How to disable the change in the excel output file

Similar Questions

• How to run the rman output files, which are more days of retention

  I use for my rman backup tasks.

  I have format my output files of rman to a specific path, instead of the fast recovery area.

  Also, I spend below command in RMAN

  RMAN > CONFIGURE RETENTION POLICY to RECOVERY OF 7-DAY WINDOW;

  And the "control_file_record_keep_time" parameter is also set to 7.

  I've been running rman for 8 days. Everything seems good. But I find several rman output files are more than 7 days.

  So, I just want to know how to handle the rman output, which is longer than 7 days files?

  In fact, I assumed that these older files should be obsolete files, but rman is not to declare that they are obsolete.

  So how do now?

  user8710670 wrote:

  I use for my rman backup tasks.

  I have format my output files of rman to a specific path, instead of the fast recovery area.

  Also, I spend below command in RMAN

  RMAN > CONFIGURE RETENTION POLICY TO RECOVERY OF 7-DAY WINDOW;

  And the "control_file_record_keep_time" parameter is also set to 7.

  I've been running rman for 8 days. Everything seems good. But I find several rman output files are more than 7 days.

  So, I just want to know how to handle the rman output, which is longer than 7 days files?

  In fact, I assumed that these older files should be obsolete files, but rman is not to declare that they are obsolete.

  So how do now?

  Windows 7 day average recovery rman will protect everything necessary for the recovery to any point in time in the last 7 days.  In fact, in the last 604800 seconds.  The same will mean that he need the files OLDER than that.  Simply because a backupset is older that your recovery window does NOT as yet, it is obsolete.  Any recovery begins with the last FULL or INCREMENTAL backup ZERO before the recovery point.  And it does not matter how old the backup is, it will be obsolete.  Suppose you take a level 0 backup, 1 January and for the rest of the year taking nothing but level 1 and backup archivelog.  31 December than and only the full backup will still not be obsolete, even though he is a year old.

  ============================================================================

  removal of the obsolescence of RMAN

  Day 1 - level 0

  Day 2 - level 1

  Day 3 - level 1

  Day 4 - level 1

  Day 5 - level 1

  Day 6 - level 1

  Day 7 - level 1

  Day 8 - level 0

  Day 9 - level 1

  Day 10 - level 1

  Day 11 - level 1

  Day 12 - level 1

  Day 13 - level 1

  Day 14 - level 1

  On day 14, your window of 7 days is up to date 7.  A recovery to date must begin by restoring the backup of level 0 of the day 1. So it may be outdated.  Some level 1 between 1 and 6 days backups might be obsolete, depending on if they are incremental or cumulative, and it also happens with archivelogs.

  If you have access to MOS, you can review the notes 462978.1 and 463875.1.

  ============================================================================

• How to disable the sharing of files between the host and guest XP PRO?

  Hello my setup is:

  Host of XP PRO and XP PRO comments using NAT.

  How to disable file sharing between the host and guest (do not want to view or access the file share on host comments)?

  In the comments

  I tried to disable simple file sharing in folder options and uninstall

  File sharing and printing of LAN properties but can always see and have access to the

  Organizing actions of folder...

  Help please!

  Then you will need to disable "Microsoft File and Printer sharing" or you need to set restrictions with the GPO. As long as the systems have their default values the value of a Microsoft network allows to use actions.

  If you found this information useful, please consider awarding points to 'Correct' or 'Useful' answers and answers. Thank you!!

• Disable the break control file

  Please can someone tell me how to disable the breaking control file that is attached to a data definition, it is no longer necessary for this definition of data...

  I need an option without re-creating the data definition

  Concerning

  Check this https://community.oracle.com/thread/1027694

• How to disable the change (the value read-only) on an editable Table cell?

  Hi friends
  How to disable the change on an editable on certain conditions Table cell?
  are there example links?
  concerning
  
  Published by: sak on December 22, 2009 11:28

  No, in the apex_item attributes for example

  select
    APEX_ITEM.CHECKBOX(1,empid,nvl(empid,'readonly')) test
  from emp
  

  Shunt

• HP Probook 650 G1: How to disable the keys way to Probook 650 G1 running Windows 7, 64-bit

  I just bought a HP Probook G1, intel i7 650 - 4600 m, system BIOS 01.34-08/28/2015, keyboard review KBC 16.3 C version.

  ESC and F1 through F12 function keys seem to be in the Mode of action key (for example flight gives HP, F6 system information allows you to change the audio levels, etc.)- and I prefer to keep the standard functions of these keys (for shortcuts in Word and Excel, also for Express Scribe transcription software).

  I found Ctrl + Fn + the function key corresponding is workaround to achieve some (but not all) the standard functions - but which is cumbersome when used frequently. Workaround doesn't seem to work for the ESC key.

  I saw a few tips on how to disable the Mode keys on some laptops HP - eg
  http://support.HP.com/au-en/document/c02035108

  - and I have used this method on the previous laptop HP (e.g. Pavilion G6), but it does not work for this Probook. The configuration screen of the BIOS on my new machine does not seem to show the key Action Mode (or same System Configuration) as an option.

  I would be grateful for suggestions.

  Problem is now resolved, thanks to HP Technical Support phone line. Their tips were:

  * go to the BIOS Setup in the usual way (shut down, then power on, press ESC, choose F10 for Bios configuration)

  * Choose the Information System

  * arrow above to advance

  * Choose the Configuration of the device

  * Uncheck the Fn key switch

  * Save, etc.

  The corresponding option is more referred to Action Mode button for this model of HP laptop, at least not for the version of BIOS this Probook 650 G1 (worm 1.36, 25/04/2016).

• How to disable the scaling software IPR and PPP compatible as Microsoft Office.

  original title: scaling software IPR and PPP compatible as Microsoft Office.
   
  Hello!
  Does anyone know how to disable the scaling of the DPI (or how custom scale) in IPR software compatible?
  In particular, how can I disable display picture in "Microsoft Office 2010"?
  Disable in properties of control does not work as it does for non-Microsoft programs.
  I have a screen 1440 x 900, and for most of the tasks, I prefer the screen so it should be about 4' of me usually use scaling of IPR. The problem is that in MS Office, the Ribbon of the toolbar > 25% of the screen on this setting. Hide the Ribbon is an option, but if I could selectively disable scaling (as I do with the chrome) - all my problems could be solved.
  Thanks for the advice/input!
  Rich

  Thank you for your empty insulting response. I wonder if your answer is just an automated response.

  Well, I was going to answer the Fahimulla K and politely point out that they may have misunderstood your question because you seem to have the "how-to" down to "Disable the display timing of high DPI settings" in the compatibility of most of the Programs tab.  So say what you said apparently is that Microsoft Office 2010 programs do not seem to allow that (the selection isn't activated - grey - so you cannot select)- but you have decided to go in a different direction (more rude/crude) before I got the chance.

  It will not win you a favor here - it is above all a forum for peer-to-peer (user to user).  Politeness a bit for the people spend their time (and as far as I know - the real Employees from Microsoft that poster here do still their choice, not obligation) goes a long way.  A little profanity goes even further - but not in the desired direction.  * smile *.

  However, I had planned on looking into this because he was intrigued, so despite the generally rude responses by you in the two posts, I found you so far - I'll post the results of my research (and my job steps) here in case it might be useful to someone.  I'll probably respond to the other post and a link to this post as well.

  At this stage, while having access to several computers, some with Office 2007 again and others with Office 2010 32 bit, I had not found the time to test and see if it is linked to all Office 2010 64-bit or not.  I confirmed that this setting does not seem to be available in Windows 7 (64 bit) for individual products Microsoft Office 2010 (64-bit versions.)

  An interesting thing I found in the Microsoft Knowledge Base has been "scale of the graphical object Microsoft Graph is reduced inside the bounding box when you insert it into a workbook in Excel" where they actually change you the setting in the Task Manager process tab-->.  This doesn't seem to work (not yet available) for common products (Word, Excel, etc.) as he says he does it to the CHART. EXE.

  So by doing research and without more information from you (such as possibly critical details that you probably have Windows 7 64-bit and 64-bit Microsoft Office 2010) and tests on one machine 64-bit Windows 7 but 32-bit Office 2010 - I note the checkboxes in the compatibility settings are available.  I first thought about this possibility when I noticed a part of this article:
  http://www.SevenForums.com/tutorials/316-compatibility-mode.html
  ... when they say, ' "NOTE: If the compatibility options are grayed out, then it is a 64-bit program and cannot be changed.".

  So - I would say the second part of the answer of the Fahimulla K would be a great place to start (and you did, looking at this post from you in the forums Microsoft Office... about a minute after the display of it here.)

  I think that you maybe isn't luck if - * if * you run the 64-bit version of Office 2010 that is.  Even Microsoft (for a long time - maybe still) recommended and installed Office 2010 32-bit default products.

  • http://social.technet.Microsoft.com/forums/en/Office2010/thread/40d17c38-90e0-48D9-8F83-d9721a24b063
  • http://Office.Microsoft.com/en-us/Word-help/choose-the-32-bit-or-64-bit-version-of-Microsoft-Office-HA010369476.aspx

  Not for the reason will be addressed during the conversation; even though it is an interesting puzzle and would not be limited to just Microsoft Office - but any 64-bit application, you can install.  Their idea was that in general there is some 64-bit plugins and same problem with 32-bit plugins that existed / exist for Microsoft Office.

  My suggestion, if my hypothesis about what architecture of Microsoft Office that you have installed is correct, would be to uninstall Microsoft Office 2010 64 bit and install Microsoft Office 2010 32-bit.

  Hope that helps someone.

• I don't have a message to tell me the image my takes up screen is set to full screen. How to disable the who and the fade slow when he goes to fs?

  In Firefox 42

  When a site like youtube when I make the video fullscreen it just melted slow useless when it does. And then tells me that it is full screen. I know that it is full screen for two reasons. One, I hit the button fullscreen. Two, the video takes up my entire screen. The message point. Use the fade. How can I disable them?

  To disable the fade, you can change these preferences of the topic: config page.

  • full-screen - api .transition - duration.enter: "0 0".
  • full-screen - api .transition - duration.leave: "0 0".

  You can open the topic: config page via the address bar.
  You can accept the warning and click on "I'll be careful" to continue.

  • http://KB.mozillazine.org/about:config

  I do not know how to disable the warning, but it might be possible to hide this message with code to userChrome.css or elegant.
  This message is displayed for security reasons because a malicious script can switch to full screen mode and take over the entire window without noticing you (i.e. show a fake office).

• How to disable the App tabs (tablets should) start automatically?

  How to disable the App tabs (tablets should) start automatically?

  because the option [don't load the tabs up to choosing] dose does not work with her, and she keeps starts every time when I restart Firefox.

  Please help me!

  Don't bother, I arrived at the solution of my car, you can do the following:

  Type "subject: config" [without quotes!] in the location Bar (address bar) and press ENTER to display the list of preferences, as shown in the photo #1 in Firefox 17 under Windows 7.

  If you see a page with the warning as pictured #2, this might void your warranty!, click the "I'll be careful, I promise!" button to continue (in fact, there is no guarantee that it is, it's more a joke to ensure that users are aware of what they are about to do). Uncheck the box to avoid the warning in the future.

  Now to the search bar in the image #3 type: tab and search for it

  preference name:
  

  Browser.sessionstore.restore_pinned_tabs_on_demand

  or you can copy directly to the search bar.
  Then, follow the instructions in the photo n ° 3 .

  Just in case where if the photo appears, follow these steps:

  First: Right-click on the name of the preference that we sought.
  Then, click Toggle to change the value from false to true.
  Or, double-click it and it will change.
  Finally, restart Firefox, and you'll notice that they don't automatically load until you click on it.

  That's it, good luck to all. ;-)

  Note: the list of fonts preferences fat is the user changed, and the United Nations-fat is the default setting.

  Warning: change preferences can, in rare circumstances, break Firefox, Thunderbird or Mozilla Suite, or cause strange behavior. Only do if you know what you're doing or trustworthy tips.

  Additional INFORMATION:

  Subject: config is a feature of Mozilla applications which lists application settings (known as preferences) that are read from the profile files prefs.js and user.js and the default application. A lot of these preferences are not present in the preferences or Options dialog box. Using about: config is one of the many methods of changing the preferences and adding the other 'hidden '.

• How to disable the initials (preview) in the mail?

  Anyone know how to disable the e-mail feature that shows a preview of the user in a circle (or initials)? I looked everywhere, but the only solution I found is to know how to remove my photo in my touch to change the preview of my initials.  I don't want that.  I want the circle completely gone.  Someone knows a way to do this?

  There is no way to turn it off.

• 5102na HP OMEN: how to disable the audio correction Bang & Olufsen horrible?

  Is there someone who could tell me please how to disable the audio correction Bang & Olufsen? I'm sure that some people like it but I work with audio and I can't really how it changes the sound. I tried to open the Bang & Olufsen sign but I cannot unselect the correction in the section "listening experience", nor that I can change the associated equalization. Please someone help, thanks!

  I found a solution: http://h30434.www3.hp.com/t5/Notebook-PC-Sound-and-Audio/Beats-Audio-compression-and-volume-fluctuation-HP-ENVY-m6/m-p/5137867/highlight/true#M67144

  1. Go to the Windows Device Manager > sound, video and game controllers section.
  2. In the list of the audio device drivers, look for Realtek High Definition Audio. This is the device driver for BeatsAudio (a bit sneaky, wouldn't you say?).
  3. Right-click and select disable. Down arrow on this driver, indicating it is disabled. (NOTE: at this point, you will not be able to play music files.)
  4. Right click and select Update driver software.
  5. Select Browse my computer for driver software.
  6. Select Let me pick from a list of drivers for devices on my computer.
  7. You should see a window that says Select the driver to install for this hardware device. NOTE: If you see a window that says something like This is the best driver for this device, close the window and repeat steps 4, 5 and 6.
  8. In the scheme box, select Audio device high definition (this is the device driver audio substitute) and click Next.
  9. In the Update driver warning window, click Yes. You should see a confirmation with the high definition Audio Device display window. Click on Close.
  10. In the list of drivers of audio device in the section audio, video and game controllers, you will notice that the high definition Audio device now displays instead ofHigh Definition Audio Realtek.
  11. When prompted to restart, click Yes.
  12. Now enjoy your music with no compression!

  Thanks to SteveCT99

  This does not disable audio-Bang & Olufsen, but I just installed this EQ across the system instead: http://sourceforge.net/projects/equalizerapo/

  HP needs to release a driver which allow us access to the "Improvements" tab so we can turn off "Loudness equalization" (although "Loudness equalization" should not be on by default in the first place).

  The current driver is default.

• How to disable the backlight on the keypad for the Qosmio X 70-A-120

  Please, do you know how to disable the backlight on the keypad for the QOSMIO X 70-A-120?

  Concerning

  Open "assist Office > function key" and you will find the option of keyboard backlight. Change in status OFF and t should be disabled.

  Check it out.

• How to disable the setting button in Tools - Options - advanced - network of windows registry?

  Dear support,
  Now, my office has use Firefox as default browser to access the Web server. And there is a policy that users must use ProxyServer. I don't want to change user setting in Firefox proxy. How to disable the setting button in Tools - Options - advanced - network of windows registry?
  Thank you.
  Treky

  You cannot use the Windows registry to disable the elements in Firefox. This link shows how to lock the proxy settings of Firefox, change the values as needed:
  http://www.stbernard.com/ip5kb/iPrism/whatsnew/50SupportFiles/SupportFiles/IP0460.htm

  A change of minor importance, in step 4, instead of add this line to all-js, you can create a file called local - settings.js containing the indicated line and save the file in the same folder as all.js

• How to disable the Apple Photos

  How to disable the Apple Photos when importing photos (ambient light).

  There are two ways:

  1. When you connect your camera or your iPhone to your Mac and your Photos opens go to the import window and uncheck this box:

  

  However, if you use a device with a memory card and reformat card Photos will think it's another camera and Photos will be open again.

  2. to disable form opening automatically when any camera is attached permanently to Photos, iPhoto or Image Capture paste the command following in the Terminal window, followed by the return key or enter:

  defaults write currentHost - com.apple.ImageCapture disableHotPlug - bool YES

  Change Yes to no reverse the order

  

• How to disable the display of paper on Yoga?

  No matter what the settings are used in environments of Lenovo, my screen goes yellow piss after start upward. So, I have to manually change it back to normal. How to disable the display of this paper?

  Solved this problem. I just uninstall and then reinstalled parameters of lenovo. Now the screen keeps shcheme of appropriate color.