How to connect to the planning worspace

Similar Questions

• How to connect to the server from VPN Windows Sever?

  Hey guys, I recently created my own VPN server to connect to my home network using Windows Server 2003. I know I probably still need to do this if I don't know what I have to do, but how to connect to the server, or at least set it up in order to be logged in? I think I got the computers communicating with each other, but I think that I am running into errors of authentication. Could someone point me in the right direction with regard to what I have to do what I already have Setup? Thanks in advance.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Need to know how to connect to the internet, anywhere

  Original title: internet connection on laptop

  10 years ago, I got a laptop and was able to connect to the internet anywhere I went. I don't remember how I was able to do it without a motem

   

  Hi Susan,.

   

  Thanks to join Microsoft Community where you will find all necessary information about the Windows operating systems.

  Want to know how to connect to the internet wherever you go.

  You can use USB dongles to connect to the Internet via a wireless connection.

  We need more information to help you better:

  What version of OS are you using?

  You can use your favorite search engine to search for USB dongles.

  Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  You can also contact an Internet service provider for assistance.

  I hope this helps. If you need assistance or if you have problems of Windows in the future, let us know and we would be happy to help you.

• How to connect to the database

  Hi all

  I use labsql (and quite new to him m) and the server Mysql 5.1.I wanted to know how to connect to the database without changing the name of the dsn from the tools administrative/ODBC 5.1 driver manually. I want to install exe in several PC and it would be a great help if I could make the connection directly but my Vi.

  I went through several forums and came to know that 'Provider = ProviderName; Data Source = DatabaseSource; Initial Catalog = DatabaseName; User = username ID; Password = password', should solve the problem. But where in my case I m still confused. The connection string above does not sit well with me.

  Can someone help me please.

  Have a look here, where I have such a picture to show how to form a string constant to connect to the database. Some subsequent posts in this thread should also be useful.

  Good luck!

  Ian

• using the KDL-46W700 how to connect to the wireless keyboard and wireless mouse

  Hello

  I use KDL-46W700 how to connect to the wireless keyboard and wireless mouse

  Unfortunately, you can not connect a keyboard wirelessly on your TV. Your TV will need a driver for this. Sad thing, it's impossible to install anything on the tv, which includes the driver for the external devices such as a wireless (except USB) keyboard... I recommend the SIDEVIEW TV application that has the remote control / function keyboard and mouse... this app is free and can be downloaded via Google Playstore... ^^.

• How to connect to the PC?

  I have problems connecting my crush to my computer. At first I thought it was the SD card, I bought at the store of the cell - I went and bought a new one, that does not work. I put both cards and reading the manual. However, when I insert my USB in my computer, I get a note saying: "the disk in drive E is not formatted. Format it now? "When I click on Yes - It then proceds to tell me to drive cannot be formatted. Now when I try to find my memory card - its completely gone! Help!

  chanondesirae

  Repeat the process of formatting your phone memory overwrite... Make sure that it is not connected to the USB cable

  See Crush online manual p. 48:...  Crush

  Tap Settings on the main screen you...

  Setting > memory > memory card > format card

  • Don't forget... so that the phone crush is connected to your computer via. USB, most of the functions of the phone do not work.
  • Phone crush also card does not appear in 'Settings' until the USB of the PC cable is disconnected

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Have you set the USB Mode mass storage on your Crush in definition... see pages 45 & 46 also in the manual to learn How to connect to the computer

  Post edited by: Poko... to include mass storage Mode information

• How can I get the plan in Jamaica

  How can I get the plan in Jamaica

  I don't know if there is workaround, but this WILL wire _might_ help

  http://Forum.luminous-landscape.com/index.php?topic=78815.0

• How to connect to the server ESXI vSphere Client side WAN?

  How to connect to the server ESXI vSphere Client side WAN?

  through firewall

  I tried to open the ports 902 903, 443... and so on...

  and I tried several sites to find the solution but...

  nothing works...

  connectivity works on local network

  Help, please...

  Source Destination Port

  ESXI 443/TCP client

  ESXi 902/TCP client

  ESXi 902/TCP Client

  ESXi 902/UDP Client

  ESXi 903/TCP client

  Edit: Also check if the firewall ESXi all IP addresses are allowed to connect:

  Example:

  See attachment...

• Satellite A200 - how to connect to the TV?

  Hi you.

  How to connect my laptop to the tv with a S - video Cable Media or VGA - RGB cable? I tried to connect by Fn + F5, but no signal goes out. If I use the VGA - RGB cable + something is comeing out on TV but its streaming.

  Kindly help me...

  Hello

  You can use two cables to connect your laptop to the TV. It s according to the interfaces on the laptop and the TV, but in both cases, it of the same:
  Connect the cable to the laptop and TV, turn on your TV and select the right channel, then turn on your laptop. After the clean boot procedure, you can switch between monitors with FN + F5.

  If you use S-Video cable make sure you are using the coding system good TV, e.g. PAL or NTSC.

  > If I use the VGA - RGB cable something's come out to TV but its streaming.
  What settings did you use (screen resolution, screen refresh rate, etc.).

• How to connect to the internet via the wireless?

  I just bought my first laptop Toshiba L10, and I'm unable to start, how do I connect to the internet using the wireless feature and no track? More frustrating is how can I connect to the internet in the first place, wireless.
  Help, please.

  Hi Phil,

  To answer your questions in full, it would be quite a task but here is my simple guide: -.

  1. connect to the internet

  1.1 choose an ISP (provider of Internet Sertvice) and get a CD with the software and the connection information.

  1.2 load the CD and follow the onscreen instructions to set up your login information.

  1.3 If you use dial-up connect your cable modem to your laptop and the other end to your telephone line.

  1.4 If you are using broadband services to connect your CODEC to your USB port and the other cable to your microfilter attached to your telephone line.

  1.5 DO NOT START YOUR INTERNET CONNECTION UNLESS YOU HAVE ANTIVIRUS RUNNING ON YOUR LAPTOP.

  1.6 Click START-> CONNECT TO-> the connection created in 1.2 above

  For the wireless connection, the procedure is similar braodly but you need a router or wireless modem connected to your telephone line and properly configured in Notepad you.

  Follow step 1.5 with a lot of attention. If you connect to the internet without anit-virus software and firewall appropriate, it will be only a few seconds before your laptop computer will be infected with a form of virus. Please be careful.

  HTH

• How to connect with the Skype name?

  I used Skype on other PCs. I try to sign in to Skype on a new computer. I can't find the place where or how enter my Skype name to open a session? How do connect me with my Skype name?

  Never mind. Found and installed the desktop version of Skype.

  Problem solved!

• How to connect to the internet with no phone service

  I cancelled the phone service to my iphone 4 and now try to erase all content and settings but it rises as unable to join the network.  My network is fine as I use it on my new phone.  How can I get this phone to connect to the wi - fi so it will erase my information.  I already removed my icloud account phone but it still shows my i.d. apple on the phone and my phone number.  How can I get this information out there.

  Use

  Settings > general > reset > erase content and settings

• Satellite L450-181 - how to connect to the TV?

  How to connect my laptop to my Toshiba regza TV?

  Hi ian guest,.

  Unfortunately, your laptop doesn t have output HDMI then you must use the VGA port on your computer. Most TVs also have that VGA port, so you can use a VGA cable to the connector on your laptop to the TV.

  If you did start two devices and select VGA (PC) channel on your TV. Press the FN + F5 key combination to switch between monitors (internal and external).

• How to connect to the list of the pins for a redeclenchables pulse train

  Hello

  I'm relatively new toDAQmx, especially for the counters. I have problems to determine what pins to plug on the DAQ card. I would like to run the vi described here, but am not sure how to connect the card. I looked at the manual of the X series for the pinout descriptions, but I don't know how they apply to the program on this page. When I connect DOOR a meter, THE, A, B pins, etc.?

  Any input on what to connect or pages that may make how to connect the counters would be very useful.

  Thank you.

  Your most recent post of links to an example more advanced sounding & I recommend that stick you with something simple to start.

  Your first post links to such an an example where the signal of pulse train going out of Ctr0_Out.  Ctr1 is used to make the trigger and the 'break' (enable / disable) Ctr0.  However, much of this stuff is configured using some features of DAQmx such that you don't need to physically connect the pins between the two counters.

  Only physical wiring that you need is to plug your physical digital trigger to the PFI1 signal and connect Ctr0_Out to some external thing must receive them.  As long as your device is called "Dev1", I think this example to work.

  I know there are some docs useful for more general info on the pins meter & behavior, but I don't remember quite so that I have not watched for them for many years.  Meanwhile, here is a * little * bit General description I wrote myself once.

  -Kevin P

• How to connect to the computer after having forgotten the password?

  Original title: PC return to me

  Hi, I appreciate any help you can give me here on this da - min pc. I had a password to get into it and I don't remember this "thing" so he used to let me in. How can I recover my pc thank you for any help you can give me

  Hello

  You don't tell us what operating system you are using.

  This is information from Microsoft for when you forgot your XP password.

  "How to connect to your Windows XP-based computer if you forget your password or if your password expires"

  http://support.Microsoft.com/kb/321305

  "What to do if you forget your Windows password"

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

  "If you forget the administrator password, and you do not have a password reset disk or another administrator account, you will not be able to reset the password. If there is no other user account on the computer, you will not be able to log on Windows and you will need to re - install Windows. »

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Other information above, we can not help you more with this.

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  See you soon.