How to copy a hyperlink and make moving image work
Hi all
I created a hypertext navigation, rather like a table of contents, for our presentation of the iPad and we would like to have on individual items on each page. It is quite large, so it is in a floating, accessed framework since a MSO (Menu button). It works great on the first article, but when I copy and paste the DSO for master pages for the other articles, none of them work.
I work in InDesign 5.5. I understand that I can create buttons with the navto: / / command, all with the text of the group block and who enter as part of content to have a navigation scroll, and the buttons with navto controls are less likely to break, but is there something else I forget?
It seems illogical that can not copy and paste as hyperlink folio names and page numbers have not changed. However, I note that InDesign assigns a number after the name hyperlink in the hyperlinks Panel. I tried to rename the hyperlink to its original name (with no number) and it adds a different number at the end.
I'll probably start course button, but I thought it was a valid discussion to begin.
Thanks a lot for your time ~.
So, I thought about it. Hope this helps someone else because it took me HOURS to fix.
I deleted all of the hyperlinks in the control panel and went on the creation of each of them from scratch, using the hyperlinks - new icon link at the bottom - so that I have the option to deselect the 'shared target of hyperlink' which is always checked, unless you uncheck the box, simple, gosh darn link.
(They might mention this bit of info somewhere. I sure couldn't find.)
Worked like a charm. Hallelujah.
See you soon ~
( :
Tags: Digital Publishing Suite
Similar Questions
-
How to copy a layer and its mask layer to another image?
With the help of PSE9, how a copy a layer and its mask layer to another image?
Online Help includes a topic on how to copy a layer but try the different methods in the help topic results in either nothing copied or just the layer without his mask layer is copied. Thank you.
How did you get a copy? If you float your images so that they are both partially visible in the work area, make one with the being copied the active layer. Then, drag the layer in the layers palette on the other image. Now you should have both the layer mask on the second image.
Jürgen
-
the new firefox open my home page in addition to the start page of firefox, everytime I open firefox. How can I stop this and make sure ONLY my home page shows?
Delete the USER. JS file if there is (some plug-ins create in addition to prefs.js).
-
How to copy a photo and put it on Facebook?
How to copy the picture and post it on Facebook
Hi Janice King.
This link explains how to upload a photo on facebook: http://www.ehow.com/how_2302401_upload-photos-facebook.html -
How can I remove background and make it transparent?
How can I remove background and make it transparent?
The tutorial below shows you how to remove the background around a figure.
For more simple images, you can try this tutorial, instead:
I hope this helps and please let us know if you have problems with the steps!
-
How to copy phone numbers and paste them into the Dialer?
Hello everyone!
I posed in the title, how can you copy phone numbers and paste them into the Dialer to make calls?
Thank you!
I can't send a report - I am a normal user like you but I was help other owners for awhile better as I can - to contact Sony care use this link http://www.sonymobile.com/global-en/support/contact-us/
-
Hi, I just want to know how can I create custom underscore and make a style, so that when I apply it to the text it right to point out that the article selected
As long as no other character style is applied, you can create and apply a character style that is completely empty except for underscores. That will add an underline without affecting the text in any other way. If a different character style is already you must either add an underscore to this style definition (which will add an underline to all text formatted with this style) or make a copy of the style and add the underline, and then apply the new style.
-
How to take a picture and make a higher resolution vector?
I'm trying to take our company (jpg or png) logo and make a higher resolution vector file. I don't know much about the file that I have for the logo, others that it is several years old and is very pixelated. I asked someone in my business of making a "more high resolution vector file" because it requires our printer for shirts or letterhead or something.
I have little knowledge of the Illustrator... I can create projects from scratch by adding text, forms, etc.; and I learned about vectorizing images several years back when I took a base class of graphic design, but I forgot how to do a good part of it.
Help please, I beg you, let me know if you need more information about me! I just need the basics of how to select & refine my selection, then create it in a vector!
Thank you!
Here is a video showing how I would go to this topic. I accelerated as a result; normally I would have been more careful and lining everything up to the original.
-
How to remove unwanted picture and Fax Viewer images?
There are a lot of unwanted in the Picture and Fax Viewer images, but I can't find a way to remove them.
I suspect the unwanted images are at your
The temporary Internet files folder. When you access
sites on the net that include graphics and images,
they are loaded into this folder, so you can view them.If you want to view the contents of your
The temporary Internet files folder... try the following steps...Reach... Start / Control Panel / Internet Options /.
General tab / historical section of navigation / settings
button / see the files button.Or... a window IE and go to... Tools / Internet
Options / General tab / navigation history section.
Button settings / see the files button...You can also go to... Start / run... and type or copy.
Paste the following command:%USERPROFILE%\Local Settings\Temporary Internet Files
Then press on... Enter... to launch the Temporary Internet Files folder.
To clear it up... try deleting temporary Internet files.
Running Disk Cleanup should take care of it.
(310312) description of the disk cleanup
Tool in Windows XP
http://support.Microsoft.com/?kbid=310312You may also, on an Internet Explorer window...
Reach... Tools / Internet Options / delete files / OK.Do it again and check "delete all Offline Content" / OK.
Remove the Cookies button / OK.
More info...
Delete temporary Internet files
http://MVPs.org/winhelp2002/delcache.htm -
I just installed PS 13 items on my system Windows 7 Pro 64-bit. Mouse clicking works, but how I have difficulty drag and drop works do not? For example, I can't create a selection rectangle or drag the sliders or move the panels of the tool or resize a text box, I tried as an administrator (it does not help). Same "ClickLock" in Windows does not drag. No other program on my machine has problems. Help!
Reset preferences did not set anything. Even reinstall 13 elements PS has not fixed anything.
However, late breaking new...
See other discussions on this topic, which suggests a conflict of startup program that might be the cause, I did some experiments.
All the functions of the mouse to 13 PS elements worked well if I started my Windows 7 in "safe" mode
So, back in 'normal' mode, I manually disabled all startup programs. Returned mouse problem.
Enter the control panel "services", I disabled 'Synergy' (a program that allows me to share my keyboard and mouse between two computers). Fixed a problem.
The reactivation of all the startup programs while leaving a synergy service is turned off, everything works still fine.
Start all programs present and re-empowerment synergy, but turned off its 'high privilege check box. Everything is still fine.Conclusion: Synergy in high privilege mode service was the only culprit.
Synergy in non high mode allows my PS 13 items and keyboard/mouse sharing to coexist.The strange thing is that only PS elements 13 was affected by synergy. I detect no problems anywhere else. But it doesn't matter; the new arrangement (no high synergy) works fine for everything.
Al
-
I worked on the animation of a scene in flash for a few weeks and recently I met a problem with the import of my images to the stage where images I have import increase, however, the keyframe I tried to import the image to watch that it is occupied by an image and each image before the image key that just imported a picture that doesn't show shows up as a red square that fills the perimeters original of the image , there is no solution to this problem all where on the forum and the personal adobe technical support does not help me find a solution to this problem, what can I do to get Flash working normally again and fix this?
After the first time that I publish a preview after I start using the flash, flash makes the publication and the test scene features as useless and claims he has not found an HTML template, or if the images if I import all the images on the stage who empties and display each image before the image as a red square and then try to publish a flash preview renders also the publication and the scene features test as useless and claims he has found none of HTML template. What can I do to fix this? There is no solution on the web anywhere to this problem either.
I discovered the problem, I just need to get a Z820 with a Nvidia Quadro K6000 graphics card and a new Flash Professional subscription, I'm lucky, I did what I did. Thank you!
-
How to convert a black and white tif image to color
I want to convert a black and white tif image to color. I opened it in Photoshop, change the color RGB/8 mode, saved as a psd, but when I use the dialog box to change color, I just get my color showing in grayscale. What is the correct way to proceed?
Thank you
.
Create a solid color with mode "Lighter color" fill layer on top of the B & W image fusion.
-
How to multiply 2 strings and make them part of it
Hello, I have a problem. I need to multiply two signals and then make an integral of it. "Because my signals coming out of the cluster, they are strings, so after having multiplied I can't wire it" block "integral. Can someone help me how to convert and wire properly? You can see what I'm talking to the screenshot.
They are SOME of the channels.
LV simply uses a color very similar to clusters and the strings, bnut the shape of the wire is different.
In addition, the multiplication does not with strings at all.
And it works with clustes if
- both groups have only numeric values (or in your case tables of numbers)
- and the quantity of the components of the cluster is the same
That your code is that the two paintings in the two groups are multiplying... that multiplies each value in each table.
As an integral function doesn't accept that a single Bay, there is a data type mismatch.
What you have to do is to calculate the integral for each table, so it may be better to multiply the berries explicitly instead of using the cluster...
Norbert
-
On my screen shortcut keys don't contain their individual icon pictures, until I have sign, back in market, or Clear My Temporary Files, etc. Then they all go to the Firefox default image. I also noticed that when I navigate using firefox, immediate shows NO icons next to some of the web addresses Web site, Instead showing a drop-message that the website offers no identity Info, which I know is wrong!
This has only been happening for a week or So.
Please, please, please help me!
Thanks in advance for your kindness and help. I am a Novice at this stuff!
See you soon!
;-)Hello
I imagine the inconvenience that you are experiencing. I'll certainly try and help you fix the issue; However, I will need to ask you a few questions.
1. what version of IE are you using?
2 do you have of them pack installed?
3. do you have an antivirus installed on the computer?
4. do you also deal with any show related to problems with the computer?
5. are you aware of any changes made to the computer before the show?
First of all, you can run a full scan using the Microsoft Safety Scanner.
Note: there is a risk of data loss if all the files are infected and which can be removed in the cleaning process.
You can then try to launch the FIXIT of the article and see if it helps. Also go through the steps in this article as well and check it out.
If you try the manual steps, do not forget to back up the registry.
Registry warning
To do: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
http://support.Microsoft.com/kb/322756/
Hope this has been helpful and let us know if you need more assistance. We will be happy to help you.
-
I have windows vista using 32 bit how I up date and rotate faster is it running at 2.1? my desktop and laptop are running on the same why so my office so slow?
Hello
are you referring to the windows experience index?
If so this number is determined by the material that uses your computer
Make sure you have the latest vista drivers for your computer which you can get your computer manufacturers Web site
go to their website and look for a driver and software download section
Enter your model number for the last look drivers vista then download and install
If that improves not there you need to upgrade the hardware: map graphic or RAM
the total number is determined by the lowest number of material
http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-the-Windows-experience-index
Maybe you are looking for
-
Problem Windows/Bootcamp Partition with unsupported Mac (iMac 21.5 "mid-2011)
I tried many door routes stealth to install Windows 10 on my iMac (21.5 inch, mid-2011; 1 TB SATA disk), which seems to be not taken in charge by Apple. Whenever I try to use Bootcamp to try to establish a partition, in the end it cuts and force rest
-
Opening without recognizing camera
When I connect my camera to the Mac through a USB cable, opening used to open automatically and recognize the images on the camera, she stopped now, and when I opened opening it still does not recognize the existence of the camera, it is impossible t
-
I have a t61 with card reader. When I put in the sd card it want to format even when the sd card is formatted. When I press Yes to format the sd card it may not fit. I try to install an update driver always the same. Help, please. My lenovo is t61 64
-
How to install the windows media player 11 on windows xp?
I am trying to upgrade my system. Exploerer Windows is up to date and now I'm trying to upgrade windows media player to windows media player 11. When installing it a message pops up saying the following. Setup cannot continue. Unsupported operating s
-
Remote access via the internet between Windows 7 PCs and a Windows 7 Pro and a Windows PC Vista Home
I am running Windows 7 Professional on a laptop Dell Studio 1569 (64-bit). I want remote access to one Dell Inspiron, Windows 7 family, but also an another Dell Inspiron running Windows Vista Home edition, via an IP connection over the internet. I ca