How to cut an object half without appearing where I cut it?

Similar Questions

• How can I indent a paragraph WITHOUT creating spaces above or below?

  I use Dreamweaver CS3 on a Macintosh G5 running OS 10.5.5.
  
  I chose a new document HTML (Dreamweaver opened as a CSS) and pasted the text in a MS Word document.
  
  When I 'dash' THROUGHOUT the text, everything remains the same except that it's ALL indented.
  
  BUT when I 'dash' single paragraph while paragraph is not only back, BUT there ALSO appears an extra space before and space after this paragraph.
  That this fact is inserting < blockquote > before and after the paragraph.
  
  How can I 'dash' a paragraph without appearing before or after the paragraph?
  
  Also is it easily possible from the page design?
  I tried to insert a tag by pressing the button 'tag' on the keyboard but that does the same thing as using the feature of "withdrawal" (which is also inserted spaces before and after the paragraph).
  
  BTW: I am a novice, so please try to make it as simple as possible.

  I wonder if what you are really wanting to do is dash all
  paragraph, not the first line.

  It is a collection of first line blah blah blah blah blah blah blah blah
  blah blah blah blah blah blah blah blah blah blah blah blah blah blah
  blah blah blah blah blah blah blah blah blah blah blah blah blah blah
  blah blah blah blah blah blah blah blah blah blah blah blah blah blah
  blah blah blah blah blah blah blah.

  It would be a paragraph indented blah blah blah blah blah blah blah
  bla
  blah blah blah blah blah blah blah blah blah blah blah blah blah blah
  bla
  blah blah blah blah blah blah blah blah blah blah blah blah blah blah
  bla

  If the second is what you want, use CSS according to the instructions to set the LEFT
  MARGIN (left margin) for the amount you want to put in the background, like 15px.

  If this isn't what you want, do what I did not write this.

  Mad Dog

  pppp145pp wrote:
  > Hi Osgood.
  >
  > Thanks for the advice.
  >
  > There is a problem in that where text is too long for a single line
  > goes on the next line, it is not indented (but starting at the edge of)
  (> page).
  >
  > How to overcome that?

• How to cut a shape of the object a picture and put it in its own?

  Photo cut and save

  How to cut a headshout of one person on a phot with several people in it and then save it as it's own photo?

  You might cut back on the part you want to save as a
  new photo.

  (be aware... If the original photo is not high quality...
  your cropped section can be grainy)

  Many photo editors have the ability to crop but since
  I don't know what you have installed... I'm going to suggest
  Windows Paint... (Start / Programs / Accessories /)
  Paint) to help you get started.

  Try to open the picture in paint.

  File / open... Find and select your photo.

  In the top left panel, left click the Select button.
  (looks like a rectangle made up of points)

  Left click / drag a rectangle around the portion of the photo
  that you want to copy.

  Now, you'll see a dotted line around the selected area.

  Reach... Edition / copy.

  Reach... File / new.

  Reach... Editing / paste.

  Reach... File / save as.

  Choose a backup folder.

  Enter a name.

  Choose a format (JPEG).

  On the left, click on the "Save" button.

• How I cut away an outline object?

  I'm new to illustrator, and I'm trying to recreate the Orange Lanten symbol for a hoodie.  I want to make a single color to the proof of the printer.  For this I need to know how to cut a circle symbol.  Here is an example of the symbol, but instead of a white background and the black lines, I would like to make a circle of gold with the line of cut away so I don't need 2 print colors on the jerseys.

  

  All features must be converted to outlines. You then use the pathfinder (the palette, not effects) to combine the symbol. After that, use the pathfinder button to exclude to perforate the symbol out of the circle. Assuming you are using Illustrator CS4 or 5. Otherwise, you will need to press ALT when you click on the pathfinder button.

• Thought I knew Adobe... but may not know how to rotate an object in AdobeMUSE. Help?

  I can't figure out how to rotate an object in Adobe Muse. I want an object half a bubble off Plumb.

  Hello

  You can rotate an object in Muse by using the transformation tool bar and choose the angle of rotation. Please refer to this screenshot:- http://prntscr.com/52vtux

  However, if you want to create a circular eye object, then all you need to do is, appearing rounded corners, take the height and width and then increase the radius of rounding. That would give you the desired result.

  Please refer to this screenshot:- http://prntscr.com/52vu9n

  Hope this helps

  Kind regards

  Rohit Nair

• How to reinstall sound Unimodem driver without reversing the BCM 56 K Modem update Windows automatically installs?

  I am using Microsoft Windows XP Professional, version 2002, Service Pack 3.

  I recently reinstalled my operating system on my Dell Dimension 2400 PC and allowed for automatic updates.  Previously I did not allow updates.  I use very slow dial-up on a BCM 56 k

  Voice/Fax/Modem.  My previous connection was about 26 Kbps.

  During updates of Windows XP, Microsoft notified me of the update following software:

  (Broadcom Corporation - Modems - BCM. v92 56 k Modem, size: 2.8 MB, Broadcom Corporation modem software update published on August 27, 2003.) only the Microsoft Update downloaded and installed on my PC.

  After the installation of update BCM, my modem went much more quickly in about 40 Kbps, however, I lost the Unimodem half-duplex audio driver configuration.

  After the automatic BCM update, my modem sounds is the audio connection as he had done before.

  I checked and the following driver files still exist where they belong: [C:\Windows\system32\drivers\ks.sys; C:\Windows\system32\DRIVERS\MODEMCSA.sys; C:\Windows\system32\ksproxy.AX; C:\Windows\system32\kuser.dll], however registration is missing in browser, under 'Sound, video and game controllers' Device Manager where it was previously before the upgrade.

  How can I reinstall my audio Unimodem half duplex driver without roll back my BCM upgrade?

  My audio driver is not my problem.  The speaker still works in my Modem when I have dial-up.  Otherwise, the rest of my sound works fine, so I don't think I need an audio driver.  What's missing on my upgrade was my driver for unimodem half duplex, and everything remained the same after the upgrade.

  Here's what's happening.   Often, I reinstall my OS together by formatting my hard drive.  After the initial installation and install the drivers for Dell provided, my modem works fine, but at a slower speed.  When I switched I hear the dial through my external speakers, which I prefer because I have restriction of hearing Audio and can hear it better amplified by the modem speaker.

  When I install the update to windows BCM, it accelerates the rate of transfer of my modem, I like, but it removes my driver audio unimodem half duplex, which means I can hear is no longer my dial-up connection to know everything is going well.  The sound comes directly to my modem card, however, due to the location under my desk, my PC I can barely hear the connection is established and can not use this sound for diagnostic purposes if I can't connect.  It allows to hear the connection to remind me in case the line is disconnected or the phone company disconnects and provides their voicemail automated on how to restore our service.

  I just want to still hear my modem amplified through my external speakers without losing speed BPS who provided me the upgrade.

  Not yet tried to use the dell service tag for Dell drivers.  Don't know how to specify this tag, or if it would provide other drivers that I already downloaded, but will check the next.

  In the meantime if anyone has a useful answer as to how I can get my external returning without sacrificing my BPS speed increase, I would like to hear it.

  Thanks for all the answers everyone, even if for the time being not useful yet.

  I don't think that it is half-duplex driver Unimode (even if I'm wrong).  My XP3 box has a Unimodem full-duplex audio driver "" list in the device under ' Audio, video and game controllers' Manager, and I've never had the modem sounds come through the main speakers.  [The difference between "half-duplex" and "full-duplex" is if you wait until a part expresses before the start of the other or if both parties can talk at the same time.]

  Rather, apparently some - but far from everything - modem drivers have a checkbox somewhere in the modem properties dialog box (accessed through Device Manager or control panel > modems Options and) who runs the sound of the system's external speakers.

  While you're in the control panel > phone and Modem Options, click on the "Advanced" tab and check the Unimodem 5 Service provider is installed.  It must have been installed by default, but if not, you might want to add (using the 'Add' button).

  I suspect that your previous modem driver - which limited the speed of your connection - had the external speaker box, but that the new driver - who has more speed - connect does not work.

  It is probably not very satisfactory, but you can increase the volume of the tiny speaker of the modem (a little) by using the "Additional initialization commands" box in the "Advanced tab" in the modem properties dialog box.  There are two relevant orders, the order of M (which determines when the speaker is on) and the command L (which sets the volume of the speaker):

  M0 speaker always off [that's a zero]
  M1 Speaker is activated when the modem is off the hook and the carrier is not detected. [default]
  M2 The speaker is always on.
  M3 Speaker is activated after dialing the ends and turns off when the carrier negotiation is complete.

  L0 low volume
  L1 low volume
  L2 medium volume
  High volume of L3

  Orders are entered, preceded by "AT" (without the quotes) in the box "Additional initialization commands", and there is no spaces.  Thus, for example, if you want to hear the sounds, most at very high volume (which unfortunately is usually not very high), you define L3 and M3 by entering the following text in the box:

  ATL3M3

  With regard to the number of Dell's Service: on the page linked in my previous post, there is a link "enter serial number".  If you click on this link there is a box to enter your Dell service tag (and yet another link to tell you how to find if you don't know where it is).  Dell uses the "service tag" to identify your specific computer hardware configuration, because the same model Dell (e.g., Dimension 2400) can come with a variety of different hardware options.  Using the service tag is supposed to customize the material presented to you so that it is applicable to your computer.

  Sorry I couldn't give you a better answer on your modem sounds.

• I can't display image icons when working with my photo folder. How can I see the photos without having to click on them in preview mode?

  I can't display image icons when working with my photo folder. How can I see the photos without having to click on them in preview mode?

  -It used to work and for some reason, now it does not work

  Greetings, d_chiuch1104,

  There is one thing that I know that you need to check that COULD be your problem.  Open Control Panel (in Classic view) and click Folder Options (or, in Control Panel, click on appearance and personalization and then Folder Options).

  Open the view tab and make sure that "Always show icons, never thumbnails" is NOT checked.

  It would be good to hear from you as to whether that was the problem!

  GL - Bob

• I have Windows 7 Vista. I asked several times how to open a web browser without using my mouse and the other person has given me the right answer yet, or I misunderstood the answer (the more likely scenario)

  Given that I can't grasp how to open a browser window without using a mouse, it dawned on me that I can open new windows in just a window browser.  In fact, I would like that my home page contains all my most visited sites.  However, I am such a novice at this, I don't understand half the jargon, as what is the difference between a window and a tab.  I am a CPA, and for the first time in my life, I have no support from the computer.  I have called my programmer to answer questions and fix my computer.  Now I'm on my own and not completely lost since I tried to learn from my programmers, but we can't assume that I know nothing (or almost).  Thus, when answering my questions, please pretend I'm in third year.

  What is the difference between a window and a tab, and how can I open multiple windows web browser that a

  Hello tterrie,

  In addition to the link provided by Rick, here's a complete list of available shortcuts Internet Explorer.
  Hope this helps

  Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to use reveal all this without losing the work of culture?

  My workflow is to editing and cropping of images. I need the flexibility to perform any order.

  When I use the crop tool, I continue to delete the cropped Pixels unchecked. When I edit the images I want to edit the complete picture, not cropped image.

  If I use reveal all to make alterations on the full image after cropping, I lose my job of cropping. Is there a solution?

  How to use reveal all this without losing the work of culture?

  How to take a bath without getting wet?

  Enter drollery side you could use a path of access to store the current size before calling "Reveal everything", then later on the path as a selection of load, switch to the crop tool and hit.

  Or convert to smart object before you crop, then do the editing in the SO (it could be a potentially significant increase in file size, however).

• How to cut between clips?

  I don't know how to cut between two elements in a sequence.

  I downloaded a screencast documenting my frustrations: http://youtu.be/gIMspPJxXF4

  After download and carefully read Cup two-camera shoot and watch Multicamera editing in Adobe Premiere Pro CS6 - YouTube which is a little outdated since blocking UI is now hidden in the program monitor settings, I managed to make a montage which switches between my GoPro of my head and my screencast. But I found the whole process "Multicamera" a little long-winded. Am I missing something?

  Also on the same sequence I found unable to apply a fade to white transition both the screencast and the video of my head at the same time. Maybe I am not versed in the selections.

  Hello!

  He almost got it. First off you need not unlink the clips to isolate just the video or just audio. Don't forget to press ALT and then select the video and it will highlight only the video and not audio related.  Well, aside from that, you were very close... You see on the left side of the timeline, you have a box that says V1 and if you hover over the V1 on the right it says "track targeting...". "For the moment, you have targeted V1 track which is normal. That's fine, but your nested multicam clip is on track 2. If you can bring to the track #1 or deselect targeting for track 1 and select only the V2 to target 2 track and then the multicam window will appear as it should. So close. Happy editing!

• How to scale a symbol mapped without entering the extrude/bevel palette?

  How to scale a symbol mapped without entering the extrude/bevel palette? I just want to take 3d art and resize it to the top. I don't want to change just the object, I want to scale the symbol that is mapped to the object as well.

  I just thought of it. I need to click on "stroke and scale effects. Duh.

• How to use smart objects to make models?

  Hey guys,.

  I was download a few models to use in my wallet and I want to start making my own for some I can not find on the web. I managed to do an asset realistic looking for what I want, but I don't know how to add text and other things. Usually, when I open a downloaded PSD mockup I double-click on the smart object, edit the content, press on save and BOOM it is perspective for whatever I change.

  However, I made dynamic object and I am trying to edit the content, so when I double click it just opens the new and all purpose that I created ad, but it does not save the prospect. If that makes sense... (see the screenshots)

  So my question is,

  How to make a dynamic object to change the content (text, images, logo, etc. etc.) on a plain PSB and PSD so it registers in the corner or point of view I want? Is there something different that I do. Can we make a step by step guide?

  It's my design until I double click on the smart layer

  

  Here is the image when I double click on the active layer (not exactly what I want).

  

  Here's a mockup I downloaded when I double click on the next show pictures of what I want.

  

  That's what I want to do in my design of the original, but how do I get the text to do it with a smart object? I want to change the text in my design and apply (not necessarily this design, but my own) to my dynamic object (first image), I created in photoshop. How can I do this?

  

  Make the text of the same size or larger and put it into a smart object: filter > convert to smart object.  Without it, you can turn the text, but you do not have as many transform options.  Once you have the text in the dynamic object, select Edition > transform > warp.  Then you can drag the corner of the text points to fit the shape of the card.

  

• How to cut a textframe and place it in the specific position in an another textframe?

  I need to export to RTF. So I have to select the content of the textframe.

  As you can see below,

  first of all, I have to replace all the master page objects (like the task bar and the page number).

  Second, then cut the two objects and paste them into the bodytext and set the anchor and position.

  I have so many files to do from time to time.

  

  So I write the code below (indesign cs 3 javescript, just trying to make a simple example):

  var = app.documents jobbar [0] .pages [0] .textframe [0]

  var pagnum = app.documents [0] .pages [0] .textframe [2]

  var bodtex = app.documents [0] .pages [0] .textframe [1]

  App.Cut (App.Select (jobbar))

  bodtex.insertionPoints [0] .silence = app.paste)

  App.Cut (App.Select (pagnum))

  bodtex.insertionPoints [0] .silence = app.paste)

  bodtex.textFrames [0].anchoredObjectSettings.anchoredPosition = AnchorPosition.ANCHORED

  bodtex.textFrames [1].anchoredObjectSettings.anchoredPosition = AnchorPosition.ANCHORED

  .....

  It does not work.

  I want to like this. The main problem is that I don't know how to put an object into the position of a textframe specfic.

  

  Thanks in advance.

  Ah, you want to create an anchored object (or an inserted object).

  Refer to the instructions on the CS5 Scripting Guide p.89.

  You will need to create a new image with bodtex.insertionPoints [0].textFrames.add () and then manipulate the properties. You may or may not have some success with the .properties property.

  I can't see why you want to use the selection. It's always bad, but it can be easier.

  app.select(jobbar);
  app.cut();
  app.select(bodtex.insertionPoints[0]);
  app.paste();
  

  But good scripts do not change the selection. Which should be reserved for interactive works.

• How to ship iMessage by default without disabling?

  Hi, does anyone knows how to ship iMessage by default without disabling? It was really painful for to change me the iMessage message text before it is sent successfully. Is there a way to default to text messages? Reason not to disable iMessage is because I always want to receive, do not want to send it. Thank you very much.

  This isn't a feature of iOS or iOS app of e-mail. If your camera is actively registered and connected to iMessage and you send to another user filed iMessage to Apple, then the messaging application intrinsically will attempt to send through the iMessage to Apple service.

  The only way to go back to SMS as the default is from you disconnect from iMessage and disable the use of the service on your device.

• How can I remove Icloud account without password?

  How can I remove Icloud account without password?

  Some things to note-

  -an impossible to delete an iCloud account if you can remove a device.

  -If your wish is to remove an iCloud account, simply remain dormant.

  -to answer your question, if the account the disconnection of a device, you will need the password to the account.

  -If you have forgotten the password, then go here https://iforgot.apple.com