No windows service installer windows XP

Similar Questions

• Unable to play the sims 3, error pops up that reads "service installation failed (0x0175d824)".

  Original title: Sims 3 Setup error service?

  Hello! I tried the support of EA, but they were unable to help my situation. I also tried google, but did not get a lot of research.

  Anyway, I tried to play the Sims 3, but since I did an update of the Windows 7 service pack and an update for my NVIDIA graphics card, it will not open the game. Instead, an error pops up that reads "service installation failed (0x0175d824)". It worked fine up until the point was I updated my computer and then it didn't work anymore. I don't know if it's a system error or other thing, but google and EA technical support has suggested that it is a registry error. I downloaded a registry cleaner and it has really helped, or have manually uninstall then reinstall the Sims 3 game.
  It has also been suggested, I try a clean boot, but I'd really rather than my last resort.
  Here is a link to my characteristics of the computer.

  Hello

  I suggest you follow these methods and check.

  Method 1: Perform the clean boot and open the game. We are on a show to see if third-party applications are stop the opening match.

  To do this, follow the steps in this link:

  http://support.Microsoft.com/kb/929135

  NOTE: After you check the clean boot feature configure Windows to use a Normal startup using step 7 proposed in the above mentioned link.

  Method 2: Check this link suggestions. The problems of the game performance

  http://Windows.Microsoft.com/en-us/Windows7/fixing-game-performance-problems

   

  Method 3: Uninstall the Nvidia drivers, download and install the updated drivers on the manufacturer's Web site and check.

  Updated drivers for the graphics card and check.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 4: Run system restore.

  Restore the computer to the date where it worked great:

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  NOTE: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  I hope this helps!

• Active Directory certificate services installation failed with the following error: unknown mapping algorithm. 0 X 80091002 (-2146889726 CRYPT_E_UNKNOWN_ALGO)

  Hello

  I installed the role of CA of the authority in the installation, I want to use the existing root certificate when I try to import this certificate .pfx, that I have this error

  Active Directory certificate services installation failed with the following error: unknown mapping algorithm. 0 X 80091002 (-2146889726 CRYPT_E_UNKNOWN_ALGO)

  Anyone know what's wrong

  Thanks for help.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Active Directory Management Gateway Service - installation problem

  I need a 2008 field test environment to serve as a playground of PowerShell, so I loaded Virtual PC and have created two test computers.  A load with Windows 2008 Server Standard Edition, 32-bit.  The other is Windows 7, 32 bit.

  The 2K 8 machine is dcpromo had to a domain controller.  The configuration required for the loading of ADMGS is whether Services in field of directory running Active (which is), and there with .NET Framework 3.5 SP1.  I was unable to install ADMGS with 3.5 SP1 in place and have since installed .NET 4.0 and still can't install ADMGS.

  This machine does not have installed SP2 and is current on all windows updates.  From the link:

  http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=008940c6-0296-4597-BE3E-1d24c1cf0dda

  I try to install the Windows6 file. 0-KB968934-x 86.msu.  When I try, I get the message "the update does not apply to your system".  If I try to install the wrong version, I get a dialogue, I expect: "the version of Windows you have installed does not match the update you are trying to install.  So, I'm intrigued by the present.  I feel I meet the criteria for installation, and if I'm seeing this, other people should be too.  But I'm not finding anything seeking a response, so I'm here...

  Thanks Savan.  I didn't need to post here.  Did a search and found an existing post, which suggests this patch:

  http://support.Microsoft.com/kb/969166

  Installed this patch, even if it's for .NET 3.5 and 4.0 I installed it and I was able to successfully install ADMGS.  This patch is not mentioned here:

  http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=008940c6-0296-4597-BE3E-1d24c1cf0dda

• Photoshop elements 12 Shared Services - Installation failed

  Have tried two times to get install (second time turn off my virus checker) a failure to install the shared services, then it restores and uninstalls programs.

  Downloaded Support Advisor - has not found any question.

  Open the file "PSE12 STI Installer 12.0 10-26 - 2013.log.gz"-gibberish to me but no obvious error Code.  Last lines few involve a successful installation (copied below)

  ========================================================================================== ====

  Restarting your computer is recommended:

  In order to complete the installation, restart the computer

  > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >

  Call post-Forum custom Hook

  Start the DB local media cleaning.

  Removal of media premises db.

  Cleaned media local db.

  : TIMER END: [Total Timer] took 10539,3 milliseconds (10,5393 seconds) DTR = 38730,1 Kbps (37,8224 Mbps)

  Uninstalling AAM

  AAM uninstall Status: 0 and 0

  Exit code: 0 - no error.

  *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

  END - Installer Session

  *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

  ========================================================================================== ======

  OS: Windows 7 Home Premium (64-bit)

  Norton 360

  2 months old Lenovo

  Help?????????????????? ................

  Thank you

  Resolved using CHAT with an agent.  Souloumiac was excellent.

  At issue:

  Navigate the DVD, open the PES 12 folder (if you download then it should be in the folder of Photoshop Elements).

  The ElementsSTIInstaller to install it then running

  NAVIGATE to "C/Program file (X 86) /Common leader/Adobe /.

  RENAME the OOBE folder as oldOOBE.

  FORCE DVD

  It is now installed.

• The inventory service installation failed

  Hi all

  I made a new server ESXI 5.1 and I create a virtual machine with windows 2012 for installing vCenter but I have some problems.

  When I try to install the inventory Services I get the message: «the fully qualified domain name cannot be resolved with nslookup...» »

  But when I run NSlookup, it works very well.

  Any idea to solve this problem?

  Vcenter is compatible with windows 2012?

  Thank you in advance.

  Verify that each domain controller properly configured PTR DNS (direct and reverse research areas) records and ensure that the content of the PTR record is accurate. To do this from the Windows command line, you can run the command nslookup on the name and IP:

  Name:

  nslookup server.domain.com
  Server: DNS server
  Address: Server IP address

  Name: Server.domain.com
  Address: IP address

  IP address:

  Nslookup IP address
  Server: DNS server
  Address: Server IP address

  Name: Server.domain.com
  Address: IP address

  You can also try to delete and join the host in the domain to see if removes the problems of connectivity/nslookup.

  Concerning

  Girish

• Satellite A105 - Service installation section in the INF file is invalid

  I tried to install the equipment to a sansa MP3 player on my Satellite A105 but get to a screen that shows "section to install service in this INF is invalid" and impossible to install this device.

  Any suggestions on how to fix this?

  Thanks in advance.
  Steve

  Hello

  I never heard this MP3 player...

  What OS do you have? Make sure that if the software is compatible with your operating system that you use.
  In addition, install all Service Packs and patches for your operating system.

  In my opinion the best option would be if you contact the manufacture of this MP3 player. Normally, they need to know what means this error message mean and how you can solve it.

• While trying to install AD RMS, I came across the following error message on the Installation results page: Rights Management Services Installation of Active Directory was successful with errors

  Try to configure the Server Active Directory rights management failed. Exception has been thrown by the target of invocation. to

  System.DirectoryServices.Configuration.ProvUtils.EnsureGroupMembership (String
  strTargetComputer, String strUserName, string strGroup, Boolean, String strDomain
  fShouldBeMember)
  at Microsoft.RightsManagementServices.Configuration.ProvisioningBase.EnsureUser)
  at Microsoft.RightsManagementServices.Configuration.ProvisioningBase.Run)
  at Microsoft.RightsManagementServices.Configuration.ProvisionerBase.DoProvision)
  at Microsoft.RightsManagementServices.Configuration.ProvisionerBase.Run)
  to Microsoft.RightsManagementServices.Configuration.ProvisionerHelper.Run (OperationType
  operationType, data object)
  to Microsoft.RightsManagementServices.Configuration.ProvisionEngine.Run (OperationType
  operationType, Boolean passwordEncrypted)
  at Microsoft.RightsManagementServices.Configuration.CmdLineHandler.Run)
  Delete and re - install AD RMS to try the implementation again.

  Hi Samuel

  Your question is beyond the scope of these Forums for answers. It is better suited for the IT Pro TechNet public. Please ask your question in the following forum.

  Directory Services Forum - Technet:
  http://social.technet.Microsoft.com/forums/en/winserverDS/threads

  Concerning

• HP LaserJet Professional P1606: HP Web Services Installation - connection error. Check the Internet connection.

  I try to activate the Services Web of HP but connection error. Check the Internet connection. .

  I use the static ip address with the address of the preferred DNS: 8.8.8.8 and 8.8.4.4 and it does not work.

  I changed to DHCP as it does not work.

  I have a ZTE home modem router connected to the printer.

  The link below should help you.

  http://h30434.www3.HP.com/T5/user/viewprofilepage/user-ID/2585903

  Kind regards

  Oliver

• My Mac Cloud service installation

  I tried to install on my Macbook Pro and my iMac CS6 cloud service and computers ask me to close or stop the execution of the 'ShellExtLoader' file / App which I was not able to find it at the moment. I have a project due Monday morning for school and I need to install Indesign right now.  Can anyone help, pleeeeease...   I'm despreate.

  Using the activity monitor

  Mylenium

• HP Envy 4500/Series: Cablelink (Austrian cable service) / installation HP Envy 4500 series problem

  Hi, I have a new HP Envy 4500, and it does not connect to my wireless network. He sees the correct SSID (using WPA - PSK / TKIP or AES), but he will not join the network after providing the WPA key. Printing test results shows a FAILURE on > parameters - without filtering. I don't know if I use MAC filtering on the network, because I don't know how to check this on this modem.

  I am also unable to join using the WPS procedure. I tried with and without a USB connection. I have 5 other wireless devices on the network, which all connect without any problems.

  In addition, I put static IP details on the Panel after reading the HP forum where this problem was stated by setting just the IP address and no subnets. Still no connection

  The printer works via USB ok.

  I got it connected to my neighbors A1s wi - fi network.

  I have a new wireless network to cable and modem put cable in the last week connected to Cablelink. I have a new router Cisco EPC3940. I tried to restart, connection to WPS and wireless USB connected. Reset the printer and modem and tried with and without using a static IP address.

  I tried to reconnect to my neighbors A1 connection - success.

  I tried with USB lead-success

  I tried direct to print without wire-success

  I tried to share wireless USB by using HP software-failure

  I tried the HP PC don't doctor too - no available solutions.

  I have read and tried several fixes on the HP forum-no success

  The fault is clearly my printer connect to my cable modem wireless (or my printer connect to my wi - fi of Cablelink) like all other connection works!

  I posted at the end of a similar position, but did not respond. Help please.

  Carl

  I finally solved this problem after 2 weeks of trying everything! Based on the above comment from BH, I thought that I had to turn off my radio show from 5 Hz. My new router has prevented to me because of the way Cablelink run their software. However, I finally got access to change it. I disabled 5 Hz. I still have the invalid password! Then, I changed the predefined WPA WPA2. It worked. I turned on my 5 Hz back show, the printer is remained connected. I then changed back to WPA2 and immediately lost connection! I put it to WPA and it connected again! I did NOT change key wireless, he remained at 16 characters, just the level of security! It seems if I want my Envy NEW 4500 with UPDATE drivers on my wireless network, I have to REDUCE my password security, which comes by default with modems cable new with Cisco, and accept the WPA! The strange thing is my old Iphone 4 and my old Apple TV both connected without problem. Therefore more recent Iphone to my wife 5 c and our newest Samsung UHD TV. So why a NEW model of printer is sold in stores right now, not able to work on WPA2? I lost 2 weeks on this issue before the sort it! It works, but I'm not happy! Same HP UK failed to connect after 4 hours on their online chat and remote assistance online! I worked it out myself from the comment by BH! Thanks BH. HP POST PLEASE A REPLY ON THIS THREAD WHEN YOU FINALLY WRITE A SOFTWARE FOR YOUR PRINTER TO WORK ON WPA2. MAYBE YOU CAN EMAIL CISCO IN ORDER TO WORK OUT HOW TO DO THIS BETWEEN YOU.

• Update Windows. All installs back down I'm under XP SP3

  Update windows loaded down

  How to troubleshoot Windows Update, Microsoft Update and Windows Server Update Services installation issues
  http://support.Microsoft.com/kb/906602 TaurArian [MVP] 2005-2010 - Update Services

• Windows XP Installer does not not for updates or MS Office 2010. Error says Safe Mode, but I'm not in it.

  Windows XP Installer doesn't work is not for the automatic updates or MS Office 2010. Error says Safe Mode, but my machine is not in Mode without failure.

  When I try to run MS Office 2010, it starts a dialog box "preparing to install...." "even if I had used it for a few years. In the end, it fails and tells me whether I'm in Mode safe or I need to reinstall Windows Installer, I have done several times.

  I can automatically download updates and they seem to be installed, but all fail at the end.

  Any ideas on how to address this problem? Yes, I know that it is probably recommended to buy a new PC, but I need this machine operate fully for the next months. Then by reloading the operating system does not, either. He told me that my XP disc is the wrong version.

  Thanks in advance for any ideas.

  Hello

  1. What is the exact error message that you receive?
  2 have you made changes on the computer before this problem?
  3. all of the updates fail to install?
  Method 1: Make sure that the Windows Installer service is not set to disabled.

  (a) click Start, click run and type services.msc and press Enter to open Services.
  (b) click the Windows Installer service, and then click Properties.
  (c) if the startup type box is set to Disabled, change it to Manual.
  (d) click on OK to close the Properties window.
  (e) right click on the Windows Installer service and then click Start. The service should start without errors.
  (f) click on the file menu, and then click exit.

  Method 2: Error message "Could access the Windows Installer Service" when you install a program in Windows XP
  http://support.Microsoft.com/kb/315353
  Note: To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756
  Also note: Please, do not KB315341 (how to perform an upgrade on the spot (reinstallation) of Windows XP)
  Method 3: You can also download the latest version of Windows Installer from the link below:
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en
   
  Reference: troubleshoot common Windows Update, Microsoft Update and Windows Server Update Services installation issues
  http://support.Microsoft.com/kb/906602
   
   
  
   
   

• Error: "Windows Installer is not installed properly' & error code Ox641 for Windows Update.

  Original title: my "Windows Installer is not installed properly.

  I can't update my XP computer because my "Windows Installer is not installed properly. All facilities Microsoft Update failed (code Ox641). I wouldn't change anything. Help!

  Hi Mark,

  Did you do any hardware changes or software on your computer before this problem?

  You can follow this link & check if the problem persists:

  How to troubleshoot common Windows Update, Microsoft Update and Windows Server Update Services installation

  Reference: You can not install updates from Windows Update, Microsoft Update, or by using the auto update after a repair install of Windows XP after you install Windows XP SP3 immediately after a new installation of Windows XP SP2 or

  Because of Windows Installer, you can follow this link & check if the problem persists:

  Error message "Could access the Windows Installer Service" when you install the application

  Hope the helps of information.

• How to install the 2007 Microsoft Office Suite Service Pack 3 (SP3) when the automatic update of windows fails?

  My PC tried to download and install the 2007 Microsoft Office Suite Service Pack 3 (SP3) every night when I turn off the PC, but it still fails. I tried to download it manually but it does not work and I even tried the Microsoft Fix It service to detect any problems but there is not.

  So, how can I download this software point?

  Hello

  1. are you able to correctly install the other updates?

  2. you receive any code/error message when the update installs?

  (a) you can check the status of updates on the Windows Update Web site or on the Microsoft Update Web site.

  (b) click on view update history. A window opens that displays the updates that have been installed or that have failed to install on the computer.

  You can follow this link & check if the problem persists:

  How to troubleshoot common Windows Update, Microsoft Update and Windows Server Update Services installation

  
  Reference: you can not install updates from Windows Update, Microsoft Update, or by using the auto update after a repair install of Windows XP after you install Windows XP SP3 immediately after a new installation of Windows XP SP2 or

  If you have a problem only to install the Microsoft Office updates, I recommend you to ask your question in forum Microsoft Office assistance:

  Support for Microsoft Office Community Forums

  Hope the helps of information.