How to create a Virtual Com Port in Windows 7 for Palm HotSync

Similar Questions

• How to create a virtual hard drive in Windows XP without using instruments such as Virtual PC?

  Hi guys,.

  I need to know the process to create a virtual hard disk with Windows Xp as operating system and without the help of any tool.software.
  Looking forward to the answer.

  Hi Anuj Mathur,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums to get help:

  Windows XP Service Pack 3 (SP3) TechNet Forums

• How can I create a USB Virtual COM Port

  Windows XP Professional / SP3 / 2002 Version

  How do I create a virtual COM Port to USB, so I can run software applications of a Bus USB flash Drive?
  The reason why I am eager to do it, is because I use an audio sequencer and it requires 1 GB of free disk space and at least 1 GB of RAM is recommended. My machine has 0.5 GB of RAM and a total of 6.55 GB of FREE space. My machine has a 256 MB RAM module and I bought another 256 MB RAM module. The manufacturer said that 512 MB of RAM is the maximum that can have my camera.
  My goal is to buy a 4 GB Flash drive and use it to add RAM on my machine. I am also wanting to be able to run software applications that are installed in the USB Flash drive.
  My basic goal is to install the DAW in the USB Flash drive and work with the program that is in the USB Flash drive, and I hope that will release of enough memory on my laptop.

  Hello

  Unfortunately, you cannot use a USB flash as a substitute for the RAM drive.

  Similar topics as an example with the info:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-hardware/can-i-use-a-USB-flash-drive/70cf81fa-D113-4485-8305-c030665eeac0

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-hardware/can-a-USB-flash-drive-be-used-as-an-external-RAM/d711a70e-6878-4552-933C-423fa04fb222

• How do troubleshoot you a USB virtual COM port?

  Object

  Send orders of Labview to an Arduino board using the Advanced Serial write and Read.VI.

  The problem is that no orders are received by the Arduino.

  However, I can use the Serial Monitor built into the Arduino IDE to send commands to the Arduino and get the required result.

  I checked baud rate, the designation of COM port and the command is a simple as string 600,0.  The VI shows no error message.

  So, I'm looking for suggestions on how to troubleshoot a USB virtual COM port.

  Howard

  
  

• How to create the virtual directory forms 12 c map

  Hi all

  I followed the link to create a virtual directory in 12 c forms, but he failed below.

  https://docs.Oracle.com/middleware/1221/formsandreports/deploy-forms/basics.htm#FSDEP146

  I want to create the virtual directory in ohs1 http server for accessing it via the http server port and the port of Forms Server.

  I want to access the URL like this http:/127.0.0.1:7779/forms/excels/abc.xlsx and http:/127.0.0.1:9001/forms/excels/abc.xlsx.

  Oracle HTTP Server > Administration > Configuration advanced in this i have not seen any forms.conf in the URL of web logic em.

  
  

  I added to forms.conf but it is not accessible. path $DOMAIN_HOME/config/fmwconfig/components/OHS/instances / < NAME of the OHS INSTANCE > /moduleconf/forms.conf

  AliasMatch genres / excels / (. *) "D:\My_dir\$1".

  WLExcludePathOrMimeType /genres/Excel /

  Please review...

  You can use SST to virtual mapping. Simply add these lines to forms.conf:

  RewriteRule ^ / forms/myfiles / (. *) /workaroundmyfiles/$ 1 [PT]
  AliasMatch ^ / workaroundmyfiles / (. *) ""C:\someDirectory$1 ".

  Concerning

• How can I clear the COM ports that are appearing as in use

  Original title: used Com Port

  I have a device plugged into my laptop Lenovo XP with service pack 3 and it is to this day. When I try to reassign the com port on the unit to the USB port using the Device Manager, I find 2 to 11 com ports are in use. How can I erase these com ports as there nothing to use them?

  You are welcome.

  There should be a printers and Faxes folder in Control Panel (see photo)

  http://www.onlinecomputertips.com/tutorials/control_panel.html

  See if that helps

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-hardware/all-the-icons-disappeared-in-the-printers-and/96f54795-d27f-E011-9b4b-68b599b31bf5

  How to remove printer ports in Windows XP

  http://www.ehow.com/how_8120289_delete-printer-ports-Windows-XP.html

  To remove a Port

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/print_delete_port.mspx?mfr=true

  How to remove com ports in Windows XP

  http://www.ehow.com/how_6216286_remove-ports-Windows-XP.html

• How to create a virtual multi-user computer

  Our company has installed a new VDI and I'll put up the new virtual machine for our staff. I ran into a problem where I don't know how to create a virtual machine that will allow several people to connect. I have created several dedicated vm up to this point, but he must now create one where a user can walk up to the virtual machine, choose the journal and then to connect under a different. Any advice on how to implement and what type of pool is necessary are appreciated.

  Thank you

  Create a floating office pool with your desktop into it.  Then when the user disconnects.  User B can connect to the same workstation.  It is about the only way to do it with to a Terminal Server.

• I installed windows 7 on a mac with boot camp and then used parallels to create a virtual machine to run windows inside Mac os10.6. Now he says I need to activate windows again, but he said I need a new activation key. Any ideas would be appreciated

  I installed windows 7 on a mac with boot camp and then used parallels to create a virtual machine to run windows inside Mac os10.6.  Now he says I need to activate windows again, but he said I need a new activation key.  Any ideas would be appreciated

  Yes, you must purchase a full license for the second installation of Windows 7 product key.  1 activation allows only one Windows 7 product key.  Apparently, you now have a second facility that requires a second product key. Carey Frisch

• How to create password protected new folder in Windows 2007?

  How to create password protected new folder in Windows 2007?

  No such thing as Windows "2007"!
  If you mean that Windows 7, then you can not natively. You must use a third-party encryption application.

• How do you get Wi - Fi connection on windows 7 for Wizard secure my wireless connection?

  How do you get Wi - Fi connection on windows 7 for Wizard secure my wireless connection?

  This article explains how to configure and connect Linksys routers very...

  http://www.tech-FAQ.com/how-to-setup-a-Linksys-router.html

• When are you going to install Windows virtual PC XP on Windows 8 for older programs

  When are you going to install Windows virtual PC XP on Windows 8 for older programs

  When are you going to install Windows virtual PC XP on Windows 8 for older programs

  Hello

  There will not be a virtual XP mode of Windows 8.

  Windows 8 Pro includes the Hyper-V virtualization component. Here are some links with more information.

  Survival guide for Hyper-V customer of TechNet Wiki: Http://social.technet.microsoft.com/wiki/contents/articles/7704.client-hyper-v-survival-guide.aspx

  If you have questions about the use of this component, use the following support forum.

  Virtualization of Windows 8 Forum:
  http://social.technet.Microsoft.com/forums/en-us/w8itprovirt/threads

  Concerning

• How to create machines virtual iOS?

  On the page of VMWare Fusion 4 it is said:

  "VMware Fusion 4 is the best way to develop and test new applications for the Mac and iOS."

  ()http://www.vmware.com/products/fusion/migrate.html( )

  However, I can't for the life of me understand how we could create virtual machines of iOS.

  Wouldn't practically to emulate the entire A4 processor in order to run any iOS?

  It's just a typo on the Web site, or have I missed something?

  Thank you

  Josh

  Welcome to the community - as far as I know what IOS will not work on x 86 architecture, so you notice be able to create a virtual machine from IOS - I think you would have to treat it as if you were developing on a MAC or regular Windows-

• Virtual Com ports never get reused after UN-installing of software that use

  I have install and uninstall the bluetooth drivers (Microsoft, broadcom and bluesoliel) in order to obtain different devices to work. When I started this exercise, used by bluetooth comm ports were low numbers (com 4 and 5 for example). If I uninstall the bluetooth drivers, then reinstall the or some other driver, the com port numbers used become com 6 and com 7).  Old ports com can never get reused and there seems to be any place where I can find them (and I hope that free them from their State of limbo).

  Now that I've got things nearby work properly, I get to com 25.

  This also happens with the bluetooth drivers not as my GPS through a series of USB converter. or my palm for synchronization software.

  That is to say the problem is not just with bluetooth. It's with any program that uses a serial port.

  I'm afraid I might run out of com ports, and perhaps these unused com ports consume resources (are they built during startup?)     Hmmmm... Looks like I ran out of space... Al

  Hi again
  Well, I made a variation on your theme
  1 turned on or plugged in devices that could use a virtual serial port - 3 of them
  com 26 2 with one of them, I have attributed it to 25, then 24, etc. all the way up to 3 comm
  That unlocks (disabled the use in indication) for all of the unused ports.

  reassigned the 2 remaining ports to com 4 and 5

  Thanks for the help
  Al

• How to create redundant virtual machines 2

  Hello

  I need to create redundant virtual machines 2 (one online and one offline). 2 virtual machines should be syncronizied.

  How would I do so that my main VM is down for some reason, my other virtual computer could kick

  Thank you

  VRanger quest vReplicator/connection will do the job and is usually very effective when using change block tracking (CBT), allowing it to determine which blocks have changed since the last replication much more quickly, which is useful for the large VMs. replication jobs can be scheduled quite frequently, so that it can not give you time real synchronization between virtual machines He can become close enough

• How to create a virtual machine with apps to play in VMware player?

  I know that this question was probably asked several times before. I searched for the answer and just shot to the top of threads that have a few years. I know a few things have changed since then and I didn't know how that would influence the answers. I want to create a virtual machine with specific applications that will play on VMware player. What is the best way to do it and it is possible for the weak or no cost? If someone knows a tutorial or blog etc I can follow that would be great.  Thank you

  See the article by Alessandro on that... http://www.virtualization.info/2005/12/Guide-to-create-VMX-files-for-VMware.html