How to detect the last loaded external item?

Similar Questions

• How to detect the window closing event and to do some tasks before leaving

  Hello

  Someone knows how to detect the window closing event and to do some tasks before leaving?

  Sridhar

  Structure of the event allows to detect the window closing event. In the structure of the event,.

  Select this VI-> close round table for this task. See attached picture.

• How to detect the sign of a number?

  I output which gives the number of negative or positive. My problem is how to detect the sign of the Boolean number and output? For example if the input number is negative as - 23.11 I want to output the value false and if the number is positive as 17.99 I want to output true.

  T H A N K S!

  Test if the number is greater than or equal zero.

• How to detect the key ALT pressed in os7

  Hai,

  How to detect the key ALT pressed in Os7...

  Can I use the source for os 7 as below? ,

  protected boolean keyStatus (int keycode final, time final int) {}

  If (Keypad.key (keycode) == Keypad.KEY_ALT) {}

  ...

  Returns true;

  } else

  Return super.keyStatus (keycode, time);

  }

  and also I want to know which is the return of this method? In detail
  How to detect the other touches also?
  What are the updations or changes in the code, on os6 os7?

  KeyCode is a bit model, if you use "is" to compare you won't get accurate results, you should use the operator '& '.

  See
  http://supportforums.BlackBerry.com/T5/Java-development/detect-ALT-and-shift-key-clicks/Ta-p/444976

• How to upgrade the boot loader?

  We have a Cisco SF300 - 48P 48-Port 10 / 100 PoE switch with Gigabit Uplinks.

  In the documentation for the new 1.3.5.x firmware, it says:

  "Before the upgrade to version 1.3.5 the bootloader must also be updated. If 1.3.5 version using the initial boot loader, file system is not updated to level, and in the future the user will not be able to upgrade to versionshigher than 1.3.5. »

  How to place the boot loader?

  I see nothing in the documents in order to establish what boot loader there.

  We are currently running firmware 1.3.0.62.

  The statistics page says:

  (Image Active) firmware version:	1.3.0.62
  (Non-Active) firmware version:	1.1.2.0
  Version of boot:	1.0.0.4

  What is the best way to properly install this firmware 1.3.5.x?

  Thank you, Tom

  Hello:

  Darren is correct, that you need to update the boot via TFTP code. His instructions are correct for when you get the TFTP server defined and loaded file in it. There are many free TFTP server applications on the net that you can download. One of my favorites for Windows is TFTPD32 (or TFTPD64 for 64-bit machines). There are both free applications Mac but I don't have that I use.

  Once you have a TFTP server installed on your machine, place the file with 'BOOT' in the name of the TFPT Server directory. Directed by Darren: go/file management and select backup/upgrade the Firmware, go to "via TFTP' and select 'Boot Code.' Put the IP address of the server or computer that runs the TFTP software and the name of the file and apply the update.

  Reboot the switch and the bootloader is now updated!

  Then follow the normal procedure for the upgrade of the firmware: go to the file management /-> Firmware Upgrade / Backup-> "via the HTTP protocol' and find your firmware file and apply.

  ~ Nick

  Support of Cisco network engineer

  Please mark responded to post useful!

• How to get the last date of 3 days for the current month?

  Hello. Guy

  How to get the last date of 3 days for the current month?

  MY OUTPUT WOULD LOOK LIKE THIS

  JANUARY 29, 2016

  JANUARY 30, 2016

  JANUARY 31, 2016

  
  

  GUYS HELP ME / / /...
  

  SQL > select last_day (sysdate) - level + 1 double connect by level<= 3="" order="" by="">

  LAST_DAY)

  ---------

  29 JANUARY 16

  30 JANUARY 16

  31 JANUARY 16

• How to take the last 7 digits of a varchar column

  How to take the last 7 digits of a varchar2 colum

  COL1

  12345678

  12345

  1234567890123

  1234567

  Out put should be as below

  COL1

  2345678

  12345

  7890123

  1234567

  everything built in function or in any other way please

  Hello

  assuming that the entry contains only numbers, as in the example, the addition of 7 spaces to the left and selecting the 7 last characters toured:

  with dataset as

  (select col1 from column_value

  table

  (dbmsoutput_linesarray

  ("12345678"

  '12345 '.

  '1234567890123'

  "1234567".

  )

  )

  )

  Select col1

  , substr (lpad (", 7,' ') | col1-7) col1_last7

  of the dataset

  /

  COL1 COL1_LAST7

  -------------------- --------------------

  12345678 2345678

  12345 12345

  1234567890123 7890123

  1234567 1234567

  Rob

• How long is the last free trial?

  How long is the last free trial before purchising?

  The free trial for 30 days.

  Concerning

  Hervé Khare

• How to get the last day of a month for every 2 months for a given period?

  Hello

  Can is it some please let me know how to get the last day, last day of the week, the weekend last day, last Monday, one month for every 2 months for a given period?

  Thanks in advance.

  Try the below

  SELECT LAST_DAY (ADD_MONTHS (TRUNC(startdate,'MM'), ((LEVEL*2)-2))) lastday.

  BOX WHEN TO_CHAR (LAST_DAY (ADD_MONTHS (TRUNC(startdate,'MM'), ((LEVEL*2)-2))), 'DY') = 'SAT '.

  SO LAST_DAY (ADD_MONTHS (TRUNC(startdate,'MM'), ((LEVEL*2)-2)))-1

  WHERE TO_CHAR (LAST_DAY (ADD_MONTHS (TRUNC(startdate,'MM'), ((LEVEL*2)-2))), 'DY') = 'Sun '.

  THEN LAST_DAY (ADD_MONTHS (TRUNC(startdate,'MM'), ((LEVEL*2)-2)))-2

  Of OTHER LAST_DAY (ADD_MONTHS (TRUNC(startdate,'MM'), ((LEVEL*2)-2)))

  END as lastweekday,

  BOX WHEN TO_CHAR (LAST_DAY (ADD_MONTHS (TRUNC(startdate,'MM'), ((LEVEL*2)-2))), 'DY') IN ('Sam', 'SUN')

  THEN LAST_DAY (ADD_MONTHS (TRUNC(startdate,'MM'), ((LEVEL*2)-2)))

  Of OTHER LAST_DAY (ADD_MONTHS (TRUNC(startdate,'MM'), ((LEVEL*2)-2)))

  -(TO_NUMBER (TO_CHAR (LAST_DAY (ADD_MONTHS (TRUNC(startdate,'MM'), ((LEVEL*2)-2))),' from)) - 1).

  END as lastweekendday,

  BOX WHEN TO_CHAR (LAST_DAY (ADD_MONTHS (TRUNC(startdate,'MM'), ((LEVEL*2)-2))), 'DY') = 'MY

  THEN LAST_DAY (ADD_MONTHS (TRUNC(startdate,'MM'), ((LEVEL*2)-2)))

  Of OTHER NEXT_DAY (LAST_DAY (ADD_MONTHS (TRUNC(startdate,'MM'), ((LEVEL*2)-2))), "LUN")-7

  END AS lastmonday

  FROM (SELECT SYSDATE startdate,

  SYSDATE + 300 enddate

  THE DOUBLE)

  CONNECT BY LEVEL<=>

• How to find the last date of execution of the objects in database

  Hi all
  
  We're going for an upgrade of the database 11g and for the same thing, we want to know the last date of the following-
  
  Packages, Tables, views
  Conc. programs / value Sets / look up / profile options
  
  Is there a way we can find the same thing.
  The answers would be really useful.
  
  Kind regards
  Shruti

  So can you provide clues on how to find the last opportunity registration

  I don't think you can find such a script with having activated audit.

  Thank you
  Hussein

• How to revive the last work, then from the APP? Or system restart?

  How to revive the last work, then from the APP? Or system restart?

  EIB zu ADOBE: "geht nicht mehr!  (this function is not longer possible)

• installation stops with a "cannot detect the last level cache.

  ESXi 5.0 installation process stops with a message "cannot detect the last level cache.

  VMware ESXi 5.0.0 [Releasebuild-469512 x86_64]
  Cannot detect the last level cache
  CR0 = 80010039 cr2 = 0 x 0 = 0x3e7000 cr4 = 0 x 2038 cr3
  PCPU0:2048 / bootstrap
  PCPU 0: S
  Beginning of the code: uptime VMK 0 x 418013200000: 0:00:00:00.890
  6 lines of < no symbol > errors
  Basic FS = 0 x 0 gs = 0 x 418040000000 kg = 0 x 0
  No space on disk for the dump data.
  Debugger waiting...

  switching LSI based SAS controller to port sata3 onboard has not changed a thing

  Oh, here the specifications:
  Processor Intel i5 2500
  16 GB OF RAM
  ASUS P8H67-M Board

  any ideas?

  Hi all

  I had the same problem after turning on in BIOS "Max CPUID Value Limit" to activate option.

  Disabling above option help me to install vmware esxi 5.0

  Anatoliy

• How to find the last pasted paragraphs FMP?

  I'm sticking FMP several objects at once in a file (a file of changes to the sections containing the changebars) in the main text flow. I want a separator line to go at the end of each pasted section, so I try to insert one after the paste operation. But instead of a line between each section, all lines are added at the end of the file, after all the sections. So if there are 3 glued sections at the end of the file are three lines. My code is below, do you know how I could fix this?

  Thank you, Mark

  function copyPasteChanges (doc, chgRange) {}

  Select the section with changebar and copy it.

  doc. TextSelection = chgRange;

  doc. Copy();

  Prepare for the changes doc and paste there the modified section.

  var firstChgPgf = changesDoc.MainFlowInDoc.FirstTextFrameInFlow.LastPgf;

  var changesTloc = new TextLoc (firstChgPgf, Constants.FV_OBJ_END_OFFSET);

  var changesTRange = new TextRange (changesTloc, changesTloc);

  changesDoc.TextSelection = changesTRange;

  changesDoc.Paste ();

  To go at the end of the file again (I think)

  var lastPgf = changesDoc.MainFlowInDoc.FirstTextFrameInFlow.LastPgf;

  var dividerPgf = changesDoc.NewSeriesPgf (lastPgf);

  var TLoc = new TextLoc (dividerPgf, 0);

  changesDoc.AddText (TLoc, '_');

  }

  Hi Mark,

  The problem is that the dough does not occur when you think. The dividing line is added at the end of the file, but are not your actions of dough. Actually, I think that maybe a little random where pasta is produced, because this line:

  var changesTloc = new TextLoc (firstChgPgf, Constants.FV_OBJ_END_OFFSET);

  .. .is does not create a valid text location. You can check this by abandoning the service after:

  changesDoc.TextSelection = changesTRange;

  .. and look at where's the insertion point. It will probably be everywhere where you left it last, because the call is not valid. I can't tell you exactly why, except that it has something to do with the fact that you are using the last paragraph in the stream. There is something weird to try to define a range of full-paragraph text with the last paragraph. I'm sure it's related to how the last TFP in a stream does not show a mark of FMP, but beyond that, I don't know how to do what you're trying to do with the last paragraph.

  Having no knowledge of how do it right, any time I need to do this, I create a paragraph "dummy" at the end of the flow to fill that space strange 'last FMP", then do the work around it. In the end, I just want to remove fake TFP. I don't know if it's a good idea or not, but it's the only way I ever get it to work and it sorts the mirror how you could do this manually in the GUI.

  With this, I modified your script as follows, and it seems to work better. Note that I also modified the logic of how to find the last paragraph of the flow by writing a separate function. Your call to the 'FirstTextFrameInFlow' is OK, unless your doc begins to span several pages and/or begins with several empty pages. The function I wrote ensures that you really the last TFP in the stream.

  I hope this helps.

  Russ

  function copyPasteChanges (doc, chgRange) {}

  Select the section with changebar and copy it.

  doc. TextSelection = chgRange;

  doc. Copy();

  Prepare for the changes doc and paste there the modified section.

  var lastPgf = getLastPgf (changesDoc);

  var dummyPgf = changesDoc.NewSeriesPgf (lastPgf);

  var changesTloc = new TextLoc (dummyPgf, 0);

  var changesTRange = new TextRange (changesTloc, changesTloc);

  changesDoc.TextSelection = changesTRange;

  changesDoc.Paste ();

  To go at the end of the file again (I think)

  Don't forget that last TFP is now fake TFP

  lastPgf = getLastPgf (changesDoc);

  var dividerPgf = changesDoc.NewSeriesPgf (lastPgf.PrevPgfInFlow);

  var TLoc = new TextLoc (dividerPgf, 0);

  changesDoc.AddText (TLoc, '_');

  dummyPgf.Delete ();

  }

  function getLastPgf (doc)

  {

  textFrame var is doc. MainFlowInDoc.LastTextFrameInFlow;

  var lastPgf = textFrame.LastPgf;

  While (! lastPgf.ObjectValid () & textFrame.ObjectValid ())

  {

  textFrame = textFrame.PrevTextFrameInFlow;

  lastPgf = textFrame.LastPgf;

  }

  Return lastPgf;

  }

• How to detect the number of created quickobjects

  How to detect the number of quickobjects created? quickobject are quickbox2d.

  Basically, I have a timer that will countdown to 4 seconds and it will create a falling ball, it will get removed when she falls down. However, I want only there so that if more than 5 bullets are in step, it will cease to create until it is less than 5 to start creating some balls again. Is there a way I can do?

  It's the timer to create the ball

  If (! _ballCreation_timer) {}

  _ballCreation_timer = new timer (4000);

  _ballCreation_timer.addEventListener (TimerEvent.TIMER, _onBallCreationTimer);

  }

  _ballCreation_timer. Start();

  Function which create the ball based on clock

  function _onBallCreationTimer (e:TimerEvent): void {}

  _doCreateNewBall();

  }

  function _doCreateNewBall() {}

  _ball_quickobject = sim.addCircle ({x: PHYSICS_SCALE * (960), y: PHYSICS_SCALE * (10), RADIUS: 0.5, draggable: false});

  MAKE A LIST OF BALLS

  _balls_array.push (_ball_quickobject);

  }

  This is the part where if the table (QuickObject) ball falls down and are destroyed

  addEventListener (Event.ENTER_FRAME, _onEnterFrame);

  DRAW EACH BALL FALLING OUT OF THE SCREEN

  function _onEnterFrame (aEvent: Event): void {}

  for each (var quickObject: QuickObject in _balls_array) {}

  BALL FALLING OUT OF THE SCREEN?

  If (quickObject.y / PHYSICS_SCALE > 1080) {}

  _doHandleBallOffScreen (quickObject);

  }

  }

  }

  DESTROY THE BALL FALL OFF THE SCREEN IF

  function _doHandleBallOffScreen (aQuickObject: QuickObject): void {}

  DESTROY THE OBJECT

  aQuickObject.destroy ();

  REMOVE FROM THE CUSTOM TABLE

  _balls_array.splice (_balls_array.indexOf (aQuickObject), 1);

  }

  check the length of _balls_array.  If it is greater than 5, do not create another bullet:

  If (! _ballCreation_timer) {}

  _ballCreation_timer = new timer (4000);

  _ballCreation_timer.addEventListener (IMER TimerEvent.T, _onBallCreationTimer);

  }

  _ballCreation_timer. Start();

  Function which create the ball based on clock

  function _onBallCreationTimer (e:TimerEvent): void {}

  _doCreateNewBall();

  }

  function _doCreateNewBall() {}

  If (_balls_array.length<>

  _ball_quickobject = sim.addCircle ({x: PHYSICS_SCALE * (960), y: PHYSICS_SCALE * (10), RADIUS: 0.5, draggable: false});

  MAKE A LIST OF BALLS

  _balls_array.push (_ball_quickobject);

  }

  }

  This is the part where if the table (QuickObject) ball falls down and are destroyed

  addEventListener (Event.ENTER_FRAME, _onEnterFrame);

  DRAW EACH BALL FALLING OUT OF THE SCREEN

  function _onEnterFrame (aEvent: Event): void {}

  for each (var quickObject: QuickObject in _balls_array) {}

  BALL FALLING OUT OF THE SCREEN?

  If (quickObject.y / PHYSICS_SCALE > 1080) {}

  _doHandleBallOffScreen (quickObject);

  }

  }

  }

  DESTROY THE BALL FALL OFF THE SCREEN IF

  function _doHandleBallOffScreen (aQuickObject: QuickObject): void {}

  DESTROY THE OBJECT

  aQuickObject.destroy ();

  REMOVE FROM THE CUSTOM TABLE

  _balls_array.splice (_balls_array.indexOf (aQuickObject), 1);

  }

• How to get the last day of the week?

  HII
  
  I can get the week number of calendar for a given date using
  
  SELECT to_char (to_date('04/04/2011','MM/DD/YYYY'), 'WW') FROM dual
  
  can any body tell me, how to get the last day of the week?
  
  and the answer should be: 04/08/2011(8th april)
  Thank you
  San
  
  Published by: sandeep9 on April 4, 2011 03:50

  Perhaps this...

  SQL> select trunc(sysdate,'WW')+6 from dual;
  
  TRUNC(SYSDATE,'WW')+
  --------------------
  08-APR-2011 00:00:00
  
  SQL>