How to copy tftp on remote site VPN

Similar Questions

• Access to the remote site VPN

  Hello

  I'm trying to solve a problem with the VPN, and I hope that someone could give me a helping hand.

  We have 3 offices, each with an ASA 5505 like the router/firewall, connected to a cable modem

  (NC Office) <----IPSEC----->(office of PA) <----IPSEC----->(TC Office)

  Internally, we have a full mesh VPN, so all offices can talk to each other directly.

  I have people at home, by using remote access VPN into the Office of PA, and I need them to be able to connect to two other offices there.

  I was able to run for the Office of CT, but I can't seem to work for the Office of the NC.  (I want to say is, users can remote access VPN in the PA Office and access resources in the offices of the PA and CT, but they can't get the Office of NC).

  Someone could take a look at these 2 configs and let me know if I'm missing something?  I am newer to this, so some of these configs do not have better naming conventions, but I'm getting there

  PA OFFICE

  Output of the command: "show run".

  : Saved
  :
  ASA Version 8.2 (5)
  !
  hostname WayneASA

  names of
  !
  interface Ethernet0/0
  switchport access vlan 2
  !
  interface Ethernet0/1
  !
  interface Ethernet0/2
  !
  interface Ethernet0/3
  !
  interface Ethernet0/4
  !
  interface Ethernet0/5
  !
  interface Ethernet0/6
  !
  interface Ethernet0/7
  !
  interface Vlan1
  nameif inside
  security-level 100
  IP 192.168.1.1 255.255.255.0
  !
  interface Vlan2
  nameif outside
  security-level 0
  IP 70.91.18.205 255.255.255.252
  !
  passive FTP mode
  clock timezone IS - 5
  clock to summer time EDT recurring
  DNS lookup field inside
  DNS domain-lookup outside
  DNS server-group DefaultDNS
  75.75.75.75 server name
  75.75.76.76 server name
  domain 3gtms.com
  permit same-security-traffic intra-interface
  object-group Protocol TCPUDP
  object-protocol udp
  object-tcp protocol
  inside_access_in of access allowed any ip an extended list
  IPSec_Access to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.2.0 255.255.255.0
  IPSec_Access to access extended list ip 192.168.10.0 allow 255.255.255.224 192.168.2.0 255.255.255.0
  IPSec_Access to access extended list ip 192.168.10.0 allow 255.255.255.224 192.168.5.0 255.255.255.0
  inside_nat0 to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.10.0 255.255.255.224
  inside_nat0 to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.2.0 255.255.255.0
  inside_nat0 to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.5.0 255.255.255.0
  TunnelSplit1 list standard access allowed 192.168.10.0 255.255.255.224
  TunnelSplit1 list standard access allowed 192.168.1.0 255.255.255.0
  outside_1_cryptomap to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.2.0 255.255.255.0
  outside_2_cryptomap to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.5.0 255.255.255.0
  outside_cryptomap to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.5.0 255.255.255.0
  RemoteTunnel_splitTunnelAcl list standard access allowed 192.168.1.0 255.255.255.0
  RemoteTunnel_splitTunnelAcl_1 list standard access allowed 192.168.1.0 255.255.255.0
  RemoteTunnel_splitTunnelAcl_1 list standard access allowed 192.168.2.0 255.255.255.0
  RemoteTunnel_splitTunnelAcl_1 list standard access allowed 192.168.5.0 255.255.255.0
  out_access_in list extended access udp allowed any SIP host 70.91.18.205 EQ
  out_access_in list extended access permit tcp any host 70.91.18.205 eq 5000
  out_access_in list extended access permits any udp host 70.91.18.205 range 9000-9049
  out_access_in list extended access permit tcp any host 70.91.18.205 EQ SIP
  out_access_in list extended access allowed object-group TCPUDP any host 70.91.18.205 eq 5090
  out_access_in list extended access permit udp any host 70.91.18.205 eq 5000
  Note to outside-nat0 access-list NAT0 for VPNPool to Remote Sites
  outside-nat0 extended ip 192.168.10.0 access list allow 255.255.255.224 192.168.2.0 255.255.255.0
  outside-nat0 extended ip 192.168.10.0 access list allow 255.255.255.224 192.168.5.0 255.255.255.0
  pager lines 24
  asdm of logging of information
  Within 1500 MTU
  Outside 1500 MTU
  IP mask 255.255.255.224 local pool VPNPool 192.168.10.1 - 192.168.10.30
  no failover
  ICMP unreachable rate-limit 1 burst-size 1
  don't allow no asdm history
  ARP timeout 14400
  Global 1 interface (outside)
  NAT (inside) 0-list of access inside_nat0
  NAT (inside) 1 0.0.0.0 0.0.0.0
  NAT (outside) 0-list of access outside-nat0
  inside_access_in access to the interface inside group
  Access-group out_access_in in interface outside
  Route outside 0.0.0.0 0.0.0.0 70.91.18.206 1
  Timeout xlate 03:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  Floating conn timeout 0:00:00
  dynamic-access-policy-registration DfltAccessPolicy
  the ssh LOCAL console AAA authentication
  Enable http server
  http 0.0.0.0 0.0.0.0 inside
  No snmp server location
  No snmp Server contact
  Server enable SNMP traps snmp authentication linkup, linkdown cold start
  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
  Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
  Crypto ipsec transform-set esp-3des esp-md5-hmac VPNTransformSet
  life crypto ipsec security association seconds 28800
  Crypto ipsec kilobytes of life - safety 4608000 association
  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
  Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
  card crypto IPSec_map 1 corresponds to the address IPSec_Access
  card crypto IPSec_map 1 set peer 50.199.234.229
  card crypto IPSec_map 1 the transform-set VPNTransformSet value
  card crypto IPSec_map 2 corresponds to the address outside_2_cryptomap
  card crypto IPSec_map 2 set pfs Group1
  card crypto IPSec_map 2 set peer 98.101.139.210
  card crypto IPSec_map 2 the transform-set VPNTransformSet value
  card crypto IPSec_map 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
  IPSec_map interface card crypto outside
  card crypto outside_map 1 match address outside_1_cryptomap
  peer set card crypto outside_map 1 50.199.234.229
  crypto ISAKMP allow outside
  crypto ISAKMP policy 1
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 43200
  Telnet 192.168.1.0 255.255.255.0 inside
  Telnet timeout 5
  SSH 0.0.0.0 0.0.0.0 inside
  SSH timeout 60
  Console timeout 0
  management-access inside
  dhcpd outside auto_config
  !
  dhcpd address 192.168.1.100 - 192.168.1.199 inside
  dhcpd dns 75.75.75.75 75.75.76.76 interface inside
  dhcpd allow inside
  !

  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  WebVPN
  internal RemoteTunnel group strategy
  attributes of Group Policy RemoteTunnel
  value of server DNS 75.75.75.75 75.75.76.76
  Protocol-tunnel-VPN IPSec
  Split-tunnel-policy tunnelspecified
  value of Split-tunnel-network-list RemoteTunnel_splitTunnelAcl_1
  dfavier vUA99P1dT3fvnDZy encrypted password username
  username dfavier attributes
  type of remote access service
  rduske vu0Zdx0n3oZWFSaX encrypted password username
  username rduske attributes
  type of remote access service
  eric 0vcSd5J/TLsFy7nU password user name encrypted privilege 15
  lestofts URsSXKLozQMSeCBk username encrypted password
  username lestofts attributes
  type of remote access service
  jpwiggins 3WyoRxmI6LZjGHZE encrypted password username
  username jpwiggins attributes
  type of remote access service
  tomleonard cQXk0RJCBtxyzZ4K encrypted password username
  username tomleonard attributes
  type of remote access service
  algobel 4AjIefFXCbu7.T9v encrypted password username
  username algobel attributes
  type of remote access service
  type tunnel-group RemoteTunnel remote access
  attributes global-tunnel-group RemoteTunnel
  address pool VPNPool
  Group Policy - by default-RemoteTunnel
  IPSec-attributes tunnel-group RemoteTunnel
  pre-shared key *.
  tunnel-group 50.199.234.229 type ipsec-l2l
  IPSec-attributes tunnel-group 50.199.234.229
  pre-shared key *.
  tunnel-group 98.101.139.210 type ipsec-l2l
  IPSec-attributes tunnel-group 98.101.139.210
  pre-shared key *.
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  maximum message length automatic of customer
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the preset_dns_map dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  inspect the rsh
  inspect the rtsp
  inspect esmtp
  inspect sqlnet
  inspect the skinny
  inspect sunrpc
  inspect xdmcp
  inspect the sip
  inspect the netbios
  inspect the tftp
  Review the ip options
  inspect the icmp
  inspect the pptp
  !
  global service-policy global_policy
  context of prompt hostname
  no remote anonymous reporting call
  Cryptochecksum:6d1ffe8d570d467e1ea6fd60e9457ba1
  : end

  CT OFFICE

  Output of the command: "show run".

  : Saved
  :
  ASA Version 8.2 (5)
  !
  hostname RaleighASA
  activate the encrypted password of Ml95GJgphVRqpdJ7
  2KFQnbNIdI.2KYOU encrypted passwd
  names of
  !
  interface Ethernet0/0
  switchport access vlan 2
  !
  interface Ethernet0/1
  !
  interface Ethernet0/2
  !
  interface Ethernet0/3
  !
  interface Ethernet0/4
  !
  interface Ethernet0/5
  !
  interface Ethernet0/6
  !
  interface Ethernet0/7
  !
  interface Vlan1
  nameif inside
  security-level 100
  192.168.5.1 IP address 255.255.255.0
  !
  interface Vlan2
  nameif outside
  security-level 0
  IP 98.101.139.210 255.0.0.0
  !
  passive FTP mode
  clock timezone IS - 5
  clock to summer time EDT recurring
  DNS lookup field inside
  DNS server-group DefaultDNS
  Server name 24.25.5.60
  Server name 24.25.5.61
  permit same-security-traffic intra-interface
  object-group Protocol TCPUDP
  object-protocol udp
  object-tcp protocol
  Wayne_Access to access extended list ip 192.168.5.0 allow 255.255.255.0 192.168.1.0 255.255.255.0
  Wayne_Access to access extended list ip 192.168.5.0 allow 255.255.255.0 192.168.10.0 255.255.255.0
  Shelton_Access to access extended list ip 192.168.5.0 allow 255.255.255.0 192.168.2.0 255.255.255.0
  out_access_in list extended access permit tcp any host 98.101.139.210 eq www
  out_access_in list extended access permit tcp any host 98.101.139.210 eq ftp
  out_access_in list extended access permit udp any host 98.101.139.210 eq tftp
  out_access_in list extended access udp allowed any SIP host 98.101.139.210 EQ
  out_access_in list extended access permit tcp any host 98.101.139.210 eq 5090
  out_access_in list extended access permit tcp any host 98.101.139.210 eq 2001
  out_access_in list extended access permit tcp any host 98.101.139.210 eq 5080
  out_access_in list extended access permit tcp any host 98.101.139.210 eq ssh
  out_access_in list extended access permit tcp any host 98.101.139.210 eq 81
  out_access_in list extended access permit tcp any host 98.101.139.210 eq 56774
  out_access_in list extended access permit tcp any host 98.101.139.210 eq 5000
  out_access_in list extended access permit tcp any host 98.101.139.210 eq 902
  out_access_in list extended access permit tcp any host 98.101.139.210 eq netbios-ssn
  out_access_in list extended access permit tcp any host 98.101.139.210 eq 445
  out_access_in list extended access permit tcp any host 98.101.139.210 eq https
  out_access_in list extended access allowed object-group TCPUDP any host 98.101.139.210 eq 3389
  out_access_in list extended access allowed object-group TCPUDP range guest 98.101.139.210 5480 5487
  out_access_in list extended access permits any udp host 98.101.139.210 range 9000-9050
  inside_nat0 to access extended list ip 192.168.5.0 allow 255.255.255.0 192.168.1.0 255.255.255.0
  inside_nat0 to access extended list ip 192.168.5.0 allow 255.255.255.0 192.168.2.0 255.255.255.0
  inside_nat0 to access extended list ip 192.168.5.0 allow 255.255.255.0 192.168.10.0 255.255.255.0
  pager lines 24
  asdm of logging of information
  Within 1500 MTU
  Outside 1500 MTU
  ICMP unreachable rate-limit 1 burst-size 1
  don't allow no asdm history
  ARP timeout 14400
  Global 1 interface (outside)
  NAT (inside) 0-list of access inside_nat0
  NAT (inside) 1 0.0.0.0 0.0.0.0

  Access-group out_access_in in interface outside
  Route outside 0.0.0.0 0.0.0.0 98.101.139.209 1
  Timeout xlate 03:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  Floating conn timeout 0:00:00
  dynamic-access-policy-registration DfltAccessPolicy
  the ssh LOCAL console AAA authentication
  Enable http server
  http 0.0.0.0 0.0.0.0 inside
  No snmp server location
  No snmp Server contact
  Server enable SNMP traps snmp authentication linkup, linkdown cold start
  Crypto ipsec transform-set esp-3des esp-md5-hmac WayneTransform
  Crypto ipsec transform-set esp-3des esp-md5-hmac SheltonTransform
  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
  Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
  life crypto ipsec security association seconds 28800
  Crypto ipsec kilobytes of life - safety 4608000 association
  card crypto IPSec_map 1 corresponds to the address Wayne_Access
  card crypto IPSec_map 1 set pfs Group1
  card crypto IPSec_map 1 set peer 70.91.18.205
  card crypto IPSec_map 1 the transform-set WayneTransform value
  card crypto IPSec_map 2 corresponds to the address Shelton_Access
  card crypto IPSec_map 2 set pfs Group1
  card crypto IPSec_map 2 set peer 50.199.234.229
  card crypto IPSec_map 2 the transform-set SheltonTransform value
  IPSec_map interface card crypto outside
  crypto ISAKMP allow outside
  crypto ISAKMP policy 1
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 43200
  Telnet timeout 5
  SSH 0.0.0.0 0.0.0.0 inside
  SSH timeout 5
  Console timeout 0
  management-access inside
  dhcpd outside auto_config
  !
  dhcpd address 192.168.5.100 - 192.168.5.199 inside
  dhcpd dns 24.25.5.60 24.25.5.61 interface inside
  dhcpd allow inside
  !

  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  WebVPN
  eric 0vcSd5J/TLsFy7nU password user name encrypted privilege 15
  tunnel-group 50.199.234.229 type ipsec-l2l
  IPSec-attributes tunnel-group 50.199.234.229
  pre-shared key *.
  tunnel-group 70.91.18.205 type ipsec-l2l
  IPSec-attributes tunnel-group 70.91.18.205
  pre-shared key *.
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  maximum message length automatic of customer
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the preset_dns_map dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  inspect the rsh
  inspect the rtsp
  inspect esmtp
  inspect sqlnet
  inspect the skinny
  inspect sunrpc
  inspect xdmcp
  inspect the sip
  inspect the netbios
  inspect the tftp
  Review the ip options
  inspect the icmp
  !
  global service-policy global_policy
  context of prompt hostname
  no remote anonymous reporting call
  Cryptochecksum:3d770ba9647ffdc22b3637e1e5b9a955
  : end

  Hello

  I might have found the problem.

  To be honest, I'm a little tired and concentration is difficult, especially when access between multiple device configurations. So second pair of eyes is perhaps in order.

  At the moment it seems to me that this configuration is the problem on the SITE of PA

  IPSec_Access to access extended list ip 192.168.10.0 allow 255.255.255.224 192.168.5.0 255.255.255.0

  This is an ACL that defines networks the and remote for a connection VPN L2L.

  Now, when we look at what connection VPN L2L this belong we see the following

  card crypto IPSec_map 1 corresponds to the address IPSec_Access

  card crypto IPSec_map 1 set peer 50.199.234.229

  card crypto IPSec_map 1 the transform-set VPNTransformSet value

  Now, we see that the peer IP address is 50.199.234.229. Is what site this? The IP address of the CT Site that works correctly?

  Now what that said the ACL line I mentioned more early basically is that when the 192.168.10.0 network 255.255.255.224 wants to connect to the network 192.168.5.0/24 should be sent to the CT Site. And of course, this should not be the case as we want traffic to go on the NC Site

  Also worth noting is that on the SITE of the above connection is configured with the '1' priority so it gets first compared a connection. If the VPN L2L configurations were in different order then the VPN Client connection can actually work. But it's just something that I wanted to point out. The actual resolution of the problem, of course, is to detach the configuration which is the cause of the real problem in which ASA attempts to route traffic to a completely wrong place.

  So can you remove this line ACL of the ASA of PA

  No IPSec_Access access list extended ip 192.168.10.0 allow 255.255.255.224 192.168.5.0 255.255.255.0

  Then, test the VPN Client connection NC SITE again.

  Hope that this will finally be the solution

  -Jouni

• Cannot ping computers on the subnet remote site vpn while to set up

  Hi all

  I encountered a problem of site to site vpn for ping answered nothing of machines of remote subnet.

  the ipsec tunnel is ok but I can ping the ASA distance inside the interface ip

  Here is my scenario:

  LAN1 - ASA5510 - ASA5505 - LAN2 - ordinateur_distant

  LAN1: 192.168.x.0/24

  LAN2: 172.25.88.0/24

  remote_machine_ip: 172.25.87.30

  LAN1 can ping to ASA5505 inside interface (172.25.88.1)

  but cannot ping ordinateur_distant (172.25.87.30)

  Inside of the interface ASA5505 can ping ordinateur_distant

  LAN2 can ASA5510 ping inside the machines on LAN1 and interface

  Is there something I missed?

  Thanks much for the reply

  I don't think it's something you really want to do.

  If you PAT the whole subnet to LAN1 ip (192.168.1.0/24) to 172.25.249.1, then LAN2, will not be able to reach the specific host on LAN1, cause now, you represent the LAN1 network, with a single ip address.

  So traffic will become a way from LAN1 can reach LAN2 and get the response of LAN2 through the PAT on 172.25.249.1

  But LAN2, is no longer specific hosts LAN1 ip traffic, since you only have 172.25.249.1, to represent the subnet to LAN1.

  If you still want to PAT the whole subnet to LAN1 (192.168.1.0/24) ip to 172.25.249.1, then you have to do outside the NAT.

  http://www.Cisco.com/en/us/customer/docs/security/ASA/asa80/command/reference/no.html#wp1737858

  Kind regards

• V6.1 - navigation bar in model - how to copy to the new site

  With the help of V61. patched uptodate: in the past, I created a page template that had only the navigation bar. Later, I created a new site and wanted to just take the already built on the old site navigation bar and use it in the new. I have either:
  -copied the page of the model to the new site
  or
  -the navigation bar copied and pasted into a new page in the new site
  I remember is no longer. I then modified the various images/up/down/etc. to reflect the new site navigation bar needs.
  
  This worked very well, but now I need to change the bar. When I change this model, click on the navigation bar, select Edit, Navigation bar, it brings information on the navigation bar Original with all properties and the old button elements. Given that the two sites are on the same machine that I suspect it is somehow the link back to the old nav bar and I dare not play with it. I looked in the code section, but I don't see info here on what he thinks, what is the default for this navigation bar / model page and I can't find anything in the menus, help or KB on how to change what DW's default navigation bar.
  
  Clearly the way in which I copied it was bad and maybe at this point there is no way to recover. But I wonder if I can somehow copy or record the esscence my new navigation bar, remove the entire model and a new, and then paste in my navigation again without having somehow remember all it's illicit past.
  
  Any thoughts appreciated,
  Alan D.
  

  Heh, heh. Sorry, I recommend an NSAID and call me in the morning.

  The entire site was "an exercise for the student" and started through tutorials of DW which indicated that I really should be using templates and cascading style sheets. Needless to say, say it anyway, it wasn't a total success. Leaving all that behind and the thanks bye for the advice, I'll look into your suggestions, my problem is that I can't change this in DW's navigation bar. If I select and try to change, rather than the navigation bar that you see on the site of solar data, the basic dunwellguitar.com site navigation bar happens instead. I had hoped to find a way to migrate or change the problem without having to rebuild. Give what you have already said, it seems that it would be prudent spend time-time to rebuild properly.

  Thanks again for the suggestions and sorry for retinal damage.
  Alan D.

• How to copy the list of sites allowed in the handler access to another PC?

  I have set up a pc using Access Manager and do it properly, which allows that the sites I approved.  I would like to copy this list on other PC and I was wondering if there is a way to do it?

  Location of Access Manager:

  [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\Ratings

  Save - transport - run

  Source link: http://www.techsupportforum.com/forums/f10/export-content-advisor-settings-147444.html

• Cannot ping sub interface from my remote site VPN gateways

  I can't ping my gateways to interface my remote vpn connection sub

  I can ping 192.6.1.0 network, but can't ping network 192.6.2.0 or 192.6.3.0

  When I remote desktop in 192.6.1.20 I can ping all the networks, including gateways to interface sub.

  I think that something in my asa is misconfigured or not added

  ASA NAT rules:

  Exempt NAT Interface: inside

  Source 192.6.0.0/16

  Destination 192.6.10.96/27

  Static NAT interface: inside (it's for the local NAT of E0/0 out)

  Source 192.6.1.1/16

  Interface translated outside the Destination: 172.35.221.200

  Dynamic NAT interface: inside

  Source: no

  Destination: outside

  ASA access rules:

  Permit outside

  Source: no

  Destination: out

  Services: udp, tcp, tcp/http

  Static routes:

  Interface: Outside > network: all outdoors DSL (shows no DSL in the graph)

  

  Some incorrect configuration:

  On the ASA:

  (1) directions are incorrect, the default should point to the next hop route, that is to say: the internet router: 172.35.221.x, as follows:

  Route outside 0.0.0.0 0.0.0.0 172.35.221.x

  ---> where x must be the router internet ip address.

  existing routes need to be removed:

  No route outside 0.0.0.0 0.0.0.0 192.298.47.182 255

  No route outside 0.0.0.0 0.0.0.0 172.35.209.81 in tunnel

  (2) the following declaration of the static NAT is incorrect too and should be removed:

  static (inside, outside) USSLTA01_External USSLTA01 netmask 255.255.255.255

  --> You can not NAT interface on the SAA itself.

  (3) for the SAA within the interface's subnet mask should be 255.255.255.0, no 255.255.0.0. It should be the same as the router interface subnet mask:

  interface Ethernet0/1

  nameif inside

  security-level 100

  IP 192.6.1.254 255.255.255.0

  (4) on the way to access these sub interfaces subnet on the SAA as follows:

  Route inside 192.6.2.0 255.255.255.0 192.6.1.235

  Route inside 192.6.3.0 255.255.255.0 192.6.1.235

  Route inside 192.6.4.0 255.255.255.0 192.6.1.235

  On the router, configure it by default route as follows:

  IP route 0.0.0.0 0.0.0.0 192.6.1.254

• Do not do a ping ASA inside IP port of the remote site VPN L2L with her

  The established VPN L2L OK between ASA-1/ASA-2:

  ASA-2# see the crypto isakmp his

  KEv1 SAs:

  ITS enabled: 1

  Generate a new key SA: 0 (a tunnel report Active 1 and 1 to generate a new key during the generate a new key)

  Total SA IKE: 1

  1 peer IKE: 207.140.28.102

  Type: L2L role: answering machine

  Generate a new key: no State: MM_ACTIVE

  There are no SAs IKEv2

  QUESTION: 3750-2, we ping 3750-1 (10.10.2.253) are OK, but not ASA-1 inside port (10.10.2.254).

  Debug icmp ASA-1 data:

  ASA-1 debug icmp trace #.

  trace of icmp debug enabled at level 1

  Echo ICMP Internet request: 10.100.2.252 server: 10.10.2.253 ID = 400 seq = 0 len = 72

  ICMP echo response from the server: 10.10.2.253 Internet: 10.100.2.252 ID = 400 seq = 0 len = 72

  Echo ICMP Internet request: 10.100.2.252 server: 10.10.2.253 ID = 400 seq = 1 len = 72

  ICMP echo response from the server: 10.10.2.253 Internet: 10.100.2.252 ID = 400 seq = 1 len = 72

  Echo request ICMP 10.100.2.252 to 10.10.2.254 ID = 401 seq = 0 len = 72

  Echo request ICMP 10.100.2.252 to 10.10.2.254 ID = 401 seq = 1 len = 72

  Echo request ICMP 10.100.2.252 to 10.10.2.254 ID = 401 seq = 2 len = 72

  Make sure you have access to the administration # inside

  lt me know f This allows.

• Can also interface with VPN remote site also for another use?

  Hi all

  An interface used for the remote site VPN on PIX can be used for another function, for example for the smtp server and web publishing?

  Thank you!

  Best regards

  Teru Lei

  Yes! of course you can. Just try it.

  --

  Alexis Fidalgo

  Systems engineer

  AT & T Argentina

• ASA Site, Remote Site cannot access DMZ to the Hub site

  So I've been scratching my head and I just can't visualize what I what and how I want to do.

  Here is the overview of my network:

  Headquarters: ASA 5505

  Site1: ASA 5505

  Site2: ASA 5505

  Training3: ASA 5505

  All Sites are connected L2L to the location of the Headquarters with VPN Site to Site.

  Since the HQ site I can ping each location by satellite, and each satellite location I can ping the HQ site. I will also mention that all other traffic is also correctly.

  Here's my number: HQ site, I have a DMZ set up with a web/mail server. This mail/web server is accessible from my HQ LAN, but not from the satellite location. I need allow that.

  What should I do?

  My second question is that I want for satellite sites to see networks of eachother. I should create a VPN network between sites, or can this be solved in the same way that the question of the DMZ?

  I enclose the show run from my ASA HQ

  See the race HQ ASA

  For the mail/web server that requires access on the remote site VPN tunnels, you must add the servers to the acl crypto, similar to the way you have it for network access. Make sure that both parties have the ACL in mirror. If you're natting from the DMZ to the outside, make sure you create an exemption from nat from the dmz to the outside for VPN traffic.

  For the second question, because you have only three sites, I would recommend creating a tunnel from site to site between two satellite sites.

  HTH

  PS. If you found this post useful, please note it.

• Remote site will not show the local updates although CS5 says they are successful?

  Hi, local changes I save and put it in Dreamweaver are not displayed on my site online. My server connection works, Dreamweaver says they are successful, the changes appear when I preview them in Dreamweaver, I tried both update a single page and throughout the site, and I tried to transfer files manually using FileZilla. No idea how I can get my remote site to update?

  Using CS5, using SFTP (host site says to use SFTP), OS is Windows 7, using GoDaddy to get a custom url that redirects to a different host site.

  Are you sure you are uploading to the correct location?

  I've seen it happen where people accidentally put up their site in DW with an additional and unnecessary directory level. Uusually called htdocs, bands or public thought they need to duplicate the folder root of the web server. When they try to download in their folder root on the server the additional directory is copied on as well, so instead of finding your page to...

  www.yoursite.com/index.html

  He's going to...

  www.yoursite.com/public (or htdocs or webs) / index.html

  EDIT: The fact that DW and Filezilla are apparently download but page is in some sort not updating could also be a cache problem simple browser. Clear the cache of your browser and see if updates made.

• PIX 515E for VPN remote site

  Hello

  7.0 (1) version pix

  ASDM version 5.0 (1)

  I have a situation where you go paas-thanks to the VPN feature goes on our PIX 515E. I tried to put this on the pix using a VPN Wizard Site to site

  who is enabled. I was unable to connect to the pix from the remote site. Witch's journal replied negotiate the pix is OK and the success

  The problem is when I try to set up the tunnel to the top of the remote site. I fall without failure.

  where can I see the vpn pix for error log?

  is there a manual for the solution of site to site VPN using the wizard

  Help, please.

  Thanks in advance

  http://www.Cisco.com/en/us/partner/products/HW/vpndevc/ps2030/products_configuration_example09186a00804acfea.shtml#ASDM

  the section 'use adsm' (step 14) gives an example on how to set up vpn lan - lan via adsm

  Newspaper to go to the section "check".

• Remote access to the site to site VPN

  We currently have a VPN site-to-site set up on a direct line between our two data centers. Hosts on site one can speak to guests at site B, and talk to the hosts to site A to site B guests.

  I've recently implemented a site A. VPN VPN remote access clients can access all of the resources behind the ASA at A site without problem. However, strange things happen when they try to contact the site B.

  I have set up corresponding exemptions of NAT on each side of the connection. The remote site reported no abnormalities. When you attempt to connect to a remote VPN client to site B, the only errors that appear are on the SAA to site A. When a remote client attempts to connect to a host at site B, the following errors appear in the log:

  % ASA-3-305005: no group of translation not found for tcp src outside:10.3.0.1/60851 dst ds3:10.0.1.42/22

  I have the exemption following NAT set up on site A:

  access-list sheep; 3 items

  access-list 1 permit line sheep extended ip 10.1.0.0 255.255.0.0 10.0.0.0 255.255.0.0 (hitcnt = 0)

  allowed to Access-list sheep lengthened 2 ip line 10.1.0.0 255.255.0.0 10.3.0.0 255.255.255.0 (hitcnt = 0)

  allowed to Access-list sheep line 3 extended ip 10.3.0.0 255.255.255.0 10.0.0.0 255.255.0.0 (hitcnt = 0)

  I work on it for a few days now and hesitate to open a ticket of TAC. I've seen a few similar questions on the forums, but have found zero with a working solution. I tried to follow the technical notes on Cisco's Web site for a configuration similar to, but had no luck.

  Also, I enabled same-security-traffic on intra and inter-interface interface.

  Any help would be appreciated.

  HUB of the ASA, is this your topology? If so try below suggestions.

  Inside 10.1.1.0/16 Net

  Net 172.16.0.0/28 - net through Tunnel L2L 10.0.0.0/16 end DS3

  VPN RA Net 10.3.0.0/24

  To RA to access the L2L tunnel end hosting you will need to exempt sheep rule applied to the ds3 interface.

  based on the journal

  % ASA-3-305005: no group of translation not found for tcp src outside:10.3.0.1/60851 dst ds3:10.0.1.42/22

  Try this

  no scope list ip 10.3.0.0 access test allow 255.255.255.0 10.0.0.0 255.255.0.0

  test the ip 10.0.0.0 allowed extended access list 255.255.0.0 10.3.0.0 255.255.255.0

  test access list 0 Tan (ds3)

  on the end of the tunnel (spoke), to allow the network of RA from the FOCUS of the ASA in the interesting traffic.

  Let us know how it works

  Concerning

• You try to run a Site to site VPN and remote VPN from the same IP remotely

  We currently have a site to site VPN configuration between our offices call center and a 3rd party that allows them to access our training to their employees to use environment while being trained on our systems. This tunnel is running between our ASA and their ASA without problem; However, when we have managers come out to the call center, they are unable to use remote VPN to access our office.

  Apparently the same IP peer remote that we use for our site to the other tunnel is the same IP that our managers use to access the internet when they are on-site with the customer. When I look at the logs it shows the VPN attempt and then I get treatment Information Exchange has failed. So from what I can understand when our managers are trying to connect to our firewall from the same IP address as the counterpart of site to site it automatically tries to create a tunnel, according to the information of the site to the other tunnel. If our managers are anywhere else, they can connect through remote VPN with no problems.

  My question is if anyone knows of a way to make the firewall allow VPN site to site and remote connections with the same remote IP address.

  Hi John,.

  Basically, in older versions, when you hit a static encryption card and you does not match this static encryption completely map the connection continues until the dynamic encryption card. For this reason, you can connect your IPSec clients before. A bug has been opened on this vulnerability.

  CSCuc75090  Details of bug

  The crypto IPSec Security Association are created by dynamic crypto map to static peers

  Symptom:

  When a static VPN peer adds all traffic to the ACL crypto, a surveillance society is based even if the pair IP is not allowed in the acl to the main façade encryption. Are these SA finally put in correspondence and commissioning the dynamic crypto map instance.

  Conditions:

  It was a planned design since the first day that allowed customers to fall through in the case of static crypto map did not provide a necessary cryptographic services.

  The SA must be made from a peer configured statically and a dynamic crypto map instance must be configured on the receiving end.

  Workaround solution:

  N/A

  Some possible workarounds are:

  Configure a static nat device when you try to use the remote VPN if the firewall remotely will be hit with a different public IP address. It would be a good solution, but it will depend on how many ip addresses public you have available, if you really want one of these ip addresses for that access.

  Also, I thought you could use AnyConnect instead of the IPSec VPN client. I don't know how many users need to connect from your PC to the remote site, but the ASA has 2 licenses SSL available that you could use. Because Anyconnect uses the SSL protocol, it won't have a problem on your environment.

  Below some information:

  http://www.Cisco.com/c/en/us/TD/docs/security/ASA/asa84/configuration/guide/asa_84_cli_config/vpn_anyconnect.html

  Hope this helps,

  Luis.

• remote VPN and vpn site to site vpn remote users unable to access the local network

  As per below config remote vpn and vpn site to site vpn remote users unable to access the local network please suggest me a required config

  The local 192.168.215.4 not able ping server IP this server connectivity remote vpn works fine but not able to ping to the local network vpn users.

  ASA Version 8.2 (2)
  !
  host name
  domain kunchevrolet
  activate r8xwsBuKsSP7kABz encrypted password
  r8xwsBuKsSP7kABz encrypted passwd
  names of
  !
  interface Ethernet0/0
  nameif outside
  security-level 0
  PPPoE client vpdn group dataone
  IP address pppoe
  !
  interface Ethernet0/1
  nameif inside
  security-level 50
  IP 192.168.215.2 255.255.255.0
  !
  interface Ethernet0/2
  nameif Internet
  security-level 0
  IP address dhcp setroute
  !
  interface Ethernet0/3
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface Management0/0
  Shutdown
  No nameif
  no level of security
  no ip address
  management only
  !
  passive FTP mode
  clock timezone IST 5 30
  DNS server-group DefaultDNS
  domain kunchevrolet
  permit same-security-traffic intra-interface
  object-group network GM-DC-VPN-Gateway
  object-group, net-LAN
  access extensive list ip 192.168.215.0 sptnl allow 255.255.255.0 192.168.2.0 255.255.255.0
  192.168.215.0 IP Access-list extended sheep 255.255.255.0 allow 192.168.2.0 255.255.255.0
  tunnel of splitting allowed access list standard 192.168.215.0 255.255.255.0
  pager lines 24
  Enable logging
  asdm of logging of information
  Outside 1500 MTU
  Within 1500 MTU
  MTU 1500 Internet
  IP local pool VPN_Users 192.168.2.1 - 192.168.2.250 mask 255.255.255.0
  ICMP unreachable rate-limit 1 burst-size 1
  enable ASDM history
  ARP timeout 14400
  NAT-control
  Global 1 interface (outside)
  NAT (inside) 1 0.0.0.0 0.0.0.0
  Route outside 0.0.0.0 0.0.0.0 59.90.214.1 1
  Timeout xlate 03:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  dynamic-access-policy-registration DfltAccessPolicy
  the ssh LOCAL console AAA authentication
  AAA authentication LOCAL telnet console
  AAA authentication http LOCAL console
  AAA authentication enable LOCAL console
  LOCAL AAA authentication serial console
  Enable http server
  x.x.x.x 255.255.255.252 out http
  http 192.168.215.0 255.255.255.252 inside
  http 192.168.215.0 255.255.255.0 inside
  No snmp server location
  No snmp Server contact
  Server enable SNMP traps snmp authentication linkup, linkdown cold start
  Crypto ipsec transform-set esp-3des esp-sha-hmac RIGHT
  life crypto ipsec security association seconds 28800
  Crypto ipsec kilobytes of life - safety 4608000 association
  Crypto-map dynamic dynmap 65500 transform-set RIGHT
  card crypto 10 VPN ipsec-isakmp dynamic dynmap
  card crypto VPN outside interface
  card crypto 10 ASA-01 set peer 221.135.138.130
  card crypto 10 ASA - 01 the transform-set RIGHT value
  crypto ISAKMP allow outside
  crypto ISAKMP policy 10
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 86400
  crypto ISAKMP policy 65535
  preshared authentication
  the Encryption
  sha hash
  Group 2
  lifetime 28800
  Telnet 192.168.215.0 255.255.255.0 inside
  Telnet timeout 5
  SSH 0.0.0.0 0.0.0.0 outdoors
  SSH timeout 5
  Console timeout 0
  management-access inside
  VPDN group dataone request dialout pppoe
  VPDN group dataone localname bb4027654187_scdrid
  VPDN group dataone ppp authentication chap
  VPDN username bb4027654187_scdrid password * local store
  interface for identifying DHCP-client Internet customer
  dhcpd dns 218.248.255.141 218.248.245.1
  !
  dhcpd address 192.168.215.11 - 192.168.215.254 inside
  dhcpd allow inside
  !
  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  Des-sha1 encryption SSL
  WebVPN
  allow outside
  tunnel-group-list activate
  internal kun group policy
  kun group policy attributes
  VPN - connections 8
  Protocol-tunnel-VPN IPSec
  Split-tunnel-policy tunnelspecified
  Split-tunnel-network-list value split tunnel
  kunchevrolet value by default-field
  test P4ttSyrm33SV8TYp encrypted password username
  username kunauto password bSHrKTGl8PUbvus / encrypted privilege 15
  username kunauto attributes
  Strategy Group-VPN-kun
  Protocol-tunnel-VPN IPSec
  tunnel-group vpngroup type remote access
  tunnel-group vpngroup General attributes
  address pool VPN_Users
  Group Policy - by default-kun
  tunnel-group vpngroup webvpn-attributes
  the vpngroup group alias activation
  vpngroup group tunnel ipsec-attributes
  pre-shared key *.
  type tunnel-group test remote access
  tunnel-group x.x.x.x type ipsec-l2l
  tunnel-group ipsec-attributes x.x.x.x
  pre-shared key *.
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  maximum message length automatic of customer
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the preset_dns_map dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  Review the ip options
  inspect the netbios
  inspect the rsh
  inspect the rtsp
  inspect the skinny
  inspect esmtp
  inspect sqlnet
  inspect sunrpc
  inspect the tftp
  inspect the sip
  inspect xdmcp
  inspect the icmp
  !
  global service-policy global_policy
  context of prompt hostname
  call-home
  Profile of CiscoTAC-1
  no active account
  http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
  email address of destination [email protected] / * /
  destination-mode http transport
  Subscribe to alert-group diagnosis
  Subscribe to alert-group environment
  Subscribe to alert-group monthly periodic inventory
  monthly periodicals to subscribe to alert-group configuration
  daily periodic subscribe to alert-group telemetry
  Cryptochecksum:0d2497e1280e41ab3875e77c6b184cf8
  : end
  kunauto #.

  Hello

  Looking at the configuration, there is an access list this nat exemption: -.

  192.168.215.0 IP Access-list extended sheep 255.255.255.0 allow 192.168.2.0 255.255.255.0

  But it is not applied in the States of nat.

  Send the following command to the nat exemption to apply: -.

  NAT (inside) 0 access-list sheep

  Kind regards

  Dinesh Moudgil

  P.S. Please mark this message as 'Responded' If you find this information useful so that it brings goodness to other users of the community

• 2 VPN remote sites can communicate by tunnel via a mutual 3' rd PIX?

  Hello

  I have a client who has a PIX 515E in the P.C. of the company and s 2 PIX 501 at remote sites. As of today the distance 2 PIX have a VPN connection from site to site with the HQ PIX.

  My question is... is - it possible to have the HQ PIX act as a virtual private network 'hub' for remote to communicate across sites? I mean, it is, is it possible to configure the PIX so that traffic to the site remote B can go into the tunnel at HQ, and then through the tunnel to the remote B site?

  If this is possible, how? The HQ PIX would have enough information to route packets in the proper way? What should I do?

  Thank you in advance to those who will answer. :-)

  If the question is not too clear, please post here and tell me...

  Steffen

  Steffen,

  Unfortunately, the answer to that is no the PIX not "redirect" return packages the same interface, where they were received. This is normal and is part of the security on the PIX algorithm. The VPN 3000 and IOS will do this, but not the PIX.

  However, as a workaround, can not only create another tunnel on the 2 rays to another? In other words, Setup a 'triangle' of sorts. That's usually what we suggest in situations like this.

  I hope this helps.

  Scott