New partition resulted in dynamic disk

Similar Questions

• Bootcamp lost after the new partition (try to increase disk space for the window)

  I have Version OS X El Capitan 10.11.2. Here are the details on my system.

  

  So I tried to increase the space in the partition for the training camp by using disk utility. I created the new partition. But now I can't bootcamp while I restart the computer and hold down the option key. I tried this in the terminal:

  sudo fdisk e/dev/disk0

  p

  setpid 4

  07

  Pavilion 4

  p

  writing or w (tried both)

  There

  But it does not seem to pick up my bootcamp windows. I also tried to restore the mac as early date of backup via external hard drive, but that doesn't seem to help either.

  Here is the screenshot of the output. Any help would be appreciated. Thank you.

  

  Can you post the output of the following Terminal commands?

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  The "sudo" commands will prompt to enter your password, and there do not appear to come back. You can also see caution against improper use 'sudo' and the potential loss of data due to an "abuse" of the order.

• error when creating a new partition "the operation you selected will convert the selected disk from basic to dynamic disk...". »

  Original title: getting the error while creating a new partition

  here to create a new partition get the error "the operation you selected will convert the disc selected basic to dynamic disk... etc" Please help.

  I would like to join the screenshot of the error, how?

  Hello

  1 have had any changes made on the computer before the show?

  2. how many partitions are there currently on the computer?

  3. how many hard disks on the computer do you use?

  4. when exactly you get the error message?

  I suggest you refer to the article and try to follow the steps and check if you are able to create a partition:

  Create a new Partition on a hard disk in Windows 7

  http://TechNet.Microsoft.com/en-us/magazine/gg309170.aspx

  I also suggest you the link and attach a screenshot of the screen.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/how-do-i-post-a-screen-shot-on-this-forum/c86de820-C620-401c-A804-9f6337cd3053

• VMware converter 4 support for partitions on dynamic disks

  I currently have a server physical windows 2003 which has its system and data partitions defined as dynamic disks (C and D partitions lie on disk 0-dynamic) not well why it's set up this way, it was built just like that.

  The goal is to convert this virtual server and I read many forums stating that dynamic disks are not supported for vmware converter, but some cases have succeeded where the target score was a record time-basic-but-now-dynamics.

  Is this the case? and if so, what alternatives can be tried to virtualize the server.

  Dynamic disks are supported for Windows.  The resulting virtual machine will only basic disks in a hot clone.

  I would just suggest that you make a clone of hot regular and do a slight reduction in the size of the disc resulting (even if it is 1 MB).

  Second, ensure that the system starts out of the c:\ partition and it is marked as a partition active and has a file boot.ini in the root.

  Kind regards

  Jonathan

  B.SC., RHCT, VMware vExpert 2009

  NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.

• HP recovery partition and dynamic disk!

  Just got my new laptop and added a partition of my HP pavilion dv7 WIN 7 64 bit and noticed disc was dynamic. I don't know if it changed the dynamics or as it was delivered. I'll always be able to use the recovery on the dynamic disk partition? And if I create recovery discs, they will work on the dynamic disk or will it convert back to base?

  It can work with Easus software, but I'm sure that you need to remove this extra partition before conversion back is possible.

  If you need an extra partition, look HERE page on the use of the recovery partition or delete to free up hard disk to create a new partition without conversion by burning a resumption of course the value of dynamic_after.

• dynamic disk recovery issue and I cannot make a primary partition

  I have to cover, please read in full before answering a few questions. This problem started when I made another (retractable) partition on my main drive to run another operating system in a duel start setting. I made this partition, then I think that all my partitions (including recovery) computer went to dynamic. I deleted a partition, so I'm not going on the max 4 so I could do a primary, but she's still dynamic (that I made). First of all, I want to be able to make a primary partition to boot another operating system, and how can I do this without deleting my recovery? I don't want to use 3 third party software, unless they are free. Since my recovery is now a dynamic partition, can 2nd question, I still make a recovery? 3rd question, if I have to delete everything to my basic primary partitions, then can HP gives me a way to backup the recovery, or a least a way to send a recovery disk. Also, when I made the partition, I deleted the HP tools which was 200 MB partition (I think, but I don't remember), how can I reinstall it? Or it is necessary. Overall, I need to make sure that my system windows 7 will be stable with recovery and use with dynamic partitions. In addition, I have not used this program, but I was looking at a problem with a program called HxD Hex, http://www.wilderssecurity.com/showthread.php?t=191006, I did not try this because it says this sector 0 1 2 location of the partition I tried to do a primary (Hex) actually says 4f instead of 42. ANY HELP WILL BE AMAZING! At least tell me my system can be stable with a dynamic partition, and I can repeat once if something goes wrong.

  HP Pavilion DV7 4060us

  OS: Windows 7 Home Premium 64-bit

  RAM: 4 GB

  Processor: AMD Phenom II N830 Triple Core Processor 2.10 GHz

  ATI Mobility Radeon HD 5650 2676MB Total

  Him did not have a hardware upgrade.

  Yes HP recovery disks will change back, but the question is that HP Recovery Manager will not be able to burn recovery discs, or perform a system partition recovery until the hard disk is converted back to base. At least this is what I've seen other posters.

  Seems (to me anyway) the only option is to use the software I mentioned above and convert back to basic & burn recovery discs or order from HP recovery discs.

  Once you have the laptop to factory specs_use Daniel's Guide to create your new partition.

• Try to reduce a basic volume of Windows 7 on disk 0 using the new Wizard of Simple Volume, I get a warning about the conversion to a dynamic disk.

  Just bought a new laptop with Windows 7 Home Edition and decided to shrink the C: drive and create a D: drive.  Everything seems to go correctly, and I get to the 'End of Volume Wizard' screen without problem.  All the choices seem to be OK but when I click OK I get a warning that says "the operation you selected will convert selected basic disks and dynamic disks...". "I want to do this?  If I do, what are the consequences?  If I don't want to convert a dynamic disk how create a D: drive which remains a basic disk?

  Ken Dunn
  Cleveland, OH

  Hi Ken Dunn,

  Welcome to Windows 7 Community Forums

  Basic disks and dynamic disks are of two types of hard disk configurations in Windows. Most personal computers are configured as basic disks, which are the simplest to manage. Advanced users and it professionals can make use of dynamic disks, which use multiple hard drives in a computer to manage data, usually to improve performance or reliability.

  For more information, see the link below:

  What are the basic disks and dynamic? :

  http://Windows.Microsoft.com/en-AU/Windows-Vista/what-are-basic-and-dynamic-disks

  create and format a hard disk partition:

  http://Windows.Microsoft.com/en-SG/Windows-Vista/create-and-format-a-hard-disk-partition

  I hopeYou have followed all the steps to shrink a partition correctly but, you encounter a problem, carry out the task. You can go ahead and try the following steps to reduce a volume.

  1. open the Control Panel (all items view)and click the Administrative Tools icon. then close the Control Panel window.

  2 in administrative tools, click computer management , and then close the Administrative Tools window.

  3 in the left pane under storage, click disk management.

  4 in the center pane, right-click the partition that you want to shrink and click on Decrease of Volume.

  5 type in how many MB (1 GB = 1024 MB) of space to show available reduction you want to reduce the partition or volume by to use for the new unallocated space, and then click the minimize button.

  6 the partition selected (step 4) has now shrunk to create a new empty unallocated space. You can use this new space unallocated to create a new partition with.

  7 close the computer management window.

  To create a new partition:

  1. you must first to reduce a partition or a volume create an unallocated partition to use to create the new partition or volume with.

  2. open the Control Panel (all items view)and click the Administrative Tools icon. then close the Control Panel window.

  3 in administrative tools, click computer management , and then close the Administrative Tools window.

  4 in the left pane under storage, click disk management.

  5 in the center pane, right-click on the volume or unallocated partition empty and click on New Simple Volume. (See screenshot above)

  6 click on the Next button

  7 type in how many MB (1 GB = 1024 MB) you want to use from the unallocated partition to create the new partition, and then click the Next button. (See screenshot below)

  NOTE: If you want to use all of the unallocated partition to create the new partition, and then enter all the maximum specified for the partition unallocated disk space. If you use any of the maximum disk space, you can use the left in the unallocted partition space to create another partition with.

  Select an available drive letter you want to assign to the new partition in the computer, and then click the Next button.

  9 enter a volume label name that you want for the new partition, check the perform a quick format , and click on the Next button

  Click on the Finish button

  11 the new partition or volume has been created with the space in partition assigned unallocted (step 7).

  12 close the computer management window

   

  Check if you perform the same steps as above and us post if you have any other questions.

  Hope the above information is helpful.

  Thanks and greetings

  Ucef-Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think

  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/

• Cannot convert a computer unalloacted on a new space, dynamic disks are not supported by this operating system or the configuration of the server. Dynamic disks are not supported on Clusters.

  I have 179 GB of a 50 GB hard disk on a new computer allowed. Try to make a new Simple Volume I get following error "the dynamic disks are not supported by this operating system or the configuration of the server. Dynamic disks are not supported on Clusters", please suggest what to do, i run Windows 7 Home basic.

  I have 179 GB of a 50 GB hard disk on a new computer allowed. Try to make a new Simple Volume I get following error "the dynamic disks are not supported by this operating system or the configuration of the server. Dynamic disks are not supported on Clusters", please suggest what to do, i run Windows 7 Home basic.

  Need additional details as
  Is it a laptop or a pc?
  Have you coveted your dynamic disk basic disk?
  What the structure of partition on your computer?

  recover with these details...

• Repair your startup disk Bootcamp disappearing after you create the new partition

  . After some research, I found that it was the way forward to create a separate partition, and so I did another partition.

  I didn't know it would affect my Windows partition that I thought it was completely different.

  So now, when I start it up, there is no option to start with Windows. But when I boot the Mac and select Startup disk, it displays Boot Camp is still there, and all my files etc. are still there.

  I tried to create one separate partition (other than Bootcamp). After that its done and I started my computer, I found that the option to boot Windows (Bootcamp startup disk) has disappeared. But I still see boot camp Mac files. Any solution for this? Thank you.

  (I tried to find this solution on the discussion Forum, and I found: repair Boot Camp after having created the new partition, however, I'm not able to follow these instructions. any help would be appreciated)

  For reference:

  Aerospews-MBP: ~ the marcuslo list $ diskutil

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 500,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS Macintosh HD 350,7 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Apple_HFS 47.6 Untitled GB disk0s4

  5: Microsoft database BOOTCAMP 101,0 GB disk0s5

  Aerospews-MBP: ~ list of cs marcuslo$ diskutil

  No logical volume group CoreStorage found

  Aerospews-MBP: ~ marcuslo$ sudo TPG - vv - r show/dev/disk0

  See the TPG: / dev/disk0: mediasize = 500277790720; SectorSize = 512; blocks = 977105060

  See the TPG: / dev/disk0: PMBR to sector 0

  See the TPG: / dev/disk0: Pri GPT to sector 1

  See the TPG: / dev/disk0: GPT Sec at sector 977105059

  start index size summary

  0 1 PMBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 684969040 2 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  685378680 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  686648216 92929128 4 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  779577344 262144

  779839488 197265408 5 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  977104896 131

  977105027 32 table dry GPT

  977105059 1 dry GPT header

• Not able to create the new partition in disk management.

  Original title: Windows XP Home Edition Partition Question

  I tried to create another partition on my computer running Windows XP, but when I go to disk management, it doesn't let me do anything when I right click on a partition. I can't make a new (tried with cmd and disk management) and I can't change the current criteria. Is there an option somewhere that prevents you from changing or something? Almost many of the options are grayed out and I can't make a new partition. How can I fix? I want to make another partition.

  Hi JwadAziz,

  Windows XP doesn't support narrowing of the reader.

  You can use your favorite search engine & download any third-party software that might be used to.

  
  Note: this response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there.

  Hope the helps of information.
  Please post back and we do know.

• When installing a new operating system isn't automatically wipe the hard disk, create a new partition, and then install the operating system?

  Have a Dell system, caught a virus and it has really messed up the PC. Recently, it got worse so I tried to reinstall the operating system with the Dell disks. It wouldn't work. So I bought for Windows 7 Professional, it will not be installed. My first question when installing a new operating system isn't automatically wipe the hard disk, create a new partition, and then install the operating system? Because this does the same as the Dell disks, is to take what is on the hard drive and put it in a folder called windows old, is not formatting the HD. When I boot the disk, it shows the installation of files then open windows and start the installation. Before he could finish I get an error missing or corrupted files. Tried several times now, windows will still not open. Any suggestions? Once while trying to install the pc crashed with a blue screen which is one of the reasons why I have reinstall the OS, he started to plant a few times. I don't remember all the details on my PC, but its 4 years, triple core coprocessors, ram 8 GB, 500 GB HD. At the same time just after all this started in Jan. I had also improved my 3 GB to 8 GB memory. I bought the Dell memory for my system. Since the crash, could there be a problem with these new memory chips? Last night I tried to disassemble each and reinstalling it, but that doesn't seem to make a difference. Before I tried to reinstall the operating system, the pc was see the concert 8.

  Original title: used to install Windows 7

  Disconnect any other (additional) internal hard drives and external USB devices.
  Look for any loose hard drive power or cables SATA, graphics card or other power cables.

  First run Memtest86 +:
  It runs from a floppy disk or CD and should eliminate or confirm if one or more of your memory
  sticks are bad or the values of the SPD in the BIOS are correct.
  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), so no errors at that time then your ram is OK.
  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  Hard drive test:
  If you do not know your readers of the brand and model, try "Speccy",.
  It provides information from the computer/system in detail:
  OS, CPU, RAM, motherboard, graphics, Hard Drive, optical, Audio, peripherals, network.
  Note: Option RAM indicates number of slots, DRAM Timing.
  Works your memory speed (frequency). The nominal frequency of your memory.
  http://www.Piriform.com/Speccy

  Test your player - create a Bootable CD:
  Ranging from 5 to 25% (depending on the make and model) new hard disks are defective.
  Note: Reliability of the drive hard has come the way down over the last 24 months and improved a bit lately according to manufacturing.

  Test your drive with the car manufacture utility.
  If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools
  (bootable CD) and check bad sectors.
  SeaTools for information: http://www.seagate.com/support/downloads/seatools/
  SeaTools for Windows download: http://www.seagate.com/support/internal-hard-drives/enterprise-hard-drives/saturn/seatools-win-master/
  SeaTools for DOS download:
  http://www.Seagate.com/support/internal-hard-drives/consumer-electronics/LD25-series/SeaTools-DOS-master/

  For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm

  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who believe that having a brand Toshiba Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities

  Notice of Fujitsu drive management utility: http://www.fujitsu.com/us/services/computing/storage/hdd/

  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  Also check Home Edition free Partition Wizard option "Test of disc surface":
  http://www.partitionwizard.com/free-partition-manager.html

  J W Stuart: http://www.pagestart.com

• Cannot create a new partition of drive c through disk management

  Hey... !!! r

  am using the windows operating system 8. I try to create the disk partition with disk management option, I find no option to do so. It says "connecting to virtual disk service" and no response.  help me how to create readers D E F.

  Hello

  You can create the new partition of the available free space. For example, if you have 1 TB in C and suppose that 500 GB is free, you can do a right click on C in disk management and select reduce the Volume. Make sure that you have selected the new volume lower than the space available for free so enter you anything according to your requirement, but be sure that it is less than 500 GB. In seconds, you have new volume, call it as D or whatever you want. Similarly, you can create E, F and so on.
  Hope this helps, good luck :)

• New partition formatting is not possible!

  I use Win7 Pro and that you have a standard installation of toshiba plant. I have reduced the size of my Partition C and you want to create a new 60 GB for my data partition. The free space is 65,43 GB unallocated space directly after the main C (152,38 GB) partition.

  I'm using the standard tool for the management of partitions in Windows Control Panel.

  Every step is behaving normal Nigerian I am trying to format the new partition. The message error is "there is not enough free space on the disk/disks. I tried to format a smaller portion of the free space, IE 1, 5 or 10 GB, but still the same result.

  Anyone with a good idea?

  concerning
  Carpet

  Prior to do any create a recovery media and make backup recovery image. How to do this you can read in the document of the user manuals. It is very important. After having changed the structure of partitions, you can have problems with HARD drive recovery facility, especially if you are trying to format this partition of 10 GB recovery.

  As far as I know, you can reduce the C partition and create the new partition. I tested it today on my machine and everything works fine.

• Y we can convert dynamic disk to basic again after having already converted to dynamic?

  We all know that the default value of the hard drive is (Basic) and some timed Let's convert in cuz our uses (dynamic), my question is how can we convert in new Basic or it's impossible?

  Thank you

  It could be the case that you cannot remove the active OS partition / volume.  If this is the case, try to create a "Hirens Boot CD" and the start of this CD.  In the first start screen, choose "Mini XP.  Once it starts, follow the instructions in the following article:

  "To change a dynamic disk to basic disk back.
    <>http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/dm_revert_disk.mspx?mfr=true >

  To create a Hirens Boot CD, download the ".zip" file extract in a folder and double-click the ".cmd" file within the archive extracted.

  You will need to re - install windows after you complete these steps.

  Hirens: <> http://www.hirensbootcd.org/download/ >

  HTH,
  JW

• I need help to create a new partition of the drive c. main on my laptop

  OK, I already tried to create a new partition and it did, but the new partition I created has become "unallocated" I don't know why, I have read the information online and they say that you cannot remove a player from the "unallocated" partition, so I am trying to create a new partition on this drive "unallocated". when its almost finished, I get warning all the time

  the operation you selected will convert the disk from basic to dynamic disk selected s. If you want to convert the disks to dynamic disks, you will not be able to boot operating systems from any volumes on the s drive (except the current boot volume). Are you sure you want to continue?

  I want to create a new partition on this disc, please help

  When I click Yes, it brings an error message saying, the 'dynamic disks are not supported on this operating system.

  I use Windows Vista Home premium

  http://www.Vistax64.com/tutorials/95398-disk-management-shrink-partition.html

  http://www.Vistax64.com/tutorials/95418-disk-management-delete-extend.html

  Good info on above links.

  Read the related links section, also.

  Unallocated space is what it says it is: nothing.

  Normally, you right click on your existing drive > extend the Volume > makes a great.

  Or follow the instructions at the link above to make a second Partition to unallocated space...

  See you soon... Mick Murphy - Microsoft partner