How to copy VI and create new paths Subvi

Similar Questions

• How to manage data and create new textInput fields during the destruction/creation of new views?

  Basically, I need to know how to create another textInput field when I pass data from one view to the other, while recording the data that has been adopted in a first time.

  I want the user to be able to enter text into a textInput on the first view field and see on the next view, BUT I want the following view to record what the user has entered, return to the first view, then take another entry from the user and create another field textInput on the second point of view. It's like a memo pad app. The user enters a task on the first view, then he or she is able to see it on the second point of view. Then, the user must be able to navigate back to the first view and create another task which also goes to the second point of view, but does not replace the first task that was entered. My problem is to create new textInput fields as new data comes in for the second point of view. Any ideas? Perhaps textInput fields are not visual components I should use...
  

  http://d-solve.com/flexas3-global-variables-and-the-singleton/

• Problem to shrink my local C drive and create new partitions on this subject.

  I am shrinking my local disk C (current boot volume) and create new partitions on this subject. But I get a warning message that if I do, I won't be able to boot from any excepet volume the current boot Volume.

  In case if I need to recovery my laptop what will happen. This means that I can't do my hard drive recovery?

  Kaj_R wrote:

  I am shrinking my local disk C (current boot volume) and create new partitions on this subject. But I get a warning message that if I do, I won't be able to boot from any excepet volume the current boot Volume.

  In case if I need to recovery my laptop what will happen. This means that I can't do my hard drive recovery?

  Hello Kaj_R.

  If you change the volume, it is likely that the recovery partition will not work.  I suggest that you create a set of recovery media before playing with partitions.

  This document can help you create the recovery media.

  Have a great day!

• How can I make the popup with empty fields and create new record?

  I would use a popup create new record.
  I created an af:popup drag and drop a data control VO in jsff. Then, I created a button and place an af:showPopupBehavior. I was able to pop-up window by clicking on the button.
  However, the window filled with information from the record 1. and when I select a record in the table and click on the popup, the popup is filled with this record.
  How can I make the popup with empty fields and create a new record by recording the popup?
  Thank you

  Hello

  You must call the CreateInsert for the underlying ViewObject operation when opening the popup because it does not allow to clear the input field, you must have a new record created

  Frank

• How to copy user presets to new computer? [was: Hi people.]

  I know that this is possible, but I forgot how do...

  In any case, at this point.

  I have a new computer and I need to transfer all my programs, etc.

  I have a number of "User Presets" I created, and I want to copy them to the new installation of the computer.

  Can someone help me please.

  Thanks in advance.

  Glen Gibbs

  See this link for more information:

  http://www.lightroomqueen.com/how-move-Lightroom-to-new-computer/

• How to copy a scroller created to CS6 in CC?

  Hi all experts out there.

  I created a scroller title in Premiere Pro CS6.

  But I bought first Pro CC and build a sequence in the timeline panel. Now, I wanted to use the wheel of title I created previously in CS6. I tried the copy and the last method and it doesn't work. After you have copied in CS6, I went back to CC to try to stick, but I can not paste because paste option is grayed out.

  So, advice on how to copy the title scroll created in CS6 in CC? I certainly wouldn't have to go through their creation from scratch in the new CC.

  Thank you

  Assuming that this is a title created by first then

  Select it in the project Panel

  File > export > title

  Save it somewhere

  Then just do a standard import in your CC project.

  The title should import and editable in your new project

• Satellite L500-19 - remove the recovery partition and create new

  Hello!

  I bought a new Toshiba Satellite L500-19th with Windows 7 Home Premium (64-bit). So far, everything is brilliant work.
  I have already created the recovery DVDs.
  As a result, could now delete the partition with the recovery program? I want to use the full space of my hard disk and create partitions as I want.
  But I don't know how I should do this?
  Could you please help me?

  Oxford

  If you are sure that the created recovery DVD is ok at 100%, you can delete all data on the second partition.
  Open Windows Explorer on the left side where is the second partition, click with the right button of the mouse and choose the FORMAT option.
  Choose the quick format option and click START.

  After a minute or two, all data will be gone.

  Please note: in the future when you want to use recovery DVD for installing Win7 the whole HARD disk is deleted and you will lose all your data.
  Using recovery DVD you can not format the C partition only.

• In how many ways, we can create new document and how implements this ways?

  I found that we can create a new document in 3 ways

  (1) using an application session object, the document list as follows

  InterfacePtr < IApplication > firstdoc (GetExecutionContextSession ()-> QueryApplication());

  InterfacePtr < IDocumentList > docList (firstdoc-> QueryDocumentList());

  docList-> NewDoc (25089, IDataBase::ProtectionLevel.kProtectSave, nil);

  but in this case I do not get how to use newdoc method it is to say what parameter we pass (not yet clear the name of API reference)

  (2) using the command

  InterfacePtr < IApplication > firstdoc (GetExecutionContextSession ()-> QueryApplication());

  InterfacePtr < IDocumentList > docList (firstdoc-> QueryDocumentList());

  InterfacePtr < ICommand > new1(CmdUtils::CreateCommand(kNewDocCmdBoss));)

  UIDList asd (docList);

  New1-> SetItemList (asd);

  CmdUtils::ProcessCommand (new1);

  (3) bu using an interface util or façade

  Utils < IDocumentCommands > ()-> new (...)

  in this case also, I am not geeting how to use the new method

  I have try all this method but none of them work .i knew I made a mistake in all these method please correct me where I'm wrong.

  Main problem is in the first parameter of method newdoc IE what is class id, how to use

  1. Add to your project "SDKLayoutHelper.cpp", "SDKLayoutHelper.h".

  2. #include "SDKLayoutHelper.h".

  Insert the code:

  {}

  SDKLayoutHelper helper;

  UIDRef docRef is helper. CreateDocument();

  If (UIDRef::gNull is docRef)

  break;

  Helper. OpenLayoutWindow (docRef);

  } while (kFalse);

  Kind regards!

• How to name a region created by paths that intersect

  If I take a circle and divide it into quarters by adding horizontal and vertical lines that cross each other, how can I name these 4 areas that result so that one person can change the color of these four tasks programmatically when you export as a svg file?  (no problem shading them in Illustrator using live paint - but I need to stick a label or name on each region for use outside of the program)

  Thanks for any help.

  Rennes,

  If you have a (set) circle and a vertical line and a horizontal (two lines extending at least to circles), select the first line vertical and object > path > divide objects below, then do the same with the horizontal line (or in reverse). Divide objects below only work with one path at a time.

• How to copy pictures to a new directory?

  Is it possible to copy a bunch of images in a new directory in LR?  I tried the trail of usual click the right button and now Ctrl-down while dragging, but none of those who work.

  Ideally, I would like to make virtual copies in a new directory, but if this is not possible, is there a way to copy a whole bunch of LR images in a new directory?

  Please do not suggest using virtual done deal in the same directory that I am already aware of this and I would like to find an answer that is easier on the management of my image to that.  I want to significantly different changes to a bunch of images and I don't want these images in the same directory as the original for reasons of image management.

  Lightroom does not have copies of the way you are trying to use. Therefore, the simpler you do what your request is to make the copies outside of Lightroom, give them a new name and then import them.

• I can't access and create new e-mail messages.

  Once more I can't access the mails in my mailbox.  Nor can I write new e-mail messages or do any other function.  The only thing I see is that comes from the e-mail and the title of it.  I had this problem about 2 weeks ago and when I contacted you it was settled.  Yes, I have expanded my computer.  My email address is * address email is removed from the privacy *.  Is that going to be an ongoing problem?

  Hello MarleneBohanan,

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

• How do I Steam and all new games to go on my D drive?

  I just got my Alienware Area 51 and I noticed that he has steam installed on the C drive, which is the 128 GB SSD.  Before I start to connect to Steam and download my games, I want to make sure they want the 2 TB drive D as fill quickly the C drive.

  Should I remove the pre-installation and just download and reinstall on drive D, or is there another way to make sure the huge game files go to the D drive?  Thank you!

  YES install it wherever you want.

• How to remove text and write new text

  in my PDF file I need to edit written texts on it with other words.

  How can I do?

  It is not recommended to do so, but if you use the text tool change & Images (in Acrobat, under Tools - editing content).

• How to copy a directory with all permissions and intact junctions?

  Is it possible to copy a directory with junctions in there and have it copy as junctions, not the contents of the junction?

  I'll try to make a long story short, but I just spent a few hours cleaning after robocopy and junctions hidden Windows 7.  I have Windows 7 installed on a spare HD so I can play with it, adjust, test things and figure out how I want to set up before taking the plunge and the replacement of XP full time.

  Just as an experiment, I wanted to create a new user account, but put its directory of the user on another drive and use a symbolic link to point to her to C:\Users.  I created a new user account called Test, connected so that its directory was created and then disconnected.

  I discovered that the moving or copying the files, either in Explorer or a command prompt does not move or copy the directory junctions.  I then tried Robocopy because it contains options to copy all security, owner, and audit information.  There is also an option "copy symbolic links from the target."

  The exact command, I used was:
  Robocopy C:\Users\Test/e/COPYALL /R:0 /SL D:\Users

  First of all, there will be no even to copy permissions, the few records he did copy inherited permissions from the parent directory to the destination, and he added a strange permission that I'll get to in a minute.  It was not long until he stopped with the error.  I don't remember the error because I restarted several times since then, and I don't care to try again just to get the exact error message in order to post here.

  What's happened, it's that there is a directory hidden in C:\Users\Test\AppData\Local junction.  Junctioin name is "Application Data" and it links to C:\Users\Test\AppData\Local (the same directory that is).  This caused his keep copy the folder "Application Data" on itself until the max file name length has been exceded and he stopped.

  When I tried to delete the directory, I kept getting an error that it could not delete the directory because it was not empty.  I had total control over the directory, but I still have the error and the directory (from what I could see) was empty.

  Here's the strange authorization occurs.  For some reason, copies of the "Application Data" directory were defined on system / hidden and everyone had group ' the folder list / reading data "permission set to deny, that's why I couldn't see, even in the administrator command prompt.

  Once I got the permissions sorted, I could not delete the directory because the name was too long.  Windows told me to rename so it was more runs, then try again.  I finally managed to delete by renaming the directories in a few 'Application Data' to 'a' and then by moving the part of it to another directory.

  Not for the faint of heart, but it's doable if you combine two tools in a Powershell script

  I think that the simplest approach would be to use the http://pscx.codeplex.com/ Powershell Community Extensions to find source of junctions and create new ones to target. Then use SetACL http://setacl.sf.net/ to save the ACL from the source and then restore them to the newly created junction.

  Should not be too many lines of code :-)
  

• How to copy a site server on my hard drive

  I am new to Dreamweaver CS4 and have been using MS Expression Web and FrontPage before.  I'm trying to figure out how to copy a site to a server in a folder on my hard drive in order to modify the site on my HD and then upload (Publish) the editing files on the server.  I started the Site menu and selected new site and the Basic tab. I called the site and left empty URL because this site is to be on my selected HD option button is not to use the server technology (ASP, etc.) and created the path to my local computer.

  What should I choose on how to connect to the remote server.  With Expressions of MS I have FrontPage extensions.  This isn't a choice.  Should I choose FTP or WebDAV?  I guess FTP as I don't know my WebDAV connection information.  I stopped at this point I'm afraid I'm not corrupt sometining on my site on the server.

  Why asked am me server information when I want to just copy the site on my hard drive?  Once the site is hosted on my HD, I would like to be able to download the changes to the file on my server.  In the MS Expressions I could upload (Publish) it only files that have changed.  Is and option in Dreamweaver?

  DW has a help feature excellent that you can use by pressing F1.  The answer to this question and many other operational issues would be there.

  You select a site by opening the files Panel, and then selecting the name of your site (which you gave during the definition of the site) in the drop-down list of sites.