How to copy a site server on my hard drive

Similar Questions

• How to copy the recovery on the new HARD drive partition, HARD drive failed?

  Hallo,

  I have a Compaq Mini netbook with Windows 7 Starter.

  The HARD drive has failed and it is not repairable. However, it seems that the recovery partition is OK.

  I want to buy a new HARD drive, install the driver on the netbook, and then use the tools/recovery partition to install windows 7 on a new PC.

  So, the question is simple: how to copy the recovery for the new HARD drive partition?

  Hello s91066.

  If your hard drive of your laptop doesn't have? If this is the case, what do you mean by the "recovery partition is ok? I doubt that this laptop has two hard disks, so if you are able to see this partition of your hard drive may still work.

  You will need a set of recovery disks to restore the partitions on the new drive. If you can start Windows, which you can probably not with a dead hard drive, you can follow these steps if you can get into Windows.

  If you are unable to boot into Windows, you need a set of disks. You can order it directly from HP. The number of the United States / Canada is 1-800-474-6836. If you are in another domain, you must visit HP's Support around the world to find contact information for your region.

  I hope that is useful; have a great weekend!

• How to copy a folder to an external hard drive with the same file on it and have it just add new files instead of replace all old already on there, as well as to add new?

  I want to copy a folder to an external hard drive with the file already on it and not having to replace all the files each time. I just want to click and drag the folder to the external hard drive and have it add new files I've added in the folder on my pc over time on the external hard drive. It's annoying to have to replace alllll the files each time.

  Thank you!

  A simple way is to use the second copy of Centered.com software. It is reasonably priced and will do exactly what you want. MS - MVP - Elephant Boy computers - don't panic!

• How to copy my photos on an external hard drive?

  I'm trying to move some of my photos on my Mac on my external hard drive. So far, I've tried exporting but it fails everytime and I read on the internet, each site help and can not understand one of them.

  I've only had my Mac a couple of weeks after laptops Windows all my life and it's really frustrating that one is as simple as copy and paste pictures of their folder on my hard drive!

  So please can someone give me simple instructions on how to get my pictures on my hard drive?

  How did the external hard drive formatted and connected to your Mac? It must be formatted for OS X Extended (journaled) with the property set to be ignored.

  

  Also what system version are you running under which version of Photos?

  

• How to copy photos of LR from one hard drive to another?

  Hi, LR peut the photos to copy a hard drive to another?

  
  

  I need necessarily ...

  
  

  The first hard drive I'm a messand I would like to that If LR has copied all the pictures for the second hard drive and created a folder by date.

  Peut it?

  What would be you have me or recommended by another program?

  
  

  Thanks Tomas.B
  

  
  

  Tanuj Sandal said

  Please visit the following links: How to copy files to an external hard drive in Lightroom | Adobe evangelists - Julieanne Kost. Adobe TV

  Despite the title, this video explains how to MOVE pictures, not how to copy.

  There is no way to make copies of the photos using Lightroom, you can move the photos using Lightroom.

  jakubn26183962 said

  The first hard drive I'm a mess, and I would if LR has copied all the pictures for the second hdd and created a folder by date.

  Lightroom will result in no records per day, except when you import photos. If I could make a suggestion, leave your files in the same "mess" they are in now and use the keywords and other metadata to allow you to organize and search.

• How to copy the Lightroom catalog on different hard drives?

  Can you tell me how to register my catalog of lightroom on 3 different hard drives? I have it only on a single HDD from now.

  Hi danielleg,

  Greetings!

  Connect your drives on the computer on which your catalog is present

  Simply copy the catalog and stick to 3 different disks.

  The location of the Lightroom Catalog is typically C:\Users\UserName\Pictures\Lightroom (Windows) and User\Pictures. Lightroom (MAC)

  Concerning

  Jitendra

• How to open a site in Muse that has already been downloaded from our server on my hard drive.

  Ho-I open a site in Muse that has already been downloaded from our server to my hardrive?

  Muse can open the .muse only files. Sites downloaded onto your hard drive as HTML can be imported to Muse. Pages must be designed in Muse in order to be saved as a project Muse that you can still post on the web.

  Thank you

  Vinayak

• How can I copy of PS files to external hard drive using a MAC?

  I am new to using a Mac.  Been easily copy the files for the years using PC.

  Now, I want to copy files to Mac on external hard drive.  I continue to see instructions on how to do it with Lightroom.  I would like to have instructions on how to use PS and Bridge.

  Thanks in advance.

  Photoshop: File > save as... > where: choose the external hard drive

  Bridge: with the external hard drive appears on the desktop: Option-click on the image and drag it onto the external hard drive icon

  and also in the bridge: you can Option-click on the image and drag it on the external drive listed in the records of the bridge Panel

  There are other means, as well

• In iMovie 9.0.4 How can I move events to an external hard drive?

  Note: I am writing this issue on behalf of my daughter, who is an old iMac running 10.6.8.   His version of iMovie is 9.0.4.

  She has about 50 GB, events which occupies about one-third of its HD.  There is an external hard drive with lots of available storage.

  How to pass these events to the external hard drive?

  Thank you

  Owen

  For a long time I used iMovie 9 but this link to the help info gives instructions: http://help.apple.com/imovie/#mov3ac6d42c

  Its probably safer to copy rather than move events (unless you already have a backup) just in case something goes wrong.

  Geoff.

• How would recover my photos from my old hard drive?

  Original title: Please help.
  How would recover my photos from my old hard drive? I have the old and the new hard drive in the Tower?

  Reach... Start / /My computer... and you must
  See the drive letters for the two hard drives.

  Just copy / paste... old record again.

• How to put Windows 7 on the new hard drive without boot cd? How will I know if 32 or 64 bits? This computer yourself running windows 10?

  * Original title: windows 7 download

  I have a laptop dell M4400 with windows 7 pro OA. HARD drive crashed and I replaced with a new one. How to put Windows 7 on the new hard drive without boot cd? How will I know if 32 or 64 bits? This computer yourself running windows 10?

  It has probably comes with Windows 7 Professional 64 bit.

  You can download a copy of Windows 7 Professional using the following instructions (update of Microsoft recovery software supports downloads with the COA key):

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

  You can also use Windows 10 too as you have the right to it as a free upgrade:

  • How to download official Windows 10 ISO files
  • How to: perform a clean installation of Windows 10
  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• I can't find my external hard drive under 'Computer' but it appears in "Devices and printers" How can I access files on my external hard drive?

  I can't find my external hard drive in "computer".

  I just bougth a new HP computer running Windows 7.  I just copied a bunch of movie files, music and photo of my old Mac (OSX Leopard) on a Western Digital external hard drive.

  I plugged the external drive in my HP via USB 2.0 on the front of the computer.  Windows recognizes the drive.  She appears in the Panel of external control/hardware and Sound/devices and printers as "HARD disk".

  It does not appear in 'Computer' under 'devices with removable storage ".

  I just want to get to my files so I can copy them to my new computer.  How to access my files on the external hard drive?  Why isn't he appear in 'computer '?

  Hello ShamedMonkey,

  Thank you for your message.  The problem you are having is because of differences in formatting between PC and Mac.  You can, however, transfer your files between the two.  I will set out what must be done under and limitations of each.
  First, you will need to format the drive on your PC.  When you format the PC, you can format it in FAT32 or NTFS.
  (You mentioned that you do not see the drive in the computer) To format drive:
  Click 'Start' > right click on 'Computer' > select 'manage '.
  Click on "disk management".
  In the right pane, you should see your drive > you can then do a right click and 'format '.
  FAT32:
  This format will allow you to easily transfer files between the two.  This format becomes problematic when you transfer files more than 4 G.  There is a limit of 4 GB in FAT32, etc. of many movies are bigger than that and cannot be transferred using this format.
  NTFS
  This format has no size limitation, however, in its normal state it will be 'Read only' on Mac.  If you will not be able to transfer all the data itself.  While doing some research on the web, it seems that you can use a program called MacFuse on your Mac to change to NTFS files.  I have not confirmed this, but you can give it a try.  If this program works as planned, it would be the way to go.
  Please let us know if it did or did not solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• How many workstations can connect and use a hard drive in windows 7 Professional?

  How many workstations can connect and use a hard drive in windows 7 Professional?

  Thank you

  Randy

  Original title: Windows 7 Professional Log In

  If my memory serves me, 10 is the professional for Windows Server limit.

• I said that I need the permission of the administrator (I am the administrator) to copy a file to one external hard drive to another.

  I said that I need the permission of the administrator (I am the administrator) to copy a file to one external hard drive to another. I used the same computer and peripheral for the past two years with no problems until today when I opened upward after being away on vacation. I use Windows 7. I'd appreciate any help out there.

  BHA

  Original title: the administrator permission

  How to open a file if I get an access denied message?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-i-open-a-file-if-i-get-an-access-denied-message

  Troubleshoot "access denied" when opening files or folders [good for Win7, too]

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-access-denied-when-opening-files-or-folders

  Windows 7: access denied - WHY?

  http://www.SevenForums.com/general-discussion/19745-access-denied-why.html

• OK, I did something "stupid." The hard drive on my computer was full so I copied my pictures to a removable hard drive. Then I deleted them on my mac. I also wanted a new installation of LR, so I uninstalled that too. I reloaded LR and reloaded my drink "

  OK, I did something "stupid." The hard drive on my computer was full so I copied my pictures to a removable hard drive. Then I deleted them on my mac. I also wanted a new installation of LR, so I uninstalled that too. I reloaded LR and reloaded my 'catalogue', but I don't know how to do so that he can look at the pictures on my external HD help!

  wendyh81856794 wrote:

  Oh, okay, I think I got it. If the folders on my computer with the? Use the LR 'catalogue' on my computer, and when I reconnect them, LR uses the 'catalogue' on my external hard drive?

  No Lightroom does not use a different catalog.

  We discuss records, are we not? In the original catalog, you have a folder with one? mark, say C:\Photos, and you used your operating system to move it to F:\Photos. Lightroom has this record showing under the C:\ drive. As soon as you make the reconnection, Lightroom indicates the folder in the drive F:\.

  Oh, and is there a way to do all the files at once? or what I need to do one at a time?

  See Figure 4 and the corresponding text in the document I linked to.