How to defragment and uninstall programs in Mode safe?
Normal startup goes to a blank screen, need to do a hard closed down and restart in MOde safe mode with networking... I guess there is a problem with a file on some prgram of startup... I want to defrag and uninstall some programs to hopefully get rid of the problem, but I am unable to do either Mode safe... any suggestions?
Hello
1. don't you make changes to your computer?
2. What happen exactly when you try to go to safe mode?
I suggest you to follow the methods and check.
Method 01:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
Tags: Windows
Similar Questions
-
How to remove MS Security Essentials in Mode safe
Yesterday, I installed Microsoft Security Essentials and when to start this morning am BSOD, can only now start in Safe Mode, but the uninstall program cannot run in Safe Mode, how to remove MS Security Essentials in Mode safe?
Or if I can't remove it in Safe Mode, maybe how to disable the running program, it seems to work even in Safe Mode?
To turn off:
Open Microsoft Security Essentials | Settings | On the left, Select real-time Protection . In the right pane, uncheck enable real-time Protection . Save the changes Microsoft® Security MVP, 2004-2009
-
need to know how to fix the windows\system32\rundll32.exe to be able to go to add remove programs and other options in the Panel
From the other thread:
old question, new question so what I do or how to set or return rundll.exe in my computer?
old question question/new - matter always request how to fix or recover from the windows/system32/rnudll.exe in computer science. I see no other answer to this anywhere
Hi DadVQ,
· Did you do changes on the computer before the show?
This problem occurs because of a missing or corrupted Rundll32.exe file. This problem can also be caused by a virus.
Follow the suggestions below for a possible solution:
Method 1: Follow the steps mentioned in the article below and check if the problem still persists.
Cannot find the Rundll32.exe file when you open Control Panel
http://support.Microsoft.com/kb/812340
Method 2: If the problem persists, I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.
The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
Important: While hard disk analysis if bad sectors are found when scanning try to repair this area, all available on which data can be lost.
Let us know if that helps.
-
Here's the question. Recently, I've been hit with malware any who try to act as a protection program. XP Security 2010 I think, this is how it's called. I have finally come down and get to run in normal mode, but when I try to do anything, including the internet, he asks me what he wants me to open with (providing a nice list of ol ' of programs such as photoshop, illustrator, etc.)
I can't run anything, I can't go in safe mode, nothing. Help would be loved.
Hello
Use above message for intense and thorough check for malware.
To restore the ability to run any .exe programs.
1 make a Restore Point so that you can come back if necessary back although probably not required.
How to create a Vista System Restore Point
http://www.Vistax64.com/tutorials/76332-system-restore-point-create.htmlHow to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
2. copy BETWEEN these lines and paste it into Notepad - save as exefileFix.reg - then right
Click on it and FUSION - REBOOTDO NOT COPY THE LINES
-----------------------------------------------------------------Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\. [EXE]
@= "exefile".
"Content Type"="application/x-msdownload".[HKEY_CLASSES_ROOT\. EXE\PersistentHandler]
@= "{098f2470-bae0-11cd-b579-08002b30bfeb}".[HKEY_CLASSES_ROOT\exefile]
@= "Application".
"EditFlags" = hex: 38, 07, 00, 00
"FriendlyTypeName" = hex (2): 40, 00, 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52,------.
00, 6f, 00, 6f, 00, 74, 00, 25, 00, 5 c, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 33, 00,------.
32,00, 5 c, 00, 73, 00, 68, 00, 65, 00, 6 c, 00, 6 c, 00, 33, 00, 32, 00, 2nd, 00, 64, 00, 6 c, 00, 6 c,
00, 2 c, 00, 2d, 00, 31, 00, 30, 00, 00, 31, 35, 00, 36, 00, 00, 00[HKEY_CLASSES_ROOT\exefile\DefaultIcon]
@="%1"[HKEY_CLASSES_ROOT\exefile\shell]
[HKEY_CLASSES_ROOT\exefile\shell\open]
"EditFlags" = hex: 00, 00, 00, 00[HKEY_CLASSES_ROOT\exefile\shell\open\command]
@="\"%1\" %*"
""IsolatedCommand"="\"%1\" %. "[HKEY_CLASSES_ROOT\exefile\shell\runas]
[HKEY_CLASSES_ROOT\exefile\shell\runas\command]
@="\"%1\" %*"
""IsolatedCommand"="\"%1\" %. "[HKEY_CLASSES_ROOT\exefile\shellex]
[HKEY_CLASSES_ROOT\exefile\shellex\DropHandler]
@= "{86C86720-42A0-1069-A2E8-08002B30309D}".[- HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.exe\UserChoice]
--------------------------------------------------------------
DO NOT COPY THE LINESIf necessary:
Check the fix of exe here
http://www.Winhelponline.com/articles/105/1/file-association-fixes-for-Windows-Vista.htmlAlso check this one if it applies
http://www.Winhelponline.com/articles/165/1/restore-the-exe-file-association-in-Windows-Vista-after-incorrectly-associating-it-with-another-application.htmlHow to set default Associations for a program under Vista
http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.htmlI hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
How to clean and uninstall the undesirables?
My mac is really slow. What basic things how do I clean? I installed mackeeper and arbrealettres, they do everything until they want me to pay $$ what can I for free and how to do one install these two?
Thank you
Installation of those is probably the worst thing you could have done!
Do not install MacKeeper (and how to uninstall if you have):
https://discussions.Apple.com/docs/doc-6221
It contains a major security flaw, that recently noted:
There is currently a class action against MacKeeper:
(Please note that the original developers, Zeobit, now refers to the Kromtech Alliance Corp., which acquired MacKeeper and ZeoBit LLC PCKeeper early 2013.)
Ditto for arbrealettres - get rid of it. Never install such a third-party utility.
What about the slow-running, how much free space if left on your hard disk, and the amount of RAM you have?
-
I am unable to complete and uninstalled program which is not desired
I have install frostwire and there was like (ask browser) that have been installed but it said you could uninstall this program but I decided that Frost wire is a program that is not desired until I can get other programs to help!
Hello
ask in the forums of frostwire on the link below
_____________________________________
You can also try the free Revouninstaller
http://www.revouninstaller.com/revo_uninstaller_free_download.html
-
How to reinstall an uninstalled program.
Hello
I lived a few glitches in Photoshop CS5 recently so I decided to uninstall it and reinstall, thinking that it would solve my problems of glitch. Unfortunately, I'm not able to reload the software. Are there some that I can recover my program? I use it almost every day.
For CS5, here's the Photoshop Installer. CS5 download products
Just as your serial number ready and manually install the updates of your products: updates
Gene
-
How to disable and uninstall my old mac photoshop and put it on the new?
So I've fried my old Macbook Pro, got a new. I had adobe photoshop cs6 on the old laptop, but there are now on the new. How do I do that?
Download and install it and use the original serial number to activate it.
CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html
If the old installation is inaccessible and you never disabled it can contact the Adobe Support via chat and ask them to reset your activations.
To the link below, click on the still need help? the option in the blue box below and choose the option to chat...
Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache. If it fails to connect, try to use another browser.Serial number and activation support (non - CC) chat
http://helpx.Adobe.com/x-productkb/global/Service1.html ( http://adobe.ly/1aYjbSC ) -
How to disable and uninstall PSE 8?
I had a hard drive problem, so my PES * installation point is not the same now that it is during the initial installation. Also, I tried to use it on an old laptop which is no longer available for me. I suspect that my current installation is now regarded as the 3rd and I can not turn off.
I have PES 9 and 11 PES installed and works very well, I want to free up space and remove PSE 8.
Any advice?
Kind regards
Pete
Please follow this link to manually remove PSE8 in your system: http://kb2.adobe.com/cps/826/cpsid_82673.html
~ Andromeda
-
I need of more memory, I can't afford to buy it, how to remove stuff to create more memory and how do I know what programs are ok to remove
I think you're confusing terms and certainly confuse us.
RAM/memory (they are identical) is the memory on the computer that is used by programs running as a temporary store for data. How to reduce the amount of memory used is to close unnecessary programs or does not work as much. for example close the browser and your e-mail so that the execution of Word program. You do not need to uninstall programs, run just not, to save memory.
IF you talk about not having enough disk space to store your programs and data, then the way to increase the free space on the disc IS to uninstall unnecessary programs - only you can decide what programs you don't need. One way to increase disk space is to make sure you have emptied your Recycle Bin to delete the old data files, you don't want to, and uninstall programs.
You need to tell us exactly what error messages you get so that we can determine what your problem is.
-
A few days ago I had some problems playing Halo 2. The program itself has suggested that I have reinstall. So, I uninstalled Halo 2 without incident. However, during my attempt to reinstall Halo 2, I received the following Message: redists\vcredist, msi: the Windows Installer Service could not be accessed. This can occur if Windows Installer is not correctly. Contact your support team. Click Retry to try to complete the step failed, or click Cancel to cancel the installation.
An error occurred when copying files in the background. An unexpected error has occurred while the application was copy files to your computer. Please try to reinstall the game, or contact customer support if that does not solve the problem.After contact with the teams of tech games Halo wasn't any help, solution phone a 1-888-xxx-xxxx, a refund of my game. I am bypassing the conversation that happened because the individual basically blew me off the coast. Run the verification tool file system, basically said that I had a corrupted file, and you run the recovery tool. I did this, but without success. I tried to research on issues such as the best of what I know how, only to discover that I need to use the Setup Windows Vista Home Premium CD/DVD. This is another problem. When my wife bought this laptop, she received only a couple of recovery disks. So with my limited resources, I'm in this river with pots of Earth on one side and on the other hippos and and a thumb in a plum for a paddle.I am in great need of a useful solution.Thank you...Hi Jimmie,
Given that you are facing problem installing Halo 2 and receives Windows Installer errors, to start with, you can try the following steps and check if it helps.
Method 1:
Try running the fixit provided in the following article and check.
Diagnose and solve the program installation and uninstallation problems automatically
Method 2:
You can also try the steps in the following article and check if it helps.
Problems installing and uninstalling programs on Windows computers
-
cannot uninstall program vgrabber
I installed this program is called vgrabber and it allows me to uninstall has 3 different parts to him please help me with a solution
Hello
1. how exactly have you tried to uninstall the program Vgrabber?
2. what exactly happens when you try to uninstall the program?
3. you receive an error message when uninstalling the program?
4. are you able to uninstall or install other programs?
Please provide more information on the issue so that we can better help you.
In the meantime, you can try the methods provided below and check if the problem persists.
Method 1:
The issue may be related to spy/Virus software, I suggest that you download and run a full scan of the system using the Microsoft Safety Scanner and then try to uninstall the program.
Visit the link below to download the Microsoft Safety Scanner.
Microsoft safety scanner
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note:
The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
Method 2:
Try to start the computer in a clean boot state, and then try to uninstall the program.
Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note:
After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
See also:
Problems installing and uninstalling programs on Windows computers
http://support.Microsoft.com/kb/2438651
-
I have problems with my hard drive. I got a notification saying that my hard disk space became full. So I cleaned a lot of programs and files of the irrational. I've freed almost half of it. Then I had another notification a few days later and realized that I had less than 1 GB of free space on my hard drive 600 g. I cleaned more and went to defragment my disk. It is set on a calendar, but I don't think that he has never been defragmented. He ran for about 2.5 days until the cord is unplugged and the battery is dead at 91% consolidated. Do I have to start again and wait again 2.5 days before I little hard drive space open? Or progress in the early days of 2.5 will remain défragmentée? In addition, defrag and do a disk cleanup will stop my hard drive to fill almost instantly after deleting and uninstalling programs? I'm running out of things to remove and I am a full-time student full and really need a computer in operation, please help!
Defragmentation is complete, will continue from the left point last time. Therefore, if you raise, he will continue that 91 percent (of course, it will start from 0%, but the scan will go up that 91% and continue with the rest of the space on the hard disk, that 91% of surface of the hard drive has been defragmented already).
Yes, you can delete all the files inside the Temp folder. TEMP folder is a temporary storage place used by some programs to temporarily store the files/folders. Some programs remove the files/folders after working, but some retain them, causing space problems.
You can use disk cleanup, on occasion, to delete unnecessary files from the hard drive.
-
cannot remove programs in ad and remove programs
my computer does not allow me to remove programs in add it and remove program section
Hello
- What happens when you try to uninstall it?
- You receive an error message?
- This happens with all programs?
- What were the changes made before the problem occurred?
You can check this link:
Problems installing and uninstalling programs on Windows computers
-
On my Gateway PC, it won't allow me to install or uninstall programs.
He argues that there is an installed program and at the end that before I install another. It does not exist! I tried everything and I can't even uninstall programs that can cause... Help!
Hello
- What is you receive the exact error message?
- What were the changes made before the show?
You can check this link:
Problems installing and uninstalling programs on Windows computers
Maybe you are looking for
-
How can I add names to an existing list of email?
I would add the newest additions to my address book email lists that I used for a few years. I used to be able to do, but with all the updates, I think that Thunderbird has forgotten how.
-
iPhone 5 unusable once 9.3.2 update - Apple says that 'buy new '.
I have updated the iPhone to my daughter 5 9.3.1 to 9.3.2 using the cable of the lightning to Mac/iTunes method with the full downloaded update. The update failed on several occasions ("error (50)") so I chose the option to restore the phone. The res
-
Norma 4000 waveform measurement
Hello I have 4000 Norma connected via rs232 and I want to get the waveform of voltage in labview. Something like DSO. I can do this in NORMA View (which is developed in labview), but when I try to do in labview with lnopa01 v09 pilots it doesent work
-
The batteries are new, as is the keyboard. The keyboard is also erratic, as sometimesit is sensitive and sometimes painfully slow.
-
How do I uninstall direct family of microsoft on my xp jeanmarie
try to install the trend internet security keep getting message not compatible