How to convert a dynamic disk to a basic?

Similar Questions

• How to install the dynamic disk volume and base set

  I have 500 GB of HARD drive.

  How can I convert a 1 and 2 in basic and volume 3 in Dynamics.

  Please tell me something that is free of cost, and I don't want to use a software to do this.

  Hi Lynda,

  I'll be happy to help you with the problem you have with the computer.

  To create a dynamic disk volume, you must convert basic dynamic first of all disks. How to convert the basic dynamic disk?

  1. connect you as an administrator or as a member of the Administrators group.

  2. right click on my computer > manage > storage > disk management.

  3. in the lower pane, right-click the basic disk you want to convert, and then click on convert to dynamic disk. You must right-click the gray area that contains the title of the disk on the left side of the details pane.

  Warning: After you convert a disk from a dynamic disk basic, local access to the dynamic disk is limited to editions of Windows Windows 2000 at the latest. In addition, after you convert a disk from basic to dynamic disk, the dynamic volumes cannot be changed to partitions. You must first delete all dynamic volumes on the disk and then convert the dynamic disk to Basic.

  Thank you.

• Bootcamp converted to dynamic disk, now no windows without OS Macbook!

  Hello

  I converted accidentally Bootcamp (Windows 7 64 bit) the dynamic disk while I was inside Windows.

  Now, after the start of the only option I get is 'Windows', but 'Macbook' and 'Value' disappeared!

  When I choose Windows, it won't start. Windows Recovery stands up and says can not solve the problem.

  That's happened? What should I do now?

  I'm finished * off

  Thank you

  I forgot to add that no combination of keys doesn't work.

• New partition resulted in dynamic disk

  When I reduce my disk to create a new partition ehit Manager of tasks, I ended up a dynamic disk of Pentecost... because at the end he ask me... what may be the problem because the windows works just fine... tnx...

  Here is an explanation of the difference between the basic disks and dynamic: http://windows.microsoft.com/en-US/windows-vista/What-are-basic-and-dynamic-disks and here is a much more detailed and the much better version if you really want to know the differences:http://www.dynamic-disk.com/dynamic-disk-resource.html.

  If I were you, I would like to convert it to a basic training using the following procedures before you begin to add data to it and use it.

  You cannot use the task for disk partition manager or convert dynamic to the base - do it with disk management (I assume that it was just a typo).

  Here is an article on how to change a dynamic disk to a basic disk: http://technet.microsoft.com/en-us/library/cc776315%28WS.10%29.aspx.  Here is another article on the same topic:http://itsvista.com/2007/02/itsvista-tip-32-convert-a-dynamic-disk-to-a-basic-disc-in-vista/.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to use mirror Volume to a basic disk without convert dynamic disk

  I have two 500 GB Hard Drive attached to my PC running Windows 7.

  I want the software Drive (d :)) [hard drive] should be saved automatically on the other hard drive. I learned a lot from the internet about mirrored dynamic disks in volume. in this case, I need to convert the two hard disks dynamic disk.

  My question is, are at - it another way to make a record of mirror on the disk on the secondary hard drive without converting the main hard drive on the dynamic disk? [I have no problem to convert the second hard disk to dynamic disk, but I don't want the first hard to convert to dynamic disk].

  If it is not possible through Windows, is it any 3rd party software to make a backup without soldering to a different disk without conversion to dynamic disk drive?

  -Http://sites.google.com/site/mustakimali CHRISTOPHE TALUKDER

  New - mirroring (how you present) is * not * "backup."  It has similarities-, but it has flaws.
   
  -If something fried two hard drives (possible - more so in fact than only one of the burners to die a natural death) - you have lost everything if it's the only way you were protection of your data.
  -If something happens to the whole system (stolen, fire, etc.)-* poof * will the data.
  -If you're infested/infected with virus/malware - it affects * two * drives at the same time.
  -If something starts erasing/moving/replication to disk - it does both.
   
  You can mirror if you wish; It will decrease your performance in some ways.  It will not * protecting * data except under certain very specific circumstances.  I would still * very * suggest a point-in-time backup solution on * external * same media if you decide to continue with the concept of mirror.  If you really want to mirror - lay material mirror - faster resource / the less intensive/best results.
  
  --
  Martin Stanley
  MS - MVP
  --
  How to ask Questions the Smart way
  http://www.CatB.org/~ESR/FAQs/smart-questions.html

• convert dynamic disk to basic

  I have a split/dynamic volume of 2.24 TB on a file server.  I use Veeam to create replicas per day so I work in a lab environment.  The other day, I discovered that I am not at the file level restores using Veeam when using dynamic volumes.  To remedy this, I want to do a combination of the following: shrink, break the span and convert to basic.  I'll start playing now w / the reply, but I am curious to know if anyone has come across this before and if they managed to preserve the existing data as well as the permissions file/part too (pious).

  There are three ways to complete this work for you.  Links: 1 convert a dynamic disk to basic disk via the removal of all volumes from the dynamic disk. 2 convert a dynamic disk to basic disk using the Partition recovery software. 3 convert a dynamic disk to basic with NO LOSS OF DATA using the dynamic disk converter Aomei

  Cheers, your Udin

• Try to reduce a basic volume of Windows 7 on disk 0 using the new Wizard of Simple Volume, I get a warning about the conversion to a dynamic disk.

  Just bought a new laptop with Windows 7 Home Edition and decided to shrink the C: drive and create a D: drive.  Everything seems to go correctly, and I get to the 'End of Volume Wizard' screen without problem.  All the choices seem to be OK but when I click OK I get a warning that says "the operation you selected will convert selected basic disks and dynamic disks...". "I want to do this?  If I do, what are the consequences?  If I don't want to convert a dynamic disk how create a D: drive which remains a basic disk?

  Ken Dunn
  Cleveland, OH

  Hi Ken Dunn,

  Welcome to Windows 7 Community Forums

  Basic disks and dynamic disks are of two types of hard disk configurations in Windows. Most personal computers are configured as basic disks, which are the simplest to manage. Advanced users and it professionals can make use of dynamic disks, which use multiple hard drives in a computer to manage data, usually to improve performance or reliability.

  For more information, see the link below:

  What are the basic disks and dynamic? :

  http://Windows.Microsoft.com/en-AU/Windows-Vista/what-are-basic-and-dynamic-disks

  create and format a hard disk partition:

  http://Windows.Microsoft.com/en-SG/Windows-Vista/create-and-format-a-hard-disk-partition

  I hopeYou have followed all the steps to shrink a partition correctly but, you encounter a problem, carry out the task. You can go ahead and try the following steps to reduce a volume.

  1. open the Control Panel (all items view)and click the Administrative Tools icon. then close the Control Panel window.

  2 in administrative tools, click computer management , and then close the Administrative Tools window.

  3 in the left pane under storage, click disk management.

  4 in the center pane, right-click the partition that you want to shrink and click on Decrease of Volume.

  5 type in how many MB (1 GB = 1024 MB) of space to show available reduction you want to reduce the partition or volume by to use for the new unallocated space, and then click the minimize button.

  6 the partition selected (step 4) has now shrunk to create a new empty unallocated space. You can use this new space unallocated to create a new partition with.

  7 close the computer management window.

  To create a new partition:

  1. you must first to reduce a partition or a volume create an unallocated partition to use to create the new partition or volume with.

  2. open the Control Panel (all items view)and click the Administrative Tools icon. then close the Control Panel window.

  3 in administrative tools, click computer management , and then close the Administrative Tools window.

  4 in the left pane under storage, click disk management.

  5 in the center pane, right-click on the volume or unallocated partition empty and click on New Simple Volume. (See screenshot above)

  6 click on the Next button

  7 type in how many MB (1 GB = 1024 MB) you want to use from the unallocated partition to create the new partition, and then click the Next button. (See screenshot below)

  NOTE: If you want to use all of the unallocated partition to create the new partition, and then enter all the maximum specified for the partition unallocated disk space. If you use any of the maximum disk space, you can use the left in the unallocted partition space to create another partition with.

  Select an available drive letter you want to assign to the new partition in the computer, and then click the Next button.

  9 enter a volume label name that you want for the new partition, check the perform a quick format , and click on the Next button

  Click on the Finish button

  11 the new partition or volume has been created with the space in partition assigned unallocted (step 7).

  12 close the computer management window

   

  Check if you perform the same steps as above and us post if you have any other questions.

  Hope the above information is helpful.

  Thanks and greetings

  Ucef-Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think

  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/

• Mounting USB dynamic disk under Windows 7

  Hello, I have a computer that is running windows 7, 32 bit.

  I have an older hard drive of a computer windows XP I want to retrieve some files of.

  The old hard drive is a dynamic disk in windows xp.

  I have connected the dynamic disk to my computer windows 7 via a USB cable.

  Problem: Windows 7 won't let me up the dynamic disk unless I convert it to a basic disk? If I convert it to a basic disk I will lose you all data.

  Question?  How can I mount the dynamic drive USB on a windows 7 without losing any data on the dynamic disk? Do I need special software?

  Hi, Alex_703,

  Non-destructive how to convert dynamic disks to basic disks

  http://mypkb.WordPress.com/2007/03/28/how-to-non-destructively-convert-dynamic-disks-to-basic-disks/

  ...... Convert to basic without data loss

  http://blog.remyservices.NET/2010/03/24/how-to-convert-dynamic-disks-back-to-basic-disk-without-losing-data/

  How to Access or mount GPT Protective Partition in Windows XP?

  http://www.dynamic-disk.com/resource/GPT-Protective-partition.html

• Non-destructive how to convert dynamic disks to basic disks

  I instaled vista today (wd70gbwd disk0) but my (hd500g wd disk 1 backup) is offline in the management of the computer, only that I have is to transfer to the BASE. Now disk is DYNAMIC cause I had win xp before, I know that I can do but there is problem, I have too many pictures and videos on my HARD drive that I keep wonna... .so is the solution for my online HARD drive without formatig my HARD drive?

  If the solution is to get out them and transfer them or copy my hard drive via the external enclosure then format then copy it again no thanks... causes I have no external box or another xp at the mercy House!

  Non-destructive how to convert dynamic disks to basic disks

  go here and follow step by step

  http://mypkb.WordPress.com/2007/03/28/how-to-non-destructively-convert-dynamic-disks-to-basic-disks/

• Accidentally, I converted all my basic dynamic disks. How to convert in return?

  Hello

  I accidentally converted my basic dynamic disks. Now I am unable to run the system recovery. Please let me how can know I convert this return. I'm not bothered about any loss of data.

  Thank you

  Here are the instructions:

  http://www.SevenForums.com/tutorials/26829-convert-dynamic-disk-basic-disk.html

• Y we can convert dynamic disk to basic again after having already converted to dynamic?

  We all know that the default value of the hard drive is (Basic) and some timed Let's convert in cuz our uses (dynamic), my question is how can we convert in new Basic or it's impossible?

  Thank you

  It could be the case that you cannot remove the active OS partition / volume.  If this is the case, try to create a "Hirens Boot CD" and the start of this CD.  In the first start screen, choose "Mini XP.  Once it starts, follow the instructions in the following article:

  "To change a dynamic disk to basic disk back.
    <>http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/dm_revert_disk.mspx?mfr=true >

  To create a Hirens Boot CD, download the ".zip" file extract in a folder and double-click the ".cmd" file within the archive extracted.

  You will need to re - install windows after you complete these steps.

  Hirens: <> http://www.hirensbootcd.org/download/ >

  HTH,
  JW

• error when creating a new partition "the operation you selected will convert the selected disk from basic to dynamic disk...". »

  Original title: getting the error while creating a new partition

  here to create a new partition get the error "the operation you selected will convert the disc selected basic to dynamic disk... etc" Please help.

  I would like to join the screenshot of the error, how?

  Hello

  1 have had any changes made on the computer before the show?

  2. how many partitions are there currently on the computer?

  3. how many hard disks on the computer do you use?

  4. when exactly you get the error message?

  I suggest you refer to the article and try to follow the steps and check if you are able to create a partition:

  Create a new Partition on a hard disk in Windows 7

  http://TechNet.Microsoft.com/en-us/magazine/gg309170.aspx

  I also suggest you the link and attach a screenshot of the screen.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/how-do-i-post-a-screen-shot-on-this-forum/c86de820-C620-401c-A804-9f6337cd3053

• How to convert a primary dynamic partition in parthition? while I can install OS second in the other partition in the other parthition.

  Hello

  I am using windows server 2008 r2. It is installed on the c: drive.

  I have other free 25 GB which is not attributed. I want to install windows 7 on that partition.

  How can I do that.

  mark that... my machine is built on a 32-bit platform so that I can have use Hegg-v.

  I try to use the utility disk part, but due to lack of knowledge, it has end course errors.

  GUID me.

  Convert dynamic disk

  Windows must be installed on a basic disk. See:

  http://msdn.Microsoft.com/en-us/library/Windows/desktop/aa363785 (v = vs. 85) .aspx

  http://www.dynamic-disk.com/Windows-7-convert-dynamic-disk-to-Basic.html

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-basic-and-dynamic-disks

• Convert disk dynamic disk Basic without data loss on Windows 8?

  I have a laptop with a 500 GB hard drive. I have windows 8 is installed. How can I convert this disk to dynamic disk to basic disk? Is this some Partttion managers as EaseUs allow convert dynamic disk to basic disk to the disk on which the operating system is installed?

  Hi harsh,

  The disk must not have any volumes nor contain no data until you can change to a basic disk. If you want to keep your data, back it up or move it to another volume, before converting the disk a basic disk.

  Note: If you convert Dynamic Drive reader Basic with Windows installed Windows does not start.

  For more information, see change back to a basic disk dynamic disk. (Valid also for Windows 8)

  You can also post your query to Microsoft TechNet Forum for more information.

  http://social.technet.Microsoft.com/forums/en-us/home?category=w8itpro

  Hope this information helps. If you need help with Windows, let us know and will be happy to help you.

• After the reduction of volume, I get "selected Operation will convert dynamic disks.

  Disk partitioning error

  I recently bought a laptop HP with Windows 7 Home Edition Basic, wanted to shrink the C drive to create another partition. However, after the reduction of the volume, I got this error:

  Operation you selected will convert dynamic disks. You will not be able to boot the operating system from any other volumes on the disk.

  It's because win7 only supports 4 basic primary partitions and your system already has 4.

  Don't not procceed in dynamic conversion because it will cause other problems later.

  If you do not create the partion when / if you are using the HP recovery disks that will destroy any partition that you created.

  If I were you I would like to extend C to use this free space, you created i.e. cancel what you were doing in the shrinking, and then explain the purpose of the planned partition.