HP Elitebook 8560p touchpad click right questions

Similar Questions

• Satellite U920t-102 touchpad click right question

  Hello

  I have a new U920t-102, which I am very happy with, but I have a problem with a right-click of the mouse pad (which means the 'button', the user is able to support on the lower side of the mouse pad): sometimes it actually works like a right click, sometimes it works as a left click.
  It's embarrassing, especially during web browsing: I used to do a right-click on the links and open in a new tab, but when the right click actions left or right-handed, I lose the current web page.

  I tried to understand what depends on this behavior, by looking at the synaptic animated icon on taskbar windows while playing with the left and right click. If I continuously press the button to right click on the mouse pad, after a few rehearsals, he will be consistely and working properly as a right-click, but if press left click once or several times, the right click button works as a left click for certain pressures and "corrects" himself and start again to work properly.

  Any idea or suggestion? is this a hardware problem?

  Marco

  Usually the touchpad right click / left can be configured in the settings of Synaptics.
  Right click on Synaptics icon on bar tasks and then tap properties of devices.
  In buttons tab that you will be able to choose system or right- or left-handed.
  Here, you may choose a plan suitable for you.

  You can also try uninstalling the driver for the Synaptics touchpad and may test the functionality of touchpad without the use of additional touchpad software.

  But if it does not help, your forces have hardware problem

• Touchpad - click right does not

  On my Sony Vaio, the touchpad 'right click' installation does not work, can you please help?

  Hello

  Could be a hardware problem with the touch pad.

  Check the Sony Support, their drivers and documentation online and ask questions in the forums on
  known problems.

  Sony - Contacts
  http://eSupport.Sony.com/us/Perl/contact-land.pl

  Sony - drivers
  http://eSupport.Sony.com/Perl/select-System.pl

  Sony - Support
  http://eSupport.Sony.com/

  Sony - Forum
  https://Forum.sel.Sony.com/?XID=M:Showcase:eSupport

  =============================================================

  Check with the manufacturer of system support, documentation in line, or forums as there probably
  are shortcut keys that enable and disable the touchpad functions.

  Parameters for TouchPad located in the control panel - mouse (there may be several tabs with TouchPad
  entries) and some have a utility that loads in the Notification area next to the clock in the bottom right.

  ==========================================================

  If necessary: (make sure that you have restarted at least once, if the above did not work)

  Panel of configuration-Device Manager - mice and pointing devices - Double click on the TouchPad
  -Pilot Tab - click on Update Driver (which is may not make anything as long as MS is far behind)
  drivers of certification), now RIGHT CLICK on the touchpad and UNINSTALL.

  Then go to the USB and UNINSTALL ALL controllers except the category itself
  (all in it). RESET

  This will refresh the driver for the TouchPad and battery USB. This does not prevent the touchpad
  of work.

  Here are the similar steps in XP, Windows 8, Windows 7 and Vista is the same, except
  We need clear the specific device if present.
  http://support.Microsoft.com/kb/310575

  Then go to the system manufacturer's website and get the latest touchpad drivers.

  Download - SAVE - go to where you put it-click on - RUN AS ADMIN.

  =================================

  This utility also allows to control the TouchPad:

  TouchFreeze
  http://code.Google.com/p/TouchFreeze/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• HP Elitebook 8560p: 10 Windows drivers for HP Elitebook 8560p

  Hello

  I have a laptop HP EliteBook 8560p, and I run a clean installation of Windows Professional 10 64-bit on it. I want to ask you if you plan to deploy the drivers for Windows 10 because the CPU usage is too high, probably due to no updated drivers.

  Thank you.

  Please visit the following link:

  http://catalog.update.Microsoft.com/v7/site/home.aspx

  Accept to install the cab file.

  Search for 'VEN_8086 & DEV_1502'... and click Add drivers listed for Windows 10

  then search for "VEN_8086 & DEV_1C3D" and click Add drivers listed for Windows 10

  In the upper right corner, click on view cart

  Click on download, once downloaded, try to install the drivers.

• HP elitebook 8560p: HP elitebook 8560p drivers to win 10

  Hi HP support team.
  I have the hp elitebook 8560p, but I found no drivers for windows 8.1 and windows 10.
  The main problem is that the video of this machine played poorly, too much restriction are occurred in this model... Can you help me to download official windows 8.1 and 10 pilots.
  Thank you

  Can be found on the HP EliteBook Notebook PC - drivers & software page 8560pofficial HP drivers for your computer. HP is provide drivers for Windows XP, Vista, 7, 8 and 8.1. Official HP drivers for Windows 10 not available currently.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• HP EliteBook 8560p: HP EliteBook 8560p BIOS update F.63

  Problem with the HP EliteBook 8560p with Bios Update to F.63 RevA. After the download and installation failed message:

  The file system (C:\SWSetup\SP76205\ROM. CAB) BIOS update is missing or damaged. THE system BIOS does not update.

  How to solve this problem?

  First: download and try to install the Bios update F.63, it will fail - don't worry.

  Second: to check what type of the ROMA family and ROM date do you have, press F10 on the laptop at the start run the configuration utility and then view the file system information.  You should see: 68SCF or 68SCE, double check and write it on paper.

  Third: Start computer laptop back to Windows

  -go to C:\SWSetup\SP76206 and rename 68SCF or 68SCE in ROM (a single file if you aren't sure go to step: second)

  -go to C:\SWSetup\SP76206\hpqflash and rename 68SCF or 68SCE in ROM     (a single file if you aren't sure go to step: second)

  Finally:

  go to C:\SWSetup\SP76206 and do a HPQFlash right-click and run as administrator

  or

  go to C:\SWSetup\SP76206\hpqflash and do a HPQFlash right-click and run as administrator

  To sit and watch, do not touch your laptop up to the moment where you see Windows login.

• Windows 7 click right isn't display options or copy & paste etc.

  I noticed that the right click worked earlier, I checked all the settings, but could not find the problem. I tried to do a basic restore but my computer crashed after the restoration. I ended up doing a full restore and strangley click right still doesn't work! Help please!

  [Moved from comments]

  Hi SarahIngham,

  Check if the problem persists when you use another mouse. Also update the touchpad drivers by visiting the manufacturer's Web site.

  I suggest you to check if you are facing the same question in the new administrator account.

  Create a new user account-
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  If you are not faced with the same question in a new user account, you can view the link below and use the steps provided to fix a corrupted - user profile
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  It will be useful.

• HP EliteBook 8560p: can not turn on WiFi: the button is orange, and nothing happens when you press

  Hello

  I have a problem with my wifi. The button always orange and nothing happens when I press on it: no errors, no message, no reaction at all. This is why I can't use WiFi.

  The laptop is a little new: I use only 2 months.

  1. number and product name

  HP EliteBook 8560p
  НР LQ589AW

  2 operating system installed (if applicable)

  Windows 7 Professional 64 bit

  3. error message (if any)

  No error message

  4. all changes made to your system until the problem occurred

  My windows crashed and I got it from archive created a few days ago. Archive includes all data from hard drives, the system has been restored exactly as it was before the accident. I still don't know if this caused the problem (or if the problem occurred after that): it happened a month ago, and I had no WiFi available at the time and only tried to turn it on a few days ago.

  Additional details:

  In device manager wireless card is appearing as functioning normally. In the management of the adapter Wi - Fi is on but says "no connection available. If I run diagnostic tests, he asks me to activate WIFI with a button on my laptop, which I can't do. In Mobility Center, it says "connection Wi - Fi is turned off". Activate the button is gray and impossible to click on.

  I already tried things:

  1. Reinstalled all the HP drivers from original CD.
  2. Card WiFi removed in the windows Device Manager (remove device), restarted windows, installed new drivers for it, rebooted again;
  3. Checked the mobility Center as suggested in one of the threads available on this forum;
  4. Do a hard reset for HP laptop (battery removed, push the button and hold for a minute).

  Thanks for any help!

  Anatoliy.

  I managed to solve the problem...

  Turns out that the problem was (apparently) caused by HP Power Assistant tool shipped with my laptop. Default profile has been showing the gray bluetooth and WiFi, and it was not possible to turn them on. I created a new profile, and even if all the parameters are identical to the default profile, it allows me to turn the BT and WiFi and turn off without any problems. Button is working fine now as well and goes from blue to orange when I press it. Active WiFi and it works.

  I hope this helps.

• 14:Two yoga made 3 finger tap a click right does not work, no way to disable the Tracker for palm

  I have recently buy Lenovo Yoga 3 14 inches and have found that I cannot disable followed two palm or use two fingers click right tap function.

  I went in the mouse settings but still no help, it is said that tap two fingers is enabled but does not work, all other touchpad gestures work perfectly. I currently have the driver version: ELAN Touchpad 11.4.54.1_x64

  If it's any help, the virtual mouse device of Lenovo also has the version of the driver 14.20.52.752

  I already checked the MOMENTUM without result and also parameters of lenovo found in Program Files/Elantech. They both contain palm Tracker settings, but they are put at least still do not clear up my problem.

  If I can't fix the two finger tap or palm Tracker option that I plan to take my back just Lenovo for the hassle it caused.

  I did my research but still no results found. Help, please!

  That help me:

  I have the solution:

  Run regedit

  HKEY_curreent_user/elantech smartpad /software/.
  Tap_two_fingers value 1
  Tap_two_fingers_enable value 1

  Reboot and then you can use 2 fingers to the right click

• EliteBook 8560p: which driver for this "unknow device" / ACPI\HPQ0004\3 &amp; B1BFB68 &amp; 0

  I have a HP EliteBook 8560p which was under Windows 7 in the past...

  And it was now migrate by "microsoft" for Windows 10... Grrr.

  When I check in the control panel to manage the drivers I see that is missing a driver:

  Unknow, ID = ACPI\HPQ0004\3 & B1BFB68 & 0

  Someone has an idea to find the right driver for Windows 10 and what is the device that is missing?

  Thank you very much.

  Best regards

  Turbo

  Check out This THREAD and look at the post of Paul.  This device is listed as HP ProtectSmart Hard Drive Protection software and it shows the download of the driver software.

• EliteBook 8560p: HP EliteBook 8560p - Bios - Virtualisierung briefly

  Hello

  I want to enable VT - x (virtualization) in the BIOS but I can't find where.

  The BIOS is very opaque and there is only the option ' Show/change/hide' for virtualization, and it's a mystery, where 'show' or his status to wich-wich 'change '.

  Hallo,

  ICH möchte VT - x (Virtualisierung) im Bios briefly, aber ich finde nicht, wo.

  There are BIOS of das ist sehr opaque, und gibt sleeps nur die possibilities "Show/change/Ausblenden" Virtualisierung, und're ist ein motto, wo 'ads' oder von welchem Zustand zu welchem "change."

  Hello

  I found the answer on the internet:

  http://h30434.www3.HP.com/T5/business-notebooks/how-can-I-enable-VT-x-in-EliteBook-8560p/TD-p/1246565/page/3

  It's necessary to set a Bios administrator password (when starting: ESC / F10 to enter the bios). Then, it is possible to turn on virtualization.

  My other problem is to disable the touchpad. It worked after I installed the drivers for the touchpad.

  ###############################################################################

  Hallo,

  Fand ich die Antwort im Internet:

  http://h30434.www3.HP.com/T5/business-notebooks/how-can-I-enable-VT-x-in-EliteBook-8560p/TD-p/1246565/page/3

  Es ist ein einzurichten Bios-password required (while the bootens ESC / ins um zu im Bios F10).

  So ist are possible, die Virtualisierung einzuschalten.

  Mein great war problem die Abschaltung of the Touch - Pad. Dies dirty nach der Touch Pad Driver Installation.

  Gruss Tilmann

• HP Elitebook 8560p: Windows 10: Elitebook 8560p; WiFi button is not working, Wifi - and internal 3G modem does not work

  Mobile: HP Elitebook 8560p
  Bios: 68SCF worm. F.6.1
  Modem: AGERA Systems HDA Modem
  HP hs2340 HSPA + Mobile
  Network: Intel (R) (R) Centrino Advanced - N 6205
  Intel (R) 82579LM Gigabit Network Connection

  OS: Windows 10.0 (build 10240)

  I've updated HP Elitebook 8560p of Windows7 (64-bit) for Windows 10. The upgrade process was successful. Later, I noticed, Wifi and 3 G-internal modem does not work. Sametime, I noticed, that old HP Connection Manager has been uninstalled (or lost?).

  The problem is basically this: Wifi - and connections 3G internal modem does not work. I noticed, that wifi-button has "orange" color and the button does not work? I can't change the Wifi status parameters at the level of the OS of Off to On. That's why assume that the wifi module is on "off"-"State. I found the driver SP7107 (driver Wifi for Windows 10 button) package and I tried to install it. The installion failed because InstallDriver_64, location failed. (In Finnish language. Toiminto InstallDriver_64, may c:\...\WirelessbuttonDriver.inf' / installdrv/force). Is there an instruction manual to install the driver?

  I'm very confused and I don't know really, what is the first cause of the wifi - 3 g-modem internal questions and. I guess, this wifi button is not about root work.

  Can someone clarify why there are not more HP Connection Manager on Windows 10 and I tried to install, but install cancelled due to bad BONES. How can I manage wifi - and States of modem 3g without it?

  If anyone can help?

  A big thank you!

  Sip2sip

  Uninstall the access key and button wireless driver

  Reset

  Open Device Manager, run the dirver update

  shouldn't this go

  Download Connection Manager

  FTP://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66235.exe

  Install the program in Compatibility Mode in Windows 7

• Driver ACPI\HPQ0004 on laptop HP Elitebook 8560p

  Hi all

  I have a unknown hit-and-run driver ACPI\HPQ0004 I need fixed. Model laptop is HP Elitebook 8560p

  Forums to search the solution seems to be to download HP 3D drive guard. However, it is already installed and the problem still persists.

  Can someone point me in the right direction?

  Hello:

  I would try to manually install the driver because he is the driver you need...

• EliteBook 8560p - LG736EA #ABB: Elitebook 8560 p - no display + external monitor image at boot

  EliteBook 8560p, product number: LG736EA #ABB, out of warranty.

  I got 2 or 3 times in the past year, when the behavior was the same, but he dissapeard after a few minutes/hours.

  This morning once again:

  -When the startup everything works fine (I hear Windows startup sound) but no image appears on the computer screen or even on HDMI TV ("No signal" appears on the TV, it worked fine before).

  I tried a few suggestions as remove the battery + by pressing the power button for 30 seconds to reset-no luck online.

  I'm looking forward to see if it will work in the evening, but until now I need some advice:

  -would it be by a faulty inverter?

  -other opportunities outside the UPS?

  -What is the part number for the converter to display? link? I can't find it on http://partsurfer.hp.com...LG736EA but maybe my eyes were Misty :-)

  -J' have some assambling/desassambling experience, I guess I can DIY replacement of the ups, right? :-)

  All ideas are welcome :-)

  Thank you with respect.

  Hello

  computer science is not an exact science

  You have experience of course! But it is assumed that Service Center have more resources (pieces of overlap).

  The best solution in my opinion is the best solution.

  Of course will be better request a quote.

  Concerning

• Laptop Acer click right switch inoperable

  My wife has a new Acer laptop running Windows 7.

  The laptop integrated into 'left click' 'right click' switch under the touchpad is not working.

  Is there a setting somewhere to toggle this function that little fingers can be tampered with?

  Click on the Start button in the taskbar and click on Control Panel.

  Click the mouse

  

  To review some of the settings and if you notice there is a button on the lower left side by default,