How to create an effect of selection of text to individual character from the Center.

Similar Questions

• How to create crystallize effect like that?

  How to create crystallize effect like that?

  

  I know that this can be done with the "3D postcard" and make the settings (vertices, edges, lights).
  But how can I create crystallized texture even like that? Then, which would create "postal 3D map.

  But how can I create crystallized texture even like that?

  You can not. Not in PS. It is a Voronoi tesselation motif created by dividing a contour of mesh 3D accordingly. Of course the filter Crystalize product model, but like cards post 3d are based on uniform grid subdivision, you do not get the vertices and edges. There you go...

  Mylenium

• How can I do a multiple selection in Enum control or control of the ring or control Combo box

  How can I do a multiple selection in Enum control or control of the ring or control Combo box

  You can not.

  You can use a listbox control.

  An alternative solution is to write the code and each selection, the user gives an enum, for example, can be send to a table and invite the user to continue to select...

• How to create a link to a file text to a Web page?

  How to create a link to a file text to a Web page? or for example to post a poem to share on the web by e-mail? Thank you

  Put the poem on your skydrive and post the link to it in your email.

• How to create a macro to add specific text whenever I need?

  How to create a macro to add specific text whenever I need (that is, THIS STATEMENT IS TRUE AND CORRECT)?  Rather than having to type it every time I'm looking for a way to save this macro (or action) then I can save time when inserting this text in a PDF file. Thank you!

  Put the text in a text file. From there, you can copy and paste.

• How to make a circle and a lock to end of line (in the center of the circle) and the whole movement?

  I'm new to Illustrator, and maybe it isn't the best master to achieve CS6 software but:

  I have a few circles (13), they are connected to the lines (a line from the center of a circle to the center of the next one, so 13 connecting lines). I need to move the circles to create the appearance that suits me better, but I want the end connection to go together (see photo below). I need to do it often and get immediate visual feedback. How can I do? I use the software wrong altogether?

  Thanks in advance to all who will try and help out!

  

  Use the direct Selection (white arrow) tool to draw a rectangle around the circle which also includes the anchor point or line, and then drag to the new location.

• How to remove individual items from the purchase history?

  Reserved for HOV can I select individual purchases from the App Store on my iPad or iPhone a remove those permanently in history and always keep those I love, or want kerp, in the list. And how can I sort the list, as you could ;-) in Windows 3.0 for MS-DOS

  You can not delete anything of our shopping list.

  You can hide:

  Hide and show purchases from the iTunes or iBooks on your...

• I'm transferring my entire website from my old Web host at GoDaddy. How to copy all my files (in Dreamweaver) to my Web site from the server, it's on now, on my desk? So I can then connect you to my new server with GoDaddy and transfer all s

  I'm transferring my entire website from my old Web host at GoDaddy. How to copy all my files (in Dreamweaver) to my Web site from the server, it's on now, on my desk? So I can then connect you to my new server with GoDaddy and transfer all of the site?

  If you don't have local copies of your site on your computer...

  1 create a new Site definition using your old FTP GS-01 information: definition of a new site. Learn Dreamweaver CS5 & CS5.5 | Adobe TV

  2. Once you have the defined site and can connect, click on the Get (down arrow) command in the files Panel

  3 when you are prompted to hit "get the entire Site? Yes

  4. After downloading the entire site, navigate to the Site > Manage Sites > click the site > Edit > servers > click on the remote server > Edit to enter your new GoDaddy FTP Info

  5. after the test connection to check, you can connect, click the command Put (up arrow) in the files Panel

  If you have a site already defined for your old Web host, go to #4 above.

• How to change the width of the div CSS from the Center?

  Very basic question here, but I'm relatively new to DW. Please use the following url for reference: www.pawnpawn.com.

  Basically, I inherited the site of a previous Designer, who is no longer available. All I want to do is expand the container with our Services, how it works, etc so that contact us either on the same line with the rest. I know how to expand the container in CSS, but it grows to the right instead of from the Center. Here is the original code, without the new specification of width:

  #nav {}

  display: block;

  text-align: center;

  border-top: 1px solid #d3d3d3;

  border-bottom: 1px solid #d3d3d3;

  margin: auto 10px 0;

  min-height: 35px;

  Padding: 12px 0 0;

  If I add "width: 1100px;" he broadens it properly, but not Center. I tried "align: center;" but it was just a guess, and it does not work.

  Any help would be greatly appreciated, thanks in advance and sorry for this fundamental question!

  MP

  Line 24 of skeleton.css says

  . Container {position: relative;} Width: 960px; margin: 0 auto; padding: 0; }

  If you change the width, you will get what you want. The problem is that the entire page will be the new width. You then have the choice either redevelop available to suit or wrap the rest of the page in another container with the width of origin.

• InDesign CS5 and CS5.5, how can we get a large amount of text in MS Word in the pages?

  InDesign CS5 and CS5.5, how can we get a large amount of text in MS Word in the pages?

  I'm just looking to get started.

  It's easy to get a small amount of text - I am using simple methods of "copy / paste" but I have a document which is over 70 pages in size.

  I have it in MS Word format and PDF format and are seeking to use either format (not both)

  Please can someone help me?

  Terry

  File > Place. Go to the Word file.

  Shift + click on the page of your document.

  Bob

• How to create this effect of title?

  Please take a look at the first five seconds of this video:

  http://Vimeo.com/5644416

  My customer wants an opening like that.  I * think * this is something that is built into Final Cut Pro, but I could be wrong.  Someone make a program that works with the first (or standalone on a PC) to create titles like that?

  J. D.

  You can do this with After Effects by using '3D text '.

  -Jeff

• How to create ePUB with full-size images/pages to adjust according to the device?

  Friendly greetings,

  I tried, for almost two months, to convert/create my 7 books that are printed in electronic books; with the first edition had to be Nook, with Kindle on the list. Unfortunately, I am still working on just get the first one published! And I could really use any assistance to get this figured out. My intention was to publish several weeks ago... now my despair must publish before the weather gets too hot and the children are outdoors most of the time... or at least not later than Easter. (: 0)

  First of all, my books are books of photo/poetry for children of all ages. They were all designed in Photoshop, where I also created images full size for the first eBook. I received the specifications of B & N for the different devices of Nook. In the assumption that it would be better to create the largest files, thus allowing smaller size devices to fit the page accordingly to fit and the most important would not encumber a smaller image, I size my pages to 1280px x 1920px at 72 dpi. (now I hear 150 is standard?)

  My text is included in the image that design is an image = a single page. I've included a version only the full text of the poem/story at the end for those who want to set the text or use a voice reader. I obviously all original, but for the publication they were all saved as jpg.

  After a fight and a lot of frustration, I managed to finish the manuscript for Barnes and Noble Nook press Manuscript Editor. My internet is molasses and so much of this has been done in the wee hours of the morning when the rest of the time zone is asleep. I had only a page with a problem, an additional empty line/space was irreparable. I published and it had been completely sloppy to be published, although the preview looked a-okay. Only on the upper left of each image/page 1/6 was visible in the corner of my laptop to PC or Nook of my Tablet Android App. So I desperately waited another 10 hours, hoping that no one would buy my book Meanwhile, so he could be removed from the sale.

  I downloaded a demo of InDesign CC, and after two weeks of not even being able to create a new single document for some reason any twisted, I bought a month membership. So far, I am not entirely convinced of this creative Cloud malarkey together, as much... that, like I said my internet is slow... it took me nearly 20 hours just to download the software. (It is really difficult to provide records, seriously?) After a cat and a phone call that I can, in theory, now use InDesign.

  I created a new Document for Digital Publishing to the above specifications (1280 x 1920 px). I did rectangle the size of the page placeholders and place one image per page. This usually inserted the image to 50% and I have to select 100%, and then move them if necessary to place.

  So my first question is: is it possible to place an image at 100% without having to do this step further resizing? Or is there another way to place the image in the size of the page without any of these other measures that would be too good.

  Well, after placing several pages/images I have also selected each and went to Options of Export Object and checking the rasterization of Custom and "resize to text Flow.  I then exported ePUB trial to see how it would look. On the PC and tablet in landscape mode it was far better than the other, but about oh 1/3 from the bottom of each page was cut. On the Tablet, I turned to portrait and voila full page. Woohoo! But alas, I don't want to limit it.

  is there something I am doing wrong? Did I miss a step or two somewhere so that the complete picture should appear on the page? I feel like I'm about to turn the page on this thing, but he's stuck in the one after that.

  I would greatly appreciate any insight, advice, help anyone can offer. I ran the gauntlet of Barnes and Noble... cough, cough... support and apparently I ask questions that cannot respond to any press corner rep and the forums out there have no idea about InDesign. It's almost like with all fantastic beautiful screens out there today nobody wants to picture books! How National Geographic?

  Thank you very kindly.

  In case it is necessary: my laptop using Window 7 64 bit Pro, InDesign CC is 64-bit and my 10.1 Android tablet. I can view the EPUB files in the corners for PC and Nook for Android. I also have a Kindle, LumiRead and various other applications on the tablet. I also have someone get a glimpse of the finished epub, if needed, on a Mac, iPad, or Android phone... even if I don't have not one of these. Don't know who has a corner I can look good. Thanks again.

  Q: is it possible to place an image at 100% without having to do this step further resizing?

  Here I think you want your images to fit within size full page automatically. For this, you can try the following steps:

  1. create a new doc

  2. menu Goto object, and then choose image mount options

  3. Select adjust automatically and fitting drowdown, select "adjust the content to the frame. See the screenshot below:

  

  After that, your images should adjust automatically in full page placeholder images. Please let me know if this does not work or if the problem you are experiencing is different and I did not understand your problem correctly.

  Kind regards

  POOJA

• How to create a circle from the Center?

  Hello. I'm using PS CS3 and I want to create a perfect circle around the Center. How do you do that?

  I know not pressing SHIFT while dragging makes it perfectly round. I also read that pressing alt at the same time he draws in the Center, but it does not work, it just all just with the eyedropper tool. Am I missing something or is there another way to do it?

  Thank you.

  Hello

  If you click and hold the mouse pointer and press the Alt key and drag, it should work.

  In addition, once you start dragging, add the SHIFT key to constrain to a circle.

• How to create a single init.ora file for node 3 RAC to the title of the ASM

  All,
  
  Our environment is that a combination of different memory machines (V880, V490 & 250R) SUN of size.
  Establishing a single init.ora file that includes each of the memory of nodes in the SGA sizing is our desired configuration.
  Although we have created the file, the question becomes each NŒUD on the FCAC to use this unique setting
  file to launch its database instead of take the default init.ora file in the default directory (asm/dbs).
  
  As we conducted tests of failover, on restarting the instances they have restarted with bad memory
  definitions that have hung the nodes when it took more memory then what was available and the swap space has begun
  to develop.
  
  Steps to configure and activate the process, that's what I'm looking for.
  
  Thank you
  
  Gerry

  Gerry,

  Here's what we do. Don't know if it is relevant to your situation...

  (on each node)
  $ cat $ORACLE_HOME/dbs/initrac11d1.ora
  SPFile='+Data/rac11d/spfilerac11d.ora'

  (as ASM)
  $ asmcmd
  ASMCMD > ls - al + data/rac11d
  Name of type Redund time scratched Sys
  Y CONTROLFILE.
  DATAFILE Y.
  Y ONLINELOG.
  FICHIER_PARAMETRES Y.
  TEMPFILE Y.
  N spfilerac11d.ora-online +DATA/RAC11D/PARAMETERFILE/spfile.267.685170285

  The spfile has all the parameters, described by the node, if any. For example:

  $ sqlplus / as sysdba

  SQL * more: version 11.1.0.7.0 - Production Wednesday, may 6, 19:00:45 2009

  Copyright (c) 1982, 2008, Oracle. All rights reserved.

  Connected to:
  Oracle Database 11 g Release 11.1.0.7.0 - 64 bit Production
  With the Real Application Clusters option

  SQL > create pfile='/tmp/sb.ora' of spfile;

  Created file.

  SQL > disconnected from the database to Oracle 11 g Release 11.1.0.7.0 - 64 bit Production
  With the Real Application Clusters option
  $ cat /tmp/sb.ora
  :
  * .archive_lag_target = 1800
  *.audit_file_dest='/var/Oracle/admin/rac11d/adump '
  :
  rac11d1. Dispatchers ='(Address = (Protocol = TCP) (Host = msdbc11-VIP)(port=64000))'
  rac11d2. Dispatchers ='(Address = (Protocol = TCP) (Host = msdbc12-VIP)(port=64000))'
  * .global_names = TRUE
  rac11d1.instance_number = 1
  rac11d2.instance_number = 2
  :
  rac11d1.undo_tablespace = "UNDOTBS1.
  rac11d2.undo_tablespace = "UNDOTBS2".
  :

  Hope this helps,

  Steve

• I have Windows Vista with Microsoft Works. I would like to make the computer to be bilingual in English and Hebrew. How can I do? Just reply to * address email is removed from the privacy * thank you

  I have Windows Vista and you are using Microsoft Works. I would like to make my computer b bilingual English and Hebrew. How do I dot it? Just reply to * address email is removed from the privacy * thank you

  Hello

  I suggest you follow the steps in the link below and check off the question:

  How can I get additional language files? :

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-get-additional-language-files

  I hope that the information above helps you.