How to cut a video to several clips and export them?

Similar Questions

• How to split a long video into several scenes and exporting?

  Hey there!

  Is probably a newbie question, but please help me I have a video that is made of 5 scenes. My goal is to divide the larger video in the shorter scenes. The end result would be to have 5 different videos on my computer (real media, not an adobe first / prelude to file). What is the best way to go about it, while keeping the same video quality?

  Best

  PS: I tried to use the first Pro CC and cut scenes, then the nest and export. Even if the options have been set to the "Match to the source", my end result was of a different size than the original. By that I mean the Windows Media Player window was greater when I played the original file.

  Thanks for the reply.

  I thought it was too easy job for the Prime Minister to go for a minute or two (which means its more big changes to my file I wanted and later was a witness). I used Avidemux do the visited took less than a second, and this was the solution that worked for me.

  Best

• How I've spread my video into several parts and save each file under different names?

  How I've spread my video into several parts and save each file under different names?

  You are going to need a video editing package to do this, you can not cut just to the top of the video into segments at the file level.

  With an editor, you can then crop the video into segments

• How can I open 2 different pdf files and show them separately on 2 different monitors?

  How can I open 2 different pdf files and show them separately on 2 different monitors?

  Hi thomasr1953,

  You will need to uncheck 'Open documents as tabs... new' under ' Edit > Preferences > general "so that the two PDF files open in separate windows.

  Then, you can drag the second file to the second monitor.

  Kind regards

  Ana Maria

• Using a loop on AS3.  How to create instances of a class 1000 and put them in a vector/matrix?

  Using a loop on AS3. How to create instances of a class 1000 and put them in a vector/matrix?

  public var newArray:Array = [];

  for (var i: int = 0; i<>

  {

  var newClass:Foo = new Foo();

  newArray.push (newClass);

  }

• How to improve the video quality using effects and settings in Premiere Pro?

  Hello, I cut out a short excerpt of a video I did and as you can see, the quality is poor. What effects and settings should I use to make this video look more professional and high quality, so I can export a nice video looking for youtube?

  Thank you for the help

  Lots of good advice here. Thank you! I'll work on lighting and watch all these tutorials.

  Thanks again for the help!

• How to cut a picture on an image and then give him the normal air?

  I'm new to paintshop. I have a picture that I cut out a person, and I can do it, but after I cut the image how the image new normal appearance... For example in this picture I can cut one of the tennis people, but how do I put the net return ect...

  original image.

  cut the photo.

  The effect I'm looking for, it's that there are 2 tennis players playing a person on the other side. How do I add a layer or all I have to do to make it look real... Don't know how to fix the net. I can make the color of the ground and maybe add the white lines. I cut out person very fast just to show them. I would have taken some time to cut the person better, but it's just a picture of example for anyone.  Thanks for any info. I had a stroke a few years ago so my words are not great a few times. Thanks again for your time.

  Rather than simply cut the person, make a selection of the person and use Content Aware Fill (SHIFT - F5) to remove the person. Photoshop will do a good job of filling in the selection

  

  

• How can I match volume across several clips levels?

  Let's say I have two clips:

  (a) a clip with speaking people - its a little low is recorded

  (b) a clip with people talking and a loud noise (eg. a shot) in the Middle

  How to match the audio levels so that people are talking at the same volume in two clips?

  "Normalize" does not work because he smashes the gun to the Center (2).

  Looks like a very basic requirement for video editing. There must be a way to do it automatically... but I can not find one.

  Do manually is very time-consuming and error-prone (the human ear are not good to corresponding to levels of volume on hundreds of clips).

  This tutorial can help you:

  Premiere Pro CC: Pushed and smooth Audio levels. Final Cut Pro Training & Classes

• How to apply the look across several clips

  In Adobe SpeedGrade, I look and I know how to apply it to a clip.  How to apply to multiple clips?

  If you're the direct link of first, I add an adjustment in the first layer and add the SpeedGrade LOOK to this adjustment layer.

  If you have something like a multicam editing, and all of your scenes are broken up, as in scattered amongst many other cuts, I do not add looks like this sequence. I add the LOOK to the source sequence.

• How to cut an image to several party's limits.

  Hai me Barach... im making robot in library. the vision of the robot system is so very important. How to segment or to reduce an image into several parts of cunning edge detectors (which limits image) of the King... im using vision assistant this work... here, I download the image... give someone idea please comment...

  Hello

  Have you tried using 'IMAQ find brods 3.vi' ("Stirrup" under LabVIEW or "Advanced straight edges" palette in the Vision Assistant)?

  It should allow you to detect each vertical edge of the book.

  Select a rectangular KING, in the middle of the image (above the book request numbers), then search for the vertical brods using 'the left toward the right direction. "

  Please see screen capture from the Vision Assistant, attached.

  Best regards.

  JC Benoit

  The vision engineer

  Alliance Vision

  www.AllianceVision.com

• How to create a video page, several (not youtube) videos, with button triggers.

  How do you define a page for videos, with a common area of the target, each video loaded with a different button (not the youtube videos) trigger?

  You can use a widget of Composition at the end and have hosted videos to your site (if it's an online service) play using the HTML5 video tag. A thread similar here on the use of this HTML tag - http://forums.adobe.com/message/5210727.

  Thank you

  Vinayak

• How to cut a clip and export using the same file format

  I use CS6 on a Windows 7 system. I have a MB 304, 8 HR record from a workshop that I put on recently and I would like to extract the different sections of the workshop in their own files.

  Here's the info from the source file:

  Type: MPEG Movie

  File size: 304,0 MB

  Image size: 1920 x 1080

  Frame rate: 5.00

  Audio Format: 16000 Hz - compressed - Mono

  Project Audio Format: 32000 Hz - 32 bit floating point - Mono

  Total duration: 07; 35; 20; 25

  Pixel format: 1.0

  My ideal solution is to delimit work areas that cover the section I want to extract and then export it to the target file by using the same parameters as the source file.

  So far, the resulting files have been considerably larger than the source file, so I hope that there is a simple way that I'm missing.

  THX!

  So, can you go down to set rates manually? It's been a while since I used CS6, but I think that the option was there... and something you can do to help, is to say MediaInfo on your computer...

  Media Info: https://mediaarea.net/en/MediaInfo

  Drag & drop your clip on that, it will tell you the exact wrapper and the codec used, including the bitrates & such. You will know exactly what your current clip is this way. Build a preset to match.

  Neil

• Several Clips = multiple exports?

  Small question:

  I filmed a local high school football game and I just finished pulling up on the video track 2 on 30 good snippets in PP4.0 I want to use in

  another program slide show. I deleted the rest of the video game 1.  Now he has worked much, much better in ProShow Producer if I can make each clip a separate video clip.  Not a 10 minute long video with

  30 contiguous clips.

  Is there a way I can export all 30 clips without all the clips into one video?  In other words, is there a way to export 30 clips 30

  separate video exports without having to go to the trouble to export 30 different videos?  That sounds confusing...  Clear as mud?

  TKS Tom

  Hunting and able123,

  He asked if there was a way to separate clips * without * having to do 30 separate exports.  The answer is no, not in Premiere Pro and not in VirtualDub.

  As Hunt said, using the space bar to work in public relations to implement exports is the most effective way to make exports.  Here's how (it goes very fast):

  1. Target video and audio tracks that contain clips that you want to export.
  2. Press the home key to move the head to the beginning of the sequence.
  3. Press the Page down key to move to the next cut.
  4. Press Alt + [to set the left end of the WAB.
  5. Press Page down to move to the next cut.
  6. [Press Alt +] to set the right end of the WAB.
  7. Press Ctrl + M to open the export settings dialog box.
  8. Configure your export settings as desired, making sure that the export range is set to the workspace toolbar. You have only to do once.  After that, Pr will use the settings that you just put for subsequent exports.
  9. Name your export file, then choose save location.
  10. Export to Adobe Media Encoder queue.
  11. Return to the timeline, the repetition of step 3 above, with just a small check to step 8 things still defined as you wish.
  12. Once all your exports are in queue (or anytime after the first export is in queue), start the encoding queue in the SOUL.

  The method of VirtualDub is useless, since you have to visually move the slider on the points that already exist such as cuts in the sequence of the Pr, which significantly increases the amount of work you need to do.  Not to mention the time it takes to export the AVI file that you would use in VirtualDub of PR.

  tested with black video... which made things a bit more complicated because the shift in virtualdub aligns with key frames and black video has not

  This is false.  Black video has nothing to do with keyframes.  Keyframes are used in temporal codecs as MPEG2 and MPEG4 variants.  A video image that contains all the image information in the frame is a keyframe.  Each pixel of an image key is compressed.  Following frames contain only pixels that have changed since the last keyframe.  A keyframe and its associated temporal images (often called P and B frames) are a group of photos, or GOP.

  Afterdawn guide was referencing DivX files, AVI files that contain a variation of the MPEG4 codec, which is why using the SHIFT key has been so important to move between keyframes.

  -Jeff

• How to import the logo into the clip and display it during the full clip

  Hi all

  I use Adobe Premiere Pro CS4.

  I am now a different DVD project that I've done since the time.

  Now, I'll use these them in a commercial of things if I want to add a logo on the clips to keep my rights... etc.

  Here is the situation:-

  (1) the import of the item in Adobe Premiere Pro CS4.

  (2) import the logo image I want to use.

  (3) right click on the video file and click Insert.

  Now, I want to know how to import the image file into the video so it's being there during the full clip?

  I tried several times to import it, but found that it displays seperatey after or before the clip or in the environment I want to be displayed during the entire film.

  Also, it is great when I posted I want to resize it to be in the upper right of the clamp.

  Thank you very much

  Sorry for the bad English.

  has taken more time than I thought... and it's just basic examples... may be refined more...

  with more time and reflection... .but gives you the basic ideas of... read the caches of combat and transparency... etc...

  -----------

  samples
  white background... .with hide by approach
  becomes transparent... letters, Black opaque, translucent gray

  

  transparent background
  black and white letters are shown as is with no cache by approach

  

  transparent background with matte...
  now white letters serve as mask and allow the image through only the white letters

  

• Very much a beginner. How can I cut someone on a group photo and move them to another part of the same photo?

  I have a group photo and I would like someone from one side of it to the other. I would like to know how to select this person, cut him and stick him in a different place on the image. Is this possible? If so, how? Thank you!

  Try this

  Using Photoshop | Moving and Patch content-Aware