How to deploy multiple domain internal IM

Similar Questions

• How to point multiple domain names on the published site?

  That may seem like a stupid question to some, but I'm a designer, not a web developer.

  I built a site using Muse, and it's recent concert at the familiesontheoutside.org. (No, I'm not trolling for traffic; I really need orientation.)

  My client purchased a long list of names of domain, all to be directed to the same site. However, I recently read something about statscrop.com on "canonical URL". I apparently don't have a high enough geek of note for much of the meaning of this, but I'm willing to learn...

  Is establishing a canonical URL SAME as just going to my client's domain provider and selecting all the areas that they bought the same DNS numbers?

  If not, then please tell me the best way to get all the same site pointed domain names, and I will try to understand the canonical URL another time.

  Thanks for any help.

  Hi Mate

  Remember all the NAME SERVERS on the Web site. Then add all the areas on the site so the DNS would be internally.

  Then you would use DOMAIN REDIRECTED to point all domains to the default domain.

  If you do this, then this is the best solution.

  See screenshot of how I have this set up on www.prettypollution.com.au > 06.20.2014 - 09.49.38 - BrettStockley library

  Brett Stockley

  Skype = brett.stockley

• How to deploy multiple ESX servers simultaneously?

  Hello

  I have a little - I have to install 6 same ESX 3.5 on 6 servers, blade servers. How can I do simultaneously? Can I use some products like the layout manager of Tivoli to the OS or any same otners deployment?

  or maybe Vmware itself having these tools?

  Best regards

  Ilya

  The message tells you that you will have to edit a file (part of the Web Access) to activate the ability to generate a scripted installation configuration file.

  Here is the doc you are looking for: http://www.vmware.com/pdf/vi3_35/esx_3/r35/vi3_35_25_installation_guide.pdf

  Start looking at page 101 in this document.

  Jase McCarty, VCP, vExpert, VTSP

  http://www.jasemccarty.com

  Co-author of VMware ESX Essentials in the virtual data center

  (ISBN:1420070274) Auerbach

  _{Please consider awarding points if this post was helpful or appropriate}

• The band multiple @domaine used in user name on the integration of commercials with Cisco ISE?

  Hello

  How to remove multiple domain suffixes through ISE with AD user name used as an external identity Source. Username is used in [email protected] / * / format.

  Cisco ISE 1.2 patch introduced 4 Strip prefix or suffix @domaine Kingdom of the username through ISE with AD used as external identity Source. But the documentation is not updated for this feature. I am able to band 1 domain successfully suffix but following conditions listed in the list of suffixes fails to get stripped.

  Any thoughts on the same.

  Thanks Kumar

  In the ISE under Administration > identity management > external identity Sources

  Choose the Active Directory on the left, select your ad server and Advanced settings

  Under identity band of suffix, make sure prefixes band below: is selected (I know, it says prefix).

  In the list of Suffixes box, enter your list of domain suffixes to undress.  The separator character is a comma (,).

  

  If this does not solve your problem, then I fear that a call to TAC may be in order.

  UPDATE *.

  Spaces are significant characters.  The registration of domains, so as such:

  @domain.com, @domain.local, @testdomain.com

  END UPDATE *.

  Please rate useful messages and mark this question as answered if, in fact, does that answer your question.  Otherwise, feel free to post additional questions.

  Charles Moreton

  Post edited by: Charles Moreton

• How to solve an error internal

  Apex 5.0.

  Page 301 is an interactive report based on a join of multiple tables stored as a point of view.

  The link attribute called Page 302, from 3 ID values for the elements of page P302.

  Page 302 is a form of single-row using one of the 3 ID values as a primary key in the source table.

  This is accomplished by a generated, pre-rendered, after the header, Line of SSN_LINKprocess.

  Display only the values of the form are obtained by a second process after the header of pre-rendering,.

  This is a SQL query made by hand using two other ID values as a key compound in a table

  another database using a database link. (The 2nd data base is local, but on another device of DB).

  The call to the Page 302 works gently until we begin to use the filter on the interactive report.

  After filtering the report to a more specific list of people, the first call to the Page 302 will fail with an internal error.

  Back in the browser (Chrome) and retry the link works perfectly.

  Other links in the filtered list even work perfectly.

  But when the filter is removed, the first attempt to make a link to the Page 302 fails with the same internal error.

  Then, back in the browser and retry the link works perfectly.

  What toggles interactive report filter?

  Here's the technical info internal error, which I do not know how to interpret it:

  Internal error

  Contact your administrator for the application.

  Technical information (only visible to developers)

  • is_internal_error: true
  • apex_error_code: APEX. ERROR. INTERNAL
  • Component.type: APEX_APPLICATION_PAGE_REGIONS
  • Component.ID: 2554504249580925
  • error_backtrace: - stack of PL/SQL calls.
  • the line object
  • serial number of handle
  • package body 641 0xd3b3b4e0 APEX_050000.WWV_FLOW_ERROR
  • package body 709 0xd3b3b4e0 APEX_050000.WWV_FLOW_ERROR
  • body of 0xd3b3b4e0 1013 package APEX_050000.WWV_FLOW_ERROR
  • body of 0xd3b3b4e0 1106 package APEX_050000.WWV_FLOW_ERROR
  • 0xc0488c18 body 1749 package APEX_050000.WWV_FLOW_PLUGIN
  • package body 2622 0xc0488c18 APEX_050000.WWV_FLOW_PLUGIN
  • 0xd3a800f0 body 4535 package APEX_050000.WWV_FLOW
  • 0xc093e170 173 APEX_050000.F procedure
  • 0xcc2b4fc0 30 anonymous block

  Continuing to probe without a lot of guidance, the culprit was discovered. To simplify the generic question how to go about debugging and maybe understand package WWV_FLOW obscured, calls I left a piece of the change in the URL. When the checksum (& cs) change, there is also a PLUGIN B2C8 =... argument (64 alphanumeric characters) in the f? parameter p! It is in the position that is delimited by colons for the value of the REQUEST in the call to the page. This is the interactive report acts differently and tries to provide a useless APPLICATION to me. So my pages may not rely on the default substitution parameter and I need to redevelop a method by which the sequence of page 301-302 knows where it comes from. (Sometimes the breadcrumb will be pages 1-301-302 and other times 501-301-302, and there are 2 components of bread crumbs different pages 301 and 302).

  So in this case, the internal error was not disclosed as a bad value of the APPLICATION, but the problem has been identified by searches on parameters and arguments to the/f? p URL. As Microsoft said, "an error occurred."

• Using PowerCLI with Flexclone rapidclone re - deploy multiple servers daily

  Hello

  We currently use vSphere4.1 with SAN NetApp Flexclone Rapidclone installed We have deployed multiple servers with success of a model of Flexclone using rapidclone.

  The servers in question are Windows 2008 RDS servers, which we would like to destroy and recreate on a daily basis.

  We want to make use of the feature to "Redeploy" Flexclone, which will equip the servers and redploy image, but we want to do this on a planning automated nightly.

  There are not many examples on the web on how to do it and with which application.

  I suppose the obvious choice to be PowerCLI, but don't have any idea how to write the script.

  Can anyone provide information on how to go about starting this script, or if there is a record of the tool that will convert mouse movements in vSphere PowerCLI commands. I tried to use Onyx 2.0 but for some reason it produces no output when cloning using "NetApp - implemented service & cloning" in the context menu in vShpere.

  Any help would be much appreciated.

  Kind regards

  New year's Eve.

  I think that this rapidclone does not use methods public vSphere API.

  This probably explains why you don't see nothing in Onyx.

  This rapidclone comes with API and/or the cmdlets?

• How to assign multiple responsibilities of user OBIEE

  Hi all
  
  How to assign multiple user when responsibilities OBIEE integrated with EBS R12.
  
  For example, I XXX_Custom, XXXX_Custom1 responsibilities of user1 in EBS. When I navigate to EBS to OBIEE how to get these two responsibilities. It is currently only a single responsibility.
  
  Thank you
  Srikanth.

  Ensure that EBS GLOBAL security context. User_name is assigned to the: variable system target session USER.

  Also in init block group change cela roles and use SQL in DataSource code change.

  SELECT '' DISTINCT ROLES, RESPONSIBILITY_NAME OF
  FND_USER, FND_USER_RESP_GROUPS, FND_RESPONSIBILITY_VL
  WHERE
  FND_USER.user_id = FND_USER_RESP_GROUPS.user_id
  AND FND_USER_RESP_GROUPS. RESPONSIBILITY_ID = FND_RESPONSIBILITY_VL. RESPONSIBILITY_ID
  AND FND_USER_RESP_GROUPS. RESPONSIBILITY_APPLICATION_ID = FND_RESPONSIBILITY_VL. APPLICATION_ID AND
  FND_USER_RESP_GROUPS. START_DATE< sysdate="">
  (CASE WHEN FND_USER_RESP_GROUPS. End_date IS NULL THEN SYSDATE TO_DATE (FND_USER_RESP_GROUPS.end_Date) to ANOTHER END) > = SYSDATE
  AND FND_USER.user_id = (SELECT USER_ID FROM FND_USER WHERE USER_NAME = ' VALUEOF (NQ_SESSION.) THE USER) ";

  In order to change, just check the initialization of sage online and do not allow caching.

  Save the changes and deploy this RPD, restart OPMN services and you should now see all the responsibilities of the EBS to OBIEE.

  Have you created roles in EM with the same name of responsibility?

  I hope this helps. Pls mark if he does.

  Thank you
  SVS

  Thank you

• How to deploy the JSF 1.2 and 2.0?

  Hello
  
  Probably a very stupid question :-)
  
  I have an installation running Weblogic 10.3.6 and ADF 11.1.2.3. The JSF 1.2 and 2.0 are deployed and active. They both have the name JSF.
  
  I have the similar system where only JSF 1.2 is deployed. Developers want to use JSF 2.0 so I tried to deploy via the administration Console. I get an error because there is already an application with the name of JSF.
  
  If I cancel the JSF 1.2 deployment I can deploy 2.0 with no problems.
  
  This is perfect and everyone is happy, but how to deploy two libraries with the same name? There must be something I don't know.
  
  What about Peter

  Use a different name for the shared libraries.

  The name of the shared library can be configured in the Console of administration or the Middleware\user_projects\domains\base_domain\config\config.xml.

  
  JSF #[email protected]_2-0-2

  
  jsf1 #[email protected]_1-2-0

• Question on how to deploy Oracle Tuxedo JCA adapter

  Hi all:
  I have question on how to deploy the JCA Tuxedo Oracle Weblogic 11g adapter (10.3.3).
  I try to deploy a jar file. But the web application cannot find the JNDI name that defined in the JCA Tuxedo adapter.
  Then I tried to deploy it as a web application. The console can be found this way JNDI name.
  
  However, there was a FAILED Module Exception:
  
  weblogic.application.ModuleException: java.lang.NullPointerException
  at weblogic.connector.deploy.ConnectorModule.prepare(ConnectorModule.java:239)
  Caused by: java.lang.NullPointerException
  at weblogic.connector.external.impl.RAComplianceChecker.hasMatchingConnFactoryInterfaceInRA(RAComplianceChecker.java:668)
  
  Could someone help me on this issue?
  
  Thanks for any information!
  
  ARO
  Dawn

  Dawn,

  You must use the RAR file. (a file with the extension 'rar' and created using the jar) When you have downloaded Tuxedo of OTN JCA adapter you have is a RAR file.

  After downloading the RAR file to your local workstation, you need to configure, reconditioning and then you can deploy them.

  Use the following to set up procedure and reconditioning
  1 create a sub-diretory called 'adapts' r in the directory where you downloaded the file com.oracle.tuxedo.TuxedoAdapter.rar
  2 cd of ' adapter
  3 unjar the RAR file
  adapter > jar xvf... /com. Oracle.Tuxedo.TuxedoAdapter.rar
  4. to set up
  1. the downloaded file com.oracle.tuxedo.TuxedoAdapter.rar UN - jar
  2. change the configuration
  2.1 if you wish to use the connection configuration factory founded, then change the META-INF/weblogic - RA.Xml
  2.2 If you want to use the domain configuration file, then change the META-INF/ra.xml and then change dmconfig.xml
  NOTE 1: factory based configuration only supported in 11.1.1.2.1
  NOTE 2: the JNDI name is in META-INF/weblogic - RA.xml and you can change to the JNDI name that you like
  5 renovation
  adapter >... jar cvf MyTuxedoAdapter.rar *.

  Now you are ready to deploy JCA Tuxedo adapter
  There are two ways to deploy it to WLS
  1 use the console to configure it as an application
  NOTE: This is the only way that support the main map. Main mapping configuration is necessary for the propagation of security identity of Tuxedo for access control. (you also need to have a copy in the file of Tuxedo TPUSR locally and configured in the configuration)
  2 copy the RAR file into DOMAIN_HOME/autodeploy directory $

  NOTE: you must replace the JATMI that come with WLS and use the one that come with adapter JCA Tuxedo.

  You can also download the sample of RTO and run the example and check the information listed in the file readme.txt and build.xml ANT script and setenv.sh you can find all the information mentioned above.

• How to deploy ADF Applications to Weblogic Server examples

  Hello
  
  I am a novice ADF and JDeveloper and Weblogic, now I have JDeveloper 10.1.3.3.0 and 10gR 3 of Weblogic Server installed on my machine, could you please teach me how to deploy http://blogs.oracle.com/smuenchadf/examples/ on my Weblogic Server examples?
  
  Thank you very much in advance!
  
  Best wishes
  Jia - Wei

  "Network adapter could not establish the connection.

  do you have create db connection and test?

  There is another way for the deployment.

  create the field of prod, you may need to extend your domain name to include libraries of the adf.
  Start the server administrator
  Goto, wl (http://:console) console create datasource
  Select the tunnel server protocol tab
  Create a connection to the server App (Application Server Browser View menu) in jdev
  Right-click on your App. GoTo Deploy - name of the application - to - new connection
  Run the jspx in the browser (http://:appname-ViewController-context-root/faces/jsfpagename.jspx)

• How to delete multiple addresses?

  How to delete multiple messages at once?

  Have you ever deleted multiple files in both Solution Explorer?
  Thunderbird works the same way.

  Select the first message you want to delete. Press on and hold down SHIFT and select the last message should be deleted. This selects all messages between the first and the last of them.
  The Ctrl key and click on a message, you can select or deselect them individually.
  Then press DELETE to remove all the selected messages.

• How to stop multiple self-switching to the address bar every time I open a new tab and try typing something anywhere outside the address bar?

  How to stop multiple self-switching to the address bar every time I open a new tab and try typing something anywhere outside the address bar? As something just wants me to use this integrated search when you type something non-Web-address in the address bar and press to enter. And the most ridiculous thing is that happens repeatedly on as every second, as I just got off the address bar and start typing again, but still he passes me in the address bar, then 3, 4 times like that. And the result is that I don't see the address of this page.

  I think that its has something to do with my AVG Antivirus, because it started the same time a Nation AVG started to appear in each new tab I opened (and which is irritating as me, I've read here on support.mozilla.org and it seems that the only solution is to completely reinstall Firefox, but I don't want to lose all my settings) but when I type something in the address bar and press enter It opens the search results in Google.

  Please try to help me, I love Firefox but I have to switch to Chrome until I fix this.

  Thanks in advance

  First of all, please update Firefox 32. 22 is no longer support is not safe. So, let us know if you still have this problem. Update Firefox to the latest version

• OfficeJet 6700 how to fax multiple pages?

  I was looking at my manual, but I don't see any information on how to fax multiple pages at a time.  I have to keep the Redial and going though all this, and it will only send one page at a time.  Can anyone here tell me how more than a fax?  It is the 6700 OfficeJet and I usually use the copier part to send it.

  Now when you use the scanner should the page that you want to scan facing upwards or downwards?  I'm confused on this.  Thank you for reading my post.

  I get it now... Thanks a lot for your help.

• How to scan multiple pages into a single document

  I use XP SP3 on the HP 510 laptop and printer HP Photosmart 7510e. How to scan multiple pages in 1 document? PDF is also only available document format?

  Thanks for the tips

  Hello
  
  Please perform the below mentioned steps that should solve the problem.

  Click the icon of the printer (on the desktop), select the scanned under the side of right, notice in the window of advanced settings under file type is a checkbox called "creating a separate file for each scanned page. Make sure it is not checked.

  Kind regards
  Jabzi
  
  Give Kudos to say 'Thank you' by clicking on the White Star under my name.
  
  Click on 'accept as Solution' if it has solved your problem, while others may find it.
  I work for HP

• How can I connect my internal microphone Satellite M40?

  Can someone tell me how can I connect my internal mic in my Satellite M40?

  The manual says there is one, but I tried to record voices and the use of Skype, but nothing is recorded... I've tried to change the settings on audio devices, but nothing happens. Please help, I really need.
  Thank you

  Hello

  Well, check in the settings sounds and Audio--> Audio devices.
  In the section sound recording press the volume key. Check if the Microphone is selected.
  Check the advanced settings. In this section, the internal microphone must be marked.

  Good bye