How to create a boot Veristand procedure?

Similar Questions

• How to create and boot from a separate removable usb drive?

  Do some testing software and wish not to overwrite my MBR disk (c :))

  It's a matter of Google:

  http://www.google.com.au/search?hl=en&source=HP&q=How+to+Create+and+boot+from+a+separate+Removable+USB+Drive&btnG=Google+Search&Meta=&aq=f&OQ=

  Help us with the problems here with the Vista operating system installed.

  See you soon. Mick Murphy - Microsoft partner

• How to create Win7Pe boot CD

  Hello

  I had already created a Win7Pe in a usb flash drive and it works perfectly.

  So I burned a CD with the same files (Win7Pe) but the PC will not boot from it and continues with the first HD.

  I tried to put the boot as boot_se7en files... BIF and boot.bsf with Ultra Iso, who said that it is a bootable disk.

  (Unless one of these files it says this isn't a boot disk). Moreover, there is an autorun.inf file.

  Other times, the computer writes the message Press any key to boot from the CD or DVD... and in doing so, he wrote 8000 of up toward the bottom and stop there. What is the problem?

  I would be grateful if someone could tell me how to do a Win7Pe bootable (Win 7 Live CD).

  Thank you

  Konstantinos K.

  Walkthrough: create a Bootable Windows PE RAM disk on CD-ROM

• Satellite Pro A200: How to create Dual boot; Vista & XP using the recovery CD

  I just bought a laptop Satellite Pro A200, which was supplied with the product for Vista and XP Recovery discs.
  The license specifically Vista also XP licenses.
  Can I set up a dual boot so that I can boot to Vista or XP? If so, how?

  I would also like a third boot, Red Hat Linux 9.
  Any comments?

  Hmmm. Usually it s possible to use two or more operating systems on the computer, but as far as I know the Toshiba Vista recovery CD formats whole disk when installing Vista and this will lead to the loss of the OS installed.
  I m not 100% sure on the recovery of the newest XP CD called RECON doesn t CD include an expert mode which allows to choose between the different partitions.

  So I guess that each use the recovery CD will format the HARD drive and erase the installed data. But of course, you can try to install the two BONES and to check if the restore XP CD allows to choose the second part of the installation of the OS.

  If it does not, it seems that you will need to an original XP from Microsoft CD or the original CD of Vista to use the two BONES.

  Best regards

• How to create a boot SSD disk?

  Hi all

  I have a Pavilion p6310y (under Win 7 64 bit home premium) I added an Intel 40 GB SSD for.  I would like to boot from the SSD drive.   The recovery disks that I created will not work with a different size disk (the player to the factory is 1 TB) and I was wondering if there is a way to use the existing installation of windows 7 HP to create a solution?

  Thank you

  Reduce the footprint of your current hard drive 40 GB below!  You may or may not need another external hard drive in order to facilitate migration.  Use a disk product like Paragon Hard Drive Management Suite of Imaging.  You can also burn a WinPE boot disk to facilitate the process. I got my HD on my e9280t up to 32 GB as follows:

  1. disable System Restore

  2. disable hibernation

  3. delete all the necessary applications and migrate the data on the hard drive.

  Now reboot and defragment the hard drive. Reduce your C partition down to below 38 GB using W7 disk management or imaging software features.  You may not be able to migrate the recovery partition, as it is the 8-9 gb.  When you use imaging software, you will notice that you have three partitions. 'system or reserved', C and recovery.  You need the 'system or reserved' and C partitions.   Now, you can try image (copy) the required two partition and the mbr directly across the SSD.

  Once you get the SSD mounted, turning and imaged, then you are ready for a test. You can hit the ESC key on the blue HP screen during startup and select your boot device or go into bios and change the boot order and put the SSD at the top of the list of boot devices.

  If you have only one HD, then you have room inside for mount the new SSD, but you'll need a sata data cable and adapter support.  You must have a spare hard drive power cable but get one before you start.

  If you prefer to go with an external SSD (not mounted on the inside), will need you the following:

  1. an external hard drive (probably 2.5 ") box. You will need a power of cube or buy a box that has a round plug to USB port. ($20 35)

  2. a support extension sata to extend an open port sata (cheap) motherboard

  3. a data cable of stata (cheap)

• How to create Multi boot Operating System CD/DVD with drivers, application as default installation and Recovery Console alongwith with operating system encryption?

  I need an application for creating operating system in multiboot with drivers, application as default installation with the Recovery Console and operating system encryption. Help, please...

  Thanks in advance...

  Hello

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Technet Forum. You can follow the link to your question:
  http://social.technet.Microsoft.com/forums/en/category/windowsxpitpro

• How to create a startup win xp boot cd

  I have an amd 400-1200 mhz with 512 MB mem and a 15 gig hd.  Also a cdrom and dvd player, also a 3 1/2 diskettes.  I have windows xp home with serv pk 1 & 2 ed..  Run all diagnostic tests, but it does not start my hd or the Dominican Republic to cd.  I tried the Dr. disck did to install and they let me in the back and cannot start from the cd win xp disk.  How to create a bootable cd?  I have a second machine with win xp & sp3 with a cd - rw dr.

  Hi regcaim,

  Follow the steps in the article.

  How to create a boot disk for an NTFS or FAT partition in Windows XP

  http://support.Microsoft.com/kb/305595

  How to get the installation discs for Windows XP for installation of boot floppies

  http://support.Microsoft.com/kb/310994

  For reference: How to create a Bootable CD-ROM

• create a boot disk windows 8

  I downloaded and upgraded to windows 8 and still have the key I bought, but did not get a disc.

  my windows 8 will not open now, and after much trying to fix differently he always repeat myself that I have to re start with the startup disk which I do not have!

  How to create a boot disk windows 8 so that I can fix my computer...

  I have a laptop with wndows 8 on it can I create one?

  Neal

  How to create an installation of Windows 8 bootable DVD using the folder of ESD
  http://www.PAGESTART.com/win8esdtodvd11041201.html
  Series of step by step instructions and screenshots on how to burn an installation of Windows 8 bootable DVD.

  If you have a folder named C:\ESD on your hard drive, you can use it to create a Windows 8 bootable installation or repair DVD.

  J W Stuart: http://www.pagestart.com

• Just create a boot SSD drive. You want to minumize what Mozilla wrote in the SSD. You want to change Max and log locations not SSD drive. Anyone know how?

  Just create a boot SSD drive. You want to minumize what Mozilla wrote in the SSD. You want to change Max and log locations not SSD drive. Someone knows how, I could not find where it change?

  See http://kb.mozillazine.org/browser.cache.disk.parent_directory

  You can also install portable Firefox version, if you want to run Firefox on a disc of SS.

  • http://PortableApps.com/apps/Internet/firefox_portable

• Satellite P840: How to create the secure boot with UEFI Bios recovery disk

  Hello

  I have laptop P840 that came pre-installed with Windows 8, which I've upgraded to Windows 8 Pro.
  I then updated to Windows Pro 8.1 by Windows store. Please notify:

  1. how to create a DVD repair or start for windows 8.1 pro with UEFI Bios and boot secured.

  2. I created a USB recovery using the control panel in Windows Pro 8.1. It starts OK. It will be the same as that I've created using the Toshiba Media recovery creator or will it drivers Windows Pro 8.1?

  3. check partitions with disk management, then 3 (450MO, 350 MB and GB 10.90) recovery partitions, 1 EFI system partition and 2 primary (C: programs) and D: for data. I created the recovery DVD and USB 2 disks. Can I remove the 3 recovery partitions?

  Your help will be very appreciated.

  Best regards

  Romero

  I found your previous thread on this topic:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=74272

  > 1. How to create a DVD repair or start for windows 8.1 pro with UEFI Bios and boot secured.
  To be able to boot from sources other than the drive HARD internal, the boot mode must be set to the CSM and secure boot must be disabled!

  > 2. I created a USB recovery using the control panel in Windows Pro 8.1. It starts OK. It will be the same as that I've created using the Toshiba Media recovery creator or will it drivers Windows Pro 8.1?

  Your laptop has been preloaded with Win 8. Right? For example, the USB flash stick memory you just use the Toshiba Recovery media creator contains the Image of Toshiba with Windows 8. Don t mix this Toshiba image with the image that can be created using Microsoft's own backup and restore function. Both are different pictures!

  > 3. Check it with disk management, then 3 (450MO, 350 MB and GB 10.90) recovery partitions, 1 EFI system partition and 2 partitions primary (C: programs) and D: for data. I created the recovery DVD and USB 2 disks. Can I remove the 3 recovery partitions?

  The last partition contains the files on HARD drive recovery. Usually this partition will be created again when you use the Toshiba Recovery disk to put the laptop back to factory settings. So in the case where you n t need this files or the partition, you can delete

• How can I create a boot CD for Windows XP Media Center Edition 2005?

  It is already installed, but I don't have a boot disk and plan on formatting the computer soon, I already backed up, I just need to know how to create a bootable CD. In addition, in case it is important, I have the C:\i386 folder.

  ISO is a disk image of something, and burn you it on cd or dvd. Depending on the size of the ISO is

• I need to create a boot disk for my windows 7 HP Lap Top. All solid leads on how to proceed would be appreciated.

  The Partition that contained my restore system windows 7 has disappeared.  I don't know how, but now I need a startup disk.  Online all I have saturated adware etc...  I also try to restore the partition that I need to know how to re - install windows on it.  I did not receive a disk when I bought my computer.  Thank you

  These days it is rare for sellers to include DVDs with their laptops. Those who make their own PC maintenance create their Boot CD so that Windows is running. It takes less than five minutes through Control Panel / backup and restore. If you skipped this step you will need to ask a friend to burn you.

  To re - install Windows, you have three options:

  • Perform a factory restore using the hidden restore partition. See the HP web page for detailed instructions.
  • Restore the windows of an image that you created some time ago.
  • Order a DVD of restoration of factory at HP.

• How to create the Windows EFI boot partition 7 for USB HDD

  I installed Windows 7 x 64 on USB HDD using Imagex and start at the start of the legacy with success.

  Now, I have to use it on new computers to work with enable EFI boot.

  I don't want to disable boot EFI in these pc since it is at work, but I can't start my USB HDD.

  I can boot windows to GO on similar USB HDD on these computers because windows 8 use EFI boot

  I tried to format the boot as FAT 32 partition and used

  bcdboot C:\Windows /s F: /f ALL on windows 7 x64 PC but CMD showed error and advised to ask for helpI did manage to copy boot
  

  bcdboot C:\Windows /s F:  but it was legacy boot not EFI.Please advise me how to create a EFI bootable partition for  my windows 7 installed on USB HDD to be able to use in EFI boot computer.My HDD   partition 1 FAT 32 300 mb    partition 2 NTFS OS installed 25GB   partition 3 NTFS    Datathanks.
  

  Hey Aung,

  Refer to the steps in the following Microsoft article and check.

  Installation of Windows on an EFI computer: http://technet.microsoft.com/en-us/library/dd744321 (WS.10) .aspx

  Note: To get help, I recommend you post the same question in the TechNet forums and check if it helps.

  TechNet: http://social.technet.microsoft.com/Forums/en-US/w7itproinstall/threads

  Keep us informed on the status of the issue.

• How to create the ISO image of windows 8 with the help of boot, efi, sources, and support files

  Hello
  I followed folders in my USB key:

  Boot
  EFI
  Sources
  Support,

  and the following files:

  Setup
  Bootmgr.EFI
  Bootmgr

  How can I create an ISO image of windows 8 with the help of these files and folders. I even installed ADK, but I couldn't keep up with it.
  I would be very grateful if someone could help me out here.

  Secondly, I would also like to know how to create a system image of WINDOWS 8, where the hard drive breaks down.

  Concerning
  MAK

  If you have the upgrade key, go here

  http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

  You can go for the use of win8 / win7 / vista to match highlights you want - and download the win8 installation and run the installation with your key to download you need to install windows from that.  Will allow you to have an iso bootable.

  Make a picture of the control panel system / Windows 7 file recovery / system Image.  I certainly wouldn't put it on dvd.  It will be too.   Find an old preference portable hard drive and buy a $ 20 usb box, get an external hard drive.

• How to create the script to compile procedure files in oracle - urgent deadline...

  How to create the script to compile procedure files in oracle.    about to go live and have much .prc pkg in a directory usr/tmp/ar... Po... human resources etc. need to create a script to compile all the files in the folder, then do not open all necessary .prc suggestions on how to do it.   Thank you Tom.

  (1) an urgent need, ASAP,... are words that do not in a forum of volunteer. We are here to help if you need it now, for free, open a SR.

  (2) oracle procedures are not files.

  (3) I think you are trying to run operating system packages, no Oracle procedure. right?