How to create the virtual directory forms 12 c map

Similar Questions

• How to create the virtual machine to a virtual machine existed file?

  I have two hard drives on my VMware host. There are virtual machines on a SATA drive, how do I list these files of virtual machines and copy one of them to create a new virtual machine (it can save a lot of my time!). I did this way on VMware server 2.0 because I can see what they were and where they were under Windows. But on vSphere, how can I do? Maybe you guys have other ways to do it?

  Thank you!

  George

  On vSphere, I suggest you use autonomous vConventer instead. It is quite simple and easy to use. Alternatively, you can copy or clone the virtual disk to the virtual machine via the Console (ESX) Service offline

  vcbMC - 1.0.6 Beta

  Lite vcbMC - 1.0.7

  http://www.no-x.org

• How to create the virtual office to replace the local office?

  I wonder how to use View 4 to a virtual desktop to create, so that it replaces the local office. Users will interact with the virtual desktop, as if it was their local office.

  In Citrix, this is the edition Embedded of Citrix Desktop receiver. What is the equivalent in VMWare?

  You can follow this guide to reuse existing users of http://www.vmware.com/resources/techresources/10023 parts

  View customer replace the explorer.exe shell when windows starts, it opens only to the client view, once authenticated you can configure so it connects the user directly in a desktop computer that has been right to their. If the disconnect / disconnect it goes back to the login screen of client to see again.

  You can also do with a linux install, and use the open linux client view.

  Hope this helps,

  Dan

• How to choose Internet Information Services (IIS) in Windows 7 to create and maintain the virtual directory?

  In previous versions as windows SP xp2, I know how chose the Internet information services (IIS), but how to get it from Windows 7 to create the virtual directory.

  Control Panel\Programs\Programs and Features\Turn Windows or turn off features enable IIS.

• How to create the column of the table for long-form Master detail relationship

  Apex 4.1

  Oracle 11g

  I created a form master detail and see the main table hotel_list and table hotel_mapping as detailed below.

  Hotel_list

  ID HOTEL_NAME

  1 Holiday Inn

  Hotel Hilton 2

  Hotel_mapping

  ID HOTEL_NAME MAPPING_NAME

  1 Inn Holiday Inn Select hotel

  2 holiday hotel Holiday Inn Select

  3 hotel Holiday Inn Holiday Inn Hotel

  4 Hilton Hotel Hilton Hotel chain

  Hotel Hilton 5 HiltonHotel

  Table Hotel_name Hotel_list is a linked table Hotel_mapping

  When I add a line to the Hotel_mapping table for the selected row in the hotel_list table, mapping_name of column is null, therefore impossible to create the relationship between the main table and the secondary table.

  I would like to know, how to create the relationship?

  Thank you very much

  Best regards

  Yong Huang,

  simple step see creating a form detailed master with APEX - Assistant Master retail

  and check how to maintain the relationship between two tables,

  simple return the packaged application «Sample of Masters details»

  and try to understand this concept...

  In your example, use Hotel_list.ID as a foreign key in the table Hotel_mapping

  and maintain the relationship with the column ID...

  and choose the display type of the column Hotel_list.ID in table Hotel_mapping as List(Query Based LOV) select.

  otherwise the best way is to create sample on oracle.apex.com

  I hope this helps...

  Leave.

• Java with Minecraft error "error: could not create the Virtual Machine Java.»

  When I try to open Minecraft SP, it won't let me open and there is a message saying:

  "Error: could not create the Virtual Machine Java.".
  Error: A fatal error has occurred. Program will exit. »
  How can I solve this problem?

  Hello

  What is the operating system installed on your computer?
   
  You can ask your question on the Minecraft forums for assistance. Check out the following link.
  http://www.minecraftforum.NET/viewforum.php?f=1002

• How sort us a "virtual directory" IIS7 by date?

  Dear community,

  We have a file folder on our Web server that contains a PDF of information for our employees.
  When an employee needs access to these files, it needs as quickly as possible.
  Therefore, we use the "virtual directory" - feature of IIS as well as Google Chrome as a solution two-click to access and view the PDF files, see attached image.
  When there is a new PDF, the browser does not display it in high because files are listed by file name.
  We include the date at the beginning of the names of files, they are displayed at the bottom.
  How can we change the sort order to 'update'?
  Is there another Plugin for IIS that you can recommend?
  Thank you very much in advance for your help!
  Kind regards
  Gibisch W.
  
  The solution:

  http://mvolo.com/get-nice-looking-directory-listings-for-your-IIS-website-with-directorylistingmodule/

• How to create the cluster in weblogic

  Hello to all the ups...

  We pass our 6i has 11 GR 1 material. After the migration of our very poor server performance. So now, we want to use clusters. After a google search, I have not found any better way to do. We create two independent with machine

  Server Admin

  Forms

  Reports

  Lets assume that the machine name is SACHIN1 and SACHIN2.

  Now, how to create the cluster on SACHIN1?

  Please help me.

  Thank you

  Sachin

  Hi salah

  I understand, he has several steps. The steps apply only to the WebLogic Server.

  To ensure high availability with a top layer products it is WDM. I did research more far and I found that there is a WDM for forms and reports.

  I found WDM for forms and reports 11.1.1.2:

  http://www.Oracle.com/technetwork/database/features/availability/MAA-EDG-frd-129690.PDF

  Is there a reason on why migration is 11 GR 1 matter? first support for 11 GR 1 matter ended in June 2014

  http://www.Oracle.com/us/support/library/LSP-middleware-chart-069287.PDF

  We could get help on the following forums:

  Oracle reports (MOSC)

  Oracle Forms (MOSC)

  Best regards

  Luz

• How to install the virtual machine to ISO image

  Rather than burning a CD from ISO images downloaded from each OS you want to build a virtual machine it would be more convenient to use the ISO image directly. How can I achieve this?

  Create the virtual computer with CD player.

  Double click the CD drive in the virtual machine properties.

  Select USE AN ISO IMAGE

  Navigate to the image.

  and also you can refer to this link

  VMware Workstation 12 Pro Documentation Center

  you're installation uses several CDs pleae follow this procedure

  First duty (if the customer has a button for this) eject the CD in the comments, then ctrl-alt to focus the host, right click on the CD icon in the bar area of low right state of the workstation user interface and select disconnect; repeat, and then click edit. Select the image ISO next necessary; reconnect; then click the mouse back in the window of the customer and to know that the next CD is loaded.

• Create the virtual machine with the ISO mounted CDROM

  Community of hell!

  Working on the vmcreate.pl script to add the creation of CD-ROM with iso data store, I got stuck on the error

  ' Invalid device configuration: ' VirtualSCSIControllerOption.numSCSICdroms '.

  I'm sure I'm missing something obvious, or this option but may not understand how to deliver this.

  I created a cdrom as follows (below test I create any CDROM, no iso file to reduce the number of layers):

  my $ BPPRR m_backing_info = VirtualCdromRemotePassthroughBackingInfo->new)

  deviceName = > ' '.

  exclusive = > 0,

  );

  my $description = description->new(label = > 'CDROM', summary = > 'cdddrom');

  my $connectable = VirtualDeviceConnectInfo->new(allowGuestControl = > 1,)

  connected = > 0,

  startConnected = > 1,

  ( State = > inmates ' / ' );

  my $ BPPRR m = VirtualCdrom->new(backup = > $BPPRRm_backing_info,

  connectable = > $connectable,

  controllerKey = > 0,

  deviceInfo = > $description,

  key => 1,

  ( unitNumber = > 1 );

  VirtualDeviceConfigSpec->new(device = > $BPPRRm,

  operation = > VirtualDeviceConfigSpecOperation->new()'add'));

  Did anyone have working example to create the virtual machine with CDRom?

  Andrey

  If someone will find this useful I followed this route Re: vmreconfig.pl add the device CD/DVD fails if the virtual machine created with vmcreate.pl

  and also I found good examples of what I need to in VMUtil.pm in cmd vmsphere libraries.

  Andrey

• How to create a virtual multi-user computer

  Our company has installed a new VDI and I'll put up the new virtual machine for our staff. I ran into a problem where I don't know how to create a virtual machine that will allow several people to connect. I have created several dedicated vm up to this point, but he must now create one where a user can walk up to the virtual machine, choose the journal and then to connect under a different. Any advice on how to implement and what type of pool is necessary are appreciated.

  Thank you

  Create a floating office pool with your desktop into it.  Then when the user disconnects.  User B can connect to the same workstation.  It is about the only way to do it with to a Terminal Server.

• How to create the script to compile procedure files in oracle - urgent deadline...

  How to create the script to compile procedure files in oracle.    about to go live and have much .prc pkg in a directory usr/tmp/ar... Po... human resources etc. need to create a script to compile all the files in the folder, then do not open all necessary .prc suggestions on how to do it.   Thank you Tom.

  (1) an urgent need, ASAP,... are words that do not in a forum of volunteer. We are here to help if you need it now, for free, open a SR.

  (2) oracle procedures are not files.

  (3) I think you are trying to run operating system packages, no Oracle procedure. right?

• Please show or ask how to create the value of arrayOfValues of setValuesAtTimes parameter?

  Hello AEScriptComm,

  I have a few small scripts that use the method setValueAtTime successfully placing a keyframe on the existing layers of maskPath, but as you can see in the scripts below, results of setValueSatTimeS errors using IE: "Array is not of the correct type", "value is not an array" or "Null is not an object", depending on ,...

  (A) what variable is used as the value of parameter IE:

  .maskPath;

  . maskPath.value;

  . maskPath.value.vertices

  (B) what kind of table is used as the parameter value as in:

  var addTheseKeys = new Array ((1,2,3,4);    (as a parameter of the time)...

  (with either)

  var keyValues = new Array([10,10],[100,100],[15,50],[100,120]);             ...." ]) "

  (GOLD)

  var keyValues = [[10.10], [100 100], [15.50], [100 120]];                               ... (Array of arrays? RE: " ]] " )

  I just read a 'push' of the values in a table may be necessary?, but I was hoping someone who knew setValuesAtTimes could show it please...

  1) .. How to create the value of arrayOfValues of setValuesAtTimes parameter?

  1 (a): WORK setValueAtTime script...

  App.Project.Item (1) .layer (1).property("Masks").property ("mask 1");

  var app.project.item = myProperty (1) .layer (1) .mask (1) .maskPath;

  myShape = app.project.item (1) .layer (1) .mask (1).maskPath.value;

  myProperty.setValueAtTime(1.0,myShape);

  1 (b): If there is no script setValuesAtTimes...

  prop1 = app.project.item var (1) .layer (1).property("ADBE_Transform_Group").property ("ADBE Position");

  var fourKeys = 4;

  var addTheseKeys = new Array (1,2,3,4),

  var keyValues = new Array (10, [10], [100 100], [15.50], [100 120]);

  var app.project.item = myProperty (1) .layer (1) .mask (1) .maskPath;

  myShape = app.project.item (1) .layer (1) .mask (1).maskPath.value;

  var myVertices = app.project.item (1) .layer (1) .mask (1).maskPath.vertices;

  myProperty.setValuesAtTimes (keyValues, addTheseKeys);

  app.beginUndoGroup ("Keys");

  ~ for (var k = 0; k < fourKeys; k ++)

  //~ {

  ~ prop1.setValueAtTime (keyValues [k], addTheseKeys [k]);

  //~ }

  myProperty.setValuesAtTimes (keyValues, addTheseKeys);

  app.endUndoGroup ();

  .. Thanks for any advise\suggestions,

  J

  (A). maskPath.value; It's always a Shape(). (maskPath is a property, not of a shape on its own, and maskPath.value.vertices is only a part of the shape data).

  (B) nothing of what you propose... that is why your failed script fails.

  var keyValues = new Array([10,10],[100,100],[15,50],[100,120]); and

  var keyValues = [[10.10], [100 100], [15.50], [100 120]]; are just as good as arrays of points, the only thing is that keyValues are arrays of objects Shape().

  Read the guide and script for how to report a form of this post (just wrote it...): http://forums.adobe.com/thread/1419866?tstart=0

  Your keyValues array should look like this: [keyValues0, keyValues1, keyValues2, keyValues3], where each entry is a Shape().

  Xavier.

• Unable to create the virtual disk: fault. RestrictedVersion.summary

  Hello

  Im trying to create a virtual disk using the CLI on ESX4i.  The script is:

  vmkfstools.pl - Server 10.190.2.51 - c 20 g d eagerzeroedthick - a free /vmfs/volumes/Internal/test.vmdk

  When the script runs I get error: unable to create the virtual disk: fault. RestrictedVersion.summary

  Can someone tell me why please.  Im trying to create a disk of 20 GB with adapter free with eagerzeroedthick on my internal called storage, (no subdirectory).

  The file system is THAT VMFS 3.33 maximum file size is 256 GB.  The block size is 1 MB.  If it is the block size that is the problem how can I easily change?

  It's in a laboratory, not a production environment.  I need the flag eagerzeroedthick like Im trying to create a passive active cluster node MSCS 2 on a single physical node with 2 machines VMS.

  Thank you.

  Mike.

  If you use the free version of ESXi (U4 and later versions), access to tools like the VIMA API are read-only.

  -Matt

  VCP, vExpert, Unix Geek

• HOW TO CREATE THE WINDOWS MODEL

  Dear all

  I'm new to the ESX Server do not know how to create the window model in EX Server I mean customer infrastructure. So that I can do a lot of copy of windows from this model.

  Kindly help me to solve my problem step by step.

  Thank you

  Malik Adeel Imtiaz

  NetSol Technologies

  Hello

  Create a new virtual machine in Virtual Center - install the software updates that you need in this model etc etc.

  Click right of the virtual machine when you finished and chose "convert model', if you need later update it is again you can 'convert virtual machine' and update before make you a model again.