How to convert primary partition in system partition to start windows 7?

Similar Questions

• How to convert my version of Photoshop CS 4 for Windows to Mac

  How to convert my version of Photoshop CS 4 for Windows to Mac.

  You are not likely to be able to convert your CS4 license / Windows to Mac version.  Platform conversions are supported only for current releases, that would be CS6.  Creative cloud subscriptions allow one or two platforms will be supported.

• Primary partition deleted in Windows Installer

  and now I'm stuck.

  Long story short: I wanted to make a completely clean install of Vista on my Acer Aspire 6930, delete all my data in the process. So I used the factory Acer reset tool that seems to work, but then got stuck in a boot loop where he continued in the recovery to start tool and would not proceed.
  I could find some installation disks of Vista to boot from and do a clean install. He went through much of the progress, but failed. I tried again but accidentally deleted the primary partition on the stage "where do you want to install Windows?
  Now there are no partitions to select. The only available option is to load the drivers, but they are not all the drivers on the installation disc.

  Now, I don't know how to proceed. I can enter the command prompt and run the part of the disk, but I don't really know what I'm doing there. list disk indicates:
  Size of the disk # free status
  Disk 0 online 298 GB 0 B
  No disk 1 no media 0b 0b
  Disc 2 online 7634 B 0 B

  I solved my problem. I had to do a cleaning of the disk and create a primary partition using DISKPART. Installation went well after that.

• How to convert the MBR to GPT to work around Windows Installer error bootcamp

  Hello

  I have a problem as a previous post (8.1 to Windows Installer on iMac with drive fusion, GPT partition error):

  "Hello,

  I have tried to install windows via bootcamp on my iMac and can't seem to fix the "Windows cannot be installed to this disk. The selected disk is the GPT partition style' error.

  I successfully completed all the steps until I'm in Windows Setup and select the partition on which Windows should be installed. I get the error "Windows cannot be installed to this disk. The selected disk is the GPT partition style. "I formatted the partition, but I still get the same error. »

  Trying to get this resolved as soon as POSSIBLE. I have a MacBook Pro 8.2 (early 2011). El Capitan installed. I already disabled SIP. Try to install Windows 10, if possible, or 8.1 if and then to 10. The target volume is disk0s4. I was able to successfully create a Setup disk Windows 10 USB (even on my MBP 2011), thanks -windows-to-create-the-usb-flash-drive-for-mountain-lion-with-updated-boot-camp/ https://mihail.stoynov.com/2013/04/22/force-boot-camp-into-using-an-iso-image-of

  I tried to look around in this forum and elsewhere to solve my problem. I have met help desk 'Loner' of T and hope he can ring for my case. Here is the result of the following commands in a Terminal:

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  In addition, I downloaded gDisk but I can't seem to be able to select all the options. Be waiting for instructions.

  Thanks in advance.

  Best,

  Gabriel

  Last login: my Apr 25 14:24:12 on ttys000

  dGabriels-MBP: ~ the gabrielaxel list $ diskutil

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 1.0 TB disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS Axel HD 937,5 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft Windows 61.7 GB disk0s4 data base

  / dev/disk1 (external, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: FDisk_partition_scheme * GB 15.6 disk1

  1: DOS_FAT_32 WININSTALL 15.6 GB disk1s1

  Gabriels-MBP: ~ list of cs gabrielaxel$ diskutil

  No logical volume group CoreStorage found

  Gabriels-MBP: ~ gabrielaxel$ sudo TPG - vv - r show/dev/disk0

  Password:

  See the TPG: / dev/disk0: mediasize = 1000204886016; SectorSize = 512; blocks = 1953525168

  See the TPG: / dev/disk0: MBR suspicious to sector 0

  See the TPG: / dev/disk0: Pri GPT to sector 1

  See the TPG: / dev/disk0: GPT Sec at sector 1953525167

  start index size summary

  0           1         MBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 1831009760 2 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  1831419400 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  1832688936 120574048 4 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  262151 1953262984

  1953525135 32 table dry GPT

  1953525167 1 dry GPT header

  Gabriels-MBP: ~ gabrielaxel$ sudo fdisk/dev/disk0

  Disk: geometry / dev/disk0: 121601/255/63 [1953525168 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 1023 254 63 - 1023 254 63 [1-409639] < unknown ID >

  2: AF 1023 254 63 - 1023 254 63 [409640-1831009760] HFS +.

  3: AB 1023 254 63 - 1023 254 63 Boot Darwin [1831419400-1269536]

  04:07 1023 254 63-1023 254 63 [1832688936-120574048] HPFS/QNX / TO THE

  Gabriels-MBP: ~ gabrielaxel$

  Hello again,

  Due to the time constraint, I went ahead and had a run of luck the orders gdisk on mine. My Bootcamp partition is disk0s4. I get the following error:

  Complete control of the final. About to write data of TPG. THIS WILL OVERWRITE EXISTING

  PARTITIONS!

  Do you want? (Y/N): Y

  OK; new partition table (GPT) GUID written/dev/disk0.

  WARNING: Open with shared lock devices will not have their

  table partition automatically reloaded!

  Failed to open device ' / dev/disk0 ' for writing! Errno is 1! Abandonment of writing!

  Is it just b/c that I can't make these changes on the disk I am running off?

• How to convert 3ga files so that they play on Windows?

  changed title: Samsung Galaxy Player 5.0 8 GB Media Player

  I have the Galaxy G3 phone and I would like to share my voice recordings (which are 3ga files) on my laptop. How to convert this file so that it will play on iTunes or Windows Media Player?

  Frustrated,

  Isake

  I just rename 3ga in mp3 format, then it works well

• How to convert MOTN .aep? help please, worker of windows... Thanks in advance!

  help please, worker of windows...

  How to convert MOTN .aep?

  Thanks in advance!

  If the file is in Motion 4.0 or an earlier version, you can import the Motion project in After Effects using the file > import > import After Effects Pro command. This does not work for Motion 5.0 projects, since Apple has radically changed the format of project file.

• How can I stop the quick loading when I start windows?

  I right click on the taskbar and unchecked it I also right click on the taskbar and has tried to stop some loading toolbars but whenever I restart my computer they reload. How can I stop their reloading? I appreciate any help I can get with this problem. Thanks in advance.

  Hello

  You can stop some programs from loading when the system starts by disabling startup items in the Configuration of the system. Follow the steps mentioned below to open the system configuration.

  a. Click Start and then click Run.

  b. click on the Startup tab and uncheck the program you want to load during startup.

  c. click on apply and then OK.

  d. it will disable the programs loading at startup.

  You can also right click and remove programs from the startup list which is present in all programs. Follow the steps mentioned below.

  a. Click Start, click all programs.

  b. Click Start and the right on the program that appears in the list and the removal of the location.

  You can also view the article mentioned below.

  How to disable programs that run when you start Windows XP Home Edition or Windows Vista

  http://support.Microsoft.com/kb/270035

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Computer recently downloaded and tried to run a update and system now cannot start Windows

  As the title suggests, there was a failed an automatic update attempt.  System attempted to automatically repair the problem, couldn't.  I tried to restore to a checkpoint before the update attempt.  This was failed several times.  Each time the system reboots and the tent to start windows but ends with the blue screen crash every time.

  I am able to go into windows in safe mode, but it ends up doing what I was doing outside of windows.

  The blue screen is not displayed for a long time, but when he does has what I think is an error code or something... This code is always the same - as I saw it several times, I managed to write it: 0x0000007F.

  Any ideas?  Help!

  Thank you

  The f

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  And read this:
  

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understanding Windows Update and Extras in Windows Vista at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• How to convert the partition to binary format

  When I submit score, score send to a php file with binary

  use:

  var binary_score:String = decimal_score.toString (2);

• How to convert VM installable operating system?

  Hello

  Is there a software that allows to convert a device to the virtual machine to an installable operating system?  For example, the virtual mackines found on http://www.turnkeylinux.org/.

  Thank you.

  Hello

  I'm not aware of any industrial solution for your needs. But why not use the Linux distribution used to build this virtual machine? On their website, turnkey Linux is based on Ubuntu 10.04.1 LTS.

  Good luck.

  Concerning

  Franck

• How to convert a WPL of music file in my Windows 7 to an MP3 for a Sandisk Clip Sport formart

  Song downloaded to Windows 7 Media Center. It is a WPL format, but I can't play on my SanDisk Clip Sport MP3 player because the player does not support this file format. How can I change the WPL to MP3 format?

  Hi Natalie - WPL is a playlist file and cannot be converted to mp3 because it contains only pointers to the actual music files. You need locate the actual music files and transfer them from there. (They may not be no need for conversion - it depends if they are in a format supported by the SanDisk card - it seems to support usual ones).

  Cheers, Ric.

• How to convert numbers from decimal to binary in the Windows 7 calculator

  Hi how I can convcert numbers from decimal to binary using the calculator of windows 7

  1. launch the calculator
  2. click on 'View', then select 'programmer '.
  3. click on the 'Dec' option box on the left side.
  4. Enter your decimal number.
  5. click on the radio button 'Bin' to convert from decimal to binary.
  6. the binary number is displayed.

• How to convert old Outlook Express (.idx files) contacts in Windows Live.

  I DON'T HAVE THE OLD COMPUTER TO USE TO EXPORT THE CONTACTS!  I HAVE ONLY THE. IDX FILES.

  I have a copy of the files from a computer that is running outlook express was .idx.  The computer broke down.  Now I have a computer with Windows 7 and Windows Live Mail.  I need to convert or import these files .idx in my new computer.  Programs or suggestions on how to achieve this.

  Thank you

  An Outlook Express address book is a .wab file. An IDx file is a video file. I don't know how you saved it as such, or a way to convert it.
   
  IDX files
  http://www.FileInfo.com/extension/IDX
   
  
   
   

• How to turn off the beep system at the start of the vm?

  Some of my virtual machines are very inconvenient system beeps during their start-up phase. How can I disable this? I found a solution that says add the line mks.beep = "FALSE", but then I get an error message when the virtual machine starts saying 'Invalid parameter for mks.beep, using 'TRUE' default' or something like that.

  The entry you mention shoud read mks.noBeep = "true". See http://www.sanbarrow.com/vmx/vmx-advanced.html

  André

• How can I perform a recovery system on a laptop Windows 8?

  I found this video that details the procedure to perform a system recovery in Windows 8 and thought that I'd share it.

  I hope this video helps some who may have questions about a recovery in Windows 8.