How to deepen the administrator rights on the computer?

Similar Questions

• How and when the computer turns off automatically?

  Listen to internet radio, Sys Pref > saving energy on the default setting, wake up and radio program cut.

  This is great... .buth how and when the computer turns off?  When I reopen it wifi comes back, I'm correct when she stops she also turns off wifi?

  Hello allan299,

  Thank you for using communities of Apple Support.

  According to your post, I see that you have any questions on how and when your computer shuts down, and how the WiFi on your Mac is affected. I know it's nice to be able to properly manage what happens when your computer stops and starts in mode 'sleep'. I'm happy to help you find the best resolution.

  You're right, when your computer stops completely it will turn the Wi - Fi. If you enable the wake for network access, Wi - Fi remains lit, and you can access shared resources on your computer, such as printers or iTunes shared playlists even when your computer is in "sleep". Definition of a calendar closing and start on your Mac can also be useful.

  Check out the following resources that will help the set options that control the energy use of your computer, sleep, and wake-up times for your Mac and the calendar from your Mac to turn on or turn off or go to sleep:

  OS X Yosemite: energy saver Preferences

  OS X Yosemite: set sleep and wake up on time for your Mac

  OS X Yosemite: A schedule for your Mac to turn on or turn off or go to sleep

  Best regards.

• How to reset the computer to start the boot minimum troubleshooting.

  I posted this screenshot because I have no idea what can be the maximum size of a question and I thought I have copy paste this but I to Sir's life saw the question so I did this. Additional information that could help. This is my task manager open resource monitor and windows firewall not wanting to tk starts. And I have windows updates where I chose to update (I try to deny each update.) And so far I've checked that I have 482,5 MB of updates of windows that say I should put to date. (apperently 130 important and 10 optional) in addition apperently my computer don't think that I am administrator I do not understand when I'm the only profile on the computer.

  Hello

  In response to the information provided by you, please try to follow the methods and check them off below if this can help,

  Step 1: Scan of Sfc.

  System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files.

  Follow the steps below to perform a scan of the SFC.

  1. press the Windows key + X key.

  2. Select prompt (admin).

  3 type the following command:

  Sfc/scannow

  Step 2: Clean boot.

  Make your systemclean boot State helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  https://support.Microsoft.com/en-us/KB/929135

   

  WARNING: After troubleshooting, refer to the section «How to reset the computer to start normally after a boot minimum troubleshooting»

  Please let us know if the problem is resolved or you need additional assistance.

  Thank you.

• I want to know how to restore the computer to its factory settings, when I bought from a private party and have an administrators access code

  I want to know how to restore the computer to its factory settings, when I bought from a private party and have an administrators access code

  Hello

  What is the brand and model of the computer?

  The best method is to contact the computer manufacturer for help on how to set the computer to its factory settings.

  Hope this information helps.

• How to get the computer out of safe mode of power

  How to get the computer out of safe mode of power

  Hello jeffg56,

  I understand that you want to leave safe mode, follow the steps below:

  Exit Safe Mode:

  1. Click Start, type msconfig in the search field and press ENTER to open the System Configuration window.

  2. On the general tab of the System Configuration window, select Normal startup, and then click OK.

  I hope this has been helpful, please let me know if you need more help.

  Thank you

• BSOD and how to refresh the computer

  I have a gateway to window computer 8 I've had for a year now and never restarts time I try to put on my computer it won't let me because it goes to the home page and comes up with a message with different types of BSOD errors and then force, then whenever the computer load it keeps then me on reviews and it never let's me back to my original account and I need a way of doing things to normal or if someone can tell me how to reset the computer that would also be very useful.

  Original title: my computer problems

  Hey Nasir,

  I understand that your computer gives error BSOD and your user account is signing you as a guest user and you also want to know about reset.

  Sorry to hear about the embarrassment caused and thank you for the detailed description.

  To help you better please answer the following questions:

  1. What is the brand of computer?
  2. You have a third-party security program installed on the computer?
  3. You recently made any changes to the computer?

  This issue could be due to the following issues:

  • Drivers are corrupt.
  • Damaged user account.
  • Problems of virus and malware.

  Learn more about BSOD please refer to the article:

  http://answers.Microsoft.com/en-us/Windows/wiki/windows_other-system/blue-screen-of-death-BSOD/1939df35-283f-4830-A4DD-e95ee5d8669d

  Follow the suggestions below and check if this can help:

  Method 1: Safe Mode

  Follow the bottom of the article which will help you to start the computer in safe mode and check if it works fine in safe mode:

  http://Windows.Microsoft.com/en-us/Windows-8/Windows-startup-settings-safe-mode

  Search your computer in safe mode, all the third-party program installed on the computer are disabled in this mode.

  Method 2: steps can be followed to BSOD

  This article will help you solve the BSOD errors on the computer:

  http://Windows.Microsoft.com/en-us/Windows-8/resolve-Windows-blue-screen-errors

  System Restore warning: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  How to reset the computer

  Please follow the article below and this will give you the procedure step by step to start the reset of the computer:

  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

  Refer to: refresh your PC without affecting your files.

  Hope this information helps. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• How to deepen the full administrative rights for my Windows 7 Home Premium?

  I need to have full administration rights to install the software for my home work.  How can I change of partial administrative rights to complete administrative rights?

  Here are your options:

  • Right-click the Setup program, and then click "run as administrator.
  • Turn off UAC (not recommended).

• How to deepen administrator rights on my computer?

  I am running Windows Vista 32 bit on my laptop, and I have problems with file permissions.  I'm trying to change the contents of my file in Windows32 and Vista won't let me access the files there.  I have to do this action in order to save my laptop, but he repeats to me I need administrator rights to perform this action.  I don't have a single account on my laptop, so why can't access these files?  I tried to change the preferences, but words and check boxes are always gray and I can click on them to change them.  How can I access these files?

  Hi Jason,
  Before you do a clean install, I recommend you run a SFC scan, this may fix the corrupted files (not always). Give it a try, if this doesn't help, you will need to do a repair/cleaning facility.

  Let us know if you need additional assistance.

  Thanks, Martin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• How to finish my defrag and how to lock the computer

  I have a windows xp with vista netbook.  How to make chkdsk /f to run.  How to defragment to finish.  What are the mpf files.  It says I have fragemendted

  How safe boot that.  Also, I don't have my net number of the computer.  How to download c ++ for free when I could do it before.  Also, what is

  a good setting for security.  Harry

  Unfortunately, both a chkdsk (check disk) and Defrag are high level utility that correct problems with the file system.

  most importantly, windows you cannot defragment if 1) there is no free space on the disk and 2) if the file system is dirty.

  so if you're stuck with an incomplete defragmentation, it's a serious problem.

  If, however, you have not been able to run a defragmentation because you run a check disk (chkdsk), then you're ok for now.

  to run a disk check, open windows Explorer / my computer.

  then right-click on the drive letter, select Properties, then go to the Tools tab and then to initialize the control disc function.

  by the way, don't know why you want to c ++.   Remember that you have a netbook with limited resources and not a full blown computer.  I would Setup not all that kind of public services on the small machine of high-level programming.

  Finally, you can get information on your netbook by looking at the sticker or label on it or by running a utility that gives you information on your machine.

  It is important for you to know the number of brand and model of your machine because there is a lot of information, how to, faq, patches and updates to their homesite.

• How to turn the computer back at the office after sleep?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: this is the 1 time I use the function slee...

  • I don't know how to get back on the desktop after using sleep.i cannot find any button to return, as seen as running off.whay should I do...
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  Usually just move the mouse or using the keyboard wake it.

  1 I want to erase the General corruption and repair/replace damaged/missing system files:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------

  Check the settings (BIOS/CMOS) that you can start and ensure that this suite of lan, Wake on modem and
  similar are not enabled.

  Shoot sleep problems - hibernation
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to solve a problem of Mode for Vista and find a Solution
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  http://support.Microsoft.com/kb/950686

  Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
  and other devices. (Double click on the device and the power management tab)

  All the default power plans and then set them as you wish.

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• How can I me administrator rights so I can download on my computer?

  When I am trying to download Photoshop etc on my computer, I get a note thah I have no rights administartion.

  Make sure that you had connected to the computer as an administrator.  If you had connected to the computer with the Admin account and still get error message.

  If the Windows computer, to the right, click on configuration file and select " run as administrator".

  If the computer is connected to the managed network, contact your IT Department, they can provide you with administrator privileges to install the application.

  For additional assistance, please provide details below

  Operating system and its version. [Windows or Mac}

  Personal computer or desktop / network management?

• How to set the computer name and domain name

  I try to install R12.1.1 EBS on windows server 2003
  I'm in following the
  Thread: Oracle E-Business Suite R12 Installation on Windows 2003
  
  
  to write hswaan in step 2
  
  (2) set "ComputerName" and "Domain Name".
  
  How can I set the computer name and domain name in my windows 2003
  Please send me the steps to do
  
  respect of
  Noman

  Hello

  It is already mentioned in the same thread.

  -Right click on "My computer" > properties > "ComputerName" > change
  -The value "name of the computer.
  -Click on more
  -The value "This computer's primary DNS suffix"

  Steps for installing Oracle E-Business Suite R12 on Windows XP
  Steps for installing Oracle E-Business Suite R12 on Windows XP

  Kind regards
  Hussein

• How to get the computer to boot from a USB?

  I use offline windows Defender. Start the computer to the USB you need. How can I get the computer set up to do this?

  my computer is a HP Pavilion e9100z.

  Thanks for any help

  Hello

  We will determine if your PC can not even boot from USB devices.  Plug the USB and turn on your PC.  When you get to the HP splash screen, then start typing the escape key to bring up a boot selection menu. If you do not see the USB device then your PC can't boot from a USB device.

  If your PC does support booting from a USB device and then read this MS post article.

  You always have the option to start Windows Defender from a CD or a DVD.

• How to make the computer to recognize that there are 2 monitors?

  I have a new hp pavilion hpe h8-1124 with AMD Radeon HD 6570 GPU.  It does not have a VGA port, so I used the adapter supplied in the box HP (DVI / VGA).  To get to two monitors, I used a VGA 2 VGA splitter 'Y '.  Both monitors turn on and show the desktop, but when I use the Windows screen resolution (7 professionals), to stretch my office, the choice of two screens are not present.  Using the button detection detects only a single monitor which is names @.  Using 'Identify' places '1' in each monitor.  When that I start with a single monitor, "detect" correctly identifies appointed monitors.

  How can I get the computer to recognize the fact that there are two different monitors?  If I can't do this, I can't do the rest of what I need to stretch the desktop on two monitors.

  Hello

  Get rid of the VGA splitter.  You have noticed it doesn't work for the Office of 'cloning', but do not stretch across two monitors.

  What are the other ports on the video card?  without doubt, DVI, HDMI, and VGA if this is correct, then one of then one of the monitors must use DVI - D or HDMI if you want to continue to use the VGA for the other monitor.

• How to analysis the computer to my HP 8500 A909g to my MacBook Pro

  I have a MacBook Pro running 10.8.4. I can't have the scanning to the function of the computer to work. I downloaded the latest drivers from Apple for Mountain Lion. I uninstalled and reinstalled the printers so that rerun the configuration utilities. How to solve this problem?

  Hello

  Don't forget to scan by using one of the methods below, scan from the front panel is not supported on Mountain Lion:

  http://support.HP.com/us-en/document/c03550518

  Please let me know if this work, otherwise don't forget to run the software update from the Apple menu and try to scan the image.

  If there is a mistake, don't forget to specify the exact error or behavior message, as well as the type of connection continued.

  Shlomi