor on this beast kills a battery.
  I tried the support from Toshiba, but without success.
  I know that the Vista to XP downgrade is a fairly common gesture, so if someone has been there and could give me some guidance step by step in getting things market I would be forever indebted.

  The model is Toshiba Satellite A205-S7464, Réf. PSAF3U-07300V.
  Let me know if any other information is needed.

  Thanks in advance, Jacob

  There seems to be a series of laptops that have been delivered only in the USA and therefore all Toshiba drivers and utilities must be installed from the US site.

  It is a Toshiba driver page we:
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_modSel.jsp

  Where did you find this driver of common modules?

  > I've experimented with a couple of different versions of the Modules around common drivers and other utilities, but have some still been unable to get things moving in the direction I want to go.
  I assume that you are not able to install these common modules because you used the wrong version that does not and is not compatible with your laptop.

• Satellite P100-160 - how to connect the camcorder?

  Hi all!

  Can anyone can advise, try to connect the Sony camcorder with 4 pin i.link, but can't seem to connect the two devices.

  I have AC power on the camera, tried to use the other movie maker, adobe, etc. no joy.
  is thinking why is this?
  Thank you

  Hello!

  As Garrett Satellite P100 supports the firewire port.

  Normally, the port is always on and you need an application that does not recognize your camcorder correctly. You can then copy the videos on your laptop.

  Good bye

• How to connect by Satellite L305 to TV with HDMI Cable VGA

  Hello

  I have a Toshiba Satellite L305, running windows vista Home premium.
  I bought a HDMI VGA cable but when I plug my Satellite on my Westinghouse TV I can't get the two to connect.

  Please help me.

  Hello

  You try to connect to laptop (HDMI) to TV (VGA) using an HDMI cable to VGA?
  As far as I know this is possible only if the s for computer laptop HDMI port can be set to analog signal. As much as I know this option is not available in the BIOS or elsewhere.
  So if you want to connect VGA HDMI Digital common so I have to say; It won't work buddy.

  You will need something like HDMI to VGA Converter that converts the digital signal into analog signal.

• Satellite L500-1XZ - how to connect the port adapter or firewire?

  How to connect an adapter or a firewire port? The specifications of my laptop refer to two expansion slots (one for the configuration). Where they are and how to connect a firewire adapter?

  Thanx

  Hey Buddy,

  You can buy a PC Express card with firewire ports to connect your firewire devices. Ask your computer dealer preferred for this, they should be able to sell an expansion card.

  For example, I founded it:
  [LINDY FireWire - 2-port ExpressCard/34 card | http://www.amazon.co.uk/LINDY-FireWire-Card-Port-ExpressCard/dp/B000T5RNZQ/ref=sr_1_3?ie=UTF8&s=electronics&qid=1268765430&sr = 8-3]

• Satellite A205-S4777: how long can I use the BT stack downloaded from the page

  I have a Toshiba Satellite A205-S4777 with windows vista home premium (bought in the USA two weeks ago).

  Yesterday I installed the new version of the Toshiba Bluetooth Stack 5.10.12 (T) who seems very comfortable. I bought, for this computer, in a store in line (not yet received) an ADAPTER of BLUETOOTHT TOSHIBA USB 2.0 + EDR capability wireless network with manufacturer part number: PA3477U-1BTM.

  My questions: after the installation of the aforementioned usb, the toshiba bluetooth stack bluetooth device will allow me to have the software (toshiba bluetooth stack) at the moment I need or will give me only 30 days trial?

  I knew that the toshiba bluetooth stack on the download site is for TOSHIBA hardware only.
  Is this USB Bluetooth device examined by the software as hardware Toshiba?

  Will it work ok with the satellite A205-S4777?
  I bought this camera because when I installed a usb bluetooth IOGEAR, worked well, but the software recommended in the bar of tasks such as software "will be used only for 30 days trial.

  That's why I bought the Toshiba usb bluetooth already above.
  Please let me know your experience or any help on this matter.

  With sincere friendships.

  You should check this thread Toshiba Bluetooth:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=26417

• Satellite L450-181 - how to connect to the TV?

  How to connect my laptop to my Toshiba regza TV?

  Hi ian guest,.

  Unfortunately, your laptop doesn t have output HDMI then you must use the VGA port on your computer. Most TVs also have that VGA port, so you can use a VGA cable to the connector on your laptop to the TV.

  If you did start two devices and select VGA (PC) channel on your TV. Press the FN + F5 key combination to switch between monitors (internal and external).

• Satellite A500 - 15 M: unable to connect to the TV with HDMI

  Hello

  I have a Satellite A500 - 15M. I recently tried to connect to my TV so I could watch certain shows online on my Hannspree Xv HD ready TV.
  The HDMI out does any record on the TV - the TV displays a message "not supported" and remains off (as if there is no signal) - display settings on the PC it does not recognize the TV... actually it [Intel Graphics and Media Control Panel] indicates that the TV/monitor settings are not supported.

  But I can connect via the VGA output - although I have to delete the display settings to 1024 x 768 to show on TV. In addition the display on the TV then is mainly pink and red, even if my pc display peak is most often blue. -start of the Toshiba screen displays on the TV, without any problems and one or twice the login screen was displayed too much, but then sometimes it isn't...
  I know that's not the VGA cable as I can connect to the TV with it on netbook advent my wife without any problem.
  Are there drivers, I need to update / download? Or I need to change the settings?
  How can I get my screen on my TV?

  Any help would be greatly appreciated. Thank you

  Hello

  First, you must connect the two machines (laptop and TV via HDMI) when the two devices are turned off. After turn on the TV and the laptop.

  You must choose the HDMI on TV channel and should then use the FN + F5 key combination to switch the video output to the TV.

  If this does not help, try updating the graphics card driver.
  It seems that your laptop supports the Intel graphics chip. Therefore, you can see the Intel page for new drivers.

  Welcome them