How to convert a paralytic to a VAPP model so it can be added to a catalog

Similar Questions

• I need a step by step instructions on how to convert a PDF file to Microsoft word, so I can change it

  I need a step by step instructions on how to convert a PDF file to Microsoft Word, so I can modify it.

  Hello Sharon,

  Here is a quick guide:

  1. log-in to cloud.acrobat.com

  2. click on the tab PDF export

  3. click on the big blue button labeled as "PDF files selected for export

  4. a Pop up window appears, you must click on "Choose the files on my computer" and select the file to convert.

  5. click on continue and then click on the button "export to Word.

  You will be asked to download the converted file once finished the process of file conversion.

  Kind regards

  Rahul

• I have video saved in my phone as .3GPP and unable to pay in my PC. How to convert it into a common format so that I can share it with my friends

  I veod .3gpp format how to convert it into an appropriate format

  Hi Das,

  Thank you for using Microsoft answers Forums!

  Can I play this type of file in Windows Media Player?

  The .3GPP is a type of media file that is not supported by the player, unless you acquire additional software:

  3GPP multimedia. Ringtone/video files with .3gp file name extensions are usually present on Windows Mobile devices. You can download DirectShow on Internet filters that allow you to play the ringtone file in the drive. Remember, however, that some filters can introduce instability with your computer or programs in general. Ensure that the filters are a reliable supplier of software before downloading.

  You can use your favorite search engine and download DirectShow filters for your computer. You can also search the internet for some third-party software using your favorite search engine to convert the GP 3 or 3 GP player file to a wmp file and install it.

  NOTE: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope this information was useful.
  Let me know if it worked.
  All the best!

  Thank you and best regards,
  R uma - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to convert an mp3 file to a file rtext? Can I use windows media player to play mp3 and have the recigition speech to convert to text?

  Can I use windows media player to play mp3 and have the recigition speech to convert to text?

  You can get on a conversion of 70% in reading a file in Windows Media Player using something like Dragon Naturally Speaking to convert. If you set the playback speed to slow in Windows Media Player to play > play speed, you will get a better result. The best option is to download the file to an audio transcription service, but which generally costs 0, 50-1, 00 per minute of audio.

• How to have a dynamic number of tables where new rows can be added

  Hello
  I'm new to ADF and have a task where I on a single page should I show that a dynamic number of tables and each table below should show some fields and create a button to create new lines in the table. To be more precise each table show an education for the individual and the rows of the table shows the meanders of specific education.
  I thought to use a treetable but don't think it's the right way to go because of the new line add feature - I'm not sure of the combination of having a dynamic number of tables and the ability to create new lines of each table.
  If you know where I can find a model similar to the one above or just give me your opinion on how to solve it, it would be much appreciated.
  I get the data from a Web service.

  This is a small sample.
  It could be improved for more information.
  work for you?

  Class Education
  public class {education
  private string ID;
  description of the private channel;
  private list class ArrayList = new();
  Public Education() {}
  }

  {} public void setId (String id)
  This.ID = id;
  }

  public String getId() {}
  return the id;
  }

  {} public void setDescription (description of the chain)
  This.Description = description;
  }

  public String getDescription() {}
  return description;
  }

  public void setCourses (list of courses of ) {}
  This.courses = run;
  }

  public getCourses() {list
  return of the course;
  }
  }

  classroom

  public class {course
  private string ID;
  description of the private channel;
  teaching of teaching private;
  public Course() {}
  }

  {} public void setId (String id)
  This.ID = id;
  }

  public String getId() {}
  return the id;
  }

  {} public void setDescription (description of the chain)
  This.Description = description;
  }

  public String getDescription() {}
  return description;
  }

  {} public void setEducation (education)
  This.Education = education;
  }

  Public Education getEducation() {}
  return of education;
  }
  }
  Managed Bean

  public class {Manage
  private list of educations of ;
  selectedEducation of teaching private;
  selectedCourse of course private;

  public Manage() {}
  educations = new ArrayList ();
  for (int x = 1; x)<= 10="" ;="" x++="" )="">
  E education = new Education();
  e.setId(""+x);
  e.setDescription ("education" + x);
  for (int i = 1; i)< 3;="">
  Class c = new Course();
  c.setId (e.getId () +'.) » + i) ;
  c.setDescription (e.getDescription () +": courses"+ i);
  e.getCourses () .add (c);
  }
  This.Educations.Add (e);
  }

  }
  public String actionAdd() {}
  Add the code in the event here...
  TODO invoke the web service proxy to add courses
  Class c = new Course();
  c.setId (this.selectedEducation.getId () +'.) (' + (this.selectedEducation.getCourses () .size () + 1));
  c.setDescription (this.selectedEducation.getDescription () +": courses"(this.selectedEducation.getCourses () .size () + 1));
  this.selectedEducation.getCourses () .add (c);
  Returns a null value.
  }

  public String actionQuit() {}
  Add the code in the event here...
  TODO invoke the proxy web service to stop the course of education
  int index = this.selectedEducation.getCourses () .indexOf (this.selectedCourse);
  this.selectedEducation.getCourses () .remove (index);
  Returns a null value.
  }
  public void setEducations (list of educations ) {}
  This.Educations = educations;
  }

  public getEducations() {list
  TODO invoke the web service proxy to get educations
  return of the educations;
  }

  {} public void setSelectedEducation (selectedEducation education)
  this.selectedEducation = selectedEducation;
  }

  Public Education getSelectedEducation() {}
  Return selectedEducation;
  }

  {} public void setSelectedCourse (course selectedCourse)
  this.selectedCourse = selectedCourse;
  }

  public class getSelectedCourse() {}
  Return selectedCourse;
  }
  }

  JSPX

  
  
  xmlns:h = "http://java.sun.com/jsf/html".
  xmlns:f = "http://java.sun.com/jsf/core".
  xmlns:afh = "http://xmlns.oracle.com/adf/faces/html".
  xmlns:af = "http://xmlns.oracle.com/adf/faces" >
  
  DOCTYPE system = "http://www.w3.org/TR/html4/loose.dtd".
  doctype-public = ""-/ / W3C / / DTD HTML 4.01 Transitional / / IN "/ >"
  
  
  
  
  
  Content = text/html"; charset = windows-1252 "/ >"
  
  
  
  
  
  
  
  
  var value = "#{Education.courses}" = "course" rows = "5" "
  strips = "row" bandingInterval = "1" >
  
  
  
  
  
  
  
  
  
  
  
  
  to = "#{Manage.selectedEducation}" / >
  
  
  
  
  
  to = "#{Manage.selectedEducation}" / >
  
  to = "#{Manage.selectedCourse}" / >
  
  
  
  
  
  
  
  
  
  
  
  

  faces config xml

  
  "- //Sun Microsystems, Inc.//DTD JavaServer Faces 1.1 Config / / IN".
  "http://java.sun.com/dtd/web-facesconfig_1_1.dtd" >
  
  
  manage
  com.test.Manage
  session
  
  
  Oracle.ADF.Core
  
  

• How to convert a dynamic disk to a basic?

  How to convert a dynamic disk to a basic? I can't really deleat the C and readers of the system, and if so, how?

  Hi Brad,

  Welcome to Microsoft Community and thank you for the query display.

  According to the description, it seems that you want to convert a dynamic disk to Basic.

  However, we need more information about the issue to help you better.

  Please help me to answer these questions.

  1 how many partitions are on the hard drive?

  2 is installed Windows on drive C?

  3. you have any operating system installed on the hard drive?

  To convert the dynamic disk to basic, here are some steps that you can try.

  You can try to convert the dynamic disk drive basis (except your drive C :) using the Diskpart.exe in the command line. By following these steps, you can avoid reinstalling Windows XP. But if you want all the hard disk as a single partition, then proceed as follows.

  Note: Before formatting the hard drive or perform the steps, back up your data to an external storage device.

  Steps to convert dynamic disk to basic
  

  a. press Windows key + r on the keyboard and in the immediate window, type cmd.exe

  b. in the command prompt and type D iskpart .

  c. at the Diskpart prompt, type list disk . Note the number of the disk you want to convert to dynamic.

  d. at the Diskpart prompt, type select disk . (select the dynamic disk you want to convert.)

  e. at the Diskpart prompt, type clean to remove all volumes on the disk.

  (f) then, at the Diskpart prompt, type: convert base to begin to restore the disk to basic training.

  Respond us if you have any queries with hard drive problems and we will be happy to help you.

• How to convert a .jpg file lists to text

  I need to compare two lists of names of .jpg via the function VLOOKUP of Excel files. There are approximately 20 000 jpg files in each list. How to convert jpg text file lists only if the text can be copied in Excel 2010? Any help will be greatly appreciated.

  I need to compare two lists of names of .jpg via the function VLOOKUP of Excel files. There are approximately 20 000 jpg files in each list. How to convert jpg text file lists only if the text can be copied in Excel 2010? Any help will be greatly appreciated.

  You must use an OCR (optical character recognition program).

• How to convert Date months in the database that points to the EBS, DWH not.

  Hi friends,
  
  We intend to create reports in OBIEE and the Source is EBS. This means that we do not want depends on Datawarehouse and Informatica and OBIApps. Simply create us some reports and that they refer to the EBS database.
  
  End of test, we took an HR report and it contains under columns:
  
  Months (Sun)
  Revenue by Division (Fact)
  Average cost per numbers of workforce (Fact)
  
  In my little survey, we found that the income column is of EBS: GL_BALANCES. And we have configured the base of W_Day_D table in DAC has no column months in EBS (not sure).
  
  Come to my problem, how can I call the month column in my data base stressed EBS. How to convert the Date months in my database.
  
  I can deceive me, but someone please look into this... How can I create columns for this exact report of OBI in EBS database instead of DwH.
  
  Thanks in advance...
  
  Raghu Jen7782

  Just confused here.

  Hang on, if I get it, you want to create report based on columns of EBS directly then using rt BI applications?

  There is then no question of using the W_DAY_D table then.

  Follow

  As long as you have Date column, you can use DB functions to convert them into months (just use the string SUBSTR to extract the month and the year).
  Create your own query instead of using the tables of BI APPS and try to bring a hybrid product.

  Sorry I'm wrong in the understanding of your needs, if I had properly then do the steps above.

  Mark correct or useful if this can help,

  Kind regards
  Rayan Vieira

• How to get VAPP model mem and CPU information processing

  Hi people,

  As part of the development of a workflow approval to instantiate a vApp, I need to shoot the details of memory and cpu for a VAPP model to vcloud director, which lies in a catalog.

  I'm not finding any option under "VclQueryResultAdminVAppTemplateRecord" in the search for the API.

  Please advise.

  Unfortunately, this info is not available when the Instantiate vAppTemplate task is blocked. My team has reported that genius and asked that these additional information made available via the api. Here is an example of the level of information that we can currently extract in this task of blocking:

  User

  • Name: jdoe
  • Description:
  • Full name: John Doe
  • E-mail address: [email protected]
  • Phone number: (555) 555-1212
  • Instant Messenger ID:
  • Quota VM has deployed: unlimited
  • Stored the Quota VM: unlimited
  • Role: VAPP author

  vApp

  • Name: vApp_jdoe_4
  • Description:
  • VDC: Demo-Org-vDC
  • Created: Saturday, February 11, 2012 02:14:05 GMT - 0000 (UTC)
  • Number of virtual machines: 2
  • Disk size: 9728 MB
  • Rental storage: Saturday, February 11, 2012 03:14:05 GMT - 0000 (UTC)

  VM

  • Name: XP-Pro-TEMPLATE2
  • Guest OS: Microsoft Windows XP Professional (32-bit)
  • Network name: Test-NAT-routed

  VM

  • Name: blanktest
  • Guest OS: Microsoft Windows Server 2003, Standard Edition (32-bit)
  • Network name: Test-NAT-routed

• Edition VAPP model?

  If a newcomer in vCD (a little late, of course). I gave an environment able to play with in a test environment. I have everything set up, and I am now at the point where I want to set / import a model and play with this deployment. Here is what I tried

  1. Imported a VM model in a catalogue of vDC organization vCD, tried to change it...
  2. Created a new model of vApp, tried to change...

  In both cases each setting, except the profile of storage on the general tab and the metadata tab is grey. Ideally, the model that I imported vsphere would be good to go, but necessary configuration changes.

  Is it normal?  If this is the case, is the right way to change patterns of vApp to

  1. deploy a model of vApp to a paralytic
  2. Make the necessary changes to the vApp
  3. Re - capture the VAPP as VAPP model

  .. or am I missing something?

  Yes you are right.

  If you want to make basic changes you can do (as the name, description and other things). For advanced level, you will need to add to your cloud, make changes, and convert it back into a vApp model.

  Visit this link for the official VMware vCloud Director Documentation Centre

  maybe possible by powercli for vcloud, but not too sure about that.

• How to create VMS of vapp model

  looking at the sample code in HellovCloud.cs, it shows how to create a VAPP model and which allows to create a paralytic, but can anyone provide an example of how select a model of VAPP existing and which allows to create a paralytic? If there are already examples of code, please point me to it. Thank you.

  Think I might have answered this in another thread for you - but in case others are looking...

  Hope this helps, by using the .NET SDK:

  Load the VCC you want to put TIME in

  VCC Vcc = Vdc.GetVdcByReference (customer, vdcReferenceUrl);

  Load the model you want to use

  Model VappTemplate = VappTemplate.GetVappTemplateByReference (customer, templateReferenceUrl);

  InstantiationParamsType instantiationParamsType = new InstantiationParamsType();

  InstantiateVAppTemplateParamsType = new InstantiateVAppTemplateParamsType stuff

  {
  AllEULAsAccepted = true,
  name = "the name of vapp",
  Source = model. Reference,
  deploy = true,
  Description = "description"
  InstantiationParams = instantiationParamsType,
  };
  Method to create he created... the app returned will not be usable for a while, but you can get the jobs for her and for the status of charging

  VAPP app = Vcc. InstantiateVappTemplate (stuff);

• How to convert pictures from iPhoto?  I need general info and advice.  My library is huge (95 GB).  I am running OSX El Capitan 10.11.6 on iMac.

  How to convert pictures from iPhoto?  I need general info and advice.  I saw the help info but I am very nervous to take on this project, as my library is huge (95GB), organized in several events and albums.  My library is saved (Time Machine SimpleSave HD).  I am running OSX El Capitan 10.11.6 on iMac.

  Have you seen this document?   Updated Photos for OS X - Apple iPhoto support

  https://support.Apple.com/en-GB/HT204655

  Is your iPhoto Library Library on your system drive in the pictures folder? And you have a lot of free space on your system drive? The migration will need additional temporary storage.

  Then drag the iPhoto library icon pictures open to create a new library of Photos of her.

  Your albums appear unchanged in the Photos.  Events will appear as additional albums, because the pictures has no events.  See this link: How Photos handles content and metadata for iPhoto and Aperture - Apple Support

• How to convert WAV, Alac

  How to convert WAV to ALAC files.

  1. Select Apple Lossless as your chosen import format using edit > Preferences > import settings.
  2. Choose files to convert.
  3. Use file > convert > create the Version Apple Lossless.

  TT2

• How to convert .pdf to .epub

  Please see me step by step how to convert .pdf to .epub

  Hello PrasanW.

  Thank you for using communities Support from Apple. I see your message that you want to convert PDF files into ePub files.

  Read this article.

  Creating ePub with Pages files

  Have a great day.

• How to convert mp3 to acc in new itunes file 12.4?

  How to convert mp3 to acc in new itunes file 12.4?

  Annoydc,

  Read: Re: suddenly I can't right click to create Mp3s in iTunes.